Maintenance
1. Lift the wiper arm and then press the
ADJUSTING THE HEADLAMPS
Vertical Aim Adjustment
wiper blade locking button.
2. Remove the wiper blade.
3. Install in the reverse order.
If your vehicle has been involved in an
accident, have the alignment of your
headlamps checked by an authorized
dealer.
Note: Make sure that the wiper blade locks
into place.
Rear Window Wiper Blade
Headlamp Aiming Target
Note: Do not hold the wiper blade when
lifting the wiper arm.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
1. Lift the wiper arm.
3
E142592
A
B
C
D
8 feet (2.4 meters)
Center height of lamp to ground
25 feet (7.6 meters)
Horizontal reference line
Vertical Aim Adjustment Procedure
2
E130060
1. Park your vehicle directly in front of a
wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.
2. Slightly rotate the wiper blade.
3. Disengage the wiper blade from the
wiper arm.
2. Measure the height of the headlamp
bulb center from the ground and mark
an 8 foot (2.4 meter) horizontal
reference line on the vertical wall or
screen at this height.
4. Remove the wiper blade.
5. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
Note: To see a clearer light pattern for
adjusting, you may want to block the light
from one headlamp while adjusting the
other.
187
Fiesta (CCT), enUSA, Second Printing
English 