Get Driver Controls -> Speed control Guide for Ford Fusion 4 Door First Generation (2006-2012)

Driver Controls

EXTERIOR MIRRORS

Power side view mirrors

WARNING: Do not adjust the mirror while the vehicle is in

motion.

To adjust your mirrors:

1. Rotate the control clockwise to

adjust the right mirror and rotate

the control counterclockwise to

adjust the left mirror.

2. Move the control in the direction

you wish to tilt the mirror.

3. Return to the center position to lock mirrors in place.

Heated outside mirrors

(if equipped)

Both mirrors are heated automatically to remove ice, mist and fog when

the rear window defrost is activated.

Do not remove ice from the mirrors with a scraper or attempt to

readjust the mirror glass if it is frozen in place. These actions

could cause damage to the glass and mirrors.

Do not clean the housing or glass of any mirror with harsh

abrasives, fuel or other petroleum-based cleaning products.

Blind spot mirrors (if equipped)

Your vehicle may be equipped with blind spot mirrors or a blind spot

information system. Refer to Blind spot mirrors or Blind spot

information system (BLIS௡) with cross traffic alert (CTA) in the

Driving chapter.

SPEED CONTROL

With speed control set, you can maintain a set speed without keeping

your foot on the accelerator pedal.

WARNING: Do not use the speed control in heavy traffic or on

roads that are winding, slippery or unpaved.

82

2011 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

Driver Controls

Using speed controls

The speed controls are located on the steering wheel. The following

buttons work with speed control:

– SET +: Press to set a speed or to

increase or decrease the set speed.

CNCL (Cancel)/RSM (Resume):

Press to return cancel or resume a

set speed.

ON/OFF: Press to turn speed

control on or off.

The speed control system uses

two

indicator lights in the

instrument cluster:

• an amber indicator light which illuminates when the system is on, and

• a green indicator light which illuminates when the system is engaged.

Setting speed control

To set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET +.

4. Take your foot off the accelerator pedal.

5. The green indicator

light on the instrument cluster will turn on.

Note:

• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

83

2011 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

Driver Controls

Disengaging speed control

To disengage speed control, tap the brake pedal or clutch pedal (if

equipped) or press CNCL.

Disengaging the speed control will not erase the previous set speed.

Note: When you use the clutch pedal to disengage the speed control,

the engine speed may briefly increase, this is normal.

Resuming a set speed

Press and release RSM. This will automatically return the vehicle to the

previously set speed.

Increasing speed while using speed control

To increase the set speed:

• Press and hold SET + until you get to the desired speed, then release.

You can also use SET + to operate the tap-up function. Press and

release SET + to increase the vehicle set speed in 1 mph (1.6 km/h)

increments.

• Use the accelerator pedal to get to the desired speed then press and

release SET +.

Reducing speed while using speed control

To reduce the set speed:

• Press and hold – SET until you get to the desired speed, then release.

You can also use – SET to operate the tap-down function. Press and

release – SET to decrease the vehicle set speed in 1 mph (1.6 km/h)

increments.

• Press the brake pedal or the clutch pedal (if equipped) until the

desired vehicle speed is reached then press SET +.

Turning off speed control

To turn off the speed control, press OFF or turn off the ignition.

Note: When you turn off the speed control or the ignition, your speed

control set speed memory is erased.

84

2011 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

Driver Controls

STEERING WHEEL CONTROLS (IF EQUIPPED)

Radio control features

VOL + (Volume): Press to increase

the volume.

VOL – (Volume): Press to decrease

the volume.

(Seek): Press to select

the previous/next radio station

preset, CD track or satellite radio

channel (if equipped) depending on

which media mode you are in.

MEDIA: Press repeatedly to scroll

through available audio modes.

Navigation system hands free

control features (if equipped)

Press and hold

until the voice

control briefly

icon appears on

the navigation display to use the

voice command feature.

Press

to complete a voice

command.

For further information on the

navigation system, refer to the Navigation System supplement.

SYNC௡ system hands free

control feature (if equipped)

Press

briefly to use the voice

command feature. You will hear a

tone and LISTENING will appear in

the radio display. Press and

hold

to exit voice command.

Press

to activate phone mode or

answer a phone call. Press and

hold

mode.

to end a call or exit phone

Press

to scroll through various menus and selections. Press

OK to confirm your selection.

85

2011 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

Driver Controls -> Speed control for Your Ford Fusion 4 Door First Generation (2006-2012)

Related Topics

Driver Controls

Popular Owner Manuals

Latest Owner Manuals