Get Keys and Remote Controls Guide for Ford Mustang 2 Door Seventh Generation (2024-2026)

REMOTE CONTROL

LIMITATIONS

WARNING: Changes or

modifications not expressively approved

by the party responsible for compliance

could void the user's authority to operate

the equipment. The term "IC:" before the

radio certification number only signifies

that Industry Canada technical

specifications were met.

This device complies with Part 15 of the

FCC Rules and with Industry Canada

license-exempt RSS standard(s).

Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) This device

must accept any interference received,

including interference that may cause

undesired operation.

Make sure a valid remote control is within

3 ft (1 m) from the front door handles and

rear of vehicle.

The system may not function if:

• The remote control remains stationary

for about a minute.

• The vehicle battery has no charge.

• The remote control battery has no

charge.

• There is interference causing issues

with the remote control frequencies.

• The remote control is too close to

metal objects or electronic devices, for

example keys or a cell phone.

USING THE REMOTE CONTROL

WARNING: Do not leave a key or

remote control unattended in the vehicle.

Children or pets could operate the power

windows, moonroof or other controls.

Failure to follow this instruction could

result in personal injury or death.

Use your remote control to access various

vehicle systems.

Note: The buttons on your remote may vary

depending on the vehicle region or options.

One-Stage Unlocking

E138629

Press the button to unlock all

doors. See Unlocking and

Locking the Doors Using the

Remote Control (page 69).

Two-Stage Unlocking (If Equipped)

E138629

Press the button to unlock the

driver's door. Press the button

again within three seconds to

unlock all doors. See Unlocking and

Locking the Doors Using the Remote

Control (page 69).

Lock

E138623

Press the button to lock all

doors. See Unlocking and

Locking the Doors Using the

Remote Control (page 69).

Panic Alarm (If Equipped)

E138624

Press the button to sound the

panic alarm. See Sounding the

Panic Alarm (page 63).

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

Remote Start (If Equipped)

E138625

Press the button to remote start.

See Using Remote Start (page

105).

Luggage Compartment

E138630

Press the button twice to open

the luggage compartment.

REMOVING THE KEY BLADE

E322866

Push the release button on your passive

key and pull the key blade out.

SOUNDING THE PANIC ALARM

E138624

Press the button to sound the

panic alarm. Press the button

again or switch the vehicle on to

turn it off.

Note: The panic alarm only operates when

the vehicle is off.

LOCATING YOUR VEHICLE

E138623

Press the lock button twice

within three seconds. The turn

signal lamps flash. We

recommend you use this method to locate

your vehicle.

CHANGING THE REMOTE

CONTROL BATTERY

WARNING: Keep batteries away

from children to prevent ingestion.

Failure to follow this instruction could

result in personal injury or death. If

ingested, immediately seek medical

attention.

WARNING: If the battery

compartment does not securely close,

stop using the remote control and

replace it as soon as possible. In the

meantime, keep the remote control away

from children. Failure to follow this

instruction could result in personal injury

or death.

The remote control uses one coin-type

3-volt lithium battery, CR2450, or

equivalent.

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

E322866

1. Push the release button and pull the

key blade out.

E303824

2. Twist a thin coin under the tab hidden

behind the key blade head to remove

the battery cover.

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

E218402

3. Insert a screwdriver in the position

shown and carefully remove the

battery.

4. Insert a new battery with the + facing

upward.

5. Reinstall the battery cover onto the

remote control and install the key

blade.

E107998

Note: Refer to local regulations before you

dispose of the remote control batteries.

Note: Do not wipe off any grease on the

battery terminals or on the back surface of

the circuit board.

Note: Replacing the remote control battery

does not erase the programmed key from

your vehicle. The remote control operates

as normal.

Note: A message appears in the

information display when the remote control

battery is low.

REPLACING A LOST KEY OR

REMOTE CONTROL

You can purchase replacement keys or

remote controls from an authorized dealer.

Authorized dealers can program remote

controls for your vehicle.

PROGRAMMING THE REMOTE

CONTROL

General Information

Make sure you are ready with the following

before programming the remote control.

• You must have two previously

programmed remote controls inside

your vehicle. Contact an authorized

dealer to have the spare remote control

programmed if two previously

programmed remotes are not

available.

• The new unprogrammed remote

controls must be readily accessible.

• Make sure that your vehicle is off.

• Make sure that you close all the doors

and that they remain closed

throughout the procedure.

Perform all steps within 30 seconds of

starting the sequence. Stop and wait for

at least one minute before starting again

if you perform any steps out of sequence.

Read and understand the entire procedure

before you begin.

Note: You can program a maximum of four

remote controls to your vehicle.

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

Note: If your programmed remote controls

are lost or stolen and you do not have an

extra coded remote, you need to have your

vehicle towed to an authorized dealer. Store

an extra programmed remote away from

your vehicle in a safe place to help prevent

any inconvenience. Contact an authorized

dealer to purchase additional spare or

replacement remotes.

Steps for Programming Your Spare

Remote Control

E386267

1. Access the backup slot.

2. Place the first programmed remote in

the backup slot in the center console

with the buttons facing up. With your

foot off the brake pedal, press and

release the push button ignition switch.

3. Wait five seconds and then press and

release the push button ignition switch

again.

4. Remove the remote control.

5. Within 10 seconds, place a second

programmed remote control in the

backup slot. Press and release the push

button ignition switch.

6. Wait five seconds and then press and

release the push button ignition switch

again. Keep the ignition on for at least

three seconds, but no more than 10

seconds.

7. Remove the remote control.

8. Place the unprogrammed remote

control in the backup slot and press

and release the push button ignition

switch.

Programming is now complete. With your

foot on the brake pedal, press the push

button ignition switch to verify the remote

control functions operate and your vehicle

starts with the new remote control.

If programming was not successful, wait

10 seconds and repeat steps 1 through 7. If

you are still unsuccessful, take your vehicle

to an authorized dealer.

KEYS AND REMOTE

CONTROLS AUDIBLE

WARNINGS

Key In Reminder

Sounds when the following conditions are

met:

• Vehicle is out of park (P).

• You switch the vehicle off.

• You open the driver's door.

• You have left the key inside the vehicle.

USING THE VALET MODE

What is Valet Mode

The valet mode allows you to limit the

access of these features:

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

• Audio system.

• Voice interaction.

• Phone.

• Navigation.

• Memory function (if equipped).

Valet Mode Limitations

Make sure your vehicle is on and the

remote control is inside the vehicle.

The system does not function if any of the

following occur:

• The vehicle speed is greater than

8km/h.

• The vehicle is not in park (P) for

automatic transmission or in neutral

(N) for manual transmission.

Enabling Classic Valet Mode

Make sure the remote control is in your

vehicle.

1. From the settings menu, press Valet

Mode.

2. Enter a four digit code to lock the

touchscreen.

3. Re-enter the same four digit code to

complete enabling valet mode.

Disabling Classic Valet Mode

1. Press Exit Valet Mode.

2. Enter your four digit code to disable

valet mode and unlock the

touchscreen.

REMOTE REV (IF EQUIPPED)

WHAT IS REMOTE REV

Allows you to remotely command engine

speed using your remote control to enjoy

the engine sound from outside of the

vehicle.

REMOTE REV LIMITATIONS

The system does not function, or

deactivates, in the following conditions:

• The engine is off.

• The remote control is not working.

• The remote control is out of range.

• The transmission is not in park (P).

• The accelerator or brake pedal is

pressed.

• The engine oil temperature is too high

or too low.

• The engine coolant temperature is too

high or too low.

• The catalytic converter temperature is

too high or too low.

• The engine speed is not at stable idle

condition.

• The automatic engine shutdown is

activated.

• Any system fault is detected.

USING REMOTE REV

WARNING: Do not start the engine

in a closed garage or in other enclosed

areas. Exhaust fumes are toxic. Always

open the garage door before you start

the engine. Failure to follow this

instruction could result in personal injury

or death.

1. Start the engine.

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

Note: Remote Rev is not available until

system reaches optimal temperature after

a cold start. For ambient temperatures of

41°F (5°C) and above, it may take up to one

minute to reach the appropriate system

temperatures to enable the feature. For

ambient temperatures lower than 41°F

(5°C) the system takes longer to reach the

appropriate temperature, depending on the

ambient temperature.

E138629

Press the unlock button on

the remote control.

E138623

Within three seconds, press

the lock button on the remote control.

Note: Engine RPM quickly increases to

confirm that the feature is enabled.

E138629

With remote rev enabled,

press the unlock button on the remote

control.

E138623

Within three seconds, press

the lock button on the remote control.

Note: The engine accelerates strongly.

Note: You can still lock or unlock your

vehicle when using the feature.

Note: If your vehicle has active exhaust, it

automatically switches to track position to

enhance engine sound and feature

experience. It returns to the initial position

once the feature is disabled.

KEYS AND REMOTE CONTROLS – TROUBLESHOOTING

KEYS AND REMOTE CONTROLS – INFORMATION MESSAGES

ActionMessage

Replace remote control battery.Key Battery Low Replace

Soon

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Keys and Remote Controls

Keys and Remote Controls for Your Ford Mustang 2 Door Seventh Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals