2019-2024 Ford Puma SUV Crash and Breakdown Information User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Crash and Breakdown Information for Your Ford Puma SUV 2019-2024

Towing a TrailerItemDimension DescriptionDimension mm (in)FCenter of tow ball to center of first attachment point.355 (14.0)Center of tow ball to center of second attachmentG703 (27.7)point.1 Excluding: ST Line.2 ST Line.334Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Towing a Trailer
Item
Dimension Description
Dimension mm (in)
F
Center of tow ball to center of first attachment point.
355 (14.0)
Center of tow ball to center of second attachment
G
703 (27.7)
point.
1 Excluding: ST Line.
2 ST Line.
334
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Driving Hints•Do not carry unnecessary weight in yourCOLD WEATHERvehicle as extra weight wastes •Do not add unnecessary accessoriesto the exterior of your vehicle, forThe functional operation of someexample running boards. If you use acomponents and systems can be affectedroof rack, remember to fold it down orat temperatures below approximatelyremove it when not in use.-25°C (-13°F).•Do not shift into neutral when you arebraking or when your vehicle is slowingBREAKING-INdown.•Shut all windows when driving at need to break in new tires for•Switch off all electric systems whenapproximately 480 km (300 mi). Duringnot in use, for example air time, your vehicle may exhibit someMake sure that you unplug anyunusual driving from the auxiliary powerpoints when not in and ClutchAvoid heavy use of the brakes and clutchDRIVING THROUGH SHALLOWif possible for the first 160 km (100 mi) inWATERtown and for the first 1,600 km (1,000 mi)on : Do not attempt toDRIVING ECONOMICALLYcross a deep or flowing body of to follow this instruction couldThe following helps to improve fuelresult in the loss of control of yourconsumption:vehicle, personal injury or death.• Drive smoothly, accelerate gently andanticipate the road ahead to avoidNote: Driving through standing water canheavy vehicle damage.• Regularly check your tire pressures andNote: Engine damage can occur if watermake sure that they are inflated to theenters the air driving through standing water,• Follow the recommended maintenancecheck the depth. Never drive through waterschedule and carry out thethat is higher than the bottom of the frontrecommended area of your vehicle.• Plan your journey and check the trafficbefore you set off. It is more efficientto combine errands into a single tripwhenever possible.• Avoid idling the engine in cold weatheror for
Driving Hints
•
Do not carry unnecessary weight in your
COLD WEATHER
vehicle as extra weight wastes fuel.
PRECAUTIONS
•
Do not add unnecessary accessories
to the exterior of your vehicle, for
The functional operation of some
example running boards. If you use a
components and systems can be affected
roof rack, remember to fold it down or
at temperatures below approximately
remove it when not in use.
-25°C (-13°F).
•
Do not shift into neutral when you are
braking or when your vehicle is slowing
BREAKING-IN
down.
•
Shut all windows when driving at high
Tires
speeds.
You need to break in new tires for
•
Switch off all electric systems when
approximately 480 km (300 mi). During
not in use, for example air conditioning.
this time, your vehicle may exhibit some
Make sure that you unplug any
unusual driving characteristics.
accessories from the auxiliary power
points when not in use.
Brakes and Clutch
Avoid heavy use of the brakes and clutch
DRIVING THROUGH SHALLOW
if possible for the first 160 km (100 mi) in
WATER
town and for the first 1,600 km (1,000 mi)
on freeways.
WARNING: Do not attempt to
DRIVING ECONOMICALLY
cross a deep or flowing body of water.
Failure to follow this instruction could
The following helps to improve fuel
result in the loss of control of your
consumption:
vehicle, personal injury or death.
• Drive smoothly, accelerate gently and
anticipate the road ahead to avoid
Note: Driving through standing water can
heavy braking.
cause vehicle damage.
• Regularly check your tire pressures and
Note: Engine damage can occur if water
make sure that they are inflated to the
enters the air filter.
correct pressure.
Before driving through standing water,
• Follow the recommended maintenance
check the depth. Never drive through water
schedule and carry out the
that is higher than the bottom of the front
recommended checks.
rocker area of your vehicle.
• Plan your journey and check the traffic
before you set off. It is more efficient
to combine errands into a single trip
whenever possible.
• Avoid idling the engine in cold weather
or for extended periods. Start the
engine only when you are ready to set
off.
335
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Driving HintsWARNING: Secure the floor matto both retention devices so that itcannot slip out of position and interferewith the pedals. Failure to follow thisinstruction could result in the loss ofcontrol of your vehicle, personal injury : Do not place additionalfloor mats or any other covering on topof the original floor mats. This couldE266447result in the floor mat interfering with theWhen driving through standing water, driveoperation of the pedals. Failure to followvery slowly and do not stop your instruction could result in the loss ofYour brake performance and traction couldcontrol of your vehicle, personal injury orbe limited. After driving through water soon as it is safe to do so:WARNING: Always make sure that•Lightly press the brake pedal to dry theobjects cannot fall into the driver footbrakes and to check that they while your vehicle is moving. Objects•Turn the steering wheel to check thatthat are loose can become trappedthe steering power assist the pedals causing a loss ofvehicle the function of the following:•Horn•Exterior lightsFLOOR MATSWARNING: Use a floor matdesigned to fit the footwell of yourvehicle that does not obstruct the pedalarea. Failure to follow this instructioncould result in the loss of control of yourvehicle, personal injury or death.E142666To install floor mats that have eyelets,WARNING: Pedals that cannotposition the floor mat eyelet over themove freely can cause loss of vehicleretention post and press down to lock incontrol and increase the risk of seriousposition. Repeat for all eyelets on the floorpersonal remove the floor mats, reverse theinstallation procedure.336Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Driving Hints
WARNING: Secure the floor mat
to both retention devices so that it
cannot slip out of position and interfere
with the pedals. Failure to follow this
instruction could result in the loss of
control of your vehicle, personal injury or
death.
WARNING: Do not place additional
floor mats or any other covering on top
of the original floor mats. This could
E266447
result in the floor mat interfering with the
When driving through standing water, drive
operation of the pedals. Failure to follow
very slowly and do not stop your vehicle.
this instruction could result in the loss of
Your brake performance and traction could
control of your vehicle, personal injury or
be limited. After driving through water and
death.
as soon as it is safe to do so:
WARNING: Always make sure that
•
Lightly press the brake pedal to dry the
objects cannot fall into the driver foot
brakes and to check that they work.
well while your vehicle is moving. Objects
•
Turn the steering wheel to check that
that are loose can become trapped
the steering power assist works.
under the pedals causing a loss of
vehicle control.
Check the function of the following:
•
Horn
•
Exterior lights
FLOOR MATS
WARNING: Use a floor mat
designed to fit the footwell of your
vehicle that does not obstruct the pedal
area. Failure to follow this instruction
could result in the loss of control of your
vehicle, personal injury or death.
E142666
To install floor mats that have eyelets,
WARNING: Pedals that cannot
position the floor mat eyelet over the
move freely can cause loss of vehicle
retention post and press down to lock in
control and increase the risk of serious
position. Repeat for all eyelets on the floor
personal injury.
mat.
To remove the floor mats, reverse the
installation procedure.
336
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Driving HintsNote: Regularly check the floor mats tomake sure they are secure.337Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Driving Hints
Note: Regularly check the floor mats to
make sure they are secure.
337
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Crash and Breakdown InformationSWITCHING THE HAZARDFLASHERS ON AND OFFWARNING: Use only adequatelysized cables with insulated hazard flasher button is onWARNING: Make sure that theE75790the instrument panel. Press thecables are clear of any moving parts andbutton to switch the hazardfuel delivery system on if your vehicle is creating asafety hazard for other road : Connect batteries withWhen you switch the hazard flashers on,only the same nominal front and rear direction indicators : If the engine is runningNote: The hazard flashers operate whenwhile the hood is open, stay clear ofthe ignition is in any position, or if the key ismoving engine components. Failure tonot in the ignition. The battery loses chargefollow this warning could result in seriousand could have insufficient power to restartpersonal injury or the button again to switch them not attempt to push-start an automatictransmission vehicle. This could causeJUMP STARTING THE VEHICLEtransmission not disconnect the battery of thedisabled vehicle. This could damage yourJUMP STARTING PRECAUTIONSvehicle's electrical THE VEHICLEWARNING: Batteries normallyproduce explosive gases which canUse only a 12 volt supply to start yourcause personal injury. Therefore, do flames, sparks or lightedsubstances to come near the the booster vehicle close to the hoodWhen working near the battery, alwaysof the disabled vehicle, making sure theshield your face and protect your vehicles do not provide correct STARTING THE VEHICLEWARNING: Keep batteries out ofreach of children. Batteries containsulfuric acid. Avoid contact with skin,eyes or clothing. Shield your eyes whenWARNING: Make sure that theworking near the battery to protectcables are clear of any moving parts andagainst possible splashing of acidfuel delivery system . In
Crash and Breakdown Information
SWITCHING THE HAZARD
FLASHERS ON AND OFF
WARNING: Use only adequately
sized cables with insulated clamps.
The hazard flasher button is on
WARNING: Make sure that the
E75790
the instrument panel. Press the
cables are clear of any moving parts and
button to switch the hazard
fuel delivery system parts.
flashers on if your vehicle is creating a
safety hazard for other road users.
WARNING: Connect batteries with
When you switch the hazard flashers on,
only the same nominal voltage.
all front and rear direction indicators flash.
WARNING: If the engine is running
Note: The hazard flashers operate when
while the hood is open, stay clear of
the ignition is in any position, or if the key is
moving engine components. Failure to
not in the ignition. The battery loses charge
follow this warning could result in serious
and could have insufficient power to restart
personal injury or death.
your vehicle.
Press the button again to switch them off.
Do not attempt to push-start an automatic
transmission vehicle. This could cause
JUMP STARTING THE VEHICLE
transmission damage.
Do not disconnect the battery of the
disabled vehicle. This could damage your
JUMP STARTING PRECAUTIONS
vehicle's electrical system.
PREPARING THE VEHICLE
WARNING: Batteries normally
produce explosive gases which can
Use only a 12 volt supply to start your
cause personal injury. Therefore, do not
vehicle.
allow flames, sparks or lighted
substances to come near the battery.
Park the booster vehicle close to the hood
When working near the battery, always
of the disabled vehicle, making sure the
shield your face and protect your eyes.
two vehicles do not touch.
Always provide correct ventilation.
JUMP STARTING THE VEHICLE
WARNING: Keep batteries out of
reach of children. Batteries contain
sulfuric acid. Avoid contact with skin,
eyes or clothing. Shield your eyes when
WARNING: Make sure that the
working near the battery to protect
cables are clear of any moving parts and
against possible splashing of acid
fuel delivery system parts.
solution. In case of acid contact with skin
or eyes, flush immediately with water for
Note: In the illustration, the bottom vehicle
a minimum of 15 minutes and get prompt
represents the booster vehicle.
medical attention. If acid is swallowed,
call a physician immediately.
338
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Crash and Breakdown Information1E270780345. Start the engine of the booster vehicleand press the accelerator gently to2keep the engine speed between 2000and 3000 RPM.6. Start the engine of the disabled vehicle.7. Once the disabled vehicle has beenstarted, run both vehicle engines for anadditional three minutes beforedisconnecting the jumper the jumper cables in the reverseorder that they were connected.E142664Note: Do not switch the headlamps onSwitch off the engine and any electricalwhen disconnecting the cables. The could blow the bulbs.1.Connect the positive jumper cable tothe positive terminal of the dischargedPOST-CRASH ALERT SYSTEMbattery.2. Connect the other end of the positiveWHAT IS THE POST-CRASHjumper cable to the positive terminalALERT SYSTEMof the assisting battery.3. Connect the negative jumper cable toThe system helps draw attention to yourthe negative terminal of the assistingvehicle in the event of a serious .4. Make the final connection of theHOW DOES THE POST-CRASHnegative jumper cable to an exposedALERT SYSTEM WORKmetal part of the stalled vehicle'sengine, or connect the negative cableThe system is designed to turn the hazardto a ground connection point ifflashers on, turn the courtesy lamps on, sound the horn and unlockall doors in the event of a serious impactthat deploys an airbag or the seatbeltpretensioners.339Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Crash and Breakdown Information
1
E270780
3
4
5. Start the engine of the booster vehicle
and press the accelerator gently to
2
keep the engine speed between 2000
and 3000 RPM.
6. Start the engine of the disabled vehicle.
7. Once the disabled vehicle has been
started, run both vehicle engines for an
additional three minutes before
disconnecting the jumper cables.
Remove the jumper cables in the reverse
order that they were connected.
E142664
Note: Do not switch the headlamps on
Switch off the engine and any electrical
when disconnecting the cables. The peak
equipment.
voltage could blow the bulbs.
1.
Connect the positive jumper cable to
the positive terminal of the discharged
POST-CRASH ALERT SYSTEM
battery.
2. Connect the other end of the positive
WHAT IS THE POST-CRASH
jumper cable to the positive terminal
ALERT SYSTEM
of the assisting battery.
3. Connect the negative jumper cable to
The system helps draw attention to your
the negative terminal of the assisting
vehicle in the event of a serious impact.
battery.
4. Make the final connection of the
HOW DOES THE POST-CRASH
negative jumper cable to an exposed
ALERT SYSTEM WORK
metal part of the stalled vehicle's
engine, or connect the negative cable
The system is designed to turn the hazard
to a ground connection point if
flashers on, turn the courtesy lamps on,
available.
intermittently sound the horn and unlock
all doors in the event of a serious impact
that deploys an airbag or the seatbelt
pretensioners.
339
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Popular Owner Manuals