2019-2024 Ford Puma SUV Wipers and Washers User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Wipers and Washers for Your Ford Puma SUV 2019-2024

Wipers and WashersSWITCHING WINDSHIELD WIPERSWIPERSON AND OFFWIPER PRECAUTIONSFully defrost the windshield before youswitch the windshield wipers sure that you switch the windshieldwipers off before entering a car streaks or smears appear on thewindshield, clean the windshield and thewiper blades. See Checking the WiperBlades (page 92). If that does not resolvethe issue, install new wiper blades. SeeReplacing the Front Wiper Blades (page92). See Replacing the Rear WiperBlades (page 93).Do not operate the wipers on a drywindshield. This may scratch the glass orAdamage the wiper blades. Always use thewindshield washers before wiping a your vehicle speed increases, theASingle between intermittent wipes mayBIntermittent -speed Wipe90Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
SWITCHING WINDSHIELD WIPERS
WIPERS
ON AND OFF
WIPER PRECAUTIONS
Fully defrost the windshield before you
switch the windshield wipers on.
Make sure that you switch the windshield
wipers off before entering a car wash.
If streaks or smears appear on the
windshield, clean the windshield and the
wiper blades. See Checking the Wiper
Blades (page 92). If that does not resolve
the issue, install new wiper blades. See
Replacing the Front Wiper Blades (page
92). See Replacing the Rear Wiper
Blades (page 93).
Do not operate the wipers on a dry
windshield. This may scratch the glass or
A
damage the wiper blades. Always use the
windshield washers before wiping a dry
E248785
windshield.
When your vehicle speed increases, the
A
Single wipe.
interval between intermittent wipes may
B
Intermittent Wipe.
decrease.
C
Normal Wipe.
D
High-speed Wipe
90
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and WashersIntermittent wipeAUTOWIPERS SETTINGS -VEHICLES WITH: 12.3 INCHINSTRUMENT CLUSTER DISPLAYSCREEN/SYNC 2.51.Select Settings.2.Select Vehicle settings.3.Select Wipers.4.Switch Rain sensing on or SETTINGS -VEHICLES WITH: SYNC 3E2423201.Press Settings on the wipe interval.2.Press wipe.3.Press wipe interval.4.Switch Rain Sensing on or the rotary control to adjust theADJUSTING THE SENSITIVITY OFintermittent wipe RAIN SENSORAUTOWIPERSWHAT ARE AUTOWIPERSAutowipers turns on and controls thespeed and frequency of the SETTINGS -VEHICLES WITH: 4.2 INCHINSTRUMENT CLUSTER DISPLAYSCREEN/SYNC 2.5E2423201.Using the instrument cluster displayAHigh on the steering wheel, on.2. Select Vehicle sensitivity.3. Select the rotary control to adjust the4. Switch Rain sensing on or of the autowipers.91Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
Intermittent wipe
AUTOWIPERS SETTINGS -
VEHICLES WITH: 12.3 INCH
INSTRUMENT CLUSTER DISPLAY
SCREEN/SYNC 2.5
1.
Select Settings.
2.
Select Vehicle settings.
3.
Select Wipers.
4.
Switch Rain sensing on or off.
AUTOWIPERS SETTINGS -
VEHICLES WITH: SYNC 3
E242320
1.
Press Settings on the touchscreen.
A
Short wipe interval.
2.
Press Vehicle.
B
Intermittent wipe.
3.
Press Wipers.
C
Long wipe interval.
4.
Switch Rain Sensing on or off.
Use the rotary control to adjust the
ADJUSTING THE SENSITIVITY OF
intermittent wipe interval.
THE RAIN SENSOR
AUTOWIPERS
WHAT ARE AUTOWIPERS
Autowipers turns on and controls the
speed and frequency of the windshield
wipers.
AUTOWIPERS SETTINGS -
VEHICLES WITH: 4.2 INCH
INSTRUMENT CLUSTER DISPLAY
SCREEN/SYNC 2.5
E242320
1.
Using the instrument cluster display
A
High sensitivity.
controls on the steering wheel, select
Settings.
B
Autowipers on.
2. Select Vehicle settings.
C
Low sensitivity.
3. Select Wipers.
Use the rotary control to adjust the
4. Switch Rain sensing on or off.
sensitivity of the autowipers.
91
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and WashersNote: Keep the outside of the windshield4. Select . The rain sensor is very sensitive and5. Switch Reverse wiper on or wipers may operate if dirt, mist orinsects hit the WIPE SETTINGS -VEHICLES WITH: 12.3 INCHSWITCHING THE REARINSTRUMENT CLUSTER DISPLAYWINDOW WIPER ON AND OFFSCREEN/SYNC 2.51.Select Settings.2.Select Vehicle settings.3.Select Wipers.4.Switch Reverse wiper on or WIPE SETTINGS -VEHICLES WITH: SYNC 31.Press Settings on the touchscreen.2.Press Wipers.4.Switch Rear Wiper On (when inAIntermittent ) on or window wiper THE WIPERBLADESREVERSE WIPEWHAT IS REVERSE WIPEReverse wipe turns on the rear windowwiper when you shift into reverse (R) andthe windshield wipers are WIPE SETTINGS -E142463VEHICLES WITH: 4.2 INCHRun the tip of your fingers over the edge ofINSTRUMENT CLUSTER DISPLAYthe blade to check for 2.51.Press the menu button on the steeringREPLACING THE FRONTwheel to enter the instrument clusterWIPER BLADESdisplay main menu.2. Select sure that the ignition is switched off3. Select Vehicle beginning this procedure.92Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
Note: Keep the outside of the windshield
4. Select Wipers.
clean. The rain sensor is very sensitive and
5. Switch Reverse wiper on or off.
the wipers may operate if dirt, mist or
insects hit the windshield.
REVERSE WIPE SETTINGS -
VEHICLES WITH: 12.3 INCH
SWITCHING THE REAR
INSTRUMENT CLUSTER DISPLAY
WINDOW WIPER ON AND OFF
SCREEN/SYNC 2.5
1.
Select Settings.
2.
Select Vehicle settings.
3.
Select Wipers.
4.
Switch Reverse wiper on or off.
REVERSE WIPE SETTINGS -
VEHICLES WITH: SYNC 3
1.
Press Settings on the touchscreen.
2.
Press Vehicle.
E242324
3.
Press Wipers.
4.
Switch Rear Wiper On (when in
A
Intermittent wipe.
Reverse) on or off.
B
Continuous wipe.
C
Rear window wiper off.
CHECKING THE WIPER
BLADES
REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window
wiper when you shift into reverse (R) and
the windshield wipers are on.
REVERSE WIPE SETTINGS -
E142463
VEHICLES WITH: 4.2 INCH
Run the tip of your fingers over the edge of
INSTRUMENT CLUSTER DISPLAY
the blade to check for roughness.
SCREEN/SYNC 2.5
1.
Press the menu button on the steering
REPLACING THE FRONT
wheel to enter the instrument cluster
WIPER BLADES
display main menu.
2. Select Settings.
Make sure that the ignition is switched off
3. Select Vehicle settings.
before beginning this procedure.
92
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers1. Fully lift the wiper : Do not hold the wiper blade to lift thewiper arm.E2643742. Press the wiper blade locking button.E1832362. Disengage the wiper blade from thewiper : Make sure that the wiper arm doesnot spring back against the glass when theE264375wiper blade is not attached.3. Remove the wiper blade.3. To install, reverse the removalNote: Make sure that the wiper arm spring back against the glass when theNote: Make sure that the wiper blade lockswiper blade is not place.4. To install, reverse the : Make sure that the wiper blade locksinto PRECAUTIONSREPLACING THE REAR WIPERDo not operate the washers when theBLADESwasher reservoir is empty. This could causethe washer pump to overheat.1. Lift the wiper : Do not hold the wiper blade to lift thewiper arm.93Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
1. Fully lift the wiper arm.
Note: Do not hold the wiper blade to lift the
wiper arm.
E264374
2. Press the wiper blade locking button.
E183236
2. Disengage the wiper blade from the
wiper arm.
Note: Make sure that the wiper arm does
not spring back against the glass when the
E264375
wiper blade is not attached.
3. Remove the wiper blade.
3. To install, reverse the removal
Note: Make sure that the wiper arm does
procedure.
not spring back against the glass when the
Note: Make sure that the wiper blade locks
wiper blade is not attached.
into place.
4. To install, reverse the removal
procedure.
WASHERS
Note: Make sure that the wiper blade locks
into place.
WASHER PRECAUTIONS
REPLACING THE REAR WIPER
Do not operate the washers when the
BLADES
washer reservoir is empty. This could cause
the washer pump to overheat.
1. Lift the wiper arm.
Note: Do not hold the wiper blade to lift the
wiper arm.
