2019-2024 Ford Puma SUV Exterior Lighting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Exterior Lighting for Your Ford Puma SUV 2019-2024

Exterior LightingEXTERIOR LIGHTINGHEADLAMPSCONTROLUSING THE HIGH BEAMHEADLAMPSBCADE328253Push the lever away from you toE67019switch the high beams the lever forward again or pull theE245649lever toward you to switch the high pull the lever toward you andBParking lamps, instrument panelrelease it to flash the and license plate : Continuous activation only . See What AreAutolamps (page 98).SWITCHING HEADLAMP EXITDELAY ON AND OFFRotate the control to make a switch headlamp exit delay on, pull theturn signal lever toward you after switchingyour vehicle switch headlamp exit delay off, pull theturn signal lever toward you again or switchyour vehicle : The headlamps turn off after threeminutes with any door open or 30 secondsafter the last door closes.96Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
EXTERIOR LIGHTING
HEADLAMPS
CONTROL
USING THE HIGH BEAM
HEADLAMPS
B
C
A
D
E328253
Push the lever away from you to
E67019
switch the high beams on.
Push the lever forward again or pull the
E245649
lever toward you to switch the high beams
off.
A
Lamps off.
Slightly pull the lever toward you and
B
Parking lamps, instrument panel
release it to flash the headlamps.
lamps and license plate lamps.
Note: Continuous activation only with
C
Headlamps.
headlamps on.
D
Autolamps. See What Are
Autolamps (page 98).
SWITCHING HEADLAMP EXIT
DELAY ON AND OFF
Rotate the control to make a selection.
To switch headlamp exit delay on, pull the
turn signal lever toward you after switching
your vehicle off.
To switch headlamp exit delay off, pull the
turn signal lever toward you again or switch
your vehicle on.
Note: The headlamps turn off after three
minutes with any door open or 30 seconds
after the last door closes.
96
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior LightingADJUSTING THE LEVEL OF THEHEADLAMPS –HEADLAMPSTROUBLESHOOTINGHEADLAMPS – FREQUENTLYASKED QUESTIONSWhy is there condensation in theheadlamps?2•Headlamps have vents to2accommodate normal changes in airpressure. Condensation can be anatural by-product of this design.1When moist air enters the lampassembly through the vents, there is apossibility that condensation can occurwhen the temperature is cold. Whennormal condensation occurs, a fineE132711mist can form on the interior of the1. Press to release the . The fine mist eventually clearsand exits through the vents during2. Rotate the control in accordance withnormal vehicle load to prevent you fromdistracting other road users when theHow much condensation isheadlamps are Press to close the control.•The presence of a fine mist, forexample no streaks, drip marks or largeHEADLAMP INDICATORSdroplets. A fine mist covers less than50% of the on IndicatorHow long does it take for theIt illuminates when you switchacceptable condensation to clear?E71341the headlamp low beam or theside and rear lamps on.•Clearing time can take as long as 48hours under dry weather High BeamHow much condensation isIt illuminates when you switchunacceptable?E67019the headlamp high beam on.•A water puddle inside the , drip marks or large dropletsHeadlamp Low Beam Warningpresent on the interior of the should I do if unacceptableIf it illuminates when thecondensation is present?headlamp low beam is on, thisE250683indicates that a headlamp low•Have your vehicle checked as soon asbeam has .97Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
ADJUSTING THE LEVEL OF THE
HEADLAMPS –
HEADLAMPS
TROUBLESHOOTING
HEADLAMPS – FREQUENTLY
ASKED QUESTIONS
Why is there condensation in the
headlamps?
2
•
Headlamps have vents to
2
accommodate normal changes in air
pressure. Condensation can be a
natural by-product of this design.
1
When moist air enters the lamp
assembly through the vents, there is a
possibility that condensation can occur
when the temperature is cold. When
normal condensation occurs, a fine
E132711
mist can form on the interior of the
1. Press to release the control.
lens. The fine mist eventually clears
and exits through the vents during
2. Rotate the control in accordance with
normal operation.
your vehicle load to prevent you from
distracting other road users when the
How much condensation is
headlamps are on.
acceptable?
3. Press to close the control.
•
The presence of a fine mist, for
example no streaks, drip marks or large
HEADLAMP INDICATORS
droplets. A fine mist covers less than
50% of the lens.
Lamps on Indicator
How long does it take for the
It illuminates when you switch
acceptable condensation to clear?
E71341
the headlamp low beam or the
side and rear lamps on.
•
Clearing time can take as long as 48
hours under dry weather conditions.
Headlamp High Beam
How much condensation is
It illuminates when you switch
unacceptable?
E67019
the headlamp high beam on.
•
A water puddle inside the lamp.
Streaks, drip marks or large droplets
Headlamp Low Beam Warning
present on the interior of the lens.
Lamp
What should I do if unacceptable
If it illuminates when the
condensation is present?
headlamp low beam is on, this
E250683
indicates that a headlamp low
•
Have your vehicle checked as soon as
beam has failed.
possible.
97
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior LightingWhy do my headlamps turn offAUTOLAMP SETTINGS - VEHICLESwhen I have them switched onWITH: 12.3 INCH INSTRUMENTwhen I switch my vehicle off?CLUSTER DISPLAY SCREEN/SYNC 2.5•The battery saver turns the headlampsoff after a short period of time after the menu button on the steeringswitch your vehicle to enter the instrument clusterdisplay main Settings.3.Select ARE Lighting.5.Select Headlamp delay.6.Select a setting and press the OKWARNING: The system does you of your responsibility to drivewith due care and attention. You mayAUTOLAMP SETTINGS - VEHICLESneed to override the system if it does notWITH: SYNC 3turn the headlamps on in low visibilityconditions, for example daytime fog.1.Press Settings on the turn the headlamps on in situations or when the operate.4.Press Headlamp SETTINGS - a : 4.2 INCH INSTRUMENTCLUSTER DISPLAY SCREEN/EXTERIOR LAMPSSYNC 2.51.Using the instrument cluster displayUSING THE TURN SIGNAL LAMPScontrols on the steering wheel, selectSettings.2.Select Vehicle settings.3.Select Lighting.4.Select Headlamp delay.5.Select a setting and press the OKbutton.E24267698Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
Why do my headlamps turn off
AUTOLAMP SETTINGS - VEHICLES
when I have them switched on
WITH: 12.3 INCH INSTRUMENT
when I switch my vehicle off?
CLUSTER DISPLAY SCREEN/
SYNC 2.5
•
The battery saver turns the headlamps
off after a short period of time after you
1.
Press the menu button on the steering
switch your vehicle off.
wheel to enter the instrument cluster
display main menu.
AUTOLAMPS
2.
Select Settings.
3.
Select Vehicle.
WHAT ARE AUTOLAMPS
4.
Select Lighting.
5.
Select Headlamp delay.
6.
Select a setting and press the OK
WARNING: The system does not
button.
relieve you of your responsibility to drive
with due care and attention. You may
AUTOLAMP SETTINGS - VEHICLES
need to override the system if it does not
WITH: SYNC 3
turn the headlamps on in low visibility
conditions, for example daytime fog.
1.
Press Settings on the touchscreen.
Autolamps turn the headlamps on in low
2.
Press Vehicle.
light situations or when the windshield
3.
Press Lighting.
wipers operate.
4.
Press Headlamp Delay.
AUTOLAMP SETTINGS - VEHICLES
5.
Select a setting.
WITH: 4.2 INCH INSTRUMENT
CLUSTER DISPLAY SCREEN/
EXTERIOR LAMPS
SYNC 2.5
1.
Using the instrument cluster display
USING THE TURN SIGNAL LAMPS
controls on the steering wheel, select
Settings.
2.
Select Vehicle settings.
3.
Select Lighting.
4.
Select Headlamp delay.
5.
Select a setting and press the OK
button.
E242676
98
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior LightingPush the lever up or down to2. Push the lever up or down to switch theE67018switch the turn signal lamps marker lamps the Side Marker LampsSet the lever to the middle position toOffswitch the turn signal lamps marker lamps turn off if any of theNote: Tap the lever up or down to make thefollowing occur:turn signal lamps flash three times.• You switch all the lamps Signal Lamp Indicator• You switch the ignition flashes when you switch theE67018turn signal lamps DO CORNERING LAMPSWORKNote: An increase in the rate of flashingwarns of a failed turn signal cornering lamps illuminate the insideof a corner when you are turning theSWITCHING THE PARKING LAMPSsteering wheel or when you switch the turnON AND OFFsignal lamps on. They turn on when thevehicle speed is below 40 km/h (25 mph).Switching the Side Marker LampsNote: Only the cornering lamp on the sideOnyour vehicle is turning SidesNote: Cornering lamps do not operate ifyou switch the front fog lamps on.1. Switch the ignition off.2. Set the lighting control to the parkinglamps : Parking lamps could turn off toprevent the vehicle battery from running outof the ignition off.E24267699Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
Push the lever up or down to
2. Push the lever up or down to switch the
E67018
switch the turn signal lamps on.
side marker lamps on.
Switching the Side Marker Lamps
Set the lever to the middle position to
Off
switch the turn signal lamps off.
Side marker lamps turn off if any of the
Note: Tap the lever up or down to make the
following occur:
turn signal lamps flash three times.
• You switch all the lamps off.
Turn Signal Lamp Indicator
• You switch the ignition on.
It flashes when you switch the
E67018
turn signal lamps on.
HOW DO CORNERING LAMPS
WORK
Note: An increase in the rate of flashing
warns of a failed turn signal lamp.
The cornering lamps illuminate the inside
of a corner when you are turning the
SWITCHING THE PARKING LAMPS
steering wheel or when you switch the turn
ON AND OFF
signal lamps on. They turn on when the
vehicle speed is below 40 km/h (25 mph).
Switching the Side Marker Lamps
Note: Only the cornering lamp on the side
On
your vehicle is turning illuminates.
Both Sides
Note: Cornering lamps do not operate if
you switch the front fog lamps on.
1. Switch the ignition off.
2. Set the lighting control to the parking
lamps position.
Note: Parking lamps could turn off to
prevent the vehicle battery from running out
of charge.
One Side
1.
Switch the ignition off.
E242676
99
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Exterior Lighting Control Headlamps Autolamps Automatic High Beam Control

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot