026-046 Ford KA EN:026-046 Ford KA IT 14-10-2010 11:23 Pagina 27
Driver side, where equipped
with position memory
HEAD RESTRAINTS
To return the seat to its initial position,
slide the seat back and press on the
backrest to lock the seat (movement
FRONT fig. 22
Head restraints are height adjustable;
operate as follows.
A
B
d) operate lever D (movement e)
and raise the backrest (movement f)
until it clicks home.
❒
Upwards adjustment: lift the head
restraint until it locks.
ATTENTION Using lever D before
KA00019m
❒
Downward adjustment: press
the button A and lower
the head restraint.
fig. 21
locking the seat in its original position
causes the original seat position to be
The type of reattachment manoeuvre
has been chosen to guarantee the safety
of the occupant. If the mechanism
detects an obstacle (e.g. a handbag)
and cannot restore the seat to its
original position, it allows the
reattachment of the seat, positioning
the backrest only, ensuring that the
guides are attached.
lost. In this case, adjust the seat position
by means of the reach adjustment fig. 17.
WARNING
All adjustments must be
carried out only with the
Driver side and passenger side
where not equipped with position
memory
vehicle stationary and engine off.
To return the seat to its initial position,
slide the seat back and press on the
backrest (movement d) operate lever
D (movement e) and raise the
backrest (movement f) until it clicks
home. Adjust reach using lever A-fig. 17.
Head restraints must be adjusted
so that the head, rather than the
neck, rests on them. Only in this
case can they protect your head
correctly.
To make the best use of the head
restraint’s protective action, adjust
the backrest so that your torso
is upright and keep your head
as close as possible to the head
restraint.
REAR SEATS fig. 21
Backrest release
❒
For versions with joint seat, lift handles
A and B and guide the backrest onto
the cushion.
WARNING
❒
For versions with separate seats, lift
handle A or B to release respectively
the left or right part of the backrest
and guide the backrest onto the cushion.
All adjustments must
be made with the car
stationary.
27