Get Telephone -> Using the telephone - Vehicles With: Navigation System Guide for Ford Mondeo 4 Door Fifth Generation (2014-2022)

Telephone

Audio units with green call accept

1. Press the PHONE or call accept

button

button.

2. Press the MENU button on the audio

Press the call accept button. Press the

unit.

button once again to turn this function off.

3. Select the DEBOND option on the

Audio units without green call accept

button

Press the seek up or down button. Press

the button once again to turn this function

off.

audio unit.

4. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

5. Press the MENU button to select the

phone which is to be debonded.

Changing the active phone

Debonding a bonded phone - Sony

Note: Phones must be bonded to the

radio

system before they can be made active.

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

Using the station storage button

Note: This process is only for audio units

without a telephone keypad.

1. Press the PHONE button.

1. Press the PHONE button on the audio

2. Press the up/down arrow buttons until

unit.

you reach the DEBOND option.

2. Press the preset number required

3. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

(using the station preset buttons 1 - 6).

Using the audio unit menu

4. Press the OK button to be debond.

Note: After bonding a phone to the system,

this becomes the active phone.

USING THE TELEPHONE -

VEHICLESWITH:NAVIGATION

SYSTEM

1. Press the PHONE or call accept

button.

2. Press the MENU button on the audio

unit.

This chapter describes the phone functions

3. Select the ACTIVE PHONE option on

of the Navigation System.

the audio unit.

Note: Refer to your Navigation System

4. Scroll through the different stored

phones by using the seek buttons to

display the bonded phones.

guide for details of the controls.

An active phone must be present.

5. Press the MENU button to select the

Even if connected to the navigation

system, your phone can still be used in the

usual way.

phone which is to be the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

278

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Accepting a second incoming call

Making a call

Second incoming calls can be accepted

by pressing either the call accept button,

the MODE button on the remote control,

the PHONE button on the unit or by using

the ACCEPT option in the menu.

Dialing a number

Phone numbers can be dialed using voice

control. See Voice control (page 281).

Ending a call

Note: This will cancel the ongoing call.

Calls can be ended by pressing either the

END button, the MODE button on the

remote switch or the ON/OFF button on

the navigation system.

Rejecting a second incoming call

Second incoming calls can be rejected by

pressing either the call reject button, or one

of the following buttons on the unit: CD,

AM/FM.

Redialing a number

1. Press the PHONE button on the unit.

2. Select REDIAL.

Muting the microphone

During a call, it is possible to mute the

microphone. Whilst muted, confirmation

will appear in the display.

Receiving an incoming call

Accepting an incoming call

SD navigation units

Incoming calls can be accepted by pressing

either the call accept button, the MODE

button on the remote control, the PHONE

button on the unit or by using the ACCEPT

option in the menu.

Press the mute button (symbol of a

microphone with a line through it). Press

the button once again to turn this function

off.

Rejecting an incoming call

CD navigation units

Press the microphone mute button. Press

the button once again to turn this function

off.

Incoming calls can be rejected by pressing

either the call reject button, the CD or

AM/FM buttons on the unit, or by using

the REJECT option in the menu.

Changing the active phone

Receiving a second incoming call

Note: Phones must be bonded to the

Note: The second incoming call function

system before they can be made active.

must be activated in your phone.

Note: After bonding a phone to the system,

If there is an incoming call, whilst there is

an ongoing call, a beep will be heard and

you will have the option to end the active

call and to accept the incoming call.

this becomes the active phone.

1. Press the PHONE button on the unit.

2. Using the BT SETTINGS option in the

menu, select the active phone from the

list.

279

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Debonding a bonded phone

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

1. Press the PHONE button on the unit.

2. Select the BT SETTINGS option in the

menu.

3. Select the DEBOND option in the

menu.

4. Select the phone from the list.

280

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone -> Using the telephone - Vehicles With: Navigation System for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals