Get Transmission Guide for Ford Fiesta 4 Door Sixth Generation (2009-2016)

Transmission

2. Fully depress the clutch pedal then

MANUAL TRANSMISSION -

1.6L DURATEC-16V TI-VCT

(SIGMA)/1.0L ECOBOOST™

start the engine.

3. Press the brake pedal and shift the

gearshift lever to first or reverse gear.

4. Release the parking brake and slowly

release the clutch pedal while slowly

pressing on the accelerator.

Using the Clutch

Note: Failure to fully depress the clutch

pedal to the floor may cause increased shift

efforts, prematurely wear transmission

components or damage the transmission.

During each shift, make sure you fully

depress the clutch pedal.

Recommended Shift Speeds

Note: Do not drive with your foot resting on

the clutch pedal or use the clutch pedal to

hold your vehicle at a standstill while

waiting on a hill. These actions will reduce

the life of the clutch and could nullify a

clutch warranty claim.

Note: Do not shift the gearshift lever to first

gear when your vehicle is moving faster than

15 mph (24 km/h). This will damage the

clutch.

We recommend you change gear

according to the following guide to achieve

the best fuel economy for your vehicle.

Shift from

Recommended

speed

1 - 2

15 mph (24 km/h)

24 mph (38 km/h)

32 mph (51 km/h)

43 mph (70 km/h)

2 - 3

3 - 4

4 - 5

E157512

Manual transmission vehicles have a

starter interlock that prevents cranking the

engine unless the clutch pedal is fully

depressed.

Reverse

Note: Do not shift the gearshift lever to

reverse gear when your vehicle is moving.

This can cause damage to the transmission.

Starting Your Vehicle

WARNING

1. Fully depress the clutch pedal to

disengage clutch.

Make sure the floor mat is positioned

correctly so that it does not interfere

with the full extension of the clutch

pedal.

2. Shift the gearshift lever to the neutral

position and wait at least three

seconds before moving it to reverse.

1. Make sure the parking brake is fully set

and shift the gearshift lever to the

neutral position.

122

Fiesta (CCT), enUSA, Second Printing

Transmission

If reverse gear is not fully engaged, press

the clutch pedal down and shift the

gearshift lever to the neutral position.

Release the clutch pedal for a moment,

depress the clutch again and shift the

gearshift lever to reverse.

Parking Your Vehicle

WARNING

Do not park your vehicle with the

gearshift lever in the neutral position.

Your vehicle may move unexpectedly

and injure someone. Shift the gearshift

lever to first gear and set the parking brake

fully.

E144954

Manual transmission vehicles have a

starter interlock that prevents cranking the

engine unless the clutch pedal is fully

depressed.

Starting Your Vehicle

WARNING

To park your vehicle:

1. Press the brake pedal and shift the

gearshift lever to the neutral position.

Make sure the floor mat is positioned

correctly so that it does not interfere

with the full extension of the clutch

pedal.

2. Fully apply the parking brake and

switch the ignition off.

3. Hold the clutch pedal down, and shift

the gearshift lever to first gear.

1. Make sure the parking brake is fully set

and shift the gearshift lever to the

neutral position.

MANUAL TRANSMISSION -

1.6L ECOBOOST™

2. Fully depress the clutch pedal then

start the engine.

Using the Clutch

3. Press the brake pedal and shift the

gearshift lever to first or reverse gear.

Note: Failure to fully depress the clutch

pedal to the floor may cause increased shift

efforts, prematurely wear transmission

components or damage the transmission.

4. Release the parking brake and slowly

release the clutch pedal while slowly

pressing on the accelerator.

Note: Do not drive with your foot resting on

the clutch pedal or use the clutch pedal to

hold your vehicle at a standstill while

waiting on a hill. These actions will reduce

the life of the clutch and could nullify a

clutch warranty claim.

During each shift, make sure you fully

depress the clutch pedal.

Recommended Shift Speeds

Note: Do not shift the gearshift lever to first

gear when your vehicle is moving faster than

15 mph (24 km/h). This will damage the

clutch.

123

Fiesta (CCT), enUSA, Second Printing

Transmission

We recommend you change gear

according to the following guide to achieve

the best fuel economy for your vehicle.

If reverse gear is not fully engaged, press

the clutch pedal down and shift the

gearshift lever to the neutral position.

Release the clutch pedal for a moment,

then raise the collar and shift the gearshift

lever to reverse again.

Shift from

Recommended

speed

Parking Your Vehicle

WARNING

1 - 2

12 mph (19 km/h)

23 mph (37 km/h)

32 mph (51 km/h)

41 mph (66 km/h)

42 mph (67 km/h)

2 - 3

3 - 4

4 - 5

5 - 6

Do not park your vehicle with the

gearshift lever in the neutral position.

Your vehicle may move unexpectedly

and injure someone. Shift the gearshift

lever to first gear and set the parking brake

fully.

Reverse

To park your vehicle:

Note: Do not shift the gearshift lever to

reverse gear when your vehicle is moving.

This can cause damage to the transmission.

1. Press the brake pedal and shift the

gearshift lever to the neutral position.

1. Fully depress the clutch pedal to

disengage the clutch.

2. Fully apply the parking brake and

switch the ignition off.

2. Shift the gearshift lever to the neutral

position and wait at least three

3. Hold the clutch pedal down, and shift

the gearshift lever to first gear.

seconds before moving it to reverse.

3. Raise the collar below the gearshift

lever to shift to reverse gear.

AUTOMATIC TRANSMISSION

Note: This is a lockout feature which

protects the transmission from accidentally

engaging reverse gear when intending to

select first gear.

WARNINGS

Always set the parking brake fully

and make sure the gearshift is

latched in P (Park). Turn the ignition

to the off position and remove the key

whenever you leave your vehicle.

Do not apply the brake and

accelerator pedals simultaneously

for more than three seconds as this

limits engine rpm and labors the

transmission. This may result in difficulty

maintaining speed in traffic and could lead

to serious injury.

E99067

124

Fiesta (CCT), enUSA, Second Printing

Transmission

Note: When you switch the ignition off, the

+

-

Manual shift up

transmission will carry out a series of checks.

You may hear slight clicking sounds. This is

normal.

Manual shift down

Press the button on the front of the

transmission selector lever to change to

each position.

We have designed your vehicle to improve

fuel economy by reducing fuel usage

compared to a traditional torque converter

automatic transmission. When you take

your foot off the accelerator pedal and

your vehicle begins to slow down, this can

feel like a light to medium braking

sensation.

The transmission selector lever position

will be shown in the information display.

P (Park)

WARNINGS

You must only select P when your

vehicle is stationary. Selecting P

when your vehicle is moving will

damage the transmission and may lead to

an accident or injury.

Selector Lever Positions

WARNING

You must press the brake pedal to

apply the brakes before moving the

transmission selector lever. Failure

to keep the brakes applied until you are

ready to move off may lead to an accident

or injury.

You must move the transmission

selector lever to position P and fully

apply the parking brake before you

leave your vehicle. Failure to leave your

vehicle securely parked may lead to an

accident or injury.

Your vehicle will not move while the

transmission selector lever is in P. You can

start the engine with the transmission

selector lever in this position.

Note: An audible warning will sound if you

open the driver's door and you have not

moved the transmission selector lever to

park.

R (Reverse)

WARNING

You must only select R when your

vehicle is stationary and the engine

is at idle speed. Selecting R when

your vehicle is moving or at a high engine

speed will damage the transmission or

lead to an accident or injury.

E161746

P

R

N

D

S

Park

Reverse

Neutral

Drive

Sport mode or manual shifting

125

Fiesta (CCT), enUSA, Second Printing

Transmission

With the transmission selector lever in R,

Sport mode will remain on until you either

shift manually up or down the gears using

the + or - buttons on the side of the

transmission selector lever or you move

the transmission selector lever to drive.

power is transmitted to the drive wheels

to allow your vehicle to move backward.

You cannot start the engine with the

transmission selector lever in this position.

Note: Always come to a complete stop

before shifting the transmission selector

lever out of reverse.

When you use Sport mode it provides a

downshift function. See Downshift in this

section.

N (Neutral)

Manual Shifting

WARNING

With the transmission selector lever in N,

power is not transmitted to the drive

wheels and the transmission is not locked,

it is possible your vehicle will move if the

brakes are not applied. You can start the

engine with the transmission selector lever

in this position.

Do not permanently hold the + or -

buttons in. This may damage the

transmission and may lead to an

accident or injury.

Press the + button to shift up and the -

button to shift down.

D (Drive)

With the transmission selector lever in D,

your vehicle will shift automatically

through the forward gears. You cannot

start the engine with the transmission

selector lever in this position.

Gears may be skipped by pressing the + or

- buttons repeatedly at short intervals.

We recommend you upshift according to

the following guide to achieve the best fuel

economy for your vehicle.

The transmission will select the

appropriate gear for optimum vehicle

performance and economy based on

ambient temperature, road gradient,

vehicle load, speed and your driving style.

Shift From

Recommended

Speed

1 - 2

2 - 3

3 - 4

4 - 5

5 - 6

15 mph (24 km/h)

25 mph (40 km/h)

40 mph (64 km/h)

45 mph (72 km/h)

50 mph (80 km/h)

When you use Drive mode it provides a

downshift function. See Downshift in this

section.

Note: A shift will occur only when your

vehicle and engine speeds are appropriate.

Sport Mode and Manual Shifting

Sport Mode

Manual mode also provides a downshift

function. See Downshift in this section.

With the transmission selector lever in S,

gears are selected quicker and at higher

engine speeds. You cannot start the engine

with the transmission selector lever in this

position.

Note: The transmission will automatically

upshift if the engine speed is too high or

downshift if the engine speed is too low.

126

Fiesta (CCT), enUSA, Second Printing

Transmission

Downshift

HintsonDrivingwithanAutomatic

Transmission

Press the accelerator pedal fully with the

transmission selector lever in either D, S

mode or manual shifting position to select

a lower gear for optimum performance.

Release the accelerator pedal when you

no longer require downshift.

WARNINGS

Do not apply the brake and

accelerator pedals simultaneously

for more than three seconds as this

limits engine rpm and labors the

transmission. This may make it difficult to

maintain speeds in traffic and lead to an

accident or injury.

If Your Vehicle Gets Stuck In Mud or

Snow

If your vehicle gets stuck in mud or snow,

it may be rocked out by shifting between

D and R, stopping between shifts in a

steady pattern. Press the accelerator

lightly in each gear.

Do not idle the engine for long

periods of time in D with the brakes

applied. This could damage the

transmission and may lead to an accident

or injury.

Note: Do not rock your vehicle if the engine

is not at normal operating temperature as

this can damage the transmission.

Note: The system carries out a series of

checks when you switch the ignition on and

off. You may hear clicking sounds. This is

normal.

Note: Do not rock your vehicle for more

than a minute as this can damage the

transmission or the tires and the engine may

overheat.

Moving off

1. Press the brake pedal to apply the

brakes.

Emergency Park Position Release

Lever

2. Move the transmission selector lever

WARNINGS

to R, D or S.

Do not drive your vehicle until you

verify that the brake lamps are

working. Failure to adhere to warning

indicators may lead to an accident or injury.

3. Release the parking brake.

4. Release the brake pedal and press the

accelerator pedal.

Stopping

If you release the parking brake and

the brake warning lamp remains

illuminated the brakes may not be

working correctly. Have your vehicle

checked by an authorized dealer as soon

as possible. Failure to adhere to warning

lamps and indicators may lead to an

accident or injury.

1. Release the accelerator pedal and

press the brake pedal.

2. Apply the parking brake.

3. Move the transmission selector lever

to N or P.

Use the emergency P position release lever

to move the transmission selector lever

from the P position in the event of a

malfunction or if your vehicle battery has

no charge.

127

Fiesta (CCT), enUSA, Second Printing

Transmission

HILL START ASSIST(If Equipped)

WARNINGS

The system does not replace the

parking brake. When you leave your

vehicle, always apply the parking

brake and move the transmission selector

lever into position P (Park).

You must remain in your vehicle once

you have activated the system.

3

2

E142193

During all times, you are responsible

for controlling your vehicle,

supervising the system and

intervening, if required.

1. Apply the parking brake and switch the

ignition off before carrying out this

procedure.

2. Remove the retaining screw.

If the engine is revved excessively, or

if a malfunction is detected, the

system will be deactivated.

3. Remove the center console side panel.

The system makes it easier to pull away

when your vehicle is on a slope without the

need to use the parking brake.

4

When the system is active, your vehicle will

remain stationary on the slope for two to

three seconds after you release the brake

pedal. This allows you time to move your

foot from the brake to the accelerator

pedal. The brakes are released

automatically once the engine has

developed sufficient drive to prevent your

vehicle from rolling down the slope. This

is an advantage when pulling away on a

slope, (for example from a car park ramp,

traffic lights or when reversing uphill into

a parking space).

E142214

4. Press the brake pedal. Using a suitable

tool rotate the lever forward while

pulling the transmission selector lever

out of the P position.

The system will activate automatically on

any slope which can result in significant

vehicle rollback.

Note: The emergency P position release

lever is pink.

Note: See an authorized dealer as soon as

possible if you use procedure.

Using Hill Start Assist

1. Press the brake pedal to bring your

vehicle to a complete standstill. Keep

the brake pedal pressed.

128

Fiesta (CCT), enUSA, Second Printing

Transmission

2. If the sensors detect that your vehicle

is on a slope, the system will be

activated automatically.

3. When you remove your foot from the

brake pedal, your vehicle will remain

on the slope without rolling away for

approximately two or three seconds.

This hold time will automatically be

extended if you are in the process of

driving off.

4. Drive off in the normal manner. The

brakes will be released automatically.

Switching the System On and Off

Note: The system can only be switched on

and off for manual transmissions.

Note: Once you have switched off the

system, it will remain off until you switch it

on again.

Your vehicle comes with the system

already enabled. If desired, you can disable

the feature: See (page 83).

129

Fiesta (CCT), enUSA, Second Printing

Transmission for Your Ford Fiesta 4 Door Sixth Generation (2009-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals