2019-2024 Ford Puma SUV Exterior Lighting -> Automatic High Beam Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Exterior Lighting -> Automatic High Beam Control for Your Ford Puma SUV 2019-2024

Exterior LightingTurn Signal Lamp IndicatorIt flashes when you switch theE67018turn signal lamps : An increase in the rate of flashingwarns of a failed turn signal LAMPS ON AUDIBLEWARNINGSounds when you open the driver door andthe exterior lamps are HIGH BEAMCONTROLHOW DOES AUTOMATIC HIGHBEAM CONTROL WORKAutomatic high beam control turns thehigh beams on if it is dark enough and noother traffic is present. If it detects anapproaching vehicle’s headlamps or taillamps, or street lighting ahead, the systemturns the high beams off.A camera sensor, centrally mountedbehind the windshield of your vehicle,E327596continuously monitors conditions to turnthe high beams on and automatic high automatic high HIGH BEAMCONTROL PRECAUTIONSWARNING: The system does notrelieve you of your responsibility to drivewith due care and attention. You mayneed to override the system if it does notturn the high beams on or off.101Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
Turn Signal Lamp Indicator
It flashes when you switch the
E67018
turn signal lamps on.
Note: An increase in the rate of flashing
warns of a failed turn signal lamp.
EXTERIOR LAMPS ON AUDIBLE
WARNING
Sounds when you open the driver door and
the exterior lamps are on.
AUTOMATIC HIGH BEAM
CONTROL
HOW DOES AUTOMATIC HIGH
BEAM CONTROL WORK
Automatic high beam control turns the
high beams on if it is dark enough and no
other traffic is present. If it detects an
approaching vehicle’s headlamps or tail
lamps, or street lighting ahead, the system
turns the high beams off.
A camera sensor, centrally mounted
behind the windshield of your vehicle,
E327596
continuously monitors conditions to turn
the high beams on and off.
A
Without automatic high beam
control.
B
With automatic high beam
control.
AUTOMATIC HIGH BEAM
CONTROL PRECAUTIONS
WARNING: The system does not
relieve you of your responsibility to drive
with due care and attention. You may
need to override the system if it does not
turn the high beams on or off.
101
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting•The system detects an approachingvehicle's headlamps or a leadingWARNING: The system may notvehicle's tail the high beams off if the lights of•The system detects severe rain, snowoncoming vehicles are hidden byor , for example guard rails.•The system detects street : You may need to•The camera has reduced the system when approaching•The vehicle speed falls belowother road 30 km/h (19 mph).WARNING: In situations with poorvisibility, such as fog, heavy rain or otherSWITCHING AUTOMATIC HIGHinclement weather, you may need toBEAM CONTROL ON AND OFF -override or completely switch off theVEHICLES WITH: 4.2 CLUSTER DISPLAYSCREEN/SYNC 2.5AUTOMATIC HIGH the instrument cluster displayCONTROL REQUIREMENTScontrols on the steering wheel, system turns the high beams on if all2. Select Vehicle the following occur:3. Select Lighting.• You switch the system on.• You set the lighting control to the4. Switch Auto highbeam on or position.• The ambient light level is low enoughSWITCHING AUTOMATIC HIGHthat you require high CONTROL ON AND OFF -VEHICLES WITH: 12.3 INCH• There is no traffic in front of yourINSTRUMENT CLUSTER 2.5• The vehicle speed is greater thanapproximately 40 km/h (25 mph).1.Press the menu button on the steeringwheel to enter the instrument clusterAUTOMATIC HIGH BEAMdisplay main LIMITATIONS2. Select Settings.3. Select system turns the high beams off if anyof the following occur:4. Select Lighting.• You switch the system off.5. Switch Auto highbeam on or off.• You set the lighting control to anyposition except AUTOMATIC HIGHBEAM CONTROL ON AND OFF -• You switch the rear fog lamps WITH: SYNC 3• The ambient light level is high enoughthat you do not require high beams.1. Press Settings on the touchscreen.2.
