Get Adaptive Cruise Control Guide for Ford Puma SUV 2019-2024

Adaptive Cruise Control

HOW DOES ADAPTIVE CRUISE

CONTROL WORK - VEHICLES

WARNING: Pay close attention to

changing road conditions such as

WITH: ADAPTIVE CRUISE

entering or leaving a highway, on roads

CONTROL

with intersections or roundabouts, roads

without visible lanes of travel, roads that

Adaptive cruise control uses radar and

are unpaved, or steep slopes. Failure to

camera sensors to maintain a set gap

follow this instruction could result in the

between your vehicle and the vehicle in

loss of control of your vehicle, personal

front of you.

injury or death.

WARNING: The system is not a

HOW DOES ADAPTIVE CRUISE

crash warning or avoidance system.

CONTROL WITH STOP AND GO

WARNING: Do not use the system

WORK - VEHICLES WITH:

when towing a trailer that has

ADAPTIVE CRUISE CONTROL

aftermarket electronic trailer brake

WITH LANE CENTERING

controls. Failure to follow this instruction

could result in the loss of control of your

vehicle, personal injury or death.

Adaptive cruise control with stop and go

uses radar and camera sensors to maintain

WARNING: Do not use tire sizes

a set gap between your vehicle and the

other than those recommended because

vehicle in front of you while following it to

this can affect the normal operation of

a complete stop. Stop and go can also be

the system. Failure to do so may result

set to follow a vehicle directly in front of

in a loss of vehicle control, which could

you and adjust the set speed, while you are

result in serious injury.

at a complete stop.

WARNING: Do not use the system

ADAPTIVE CRUISE CONTROL

with a snow plow blade installed.

PRECAUTIONS

WARNING: Do not use the system

in poor visibility, for example fog, heavy

rain, spray or snow.

WARNING: You are responsible for

controlling your vehicle at all times. The

When Following a Vehicle

system is designed to be an aid and does

not relieve you of your responsibility to

drive with due care and attention. Failure

WARNING: When following a

to follow this instruction could result in

vehicle that is braking, your vehicle does

the loss of control of your vehicle,

not always decelerate quickly enough to

personal injury or death.

avoid a crash without driver intervention.

Apply the brakes when necessary. Failure

WARNING: Do not use adaptive

to follow this instruction could result in

cruise control on winding roads, in heavy

personal injury or death.

traffic or when the road surface is

slippery. This could result in loss of

vehicle control, serious injury or death.

253

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Hilly Condition Usage

WARNING: The system does not

Select a lower gear when the system is

detect oncoming vehicles in the same

active in situations such as prolonged

lane.

downhill driving on steep slopes, for

example in mountainous areas.

WARNING: The system may not

operate properly if the sensor is blocked.

ADAPTIVE CRUISE CONTROL

Keep the windshield free from

obstruction.

LIMITATIONS

WARNING: The sensor may

Sensor Limitations

incorrectly track lane markings as other

structures or objects. This can result in

a false or missed warning.

WARNING: On rare occasions,

detection issues can occur due to the

road infrastructures, for example bridges,

tunnels and safety barriers. In these

cases, the system may brake late or

unexpectedly. At all times, you are

responsible for controlling your vehicle,

supervising the system and intervening,

if required.

WARNING: If the system

E243054

malfunctions, have your vehicle checked

The camera is mounted behind the interior

as soon as possible.

mirror.

WARNING: Large contrasts in

outside lighting can limit sensor

performance.

WARNING: The system only warns

of vehicles detected by the radar sensor.

In some cases there may be no warning

or a delayed warning. Apply the brakes

when necessary. Failure to follow this

instruction could result in personal injury

or death.

E244279

WARNING: The system may not

detect stationary or slow moving

The radar is behind the front grille below

vehicles below 10 km/h (6 mph).

the license plate.

Note: You cannot see the sensor. It is

WARNING: The system does not

behind a fascia panel.

detect pedestrians or objects in the road.

254

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Note: Keep the front of your vehicle free of

Detection Issues Can Occur:

dirt, metal badges or objects. Vehicle front

protectors, aftermarket lights, additional

paint or plastic coatings could also degrade

sensor performance.

A message displays if something obstructs

the camera or the sensor. When something

blocks the sensor, the system cannot

detect a vehicle ahead and does not

function. See Adaptive Cruise Control

– Information Messages (page 266).

The radar sensor has a limited field of view.

It may not detect vehicles at all or detect

a vehicle later than expected in some

situations. The lead vehicle image does

not illuminate if the system does not

detect a vehicle in front of you.

E71621

When driving on a different lane

than the vehicle in front.

With vehicles that edge into your

lane. The system can only detect

these vehicles once they move

fully into your lane.

There may be issues with the

detection of vehicles in front

when driving into and coming out

of a bend or curve in the road.

In these cases, the system may brake late

or unexpectedly.

If something hits the front end of your

vehicle or damage occurs, the

radar-sensing zone may change. This could

cause missed or false vehicle detection.

255

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Optimal system performance requires a

ADAPTIVE CRUISE CONTROL

clear view of the road by the windshield

AUTOMATIC CANCELLATION

camera.

- VEHICLES WITH: ADAPTIVE

Optimal performance may not occur if:

CRUISE CONTROL

•

The camera is blocked.

•

There is poor visibility or lighting

The system does not operate if the vehicle

conditions.

speed is below 15 mph when in imperial

units or 20 km/h when in metric units. A

•

There are bad weather conditions.

tone sounds and adaptive braking releases

if the vehicle speed falls below 15 mph

SWITCHING ADAPTIVE

when in imperial units or 20 km/h when in

CRUISE CONTROL ON AND OFF

metric units.

Automatic cancellation can also occur

The cruise controls are on the steering

when:

wheel. See What Is Cruise Control

• The tires lose traction.

(page 251).

• You apply the parking brake.

Switching Adaptive Cruise Control

Note: If the engine speed drops too low,

the instrument cluster display advises you

to shift to a lower gear.

Press the button to set the

system in standby mode.

The system could deactivate or prevent

E144529

activating when requested if:

The indicator, current gap setting and set

• The vehicle has a blocked sensor.

speed appear in the information display.

• The brake temperature is too high.

Switching Adaptive Cruise Control

• There is a failure in the system.

Off

ADAPTIVE CRUISE CONTROL

Press the button when the

system is in standby mode, or

AUTOMATIC CANCELLATION

E144529

switch the ignition off.

- VEHICLES WITH: ADAPTIVE

Note: You erase the set speed when you

CRUISE CONTROL WITH LANE

switch the system off.

CENTERING

The system cancels if any of the following

occur:

• You apply the parking brake.

• You unfasten the seatbelt if your

vehicle is stationary.

• Your vehicle remains stationary for

longer than three minutes.

• The tires lose traction.

256

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Press and release the toggle

SETTING THE ADAPTIVE

E246885

button downward to decrease

CRUISE CONTROL SPEED -

the set speed in small

VEHICLES WITH: ADAPTIVE

increments.

CRUISE CONTROL

Press and hold the toggle button

downward to decrease the set speed in

Drive to the speed you prefer.

large increments. Release the button when

Press the toggle button upward

you reach the speed you prefer.

E246884

or downward to set the current

Press the accelerator or brake pedal until

speed.

you reach the speed you prefer. Press the

toggle button upward or downward to

E246885

select the current speed as the set speed.

The system may apply the brakes to slow

Take your foot off the accelerator pedal.

the vehicle to the new set speed. The set

The indicator, current gap setting and set

speed displays continuously in the

speed appear in the information display.

information display when the system is

active.

SETTING THE ADAPTIVE

CRUISE CONTROL SPEED -

VEHICLES WITH: ADAPTIVE

CRUISE CONTROL WITH LANE

CENTERING

E255686

A vehicle image illuminates if there is a

Drive to the required speed.

vehicle detected in front of you.

Press the toggle button upward

Note: When adaptive cruise control is

E246884

to set the current speed.

active, the speedometer may vary slightly

from the set speed displayed in the

Take your foot off the accelerator pedal.

information display.

The indicator, current gap setting and set

Manually Changing the Set Speed

speed appear in the instrument cluster

display.

Press and release the toggle

E246884

button upward to increase the

set speed in small increments.

Press and hold the toggle button upward

to increase the set speed in large

increments. Release the button when you

reach the speed you prefer.

E249552

257

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

A vehicle graphic appears in the instrument

SETTING THE ADAPTIVE

cluster display if the system detects a

CRUISE CONTROL GAP -

vehicle in front of you.

VEHICLES WITH: ADAPTIVE

Note: When adaptive cruise control is

CRUISE CONTROL

active, the speedometer could vary slightly

from the set speed displayed in the

Press the button to cycle

instrument cluster display.

through the four gap settings.

Setting the Adaptive Cruise Speed

When Your Vehicle is Stationary

1. Follow a vehicle to a complete stop.

2. Keep the brake pedal fully pressed.

3. Press and release SET+ or SET-.

The set speed adjusts to 30 km/h

(20 mph).

The indicator, current gap setting and set

E255686

speed appear in the instrument cluster

The selected gap appears in the

display.

instrument cluster display as shown by the

bars in the image.

Changing the Set Speed

Note: The gap setting is time dependent

Press the toggle button upward

and therefore, the distance adjusts with your

E246884

to increase the set speed.

vehicle speed.

Press the toggle button

Note: It is your responsibility to select a gap

E246885

downward to decrease the set

appropriate to the driving conditions.

speed.

Adaptive Cruise Control Gap Settings

You can adjust the set speed in small or

Graphic

Gap Distance

Dynamic

large increments. Press the toggle button

Display,

Behavior

upward or downward once to adjust the

Bars Indic-

set speed in small increments. Press and

ated

hold the toggle button upward or

Between

downward to adjust the set speed in large

Vehicles

increments.

Closest.

Sport.

The system could apply the brakes to slow

your vehicle to the new set speed. The set

Close.

Normal.

speed continuously displays in the

instrument cluster display when the

Medium.

Normal.

system is active.

Far.

Comfort.

Each time you switch the system on, it

selects the last chosen gap setting.

258

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Following a Vehicle

Note: It is your responsibility to select a gap

appropriate to the driving conditions.

When a vehicle ahead of you enters the

same lane or a slower vehicle is ahead in

the same lane, the vehicle speed adjusts

to maintain the gap setting.

Note: When you are following a vehicle and

you switch on a turn signal lamp, adaptive

cruise control may provide a small,

temporary acceleration to help you pass.

Your vehicle maintains a consistent gap

E249552

from the vehicle ahead until:

The selected gap appears in the

• The vehicle in front of you accelerates

instrument cluster display as shown by the

to a speed above the set speed.

bars in the image. You can select four gap

• The vehicle in front of you moves out

settings.

of the lane you are in.

Adaptive Cruise Control Gap Settings

• You set a new gap distance.

The system applies the brakes to slow

Graphic

Gap Distance

Dynamic

down your vehicle to maintain a safe gap

Display,

Behavior

distance from the vehicle in front of you.

Bars Indic-

The system only applies limited braking.

ated

You can override the system by applying

Between

the brakes.

Vehicles

Note: The brakes may emit noise when

Closest.

Sport.

applied by the system.

Close.

Normal.

If the system determines that its maximum

braking level is not sufficient, an audible

Medium.

Normal.

warning sounds, a message appears in the

instrument cluster display and an indicator

Far.

Comfort.

flashes when the system continues to

brake. Take immediate action.

When you switch the ignition on, the

system automatically selects the last

chosen gap setting.

SETTING THE ADAPTIVE

CRUISE CONTROL GAP -

Following a Vehicle

VEHICLES WITH: ADAPTIVE

When a vehicle ahead of you enters the

CRUISE CONTROL WITH LANE

same lane or a slower vehicle is ahead in

CENTERING

the same lane, the vehicle speed adjusts

to maintain a preset gap distance. A

vehicle graphic appears in the instrument

You can decrease or increase the

cluster display.

distance between your vehicle

and the vehicle in front by

pressing the gap control.

259

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

Note: When you are following a vehicle and

The last set speed displays with a

you switch on a direction indicator, adaptive

strikethrough and the last gap setting

cruise control may provide a small

appears but does not erase.

temporary acceleration to help you pass.

Note: The set speed also cancels if you

Your vehicle maintains a consistent gap

press the clutch pedal for an extended

from the vehicle ahead until:

period.

• The vehicle in front of you accelerates

to a speed above the set speed.

RESUMING THE SET SPEED

• The vehicle in front of you moves out

of the lane you are in.

Press the button.

• You set a new gap distance.

The system applies the brakes to slow your

Your vehicle speed returns to the

vehicle to maintain a safe gap distance

previously set speed and gap setting. The

from the vehicle in front. The system only

set speed displays continuously in the

applies limited braking. You can override

information display when the system is

the system by applying the brakes.

active.

If the system determines that its maximum

Note: Only use resume if you are aware of

braking level will not be sufficient, an

the set speed and intend to return to it.

audible warning sounds when the system

continues to brake. Take immediate

action.

OVERRIDING THE SET SPEED

Following a Vehicle to a Complete

Stop

WARNING: If you override the

If your vehicle follows a vehicle to a

system by pressing the accelerator

complete stop and remains stationary for

pedal, it does not automatically apply

less than three seconds, your vehicle

the brakes to maintain a gap from any

accelerates from a stationary position to

vehicle ahead.

follow the vehicle ahead.

When you press the accelerator pedal, you

If your vehicle follows a vehicle

override the set speed and gap distance.

to a complete stop and remains

stationary for more than three

Use the accelerator pedal to intentionally

seconds, press and release the button or

exceed the set speed limit.

press the accelerator pedal to follow the

When you override the system, the green

vehicle ahead.

indicator illuminates and the vehicle icon

Note: The brakes may emit noise when

does not appear in the instrument cluster

applied by the system.

display.

The system resumes operation when you

CANCELING THE SET SPEED

release the accelerator pedal. The vehicle

speed decreases to the set speed, or a

Press the button, or tap the

lower speed if following a slower vehicle.

brake pedal.

260

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

The cruise control indicator

ADAPTIVE CRUISE CONTROL

replaces the adaptive cruise

INDICATORS

E332905

control indicator if you select

normal cruise control. The gap setting

Illuminates when you switch

does not display, and the system does not

adaptive cruise control on. The

respond to lead vehicles. Automatic

E144529

color of the indicator changes to

braking remains active to maintain the set

indicate the system status.

speed. The system remembers the last

setting when you start your vehicle.

White indicates the system is on but

inactive.

SWITCHING FROM ADAPTIVE

Green indicates that you set the speed and

the system is active.

CRUISE CONTROL TO CRUISE

CONTROL - VEHICLES WITH:

SWITCHING FROM ADAPTIVE

12.3 INCH INSTRUMENT

CRUISE CONTROL TO CRUISE

CLUSTER DISPLAY SCREEN/

CONTROL - VEHICLES WITH:

SYNC 2.5

4.2 INCH INSTRUMENT

CLUSTER DISPLAY SCREEN/

SYNC 2.5

WARNING: Normal cruise control

will not brake when your vehicle is

approaching slower vehicles. Always be

aware of which mode you have selected

WARNING: Normal cruise control

and apply the brakes when necessary.

will not brake when your vehicle is

approaching slower vehicles. Always be

Press the menu button on the steering

aware of which mode you have selected

wheel to enter the instrument cluster

and apply the brakes when necessary.

display main menu.

2. Select Settings.

Using the instrument cluster display

controls on the steering wheel, select

3. Select Driver assistance.

Settings.

4. Select Cruise control.

Select Driver assistance.

5. Select a setting and press the OK

Select Cruise control.

button.

Select Mode.

The cruise control indicator light

replaces the adaptive cruise

Select a setting and press the OK

control indicator light if you

E71340

button.

select normal cruise control. The gap

setting does not display, the system does

not automatically respond to vehicles in

front of you and automatic braking does

not activate. The system remembers the

last setting when you start your vehicle.

261

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

LANE CENTERING PRECAUTIONS

SWITCHING FROM ADAPTIVE

CRUISE CONTROL TO CRUISE

CONTROL - VEHICLES WITH:

WARNING: Do not use the system

SYNC 3

when towing a trailer. Failure to follow

this instruction could result in the loss of

control of your vehicle, personal injury or

death.

WARNING: Normal cruise control

will not brake when your vehicle is

WARNING: Do not use the system

approaching slower vehicles. Always be

if any changes or modifications to the

aware of which mode you have selected

steering wheel have been made. Any

and apply the brakes when necessary.

changes or modifications to the steering

wheel could affect the functionality or

Press Settings on the touchscreen.

performance of the system. Failure to

Press Driver Assistance.

follow this instruction could result in the

loss of control of your vehicle, personal

Press Cruise Control.

injury or death.

Press Normal.

Adaptive cruise control precautions apply

LANE CENTERING

to lane centering unless stated otherwise

or contradicted by a lane centering

precaution. See Adaptive Cruise Control

HOW DOES LANE CENTERING

Precautions (page 253).

WORK

LANE CENTERING

Adaptive cruise control with lane centering

REQUIREMENTS

uses radar and camera sensors to help

keep your vehicle in the middle of the lane

You must keep your hands on the steering

by applying continuous assistance steering

wheel at all times.

torque input toward the lane center on

highways.

The system only activates when all of the

following occur:

Note: The adaptive cruise control gap

setting operates normally.

• You have adaptive cruise control with

stop and go on.

If you drive off-center within the lane, the

• You have your hands on the steering

system sets and maintains that preferred

wheel at all times.

lane position. The system provides

continuous assistance steering torque

• The system detects both lane

input toward the preferred position.

markings.

Note: The system can only set preferred

• The vehicle is centered in the lane.

lane positions within the lane.

Note: If it does not detect valid lane

Note: If the system cancels, the preferred

markings, the system stays inactive until

position erases. On the next activation, the

valid markings are available.

system provides continuous assistance

steering torque input toward the lane center.

262

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

LANE CENTERING LIMITATIONS

The indicator appears in the instrument

cluster display. When the system is on, the

Adaptive cruise control limitations apply

color of the indicator changes to indicate

to lane centering unless stated otherwise

the system status.

or contradicted by a lane centering

You can override the system at any time

limitation. See Adaptive Cruise Control

by steering your vehicle.

Limitations (page 254).

Note: The correct requirements must be

Lane Centering may not correctly operate

met before you can switch the system on.

in any of the following conditions:

See Lane Centering Requirements (page

• The lane is too narrow or wide.

262).

• The system does not detect at least

one lane marking or when lanes merge

LANE CENTERING ALERTS

or split.

You must keep your hands on the steering

• Limited steering torque input is applied.

wheel at all times.

• Areas under construction or new

infrastructure.

When the system is active and detects no

steering activity for a period of time, the

• When modifications to the steering

system alerts you to put your hands on the

system have been made.

steering wheel. If you do not react to the

• When using a spare tire.

warnings the system cancels and slows

• In high wind conditions.

your vehicle down to idle speeds while

maintaining steering control. See Lane

Note: The driving assistance torque is

Centering Automatic Cancellation

limited and may not be sufficient for all

(page 263).

driving situations such as driving through

tight curves or driving through curves at high

The system also alerts you if your vehicle

speeds.

crosses lane markings without detected

steering activity.

Note: In exceptional conditions, such as

inclement weather or direct sunlight, the

Note: The system could detect a light grip

system could deviate from the center line

or touch on the steering wheel as hands-off

or could cancel.

driving.

SWITCHING LANE CENTERING ON

LANE CENTERING AUTOMATIC

AND OFF

CANCELLATION

You must keep your hands on the steering

wheel at all times.

The controls are on the steering wheel.

When an external condition cancels the

See Visual Search (page 25).

system, for example, no lane markings are

available and your hands are on the

Press the button.

steering wheel, a tone sounds and a

message appears in the instrument cluster

E262175

display.

263

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

When an external condition cancels the

Green indicates the system is active and

system, for example, no lane markings are

applying steering torque assistance input

available and your hands are not on the

to keep your vehicle in the center of the

steering wheel, the system immediately

lane.

alerts you to take control of the vehicle. If

Amber with an audible tone and then gray

this alert is ignored, the system slows the

indicates a system automatic cancellation.

vehicle while maintaining steering control.

If your vehicle starts to slow

INTELLIGENT ADAPTIVE

down, you must contribute to

the steering control and press

CRUISE CONTROL - VEHICLES

and release the button or briefly press the

WITH: INTELLIGENT ADAPTIVE

accelerator pedal to regain full system

performance.

CRUISE CONTROL

Automatic cancellation can also occur if:

HOW DOES INTELLIGENT

• The lane becomes too wide or narrow.

ADAPTIVE CRUISE CONTROL

• The system cannot detect valid lane

WORK

markings.

Intelligent adaptive cruise control

• Lane markings are crossed.

combines speed sign recognition and

• The curve of the road is too sharp.

navigation map data with adaptive cruise

Note: The system disables until the next

control to adjust the cruise set speed to

key cycle if your vehicle slows down due to

the speed limit detected by the speed sign

driver inactivity twice within a key cycle.

recognition system. As the system detects

new speed signs, the set speed updates.

You initiate a cancellation when the

system is active and you switch the turn

There are limitations that affect the

signal lamp on. The system immediately

accuracy of the speed sign recognition

cancels. The system remains in standby

system and its ability to determine the

mode as long as the turn signal lamp is

current speed limit. The intelligent

engaged. The system automatically

adaptive cruise control system and its

re-activates once the vehicle is centered

ability to determine the current speed limit

in a lane and the turn signal lamp is

shares these limitations. See Speed Sign

switched off.

Recognition (page 314).

Note: The adaptive cruise control gap

LANE CENTERING INDICATORS

setting operates normally when the feature

is enabled.

The indicator appears in the

instrument cluster display when

you switch lane centering on.

E262175

When the system is on, the color of the

indicator changes to indicate the system

status.

Gray indicates the system is on but

inactive.

264

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

INTELLIGENT ADAPTIVE CRUISE

SWITCHING INTELLIGENT MODE

CONTROL PRECAUTIONS

ON AND OFF - VEHICLES WITH:

12.3 INCH INSTRUMENT CLUSTER

DISPLAY SCREEN/SYNC 2.5

WARNING: You are responsible for

Press the menu button on the steering

controlling your vehicle at all times. The

wheel to enter the instrument cluster

system is designed to be an aid and does

display main menu.

not relieve you of your responsibility to

drive with due care and attention. Failure

Select Settings.

to follow this instruction could result in

Select Driver assistance.

the loss of control of your vehicle,

Select Cruise control.

personal injury or death.

Select Intelligent.

INTELLIGENT ADAPTIVE CRUISE

SWITCHING INTELLIGENT MODE

CONTROL LIMITATIONS

ON AND OFF - VEHICLES WITH:

SYNC 3

The speed limit information provided by

the navigation map data could be

Press Settings on the touchscreen.

inaccurate or out of date.

Press Driver Assistance.

The system may not detect and read

Press Cruise Control.

speed limit signs with conditional

information, for example, when a sign is

Press Intelligent.

flashing, during specific time ranges, or

when children are present.

INTELLIGENT ADAPTIVE CRUISE

Note: The system does not set the vehicle

CONTROL ALERTS

speed to speed limits shown with a

supplementary traffic sign.

If the speed sign recognition system

detects a speed limit below the minimum

Under certain conditions, the system may

adaptive cruise control set speed, a tone

not adjust the vehicle speed until after your

sounds and the system returns to standby

vehicle passes the speed limit.

mode.

SWITCHING INTELLIGENT MODE

INTELLIGENT ADAPTIVE CRUISE

ON AND OFF - VEHICLES WITH: 4.2

CONTROL INDICATORS

INCH INSTRUMENT CLUSTER

DISPLAY SCREEN/SYNC 2.5

Using the instrument cluster display

controls on the steering wheel, select

Settings.

Select Driver assistance.

Select Cruise control.

Select Mode.

E265663

Select a setting and press the OK

button.

265

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control

If you select this mode, a bracket appears

ADAPTIVE CRUISE CONTROL

around the set speed and the detected

– TROUBLESHOOTING

speed limit sign in the instrument cluster

display.

ADAPTIVE CRUISE CONTROL –

INFORMATION MESSAGES -

VEHICLES WITH: ADAPTIVE

CRUISE CONTROL

Note: Depending on your vehicle options

and instrument cluster type, not all

messages display or are available.

Note: The system could abbreviate or

shorten certain messages depending upon

which cluster type you have.

Message

Action

Adaptive cruise control

Displays when the sensor has reduced visibility.

not available Sensor

blocked See manual

Adaptive cruise control

Displays when the system is not available.

not available

Adaptive cruise control

The system has malfunctioned. Have your vehicle checked

malfunction

as soon as possible.

Cruise control active

You have switched normal cruise control on. Adaptive braking

Adaptive braking off

turns off.

266

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Adaptive Cruise Control for Your Ford Puma SUV 2019-2024

Related Topics

Popular Owner Manuals

Latest Owner Manuals