93
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and WashersUSING THE WINDSHIELD WASHERSWITCHING THE COURTESY WIPEON AND OFF - VEHICLES WITH:SYNC 31.Press Settings on the touchscreen.2. Press Vehicle.3. Press Wipers.4. Switch Courtesy Wipe on or THE REAR WINDOWWASHERE242323Pull the lever toward you to operate thewindshield : A courtesy wipe occurs a short timeafter the wipers stop to clear any remainingwasher fluid when switched THE COURTESY WIPEON AND OFF - VEHICLES WITH: 4.2E242432INCH INSTRUMENT CLUSTERDISPLAY SCREEN/SYNC 2.5Push the lever away from you to operatethe rear window washer. When you the menu button on the steeringthe lever, the wiper operates for a shortwheel to enter the instrument main : Do not operate the washers washer reservoir is empty. This couldcause the washer pump to overheat.3.Select Vehicle settings.4.Select WASHER Courtesy wipe on or off.1. Remove the washer fluid reservoir THE COURTESY WIPE2. Add washer fluid that meets ourON AND OFF - VEHICLES WITH:specification. See Washer Fluid12.3 INCH INSTRUMENT CLUSTERSpecification (page 417).DISPLAY SCREEN/SYNC 2.53. Install the washer fluid reservoir cap.1.Using the instrument cluster controlsNote: The reservoir supplies the front andon the steering wheel, select washer systems.2. Select Vehicle settings.3. Select Wipers.4. Switch Courtesy wipe on or off.94Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
USING THE WINDSHIELD WASHER
SWITCHING THE COURTESY WIPE
ON AND OFF - VEHICLES WITH:
SYNC 3
1.
Press Settings on the touchscreen.
2. Press Vehicle.
3. Press Wipers.
4. Switch Courtesy Wipe on or off.
USING THE REAR WINDOW
WASHER
E242323
Pull the lever toward you to operate the
windshield washer.
Note: A courtesy wipe occurs a short time
after the wipers stop to clear any remaining
washer fluid when switched on.
SWITCHING THE COURTESY WIPE
ON AND OFF - VEHICLES WITH: 4.2
E242432
INCH INSTRUMENT CLUSTER
DISPLAY SCREEN/SYNC 2.5
Push the lever away from you to operate
the rear window washer. When you release
1.
Press the menu button on the steering
the lever, the wiper operates for a short
wheel to enter the instrument cluster
time.
display main menu.
Note: Do not operate the washers when
2.
Select Settings.
the washer reservoir is empty. This could
cause the washer pump to overheat.
3.
Select Vehicle settings.
4.
Select Wipers.
ADDING WASHER FLUID
5.
Switch Courtesy wipe on or off.
1. Remove the washer fluid reservoir cap.
SWITCHING THE COURTESY WIPE
2. Add washer fluid that meets our
ON AND OFF - VEHICLES WITH:
specification. See Washer Fluid
12.3 INCH INSTRUMENT CLUSTER
Specification (page 417).
DISPLAY SCREEN/SYNC 2.5
3. Install the washer fluid reservoir cap.
1.
Using the instrument cluster controls
Note: The reservoir supplies the front and
on the steering wheel, select Settings.
rear washer systems.
2. Select Vehicle settings.
3. Select Wipers.
4. Switch Courtesy wipe on or off.
94
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and WashersWIPERS AND WASHERS –TROUBLESHOOTINGWIPERS AND WASHERS –WARNING LAMPSIlluminates when the windshieldE132353washer fluid is AND WASHERS –FREQUENTLY ASKED QUESTIONSWhy are there streaks and smearson the windshield?•The wiper blades could be dirty, wornor damaged. Check the wiper Checking the Wiper Blades(page 92). If the wiper blades are dirty,clean them with washer fluid or waterapplied with a soft sponge or cloth. Ifthe wiper blades are worn or damaged,install new ones. See Replacing theFront Wiper Blades (page 92). SeeReplacing the Rear Wiper Blades(page 93).95Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Wipers and Washers
WIPERS AND WASHERS –
TROUBLESHOOTING
WIPERS AND WASHERS –
WARNING LAMPS
Illuminates when the windshield
E132353
washer fluid is low.
WIPERS AND WASHERS –
FREQUENTLY ASKED QUESTIONS
Why are there streaks and smears
on the windshield?
•
The wiper blades could be dirty, worn
or damaged. Check the wiper blades.
See Checking the Wiper Blades
(page 92). If the wiper blades are dirty,
clean them with washer fluid or water
applied with a soft sponge or cloth. If
the wiper blades are worn or damaged,
install new ones. See Replacing the
Front Wiper Blades (page 92). See
Replacing the Rear Wiper Blades
(page 93).
95
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Wipers Autowipers Washers

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot