MyKey™
4. Press Yes if you want to create the key
CLEARING ALL MYKEYS
as a MyKey. A confirmation message
appears on the screen.
When you clear your MyKeys, you remove
all restrictions and return all MyKeys to
their original admin key status at once. To
clear all MyKeys of all MyKey settings, use
the touchscreen.
5. Switch the ignition off.
You have successfully created a MyKey.
Make sure you label it so you can
distinguish it from the admin keys.
1. Switch the ignition on using an admin
You can also program configurable
key.
settings for the key.
2. Access the main menu in the
touchscreen and then scroll through
the menus to begin clearing your
MyKey programming. See Settings
(page 464).
Programming and Changing
Configurable Settings
Use the touchscreen to access your
configurable MyKey settings.
3. Follow the instructions in the display.
1. Switch the ignition on using an admin
key or the remote control you want to
program.
2. Access the main menu in the
information display and then scroll
through the menus to change the
settings of your MyKey. See Settings
(page 464).
4. A confirmation message appears in the
display after you finish clearing your
MyKeys.
Note: When you clear your MyKeys, you
remove all restrictions and return all MyKeys
to their original admin key status. You
cannot remove the MyKey restrictions
individually.
3. Follow the instructions in the
touchscreen.
CHECKING MYKEY SYSTEM
STATUS
You can find information about your
programmed MyKeys by using the
touchscreen. See Settings (page 464).
The programmed restrictions apply when
you switch the vehicle off, open and close
the driver door and restart your vehicle with
the programmed key or remote control.
Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
need an admin key to change or clear your
MyKey settings. When you make any
changes to your MyKey settings, you change
the settings for every MyKey. You cannot
make individual changes to apply to specific
MyKeys.
MyKey Distance
Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to clear all MyKeys. If the distance does
not accumulate as expected, then the
intended user is not using the MyKey, or an
admin key user recently cleared and then
recreated a MyKey.
66
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing
