Transmission
2. Fully depress the clutch pedal then
MANUAL TRANSMISSION -
1.6L DURATEC-16V TI-VCT
(SIGMA)/1.0L ECOBOOST™
start the engine.
3. Press the brake pedal and shift the
gearshift lever to first or reverse gear.
4. Release the parking brake and slowly
release the clutch pedal while slowly
pressing on the accelerator.
Using the Clutch
Note: Failure to fully depress the clutch
pedal to the floor may cause increased shift
efforts, prematurely wear transmission
components or damage the transmission.
During each shift, make sure you fully
depress the clutch pedal.
Recommended Shift Speeds
Note: Do not drive with your foot resting on
the clutch pedal or use the clutch pedal to
hold your vehicle at a standstill while
waiting on a hill. These actions will reduce
the life of the clutch and could nullify a
clutch warranty claim.
Note: Do not shift the gearshift lever to first
gear when your vehicle is moving faster than
15 mph (24 km/h). This will damage the
clutch.
We recommend you change gear
according to the following guide to achieve
the best fuel economy for your vehicle.
Shift from
Recommended
speed
1 - 2
15 mph (24 km/h)
24 mph (38 km/h)
32 mph (51 km/h)
43 mph (70 km/h)
2 - 3
3 - 4
4 - 5
E157512
Manual transmission vehicles have a
starter interlock that prevents cranking the
engine unless the clutch pedal is fully
depressed.
Reverse
Note: Do not shift the gearshift lever to
reverse gear when your vehicle is moving.
This can cause damage to the transmission.
Starting Your Vehicle
WARNING
1. Fully depress the clutch pedal to
disengage clutch.
Make sure the floor mat is positioned
correctly so that it does not interfere
with the full extension of the clutch
pedal.
2. Shift the gearshift lever to the neutral
position and wait at least three
seconds before moving it to reverse.
1. Make sure the parking brake is fully set
and shift the gearshift lever to the
neutral position.
122
Fiesta (CCT), enUSA, Second Printing
English 
