2014-2022 Ford Mondeo 4 Door Climate Control -> Automatic Climate Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Climate Control -> Automatic Climate Control for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Climate Control  
Reducing interior air humidity  
AUTOMATIC CLIMATE CONTROL  
Note: Avoid adjusting the settings when  
the vehicle interior is extremely hot or cold.  
The automatic climate control adjusts to  
the current circumstances automatically.  
For the system to function properly, the side  
and center vents should be fully open.  
Note: The sunload sensor is located on top  
of the instrument panel. Do not cover the  
sensor with any objects.  
Note: At low outside temperatures, when  
the system is in auto mode, the air stream  
will be directed to the windshield and the  
side windows as long as the engine is cold.  
Note: For information on the automatic  
climate control, on vehicles fitted with a  
combined Navigation and automatic  
climate control system, see separate  
handbook.  
The system controls the temperature,  
amount and distribution of the air flow  
automatically and adjusts them according  
to the driving and weather conditions.  
Pressing the AUTO button once switches  
on the auto mode.  
The system in your vehicle is dual-zone  
automatic climate control. When the  
system is in mono mode, all the  
temperature zones are linked to the driver's  
zone. When you switch mono mode off,  
the dual-zone system allows you to set  
different temperatures for the driver's and  
front passenger's side.  
101  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Climate Control  
Note: If you set one of the sides to HI or LO,  
Setting the temperature  
both sides will be set to HI or LO.  
To switch mono mode back on  
To switch mono mode back on,  
press the MONO button.  
MONO reappears in the display  
and the passengers side temperature will  
be adjusted to the drivers side  
temperature.  
You can set the temperature between  
15.5ºC (60°F) and 29.5ºC (85°F) in steps  
of 0.5ºC (1°F). In position LO, 15ºC (59°F),  
the system will switch to permanent  
cooling. In position HI, 30°C (86°F), the  
system will switch to permanent heating.  
Note: If either position LO or HI is selected,  
the system will not regulate a stable  
temperature.  
Blower  
Use the buttons to adjust the  
blower speed.  
The blower setting is indicated in the  
display.  
Mono mode  
To return to auto mode, press the AUTO  
In mono mode, the temperature settings  
for both the drivers and passengers side  
are linked. If you adjust the temperature  
using the rotary control on the drivers side,  
the settings will be adjusted to the same  
setting on the passengers side. In mono  
mode, MONO appears in the display.  
button.  
Air distribution  
To adjust air distribution, press the desired  
button. Any combination of settings can  
be selected simultaneously.  
To switch mono mode off  
Select a temperature for the passengers  
side with the rotary control on the  
passengers side. Mono mode will switch  
off and MONO disappears from the  
display. The temperature for the drivers  
side will remain unchanged. You can now  
adjust the driver and passenger side  
temperatures independently of each  
another. The temperature settings for each  
side are shown in the display. You can set  
a temperature difference of up to 4ºC  
(8°F).  
A
B
C
Footwell  
Face level  
Windshield  
When you select windshield defrosting and  
demisting, A, B and C switch off  
Note: If you set a temperature difference  
of greater than 4ºC (8°F), the temperature  
on the other side will be adjusted so that  
the difference remains 4ºC (8°F).  
automatically and the air conditioning  
switches on. Outside air will flow into the  
vehicle. You cannot select recirculated air.  
102  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  

Related Topics

Popular Owner Manuals