Note: If your programmed remote controls
are lost or stolen and you do not have an
extra coded remote, you need to have your
vehicle towed to an authorized dealer. Store
an extra programmed remote away from
your vehicle in a safe place to help prevent
any inconvenience. Contact an authorized
dealer to purchase additional spare or
replacement remotes.
Steps for Programming Your Spare
Remote Control
1. Access the backup slot.
2. Place the first programmed remote in
the backup slot in the center console
with the buttons facing up. With your
foot off the brake pedal, press and
release the push button ignition switch.
3. Wait five seconds and then press and
release the push button ignition switch
again.
4. Remove the remote control.
5. Within 10 seconds, place a second
programmed remote control in the
backup slot. Press and release the push
button ignition switch.
6. Wait five seconds and then press and
release the push button ignition switch
again. Keep the ignition on for at least
three seconds, but no more than 10
seconds.
7. Remove the remote control.
8. Place the unprogrammed remote
control in the backup slot and press
and release the push button ignition
switch.
Programming is now complete. With your
foot on the brake pedal, press the push
button ignition switch to verify the remote
control functions operate and your vehicle
starts with the new remote control.
If programming was not successful, wait
10 seconds and repeat steps 1 through 7. If
you are still unsuccessful, take your vehicle
to an authorized dealer.
KEYS AND REMOTE
CONTROLS AUDIBLE
WARNINGS
Key In Reminder
Sounds when the following conditions are
met:
• Vehicle is out of park (P).
• You switch the vehicle off.
• You open the driver's door.
• You have left the key inside the vehicle.
USING THE VALET MODE
What is Valet Mode
The valet mode allows you to limit the
access of these features:
66
Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM
Keys and Remote Controls
English 
