Wipers and Washers
USING THE WINDSHIELD WASHER
SWITCHING THE COURTESY WIPE
ON AND OFF - VEHICLES WITH:
SYNC 3
1.
Press Settings on the touchscreen.
2. Press Vehicle.
3. Press Wipers.
4. Switch Courtesy Wipe on or off.
USING THE REAR WINDOW
WASHER
E242323
Pull the lever toward you to operate the
windshield washer.
Note: A courtesy wipe occurs a short time
after the wipers stop to clear any remaining
washer fluid when switched on.
SWITCHING THE COURTESY WIPE
ON AND OFF - VEHICLES WITH: 4.2
E242432
INCH INSTRUMENT CLUSTER
DISPLAY SCREEN/SYNC 2.5
Push the lever away from you to operate
the rear window washer. When you release
1.
Press the menu button on the steering
the lever, the wiper operates for a short
wheel to enter the instrument cluster
time.
display main menu.
Note: Do not operate the washers when
2.
Select Settings.
the washer reservoir is empty. This could
cause the washer pump to overheat.
3.
Select Vehicle settings.
4.
Select Wipers.
ADDING WASHER FLUID
5.
Switch Courtesy wipe on or off.
1. Remove the washer fluid reservoir cap.
SWITCHING THE COURTESY WIPE
2. Add washer fluid that meets our
ON AND OFF - VEHICLES WITH:
specification. See Washer Fluid
12.3 INCH INSTRUMENT CLUSTER
Specification (page 417).
DISPLAY SCREEN/SYNC 2.5
3. Install the washer fluid reservoir cap.
1.
Using the instrument cluster controls
Note: The reservoir supplies the front and
on the steering wheel, select Settings.
rear washer systems.
2. Select Vehicle settings.
3. Select Wipers.
4. Switch Courtesy wipe on or off.
94
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
English 
