Note: Refer to local regulations before you
dispose of the remote control batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the remote control battery
does not erase the programmed key from
your vehicle. The remote control operates
as normal.
Note: A message appears in the
information display when the remote control
battery is low.
REPLACING A LOST KEY OR
REMOTE CONTROL
You can purchase replacement keys or
remote controls from an authorized dealer.
Authorized dealers can program remote
controls for your vehicle.
PROGRAMMING THE REMOTE
CONTROL
General Information
Make sure you are ready with the following
before programming the remote control.
• You must have two previously
programmed remote controls inside
your vehicle. Contact an authorized
dealer to have the spare remote control
programmed if two previously
programmed remotes are not
available.
• The new unprogrammed remote
controls must be readily accessible.
• Make sure that your vehicle is off.
• Make sure that you close all the doors
and that they remain closed
throughout the procedure.
Perform all steps within 30 seconds of
starting the sequence. Stop and wait for
at least one minute before starting again
if you perform any steps out of sequence.
Read and understand the entire procedure
before you begin.
Note: You can program a maximum of four
remote controls to your vehicle.
65
Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM
Keys and Remote Controls
English 