Exterior Lighting
•
The system detects an approaching
vehicle's headlamps or a leading
WARNING: The system may not
vehicle's tail lamps.
switch the high beams off if the lights of
•
The system detects severe rain, snow
oncoming vehicles are hidden by
or fog.
obstacles, for example guard rails.
•
The system detects street lighting.
WARNING: You may need to
•
The camera has reduced visibility.
override the system when approaching
•
The vehicle speed falls below
other road users.
approximately 30 km/h (19 mph).
WARNING: In situations with poor
visibility, such as fog, heavy rain or other
SWITCHING AUTOMATIC HIGH
inclement weather, you may need to
BEAM CONTROL ON AND OFF -
override or completely switch off the
VEHICLES WITH: 4.2 INCH
system.
INSTRUMENT CLUSTER DISPLAY
SCREEN/SYNC 2.5
AUTOMATIC HIGH BEAM
1.
Using the instrument cluster display
CONTROL REQUIREMENTS
controls on the steering wheel, select
Settings.
The system turns the high beams on if all
2. Select Vehicle settings.
of the following occur:
3. Select Lighting.
• You switch the system on.
• You set the lighting control to the
4. Switch Auto highbeam on or off.
autolamps position.
• The ambient light level is low enough
SWITCHING AUTOMATIC HIGH
that you require high beams.
BEAM CONTROL ON AND OFF -
VEHICLES WITH: 12.3 INCH
• There is no traffic in front of your
INSTRUMENT CLUSTER DISPLAY
vehicle.
SCREEN/SYNC 2.5
• The vehicle speed is greater than
approximately 40 km/h (25 mph).
1.
Press the menu button on the steering
wheel to enter the instrument cluster
AUTOMATIC HIGH BEAM
display main menu.
CONTROL LIMITATIONS
2. Select Settings.
3. Select Vehicle.
The system turns the high beams off if any
of the following occur:
4. Select Lighting.
• You switch the system off.
5. Switch Auto highbeam on or off.
• You set the lighting control to any
position except autolamps.
SWITCHING AUTOMATIC HIGH
BEAM CONTROL ON AND OFF -
• You switch the rear fog lamps on.
VEHICLES WITH: SYNC 3
• The ambient light level is high enough
that you do not require high beams.
1. Press Settings on the touchscreen.
2. Press Vehicle.
102
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting3. Press AUTOMATIC HIGHBEAM CONTROL4. Switch Auto High Beam on or HIGH BEAMCONTROL INDICATORSIlluminates to confirm when theE146105system is ready to assist.E248603Push the lever away from you to switchbetween high beam and low HIGH BEAM CONTROL – TROUBLESHOOTINGAUTOMATIC HIGH BEAM CONTROL – INFORMATION MESSAGESMessageDetailsFront camera Low visib-The camera has reduced visibility. Clean the windshield. Ifility Clean screenthe message continues to appear, have your vehicle checkedas soon as camera temporarily The camera has malfunctioned. Wait a short period of timenot availablefor the camera to cool down. If the message continues toappear, have your vehicle checked as soon as camera malfunc-The camera has malfunctioned. Have your vehicle checkedtion Service requiredas soon as possible.103Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Exterior Lighting
3. Press Lighting.
OVERRIDING AUTOMATIC HIGH
BEAM CONTROL
4. Switch Auto High Beam on or off.
AUTOMATIC HIGH BEAM
CONTROL INDICATORS
Illuminates to confirm when the
E146105
system is ready to assist.
E248603
Push the lever away from you to switch
between high beam and low beam.
AUTOMATIC HIGH BEAM CONTROL – TROUBLESHOOTING
AUTOMATIC HIGH BEAM CONTROL – INFORMATION MESSAGES
Message
Details
Front camera Low visib-
The camera has reduced visibility. Clean the windshield. If
ility Clean screen
the message continues to appear, have your vehicle checked
as soon as possible.
Front camera temporarily The camera has malfunctioned. Wait a short period of time
not available
for the camera to cool down. If the message continues to
appear, have your vehicle checked as soon as possible.
Front camera malfunc-
The camera has malfunctioned. Have your vehicle checked
tion Service required
as soon as possible.
103
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Exterior Lighting
Exterior Lighting Control Headlamps Autolamps

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot