Adaptive Cruise Control
A vehicle graphic appears in the instrument
SETTING THE ADAPTIVE
cluster display if the system detects a
CRUISE CONTROL GAP -
vehicle in front of you.
VEHICLES WITH: ADAPTIVE
Note: When adaptive cruise control is
CRUISE CONTROL
active, the speedometer could vary slightly
from the set speed displayed in the
Press the button to cycle
instrument cluster display.
through the four gap settings.
Setting the Adaptive Cruise Speed
When Your Vehicle is Stationary
1. Follow a vehicle to a complete stop.
2. Keep the brake pedal fully pressed.
3. Press and release SET+ or SET-.
The set speed adjusts to 30 km/h
(20 mph).
The indicator, current gap setting and set
E255686
speed appear in the instrument cluster
The selected gap appears in the
display.
instrument cluster display as shown by the
bars in the image.
Changing the Set Speed
Note: The gap setting is time dependent
Press the toggle button upward
and therefore, the distance adjusts with your
E246884
to increase the set speed.
vehicle speed.
Press the toggle button
Note: It is your responsibility to select a gap
E246885
downward to decrease the set
appropriate to the driving conditions.
speed.
Adaptive Cruise Control Gap Settings
You can adjust the set speed in small or
Graphic
Gap Distance
Dynamic
large increments. Press the toggle button
Display,
Behavior
upward or downward once to adjust the
Bars Indic-
set speed in small increments. Press and
ated
hold the toggle button upward or
Between
downward to adjust the set speed in large
Vehicles
increments.
1
Closest.
Sport.
The system could apply the brakes to slow
your vehicle to the new set speed. The set
2
Close.
Normal.
speed continuously displays in the
instrument cluster display when the
3
Medium.
Normal.
system is active.
4
Far.
Comfort.
Each time you switch the system on, it
selects the last chosen gap setting.
258
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
English 
