Get Telephone -> Using the telephone - Vehicles Without: Navigation System Guide for Ford Mondeo 4 Door Fifth Generation (2014-2022)

Telephone

On vehicles with an accept and reject

Note: Press and hold the seek button to

button, phone calls can be accepted and

rejected by pressing the appropriate

button.

skip to the next letter in the alphabet.

5. Press the PHONE or the call accept

button to dial the selected phone

number.

Note: Some audio units have the accept

and reject buttons on the front bezel. These

operate in the same way.

Dialing a number using the address

book - Sony radio

You can access your phone address book

via Bluetooth. The entries will appear in

the unit display.

USING THE TELEPHONE -

VEHICLES WITHOUT:

NAVIGATION SYSTEM

1. Press the PHONE button.

2. Press the seek button until the phone

This chapter describes the phone functions

book is shown.

of the audio unit.

3. Press the up/down arrow buttons to

select the desired phone number.

Note: Refer to your audio guide for details

of the controls.

Note: Press and hold the up/down arrow

buttons to skip to the next letter in the

alphabet.

4. Press the PHONE or the call accept

button to dial the selected phone

number.

An active phone must be present.

Even if connected to the audio unit, your

phone can still be used in the usual way.

Note: You can exit the phone menu by

pressing any source button CD, AM/FM or

AUX.

Dialing a number using the telephone

Making a call

keypad

Dialing a number using voice control

Phone numbers can be dialed using voice

control. See Telephone commands

(page 291).

If you have an audio unit with a telephone

keypad (buttons 0-9, * and #):

1. Press the call accept button. Press the

PHONE button if you have a Sony

radio.

Dialing a number using the address

2. Dial the number using the telephone

book

keypad on the audio unit.

You can access your phone address book

via Bluetooth. The entries will appear in

the unit display.

3. Press the call accept button.

Note: If you enter an incorrect digit whilst

entering a phone number, press the seek left

button to erase the last digit. A long press

will erase the complete string of digits.

1. Press the PHONE or the call accept

button.

2. Press the MENU button.

Press and hold 0 to enter a + digit.

3. Keep pressing the MENU button until

Ending a call

PHONEBOOK appears.

4. Press the seek buttons to select the

desired phone number.

Calls can be ended by pressing the call

reject button.

276

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Audio units without a telephone keypad

Receiving an incoming call

Accepting an incoming call

Incoming calls can be accepted by pressing

either the call accept button, the PHONE

button or the MODE button on the remote

control.

can also end a call by pressing either

PHONE, CD, AM/FM or ON/OFF, or by

pressing the MODE button on the remote

control

Redialing a number

1. Press the PHONE or the call accept

Rejecting an incoming call

button.

2. Press the MENU button.

Incoming calls can be rejected by pressing

the call reject button.

3. Select the CALL OUT list or the CALL

IN list. On some audio units, select the

MISSED, INCOMING or OUTGOING

calls list.

Audio units without a telephone keypad

can also reject a call by pressing either

PHONE, CD, AM/FM or ON/OFF.

Note: If the active phone does not provide

a call out list, the last outgoing call

number/entry can be redialed.

Receiving a second incoming call

Note: The second incoming call function

must be activated in your phone.

4. Press the seek button on the audio unit.

5. Press the PHONE or the call accept

button to dial the desired phone

number.

If there is an incoming call whilst there is

an ongoing call, a beep will be heard and

you will have the option to end the active

call and to accept the incoming call.

Redialing a number - Sony radio

Accepting a second incoming call

1. Press the PHONE or the call accept

button.

Second incoming calls can be accepted

by pressing either the call accept button,

the PHONE button, or the MODE button

on the remote control.

2. Press the seek button until the desired

list is displayed.

Note: If the active phone does not provide

a call out list, the last outgoing call

number/entry can be redialed.

Rejecting a second incoming call

Second incoming calls can be rejected by

pressing the call reject button. Units

without a telephone keypad can also reject

a second incoming call by pressing the CD

button, or the AM/FM button.

3. Press the up/down buttons to select

the desired phone number.

4. Press the PHONE or the call accept

button to dial the phone number.

Redialing the last dialed number - Sony

Muting the microphone

During a call, it is possible to mute the

microphone. Whilst muted, confirmation

will appear in the display.

radio

1. Press the call accept button.

2. Press the call accept button a second

time to dial the number.

277

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone

Audio units with green call accept

1. Press the PHONE or call accept

button

button.

2. Press the MENU button on the audio

Press the call accept button. Press the

unit.

button once again to turn this function off.

3. Select the DEBOND option on the

Audio units without green call accept

button

Press the seek up or down button. Press

the button once again to turn this function

off.

audio unit.

4. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

5. Press the MENU button to select the

phone which is to be debonded.

Changing the active phone

Debonding a bonded phone - Sony

Note: Phones must be bonded to the

radio

system before they can be made active.

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

Using the station storage button

Note: This process is only for audio units

without a telephone keypad.

1. Press the PHONE button.

1. Press the PHONE button on the audio

2. Press the up/down arrow buttons until

unit.

you reach the DEBOND option.

2. Press the preset number required

3. Scroll through the different phones by

using the seek buttons and display the

phone to be debonded.

(using the station preset buttons 1 - 6).

Using the audio unit menu

4. Press the OK button to be debond.

Note: After bonding a phone to the system,

this becomes the active phone.

USING THE TELEPHONE -

VEHICLESWITH:NAVIGATION

SYSTEM

1. Press the PHONE or call accept

button.

2. Press the MENU button on the audio

unit.

This chapter describes the phone functions

3. Select the ACTIVE PHONE option on

of the Navigation System.

the audio unit.

Note: Refer to your Navigation System

4. Scroll through the different stored

phones by using the seek buttons to

display the bonded phones.

guide for details of the controls.

An active phone must be present.

5. Press the MENU button to select the

Even if connected to the navigation

system, your phone can still be used in the

usual way.

phone which is to be the active phone.

Debonding a bonded phone

A bonded phone can be deleted from the

system at any time, unless a phone call is

in progress.

278

Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013

Telephone -> Using the telephone - Vehicles Without: Navigation System for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals