Transmission
HILL START ASSIST(If Equipped)
WARNINGS
The system does not replace the
parking brake. When you leave your
vehicle, always apply the parking
brake and move the transmission selector
lever into position P (Park).
You must remain in your vehicle once
you have activated the system.
3
2
E142193
During all times, you are responsible
for controlling your vehicle,
supervising the system and
intervening, if required.
1. Apply the parking brake and switch the
ignition off before carrying out this
procedure.
2. Remove the retaining screw.
If the engine is revved excessively, or
if a malfunction is detected, the
system will be deactivated.
3. Remove the center console side panel.
The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.
4
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope. This
is an advantage when pulling away on a
slope, (for example from a car park ramp,
traffic lights or when reversing uphill into
a parking space).
E142214
4. Press the brake pedal. Using a suitable
tool rotate the lever forward while
pulling the transmission selector lever
out of the P position.
The system will activate automatically on
any slope which can result in significant
vehicle rollback.
Note: The emergency P position release
lever is pink.
Note: See an authorized dealer as soon as
possible if you use procedure.
Using Hill Start Assist
1. Press the brake pedal to bring your
vehicle to a complete standstill. Keep
the brake pedal pressed.
128
Fiesta (CCT), enUSA, Second Printing
English 
