Get KNOWING YOUR CAR -> MULTIFUNCTION DISPLAY (where provided) Guide for Ford Ka 2 Door Second Generation (2009-2016)

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 16

Setting the distance unit (Unit)

Front passenger’s airbag and side

bag activation/deactivation

(where provided) (P BAG) (*)

MULTIFUNCTION

DISPLAY (where

provided)

With this function it is possible to set

the unit.

This function is used to activate/

deactivate the front passenger’s airbag.

To perform the adjustment proceed

as follows:

The car can be equipped with

the multifunction display that,

depending on previous settings,

shows useful information when driving.

Proceed as follows:

– briefly press button MENU ESC

,

the display will show the wording (Unit)

and the previously set unit (km) or (mi);

❒

press button MENU ESC and, after

displaying the message (P BAG OFF)

(to deactivate) or the message

– press + or − to select the required

distance unit.

“STANDARD” SCREEN fig. 14

The standard screen shows the

following information:

(P BAG On) (to activate) by pressing

buttons + or −, re-press MENU ESC

;

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to

the standard screen without storing

settings.

❒

the confirmation request message

will be displayed;

a

Outside temperature

B Time (always displayed, even

with key extracted and front

doors closed)

C Auto-Start-Stop function indication

D Gear Shift Indication

E Odometer (covered km or miles).

F Date

press + or − to select YES

(confirming activation/deactivation)

or no (to abort);

❒

briefly press MENU ESC to confirm

setting and go back to the menu

screen or hold the button down

to go back to the standard screen

without saving.

G Headlight aiming position (only with

dipped beam headlights on)

(*) Function activated only by taking

car to dealership.

Note. When opening one of the front

doors, the display turns on and shows

the time and the kilometres or miles

covered for a few seconds.

16

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 17

Controlling the car interior lights

E

– on the standard screen, they control

brightness of instrument panel, radio

and automatic climate control system.

Setup menu

– within the menu, to scroll the menu

options upwards and downwards;

– to increase or decrease values during

settings.

D

KA00166m

KA00016m

fig. 14

fig. 15

SETUP MENU

The menu comprises a series

GEAR SHIFT INDICATION

CONTROL BUTTONS fig. 15

+ To scroll the displayed menu

and the related options upwards

or to increase the value displayed.

of functions arranged in a cycle which

can be selected through buttons + and

− to access the different select

operations and settings (setup) given

in the following paragraphs. A submenu

is provided for some items (Setting the

clock and Set units).

MENU Press briefly to display

On vehicles with a manual gearbox,

the gear shift indicator suggests gear

changes to the driver (SHIFT UP or

SHIFT DOWN) via a special display

on the control panel. This suggestion

to change gear is designed to improve

consumption and ensure the best

driving style.

the menu and/or go to

next screen or confirm

the required menu option.

ESC

The setup menu can be activated

by pressing briefly button MENU ESC

Single presses on buttons + or −

will scroll the setup menu options.

Hold pressed to go back

to the standard screen.

.

− To scroll the displayed menu and

the related options downwards or

to decrease the value displayed.

NB The indication on the instrument

panel remains on until the driver

changes gear or until the driving

conditions return to a situation where

a gear change is not required to reduce

consumption.

Note Buttons + and − activate

different functions according to

the following situations:

17

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 18

Operating modes are different

according to the characteristics

of the option selected.

The menu includes the following

functions:

Selecting an option from the main menu

– to return to the main menu if you

are at another point of the menu

(e.g.: at submenu option setting level,

at submenu level or at main menu

option setting level);

– to save only the settings already stored

(and confirmed by pressing the MENU

ESC button).

The setup menu page is timed. Only

the changes saved by the user by briefly

pressing MENU ESC are saved when

the menu are automatically closed.

with a submenu:

– briefly press button MENU ESC

to display the first submenu option;

– press + or − (with single presses)

to scroll all the submenu options.

– press briefly button MENU ESC

to select the displayed submenu option

and to open the relevant setup menu;

– press + or − (with single presses)

to select the new setting for this

submenu option.

– briefly press button MENU ESC

to store the new setting and to

go back to the previously selected

submenu option.

– MENÙ

– SPEED BEEP

– TRIP B DATA

– SET TIME

– SET DATE

– SEE RADIO

– MEASUREMENT UNIT

– LANGUAGE

– WARNING VOLUME

- KEY VOL.

– PASSENGER AIRBAG (*)

- COURTESY LIGHTS

– EXIT MENU

Selecting “Set Date” and “Set time”:

(*) Function activated only by taking

car to dealership.

– briefly press button MENU ESC

to select the first value to change

(e.g. hours/minutes or year/month/day).

Selecting an option from the main menu

without a submenu:

– press buttons + or − (with a single

press) to select the new setting;

– press briefly button MENU ESC

– briefly press button MENU ESC

to store the new setting and go to

the next setup menu option:

if this is the last one you will go back

to the previously selected option

of the main menu.

to select the main menu option to set;

– press buttons + or − (with a single

press) to select the new setting;

– press briefly button MENU ESC

to store the new setting and go back

to the main menu option previously

selected.

Press the button MENU ESC for long:

– to quit the set up menu if you are in the

main menu;

18

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 19

Speed Beep (Speed limit)

Setting the time (Clock)

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to the

standard screen without storing settings.

This function enables the clock to

be set through two submenus: “Time”

and “Format”.

To carry out the adjustment, proceed

as follows:

– briefly press button MENU ESC

the display will show the two sub-

menus “Time” and “Mode”;

– press the button + or − to switch

between the two submenus;

– select the required option and then

briefly press button MENU ESC

– if selecting “Time”, briefly press button

MENU ESC, “hours” will flash on the

display;

– press the button + or − for setting;

– briefly press button MENU ESC

“minutes” will flash on the display;

This function is used to set the car

speed limit (km/h or mph); the driver

is immediately alerted when this limit

is exceeded (see chapter “Warning

lights and messages”).

To cancel the setting, proceed as follows:

– briefly press button MENU ESC

:

,

(On) will flash on the display;

To set the desired speed limit, proceed

as follows:

– press the button −, “Off” flashes

on the display;

– briefly press button MENU ESC

the display will show the message

(Speed Buzz);

,

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to

the standard screen without storing

settings.

– press button + or − to select speed

limit activation (On) or deactivation

(Off);

;

– if the function has been activated (On),

press buttons + or − to select

the required speed limit and then

press MENU ESC to confirm.

Trip B data (Trip B enablement)

This function can be used to activate

(On) or deactivate (Off) the Trip

B display (partial trip).

,

Note. The speed may be set in the range

from 30 to 200 km/h, or from 20 to

125 mph according to the previously

chosen unit (see “Setting the distance

unit” paragraph ) described below.

– press the button + or − for setting;

For further information see “Trip

computer”.

Proceed as follows to switch

the function on and off:

The setting will increase/decrease by five

– briefly press button MENU ESC

(On) or (Off) will flash on the display

(according to previous setting);

:

units each time the button +/ is pressed.

−

Hold the button +/ pressed to increase/

−

decrease the setting rapidly

– press the button + or − to select;

and automatically. Complete the setting

by single pressing the button when

you approach the required value.

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to

the standard screen without storing

settings.

19

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 20

– when accessing the “Format” submenu:

briefly pressing button MENU ESC

makes the display mode flash;

– press the button + or − to select

“24h” or “12h”.

When you have made the required

settings, briefly press button MENU

ESC to go back to the menu screen

or press the button for long to go back

to the standard screen without storing

settings.

– hold MENU ESC down to go back

to the standard screen or main menu,

depending on where you are in the menu.

See radio (Repeat audio

information)

Set date (Setting the date)

Using this function you can update

the date (day – month – year).

With this function the display shows

information about the sound system.

Proceed as follows to update:

– Radio: selected radio station

frequency or RDS message, automatic

tuning activation or AutoSTore;

– briefly press button MENU ESC

“day” (dd) will flash on the display;

:

– press the button + or − for setting;

– Audio CD, MP3 CDs: track number;

– briefly press button MENU ESC

“month” (mm) will flash on the display;

:

– CD Changer: CD number and track

number;

– press the button + or − for setting;

To show the sound system information

on the display (On) or clear it (Off),

proceed as follows:

– briefly press button MENU ESC

“year” (yyyy) will flash on the display;

:

– press the button + or − for setting.

– briefly press button MENU ESC (On)

or (Off) will flash on the display

(according to previous setting);

NB The setting increases or decreases

by one unit each time + or − is pressed.

Hold down the button to increase/

decrease the setting rapidly and

automatically. Complete the setting

by briefly pressing the button when

you approach the required value.

– press the button + or − to select;

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to the

standard screen without storing

settings.

– briefly press button MENU ESC

to go back to the menu screen or

press the button for long to go back

to the standard screen without storing

settings.

20

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 21

If the set distance unit is “km”, the fuel

consumption unit will be displayed in

km/l or l/100 km.

Unit of measurement

(Set unit of measurement)

Language (Language selection)

After setting, display messages can

be shown in different languages: Italian,

German, English, Spanish, French,

Portuguese, Polish and Dutch.

With this function it is possible to set

the units through three submenus:

“Distances”, “Consumption”

and “Temperature”.

If the distance unit set is “mi” the fuel

consumption unit will be displayed in

“mpg”.

To set the desired language, proceed

as follows:

– press the button + or − to select;

To set the desired measurement unit,

proceed as follows:

– if selecting

– briefly press button MENU ESC: the

previously set “language” will flash on

the display;

“Temperature”: briefly press

MENU ESC and the display will show

“°C” or “°F” (depending on the previous

setting);

– briefly press button MENU ESC

to display the three sub-menus;

– press the button + or − to select;

– press the button + or − to switch

between the three submenus;

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to

the standard screen without storing

settings.

– press the button + or − to select;

– select the required sub-menu and then

briefly press button MENU ESC

When you have made the required

adjustments, briefly press MENU ESC

to go back to the menu screen or hold

the button down to go back to the main

menu without saving.

– hold MENU ESC pressed to go back

to the standard screen or main menu

according to the position in the menu.

;

– if selecting “Distance”: briefly press

MENU ESC and the display will show

“km” or “mi” (depending on the previous

setting);

– press the button + or − to select;

– if selecting “Consumption”(where

provided): briefly press MENU ESC

and the display will show “km/l”,

“l/100 km” or “mpg” (depending on

the previous setting);

21

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 22

Adjusting the button volume

(Button Vol.)

Passenger front and side airbag

activation/deactivation and side

bag protection (chest/pelvis)

(where present)

Warning volume

(Adjusting the failure/

warning buzzer volume)

This function may be used to adjust

the volume of the beep accompanying

the activation of buttons MENU ESC

+ and − can be adjusted according to

8 levels.

With this function the volume of

the buzzer which accompanies

the display of any failure/warning can

be adjusted according to 8 levels.

,

This function is used to activate/

deactivate the front passenger’s airbag.

Proceed as follows:

To set the desired volume, proceed

as follows:

To set the desired volume, proceed

as follows:

- press button MENU ESC and press

MENU ESC again after the message

(Bag pass: Off) (to deactivate) or

(Bag pass: On) (to activate) is displayed

by pressing buttons + and −;

– briefly press button : MENU ESC

the previously set volume “level” will

flash on the display;

;

– briefly press button : MENU ESC

the previously set volume “level” will

flash on the display;

;

– press the button + or − for setting;

– the confirmation request message

is displayed;

– briefly press button MENU ESC

to go back to the menu screen or press

the button for long to go back to

the standard screen without storing

settings.

– briefly press button MENU ESC

to go back to the menu screen or

press the button for long to go back

to the standard screen without storing

settings.

– press buttons + or −

to select (Yes) (confirming activation/

deactivation) or (No) (to abort);

– briefly press MENU ESC to confirm

setting and go back to the menu screen

or press the button for long to go back

to the standard screen without storing

settings.

22

001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 23

Courtesy lights (Greeting lights)

For activation/deactivation, proceed

as follows:

Exit Menu

This functions allows the side lights

and number plate lights to be turned

on for 25 seconds when the doors or

boot are opened using the remote

control, with the following exceptions:

This is the last function that closes

the cycle of settings listed in the menu

screen.

– briefly press button MENU ESC

:

(On) or (Off) will flash on the display

(according to previous setting);

Briefly press button MENU ESC to

go back to the standard screen without

storing settings.

– press the button + or − to select;

– interruption 5 seconds following door

closure

– briefly press button MENU ESC

to go back to the menu screen

or press the button for long to go back

to the standard screen without storing

settings.

Press button − to return to the first

menu option (Speed Beep).

– Interruption after a lock command

from the remote control

– Interruption after a lock or activation

command from the remote control

23

KNOWING YOUR CAR -> MULTIFUNCTION DISPLAY (where provided) for Your Ford Ka 2 Door Second Generation (2009-2016)

Related Topics

KNOWING YOUR CAR

Popular Owner Manuals

Latest Owner Manuals