2014-2022 Ford Mondeo 4 Door Starting and Stopping the Engine -> Keyless Starting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and Stopping the Engine -> Keyless Starting for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Starting and Stopping the Engine  
II The ignition is switched on. All electrical  
GENERAL INFORMATION  
General points on starting  
If the battery has been disconnected the  
vehicle may exhibit some unusual driving  
characteristics for approx. 8 kilometers (5  
miles) after reconnecting the battery.  
circuits are operational. Warning lamps  
and indicators illuminate. This is the key  
position when driving. You must also select  
it when being towed.  
III The starter motor is activated. Release  
the key as soon as the engine starts.  
This is because the engine management  
system must realign itself with the engine.  
Any unusual driving characteristics during  
this period may be disregarded.  
KEYLESS STARTING  
WARNINGS  
The keyless starting system may not  
function if the key is close to metal  
objects or electronic devices such as  
cell phones.  
Starting the engine by towing or  
pushing  
WARNING  
Always check that the steering wheel  
To prevent damage you must not  
push or tow start your vehicle. Use  
booster cables and a booster battery.  
See Jump Starting the Vehicle (page  
248).  
lock is deactivated before  
attempting to move your vehicle.  
See Steering Wheel Lock (page 120).  
Note: The ignition may automatically  
switch off after a period of time if your  
vehicle has been left unattended with the  
ignition on. This is to prevent the vehicle  
battery from discharging.  
Note: A valid passive key must be located  
inside the vehicle to switch the ignition on  
and start the engine.  
IGNITION SWITCH  
WARNING  
Never return the key to position 0 or  
I when the vehicle is in motion.  
Note: To start your engine you must also  
fully depress the brake or clutch pedal,  
depending on the transmission fitted.  
0 The ignition is off.  
I The ignition and all main electrical circuits  
are disabled.  
Note: Do not leave the ignition key in this  
position for too long to avoid discharging  
the battery.  
118  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  
Starting and Stopping the Engine  
Type 1  
Ignition on  
Press the button once. All electrical circuits  
are operational, warning lamps and  
indicators illuminate.  
Startingwithmanualtransmission  
Note: Releasing the clutch pedal during  
engine start will stop the engine cranking  
and return to ignition on.  
1. Fully depress the clutch pedal.  
2. Briefly press the button.  
3. If the engine does not start, fully  
depress the brake and clutch pedals.  
Starting with automatic  
transmission  
Note: Releasing the brake pedal during  
engine start will stop the engine cranking  
and return to ignition on.  
1. Hold the key next to the steering  
column shroud exactly as shown.  
2. With the key in this position you can  
use the button to switch the ignition on  
and start your vehicle.  
1. Move the transmission selector lever  
to position P or N.  
Type 2  
2. Fully depress the brake pedal.  
3. Briefly press the button.  
Starting a diesel engine  
Note: Engine cranking may not commence  
until the engine glow plug cycle has been  
completed. This may take several seconds  
in extremely cold conditions.  
Note: Continue to press the clutch or brake  
pedal until engine cranking begins.  
Failure to start  
The passive starting system will not  
function if:  
1. Carefully prise out the cover.  
The passive key frequencies are  
jammed.  
The passive key battery is flat.  
If you are unable to start your vehicle carry  
out the following procedure.  
119  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  

Related Topics

Popular Owner Manuals