Maintenance
3. Turn on the low beam headlamps to
5. Locate the vertical adjuster on each
headlamp. Using a Phillips #2
illuminate the wall or screen and open
the hood.
screwdriver, turn the adjuster either
clockwise or counterclockwise in order
to adjust the vertical aim of the
headlamp. The horizontal edge of the
brighter light should touch the
horizontal reference line.
6. Close the hood and turn the lamps off.
Horizontal Aim Adjustment
Horizontal aim is not required for this
vehicle and is not adjustable.
E142465
REMOVING A HEADLAMP
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the right hand
portion of the beam pattern. If the top
edge of the high intensity light zone is
not at the horizontal reference line,
adjust the headlamp.
1. Open the hood. See Opening and
Closing the Hood (page 177).
2
E146878
2. Remove the screws.
E156848
188
Fiesta (CCT), enUSA, Second Printing
English 