Maintenance -> Changing a Bulb - 5-Door for Your Ford Fiesta 4 Door Sixth Generation (2009-2016)

Maintenance  
1. Press the side of the cover to release  
the clips.  
2. Remove the cover.  
3
4
3
2
E161667  
Note: You cannot separate the fog lamp  
bulb from the bulb holder.  
E112778  
2. Using a suitable implement, remove  
the cover.  
3. Remove the bulb and bulb holder.  
Remove the bulb.  
3. Remove the screws.  
4. Remove the lamp.  
Front Fog Lamps  
6
1
E161665  
1. Remove the retaining clips to gain  
access to the lamp assembly.  
5
E161670  
5. Disconnect the electrical connector.  
191  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
6. Turn the bulb holder counterclockwise  
Reversing Lamp  
and remove it.  
Rear Lamps  
Brake, Tail and Direction Indicator  
Lamps  
1
1. Remove the trim and disconnect the  
electrical connector.  
2. Loosen the wing nut and carefully pull  
out the rear lamp.  
E113384  
1. Remove the trim panel and disconnect  
the electrical connector.  
3
2
1
E161816  
3. Unclip the bulb holder and remove it.  
4. Remove the bulb.  
E161817  
2. Loosen the wing nut and carefully pull  
out the rear lamp.  
A
E161793  
192  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
Interior Lamp  
2
3
4
1
E99452  
E163004  
1. Carefully remove the lamp.  
3. Turn the bulb holder counterclockwise  
and remove it.  
2. Turn the bulb holder counterclockwise  
and remove it.  
4. Remove the bulb.  
3. Remove the bulb.  
Center High Mounted Stop Lamp  
Reading Lamps  
Note: The LED board is not a serviceable  
item, please consult your dealer if this fails.  
2
3
License Plate Lamp  
2
1
1
3
E99453  
1. Carefully remove the lamp.  
E72789  
2. Turn the bulb holder counterclockwise  
and remove it.  
1. Carefully release the spring clip.  
2. Remove the lamp.  
3. Remove the bulb.  
3. Turn the bulb counterclockwise and  
remove it.  
193  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
Luggage Compartment Lamp,  
Footwell Lamp and Liftgate Lamp  
D
C
A
B
E159827  
A
B
C
D
Side marker  
Headlamp low beam  
Headlamp high beam  
Direction indicator  
Side Marker  
E72784  
1. Remove the headlamp. See  
1. Carefully pry out the lamp.  
2. Remove the bulb.  
Removing a Headlamp (page 188).  
A
CHANGING A BULB - 5-DOOR  
WARNINGS  
Switch the lamps and the ignition off.  
Let the bulb cool down before  
removing it.  
Do not touch the glass of the bulb.  
E161707  
Note: Only fit bulbs of the correct  
specification.  
2. Remove the bulb holder.  
3. Remove the bulb.  
Note: The following instructions describe  
how to remove the bulbs. Fit replacements  
in the reverse order unless otherwise stated.  
Headlamp Low Beam  
1. Remove the headlamp. See  
Removing a Headlamp (page 188).  
Headlamp  
Note: Remove the covers to gain access to  
the bulbs.  
194  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
Direction Indicator  
1. Remove the headlamp. See  
Removing a Headlamp (page 188).  
2
4
E146803  
3
2. Remove the cover.  
3. Disconnect the electrical connector.  
4. Release the clip and remove the bulb.  
Note: Do not touch the glass of the bulb.  
E146805  
2. Turn the bulb holder counterclockwise  
and remove it.  
Headlamp High Beam  
3. Gently press the bulb into the bulb  
holder, turn it counterclockwise and  
remove it.  
1. Remove the headlamp. See  
Removing a Headlamp (page 188).  
Side Direction Indicator  
2
1
2
3
E146804  
2. Remove the cover.  
3. Turn the bulb counterclockwise and  
remove it.  
Note: Do not touch the glass of the bulb.  
E112777  
195  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
1. Press the side of the cover to release  
the clips.  
2. Remove the cover.  
3
4
3
2
E161667  
Note: You cannot separate the fog lamp  
bulb from the bulb holder.  
E112778  
2. Using a suitable implement, remove  
the cover.  
3. Remove the bulb and bulb holder.  
Remove the bulb.  
3. Remove the screws.  
4. Remove the lamp.  
Front Fog Lamps  
6
1
E161665  
1. Remove the retaining clips to gain  
access to the lamp assembly.  
5
E161670  
5. Disconnect the electrical connector.  
196  
Fiesta (CCT), enUSA, Second Printing  
Maintenance  
6. Turn the bulb holder counterclockwise  
and remove it.  
B
A
Rear Lamps  
1
C
E146871  
4. Gently press the bulb into the bulb  
holder, turn it counterclockwise and  
remove it.  
E102854  
A. Indicator  
1. Remove the screws.  
B. Tail and brake  
C. Reverse  
Center High Mounted Stop Lamp  
Note: The LED board is not a serviceable  
item, please consult your dealer if this fails.  
License Plate Lamp  
2
2
1
E161671  
3
2. Disconnect the electrical connector.  
3. Turn the bulb holder counterclockwise  
and remove it.  
E72789  
1. Carefully release the spring clip.  
2. Remove the lamp.  
3. Turn the bulb counterclockwise and  
remove it.  
197  
Fiesta (CCT), enUSA, Second Printing