Get Telephone Guide for Ford Mondeo 4 Door Fifth Generation (2014-2022)

Telephone

For example:

GENERAL INFORMATION

M

O

H

F

Mobile

Office

Home

Fax

CAUTION

Using the system with the engine off

will drain the battery.

This section describes the functions and

features of the Bluetooth cell phone hands

free system.

The Bluetooth cell phone part of the

system provides interaction with the audio

or navigation system and your cell phone.

It allows you to use the audio or navigation

system to make and receive calls without

having to hold your cell phone.

Note: Entries may be displayed without a

category attachment.

The category can also be indicated as an

icon:

Phone

Mobile

Home

Office

Fax

Compatibility of phones

CAUTION

As no common agreement exists, cell

phone manufacturers are able to

implement a variety of profiles in their

Bluetooth devices. Because of this, an

incompatibility can occur between the

phone and hands-free system, which in

some cases may significantly degrade the

system performance. To avoid this

situation, only recommended phones

should be used.

Making a phone an active phone

Please visit the website www.ford-

mobile-connectivity.com for full details.

When using the system for the first time,

no phone is connected to the system.

TELEPHONE SETUP

Phonebook

After start up access to the phonebook list

can be delayed for several minutes,

depending upon the size.

Bluetooth phone

After bonding a Bluetooth phone to the

system, this becomes the active phone.

For further information refer to the phone

menu.

Select the phone from the active phone

menu.

Phonebook categories

Depending on your phonebook entry,

different categories can be displayed in

the audio unit.

Turning the ignition and radio or navigation

unit back on again, the last active phone

is picked up by the system.

274

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Note: In some cases the Bluetooth

1. The Bluetooth feature must be

activated on the phone and on the

audio unit. Make sure the Bluetooth

menu option in the audio unit is set to

ON. For information on phone settings,

refer to your phone user guide.

connection must also be confirmed on the

phone.

Bond another Bluetooth phone

Bond a new Bluetooth phone as described

in the requirements for a Bluetooth

connection.

2. In the Bluetooth menu on your phone,

search for Ford Audio and select it.

3. Enter the code number shown on the

vehicle display using the phone keypad.

If no code number is shown on the

display, enter the Bluetooth PIN

Phones stored in the system are accessible

by using the phone list on the audio unit.

Note: A maximum of six devices may be

bonded. If six Bluetooth devices have

already been bonded, one of these has to

be debonded in order to bond a new device.

number 0000 using the phone keypad.

Now enter the Bluetooth PIN number

shown on the vehicle display.

4. If your cell phone asks you to authorize

the automatic connection, select YES.

BLUETOOTH SETUP

Before you can use your telephone with

your vehicle it must be bonded to the

vehicle telephone system.

Note: A phone call will be disconnected if

the audio unit is switched off. If the ignition

key is turned to the off position the phone

call will remain in progress.

Handling of phones

TELEPHONE CONTROLS

Remote control

Voice, accept and reject button

Up to six Bluetooth devices can be bonded

to the vehicle system.

Note: If there is an ongoing call when the

phone in use is selected as the new active

phone, the call is transferred to the vehicle

audio system.

Note: Even if connected to the car system,

your phone can still be used in the usual

way.

Requirements for Bluetooth

connection

The following are required before a

Bluetooth phone connection can be made.

1

Voice button

2

Accept and reject button

The VOICE button is used to activate or

switch off the voice control.

275

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

On vehicles with an accept and reject

Note: Press and hold the seek button to

button, phone calls can be accepted and

rejected by pressing the appropriate

button.

skip to the next letter in the alphabet.

5. Press the PHONE or the call accept

button to dial the selected phone

number.

Note: Some audio units have the accept

and reject buttons on the front bezel. These

operate in the same way.

Dialing a number using the address

book - Sony radio

You can access your phone address book

via Bluetooth. The entries will appear in

the unit display.

USING THE TELEPHONE -

VEHICLES WITHOUT:

NAVIGATION SYSTEM

1. Press the PHONE button.

2. Press the seek button until the phone

This chapter describes the phone functions

book is shown.

of the audio unit.

3. Press the up/down arrow buttons to

select the desired phone number.

Note: Refer to your audio guide for details

of the controls.

Note: Press and hold the up/down arrow

buttons to skip to the next letter in the

alphabet.

4. Press the PHONE or the call accept

button to dial the selected phone

number.

An active phone must be present.

Even if connected to the audio unit, your

phone can still be used in the usual way.

Note: You can exit the phone menu by

pressing any source button CD, AM/FM or

AUX.

Dialing a number using the telephone

Making a call

keypad

Dialing a number using voice control

Phone numbers can be dialed using voice

control. See Telephone commands

(page 291).

If you have an audio unit with a telephone

keypad (buttons 0-9, * and #):

1. Press the call accept button. Press the

PHONE button if you have a Sony

radio.

Dialing a number using the address

2. Dial the number using the telephone

book

keypad on the audio unit.

You can access your phone address book

via Bluetooth. The entries will appear in

the unit display.

3. Press the call accept button.

Note: If you enter an incorrect digit whilst

entering a phone number, press the seek left

button to erase the last digit. A long press

will erase the complete string of digits.

1. Press the PHONE or the call accept

button.

2. Press the MENU button.

Press and hold 0 to enter a + digit.

3. Keep pressing the MENU button until

Ending a call

PHONEBOOK appears.

4. Press the seek buttons to select the

desired phone number.

Calls can be ended by pressing the call

reject button.

276

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Audio units without a telephone keypad

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by pressing

either the call accept button, the PHONE

button or the MODE button on the remote

control.

can also end a call by pressing either

PHONE, CD, AM/FM or ON/OFF, or by

pressing the MODE button on the remote

control

Redialing a number

1. Press the PHONE or the call accept

Rejecting an incoming call

button.

2. Press the MENU button.

Incoming calls can be rejected by pressing

the call reject button.

3. Select the CALL OUT list or the CALL

IN list. On some audio units, select the

MISSED, INCOMING or OUTGOING

calls list.

Audio units without a telephone keypad

can also reject a call by pressing either

PHONE, CD, AM/FM or ON/OFF.

Note: If the active phone does not provide

a call out list, the last outgoing call

number/entry can be redialed.

Receiving a second incoming call

Note: The second incoming call function

must be activated in your phone.

4. Press the seek button on the audio unit.

5. Press the PHONE or the call accept

button to dial the desired phone

number.

If there is an incoming call whilst there is

an ongoing call, a beep will be heard and

you will have the option to end the active

call and to accept the incoming call.

Redialing a number - Sony radio

Accepting a second incoming call

1. Press the PHONE or the call accept

button.

Second incoming calls can be accepted

by pressing either the call accept button,

the PHONE button, or the MODE button

on the remote control.

2. Press the seek button until the desired

list is displayed.

Note: If the active phone does not provide

a call out list, the last outgoing call

number/entry can be redialed.

Rejecting a second incoming call

Second incoming calls can be rejected by

pressing the call reject button. Units

without a telephone keypad can also reject

a second incoming call by pressing the CD

button, or the AM/FM button.

3. Press the up/down buttons to select

the desired phone number.

4. Press the PHONE or the call accept

button to dial the phone number.

Redialing the last dialed number - Sony

Muting the microphone

During a call, it is possible to mute the

microphone. Whilst muted, confirmation

will appear in the display.

radio

1. Press the call accept button.

2. Press the call accept button a second

time to dial the number.

277

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Audio units with green call accept

1. Press the PHONE or call accept

button

button.

2. Press the MENU button on the audio

Press the call accept button. Press the

unit.

button once again to turn this function off.

3. Select the DEBOND option on the

Audio units without green call accept

button

Press the seek up or down button. Press

the button once again to turn this function

off.

audio unit.

4. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

5. Press the MENU button to select the

phone which is to be debonded.

Changing the active phone

Debonding a bonded phone - Sony

Note: Phones must be bonded to the

radio

system before they can be made active.

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

Using the station storage button

Note: This process is only for audio units

without a telephone keypad.

1. Press the PHONE button.

1. Press the PHONE button on the audio

2. Press the up/down arrow buttons until

unit.

you reach the DEBOND option.

2. Press the preset number required

3. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

(using the station preset buttons 1 - 6).

Using the audio unit menu

4. Press the OK button to be debond.

Note: After bonding a phone to the system,

this becomes the active phone.

USING THE TELEPHONE -

VEHICLESWITH:NAVIGATION

SYSTEM

1. Press the PHONE or call accept

button.

2. Press the MENU button on the audio

unit.

This chapter describes the phone functions

3. Select the ACTIVE PHONE option on

of the Navigation System.

the audio unit.

Note: Refer to your Navigation System

4. Scroll through the different stored

phones by using the seek buttons to

display the bonded phones.

guide for details of the controls.

An active phone must be present.

5. Press the MENU button to select the

Even if connected to the navigation

system, your phone can still be used in the

usual way.

phone which is to be the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

278

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Accepting a second incoming call

Making a call

Second incoming calls can be accepted

by pressing either the call accept button,

the MODE button on the remote control,

the PHONE button on the unit or by using

the ACCEPT option in the menu.

Dialing a number

Phone numbers can be dialed using voice

control. See Voice control (page 281).

Ending a call

Note: This will cancel the ongoing call.

Calls can be ended by pressing either the

END button, the MODE button on the

remote switch or the ON/OFF button on

the navigation system.

Rejecting a second incoming call

Second incoming calls can be rejected by

pressing either the call reject button, or one

of the following buttons on the unit: CD,

AM/FM.

Redialing a number

1. Press the PHONE button on the unit.

2. Select REDIAL.

Muting the microphone

During a call, it is possible to mute the

microphone. Whilst muted, confirmation

will appear in the display.

Receiving an incoming call

Accepting an incoming call

SD navigation units

Incoming calls can be accepted by pressing

either the call accept button, the MODE

button on the remote control, the PHONE

button on the unit or by using the ACCEPT

option in the menu.

Press the mute button (symbol of a

microphone with a line through it). Press

the button once again to turn this function

off.

Rejecting an incoming call

CD navigation units

Press the microphone mute button. Press

the button once again to turn this function

off.

Incoming calls can be rejected by pressing

either the call reject button, the CD or

AM/FM buttons on the unit, or by using

the REJECT option in the menu.

Changing the active phone

Receiving a second incoming call

Note: Phones must be bonded to the

Note: The second incoming call function

system before they can be made active.

must be activated in your phone.

Note: After bonding a phone to the system,

If there is an incoming call, whilst there is

an ongoing call, a beep will be heard and

you will have the option to end the active

call and to accept the incoming call.

this becomes the active phone.

1. Press the PHONE button on the unit.

2. Using the BT SETTINGS option in the

menu, select the active phone from the

list.

279

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Debonding a bonded phone

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

1. Press the PHONE button on the unit.

2. Select the BT SETTINGS option in the

menu.

3. Select the DEBOND option in the

menu.

4. Select the phone from the list.

280

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals