105-132 Ford KA EN 14-10-2010 11:37 Pagina 122
1
KA00087m
KA00153m
KA00089m
fig. 15
fig. 16a
fig. 17
DIRECTION INDICATORS
MAIN BEAM/DIPPED
HEADLIGHTS
Front
To change the bulb, proceed as follows:
❒
remove the protecting rubber cap
mentioned above;
press on the central electrical
connector A-fig. 17 and withdraw
the unit;
To change the bulb, proceed as follows:
❒
turn the bulb holder clockwise
A-fig. 15 and withdraw it;
❒
❒
remove the bulb B pushing it gently
and turning counterclockwise
(bayonet fitting), then replace it;
❒
❒
remove the bulb B and replace it;
fit the new bulb, aligning the outlines
of the metallic part with the grooves
on the reflector;
KA00154m
fig. 16b
❒
refit the bulb holder A by turning it
clockwise and locking it properly;
To change the bulb, proceed as follows:
❒
❒
❒
❒
lever the lens off, by initially applying
force from the front towards the
back (1-fig. 16a);
❒
❒
refit the bulb holder catches and
reconnect the electrical connector;
refit the cap A, ensuring that it locks
into place.
Side
WARNING The intervention must
be carried out taking all precautions
necessary to avoid damaging the
bodywork (please use a sufficiently rigid
and appropriately thick plastic card).
then lever in the opposite direction,
by applying force from the back part
(2-fig. 16b) and remove unit B
turn the bulb holder
counterclockwise, remove the snap-
fitted bulb and replace it;
reinstall the bulb holder into the lens,
then install the unit B making sure
that the fixing clip has clicked.
122