KNOWING YOUR CAR -> AUTOMATIC CLIMATE CONTROL SYSTEM (where provided) for Your Ford Ka 2 Door Second Generation (2009-2016)

026-046 Ford KA EN:026-046 Ford KA IT 14-10-2010 11:23 Pagina 34  
AUTOMATIC CLIMATE  
CONTROL SYSTEM  
(where provided)  
The automatic climate control system  
automatically regulates the following  
depending on the temperature set  
by the user:  
the temperature of the air conveyed  
to the passenger compartment;  
fan speed (continuous air flow  
variation);  
air distribution inside the passenger  
compartment;  
compressor activation/deactivation  
(to cool/dehumidify air);  
air recirculation on/off.  
KA00191m  
fig. 31  
All the above functions can be changed  
manually by selecting the required  
function(s). Manual setting of a function  
does not impair the automatic control  
of the other functions even if the  
AUTO button LED is off.  
CONTROLS fig. 31  
A/C button – B  
compressor activation/  
deactivation  
Button AUTO – A  
Activation of the automatic  
function of the climate control  
system  
Pressing the button, with LED on,  
the compressor and the LED switch off.  
When the compressor is off:  
Pressing the AUTO button and setting  
the required temperature, the system  
adjusts air temperature, quantity  
and distribution into the passenger  
compartment and controls  
the system deactivates air recirculation  
to avoid window misting;  
the compressor operation.  
34  
026-046 Ford KA EN:026-046 Ford KA IT 14-10-2010 11:23 Pagina 35  
it is not possible to supply into the  
passenger compartment air with  
a temperature lower than external  
air temperature (the temperature  
indicated on the display blinks when  
the system does not ensure  
Button  
– D  
IMPORTANT Specifically, if the heating  
fluid is not sufficiently warm, the fan will  
not start up at the maximum speed  
immediately to limit introducing  
excessively cool air into the passenger  
compartment.  
Air recirculation on/off button  
It is advisable to activate internal air  
recirculation in queues or in tunnels to  
prevent the introduction of polluted air.  
the achievement of the required  
comfort conditions);  
LED on button ON = recirculation ON.  
LED on button OFF = recirculation OFF.  
Buttons +, −, F  
Adjusting fan speed  
it is possible to manually reset the  
fan speed (with compressor enabled,  
ventilation cannot go below one  
bar shown on the display).  
Pressing the buttons + or −  
respectively, the fan speed displayed on  
the display bars increases or decreases.  
At low temperatures or if  
the compressor is off, the recirculation  
is forced to off to avoid misting.  
The fan can be cut off only if the  
compressor has been switched off  
(B button).  
IMPORTANT It is inadvisable to use air  
recirculation on cold days as it would  
considerably increase the possibility  
of windows misting up inside.  
Button OFF – C  
System switching off  
To restore automatic fan speed control,  
press the AUTO button.  
Pressing the OFF button the system  
is switched off.  
Buttons +, −, E  
Setting desired temperature  
With the system off, the climate control  
system conditions are as follows:  
Buttons y μ ∂ – G H I  
Air distribution manual selection  
Pressing the button + the temperature  
in the passenger compartment rises  
until the value HI is reached (maximum  
heating).  
all LEDs off;  
By pressing the buttons, one of the five  
possible air flow distribution patterns  
can be selected:  
set temperature display off;  
air recirculation off;  
compressor off;  
fan off.  
y
to the windscreen and front side  
window vents to demist or defrost  
them.  
Pressing the button- the temperature in  
the passenger compartment decreases  
until the value LO is reached (maximum  
cooling).  
μ
air flow to the central and side  
dashboard vents to ventilate the  
chest and the face during the hot  
season.  
In this condition, it is possible to enable  
or disable air recirculation without  
system activation.  
35  
026-046 Ford KA EN:026-046 Ford KA IT 14-10-2010 11:23 Pagina 36  
to the front seat footwell vents.  
Due to the natural tendency  
of heat to spread upwards,  
this type of distribution warms  
the passenger compartment up  
as quickly as possible, providing  
an immediate feeling of warmth.  
distribution between feet area  
vents (warmer air) and dashboard  
vents (cooler air).  
distribution between feet area  
vents and windscreen/side  
front window vents. This type  
of distribution achieves effective  
heating of the passenger  
air recirculation switching-off;  
maximum air temperature setting (HI);  
fan speed enabling depending on  
the coolant temperature;  
air flow conveying to the windscreen  
and front side windows;  
DEMISTING/DEFROSTING  
HEATED WINDSCREEN  
Press button N to activate this function.  
Activation is indicated by lighting of  
warning light A on the instrument  
panel.  
This function is timed and it will turn off  
automatically after 4 minutes. Press  
button N again to disable the function  
in advance.  
heated rear window on.  
heated windscreen on (if present).  
+  
μ
IMPORTANT The function stays on for  
approximately 3 minutes once the  
coolant is sufficiently warm  
+  
y
SYSTEM SERVICING  
DEMISTING/DEFROSTING  
HEATED REAR WINDOW  
In winter, the climate control system  
must be turned on at least once  
a month for about 10 minutes.  
Have the system inspected at a Ford  
Dealership before the summer.  
Press button M to activate this function.  
compartment and prevents  
the windows from misting up.  
Activation is indicated by lighting of  
warning light  
on the instrument panel.  
(
The set air distribution is shown by the  
LEDs on the selected buttons.  
To restore the automatic air  
distribution control, press the AUTO  
button.  
This function is timed and it will turn off  
automatically after 20 minutes. Press  
button M again to disable the function  
in advance.  
The system uses R134a  
coolant fluid which does  
not pollute the environment  
in the event of accidental  
leakage. Never use R12 fluid which  
is not compatible with the system  
components.  
IMPORTANT Do not affix decals on  
the inside of the rear window over the  
heating filaments to avoid damage that  
might cause it to stop working properly.  
Button  
Front window fast  
demisting/defrosting button  
– L  
-
When the button  
-
is pressed the  
system activates all the functions  
required for fast demisting/defrosting:  
compressor switching-on (if the  
weather conditions are suitable);  
36