2023-2026 Honda Civic 4 Door Instrument Panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument Panel for Your Honda Civic 4 Door Eleventh Generation (2023-2026)

Instrument Panel  
This chapter describes the buttons, indicators, and gauges that are used while driving.  
Indicators ............................................ 96  
Gauges and Driver Information Interface  
Gauges............................................ 118  
Driver Information Interface (A-type  
Meter) ........................................125  
Driver Information Interface Left Side Area  
(B-type-Meter) ............................... 148  
Driver Information Interface Right Side  
Area (B-type-Meter) ....................... 154  
95  
Indicators  
Indicators come on/blink depending on the condition of the vehicle. Messages may  
display on the driver information interface at the same time. Please take the  
appropriate action outlined in the message, such as contacting a dealer.  
*1  
*1  
P. 101  
P. 101  
Charging System Indicator  
Shift Position Indicator*  
P. 103  
P. 103  
Low Fuel Indicator  
U.S.  
Parking Brake and Brake  
System Indicator (Red)  
P. 98  
*1  
Canada  
Anti-lock Brake System  
(ABS) Indicator  
*1  
*1  
M (7-speed manual shift  
mode) Indicator/Shift  
Indicator*  
P. 101  
P. 102  
Parking Brake and Brake  
System Indicator (Amber)  
U.S.  
P. 100  
P. 100  
P. 100  
P. 101  
*1  
Supplemental Restraint  
System Indicator  
*1  
P. 104  
P. 104  
P. 104  
P. 105  
Canada  
Transmission System  
Indicator*  
*1  
Automatic Brake Hold  
System Indicator  
Electric Power Steering  
(EPS) System Indicator  
*1  
Gear Position Indicator*  
Shift Up Indicator*  
P. 102  
P. 102  
P. 102  
*1  
*1  
U.S.  
Automatic Brake Hold  
Indicator  
Vehicle Stability AssistTM  
(VSA®) System Indicator  
*1  
Shift Down Indicator*  
Canada  
Vehicle Stability AssistTM  
(VSA ) OFF Indicator  
*1  
Malfunction Indicator  
Lamp  
Seat Belt Reminder  
Indicator  
*1  
P. 103  
®
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine  
has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the  
owner's manual.  
* Not available on all models  
96  
uuIndicatorsu  
*1 Low Tire Pressure/TPMS  
Indicator*  
INDIVIDUAL Mode  
Indicator*  
Immobilizer System  
Indicator  
P. 105  
P. 106  
P. 108  
P. 110  
P. 110  
COMFORT Mode Indicator*  
+R Mode Indicator*  
P. 108  
P. 109  
Security System Alarm  
Indicator  
Turn Signal and Hazard  
Warning Indicators  
Adaptive Cruise Control  
(ACC) with Low Speed  
*1  
P. 106  
P. 106  
P. 106  
P. 106  
Lights On Indicator  
High Beam Indicator  
Low Temperature  
Indicator*  
*1  
P. 109  
P. 114  
P. 113  
Follow* Indicator (Amber)  
Cruise Mode Indicator  
(White/Green)  
Adaptive Cruise Control  
(ACC) with Low Speed  
Follow* Indicator  
*1  
P. 113  
Auto High-Beam Indicator  
Adaptive Cruise Control  
(ACC) with Low Speed  
Follow* Interval Indicator*  
(White/Green)  
P. 114  
P. 111  
Fog Light Indicator*  
*1  
Lane Keeping Assist System  
(LKAS) Indicator (Amber)  
P. 114  
P. 114  
Auto Idle Stop OFF  
Indicator*  
P. 107  
P. 108  
System Message Indicator  
Lane Keeping Assist System  
(LKAS) Indicator (White/  
Green)  
*2  
Auto Idle Stop Suspend  
Indicator*  
P. 112  
P. 111  
P. 111  
ECON Mode Indicator*  
*3  
*1  
Safety Support Indicator  
(Amber)  
*1  
Auto Idle Stop System  
Indicator (Amber)*  
P. 115  
P. 117  
NORMAL Mode Indicator*  
SPORT Mode Indicator*  
P. 108  
P. 108  
Auto Idle Stop Indicator  
(Green)*  
Safety Support Indicator  
(Green/Gray)  
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine  
has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the  
owner's manual.  
*2: Models without drive mode switch  
*3: Models with drive mode switch  
* Not available on all models  
Continued  
97  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Comes on when the parking brake is  
applied, and goes off when it is released.  
The beeper sounds and the indicator comes on if  
you drive with the parking brake applied.  
Comes on for about 30 seconds when you apply  
the electric parking brake while the power mode is  
in ACCESSORY or VEHICLE OFF, then goes off.  
Stays on for about 30 seconds when you set the  
power mode to VEHICLE OFF while the electric  
parking brake is applied, then goes off.  
U.S.  
●
Parking Brake and  
Brake System  
Indicator (Red)  
Canada  
(Red)  
• Comes on when the brake fluid level is  
low.  
• Comes on while driving - Make sure the parking  
brake is released. Stop in a safe place and check  
the brake fluid level.  
2 What to do when the indicator comes on  
while driving P. 795  
98  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
1.5 L engine models  
Comes on if there is a problem with the  
brake system.  
●
Comes on along with the Parking Brake and  
Brake System Indicator (amber) - Immediately  
stop in a safe place. Contact a dealer for repair. The  
brake pedal becomes harder to operate. Depress  
the pedal further than you normally do.  
2 If the Brake System Indicator (Red) Comes On  
or Blinks at the Same Time When the Brake  
System Indicator (Amber) Comes On P. 797  
U.S.  
All models  
Parking Brake and  
Brake System  
Indicator (Red)  
●
Comes on along with the ABS indicator - Have  
your vehicle checked by a dealer.  
Canada  
(Red)  
2 If the Brake System Indicator (Red) Comes On  
or Blinks P. 795  
●
Blinks and the Parking Brake and Brake System  
Indicator (amber) comes on at the same time -  
There is a problem with the electric parking brake  
system. The parking brake may not be set.  
Avoid using the parking brake and have your  
vehicle checked by a dealer immediately.  
2 If the Brake System Indicator (Red) Comes On  
or Blinks at the Same Time When the Brake  
System Indicator (Amber) Comes On P. 797  
Continued  
99  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
U.S.  
Comes on if there is a problem with a  
system related to braking other than the  
conventional brake system.  
Comes on while driving - Have your vehicle  
checked by a dealer.  
With this indicator on, your vehicle still has normal  
braking ability.  
Parking Brake and  
Brake System  
Indicator (Amber)  
Canada  
●
Comes on if there is a problem with the  
electric parking brake system and/or the  
automatic brake hold system.  
Stays on constantly - Avoid using the parking  
brake and have your vehicle checked by a dealer  
immediately.  
(Amber)  
●
●
Automatic Brake  
Hold System  
Indicator  
Comes on when the automatic brake hold  
system is on.  
2 Automatic Brake Hold P. 660  
U.S.  
Comes on when the automatic brake hold  
is activated.  
Automatic Brake  
Hold Indicator  
2 Automatic Brake Hold P. 660  
Canada  
100  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
After you have set the power mode to ON,  
the vehicle performs system checks.  
However, if the readiness codes have not  
been set by that time, this indicator will  
blink five times and then go off.  
Readiness codes are part of the on-board  
diagnostics for the emissions control systems.  
2 Testing of Readiness Codes P. 818  
Malfunction  
Indicator Lamp  
●
●
Comes on if there is a problem with the  
emissions control systems.  
Blinks when a misfire in the engine's  
cylinders is detected.  
2 If the Malfunction Indicator Lamp Comes On  
or Blinks P. 794  
●
●
Comes on when there is a problem with  
the charging system.  
Stop in a safe place and contact a dealer  
immediately.  
Charging System  
Indicator  
2 Checking the Battery P. 745  
2 If the Charging System Indicator Comes On  
P. 794  
●
●
Indicates the current shift position.  
Shift Position  
Indicator*  
2 Shifting P. 501, 503  
M (7-speed  
Comes on when the 7-speed manual shift  
mode is applied.  
manual shift mode)  
Indicator/Shift  
Indicator*  
2 7-Speed Manual Shift Mode P. 505  
* Not available on all models  
Continued  
101  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Blinks if the transmission system has a  
problem.  
Have your vehicle checked by a dealer immediately.  
Transmission  
System Indicator*  
●
●
Indicates 1st to 6th gear position and (N  
.
If you shift gears very slowly, a different gear  
position may be displayed for a moment.  
2 Shifting P. 507  
When the power mode is turned on, (N is not  
displayed until it is shifted into (R or 1st to 6th gear  
position.  
1st to 6th gear positions are not displayed when  
the vehicle is stopped.  
The display can be turned ON/OFF in customized  
features in the audio/information screen.  
2 Customized Features P. 390  
Gear Position  
Indicator*  
●
●
●
●
Comes on when shifting up is  
recommended.  
Shift Up Indicator*  
2 Shift Up/Down Indicators P. 509  
2 Shift Up/Down Indicators P. 509  
Shift Down  
Indicator*  
Comes on when shifting down is  
recommended.  
* Not available on all models  
102  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Blinks and the beeper sounds for a few  
seconds if you are not wearing a seat belt  
when you set the power mode to ON, then  
the indicator comes on.  
If the front passenger is not wearing a seat  
belt, the indicator comes on a few seconds  
later.  
Comes on for a while when the rear seat  
belt is unfastened while the power mode in  
ON.  
Blinks while driving if you and/or any  
passenger has not fastened a seat belt. The  
beeper sounds and the indicator blinks at  
regular intervals.  
The beeper stops and the indicator goes off when  
you and the passengers fasten their seat belts.  
Stays on after you and/or the passengers have  
fastened the seat belt(s) - A detection error may  
have occurred in the sensor. Have your vehicle  
checked by a dealer.  
●
●
●
2 Seat Belt Reminder P. 50  
Seat Belt Reminder  
Indicator  
●
●
Comes on when the fuel reserve is running  
low (approximately 1.8 U.S. gal/7.0 Liter  
left).  
Comes on - Refuel your vehicle as soon as possible.  
Low Fuel Indicator  
●
●
●
●
Blinks if there is a problem with the fuel  
gauge.  
Have your vehicle checked by a dealer.  
Comes on if there is a problem with the  
ABS.  
Stays on constantly - Have your vehicle checked  
by a dealer. With this indicator on, your vehicle still  
has normal braking ability but no anti-lock  
function.  
Anti-lock Brake  
System (ABS)  
Indicator  
2 Anti-lock Brake System (ABS) P. 665  
Continued  
103  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Comes on if a problem with any of the  
following is detected:  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Supplemental  
Restraint System  
Indicator  
- Supplemental Restraint System  
- Side airbag system  
- Side curtain airbag system  
- Seat belt tensioner  
• Comes on if there is a problem with the  
EPS system.  
• Stays on constantly - Have your vehicle checked  
by a dealer.  
Electric Power  
Steering (EPS)  
System Indicator  
• Do not drive displays on the driver  
information interface - Immediately stop in a  
safe place and contact a dealer.  
2 If the Electric Power Steering (EPS) System  
Indicator Comes On P. 796  
●
Blinks when VSA® is active.  
—
●
●
Comes on if there is a problem with the  
Stays on constantly - Have your vehicle checked  
VSA® system, brake assist system, hill start  
assist system, starting assist brake  
function*, or agile handling assist.  
by a dealer.  
2 Vehicle Stability AssistTM (VSA®), aka  
Electronic Stability Control (ESC), System  
P. 533  
Vehicle Stability  
AssistTM (VSA®)  
System Indicator  
2 Hill start assist system P. 496  
●
●
Comes on if the VSA® system is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
* Not available on all models  
104  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
2 VSA® On and Off P. 534  
Comes on when you partially disable VSA®.  
Models without Auto Idle Stop  
●
Comes on when you press and hold the  
(VSA® OFF) button while +R mode is  
selected.  
2 When in +R Drive mode P. 535  
Vehicle Stability  
AssistTM (VSA®)  
OFF Indicator  
●
Models with A-type meter  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
●
Comes on if the VSA® system is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
●
●
●
●
May come on briefly if the power mode is  
set to ON and the vehicle is not moved  
within 45 seconds, to indicate the  
calibration process is not yet complete.  
Comes on and stays on when:  
- One or more tires' pressures are  
determined to be significantly low.  
- The system has not been calibrated.  
Comes on while driving - Stop in a safe place,  
check tire pressures, and inflate the tire(s) if  
necessary.  
Stays on after the tires are inflated to the  
recommended pressures - The system needs to  
be calibrated.  
2 TPMS Calibration P. 539  
Low Tire Pressure/  
TPMS Indicator*  
●
●
Blinks for about one minute, and then stays  
on if there is a problem with the TPMS, or  
when a compact spare tire is temporarily  
installed.  
Blinks and remains on - Have your vehicle  
checked by a dealer. If the vehicle is fitted with a  
compact spare tire, get your regular tire repaired or  
replaced and put back on your vehicle as soon as  
you can.  
●
●
Comes on if the TPMS is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
* Not available on all models  
Continued  
105  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
• Blinks when you operate the turn signal  
lever.  
• Blinks along with all turn signals when you  
press the hazard warning button.  
• Does not blink or blinks rapidly  
2 Replacing Light Bulbs P. 727  
Turn Signal and  
Hazard Warning  
Indicators  
• Comes on when the parking, tail, and  
other external lights are on.  
2 Light Switches P. 206  
Lights On Indicator  
• Comes on when the high beam headlights  
are on.  
High Beam  
Indicator  
—
• Comes on when all the operating  
conditions of the auto high-beam are met.  
Auto High-Beam  
Indicator  
2 Auto High-Beam P. 210  
2 Fog Lights* P. 209  
• Comes on when the fog lights are on.  
Fog Light  
Indicator*  
* Not available on all models  
106  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
• Comes on along with a beep when a  
problem is detected. A system message on  
the driver information interface appears at  
the same time.  
Refer to the Indicators information in this chapter  
when a system message appears on the driver  
information interface. Take the appropriate action  
for the message.  
Models with A-type meter  
●
While the indicator is on, press the  
(home)  
button, and select Warnings to see the message  
again.  
2 Switching the Display P. 125  
System Message  
Indicator  
●
The driver information interface will not return to  
the normal screen unless the warning is canceled,  
or the  
(home) button is pressed.  
Models with B-type meter  
●
While the indicator is on, roll the right selector  
wheel to see the message again.  
2 Switching the Display P. 155  
●
The driver information interface will not return to  
the normal screen unless the warning is canceled,  
or the right selector wheel is rolled.  
Continued  
107  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Models without drive mode switch  
●
Comes on when the ECON mode is on.  
*1  
2 ECON Button* P. 511  
2 Drive Mode Switch* P. 523, 527  
ECON Mode  
Indicator*  
Models with drive mode switch  
*2  
●
Comes on when you set the drive mode  
to ECON.  
●
●
Comes on when you set the drive mode  
to NORMAL.  
NORMAL Mode  
Indicator*  
2 Drive Mode Switch* P. 523, 527  
Models with A-type meter  
Comes on when you set the drive mode  
to SPORT.  
●
The ambient meter remains lit up in red as long as  
SPORT mode is selected.  
SPORT Mode  
Indicator*  
Models with B-type meter  
The ambient meter* goes off and gauges in the  
instrument panel lit up in red as long as SPORT  
mode is selected.  
●
2 Drive Mode Switch* P. 523, 527  
●
●
Comes on when you set the drive mode  
to INDIVIDUAL.  
INDIVIDUAL  
Mode Indicator*  
2 Drive Mode Switch* P. 527  
2 Drive Mode Switch* P. 527  
Comes on when you set the drive mode  
to COMFORT.  
COMFORT Mode  
Indicator*  
*1:Models without drive mode switch  
*2:Models with drive mode switch  
* Not available on all models  
108  
uuIndicatorsu  
Indicator  
Name  
+R Mode  
On/Blinking  
Explanation  
●
●
Comes on when you set the drive mode to  
+R.  
2 Drive Mode Switch* P. 527  
Indicator*  
●
Comes on when the engine coolant  
temperature is low.  
If the indicator stays on after the engine has  
reached normal operating temperature, there may  
be a problem with the temperature sensors. Have  
your vehicle inspected by a dealer.  
Low Temperature  
Indicator*  
* Not available on all models  
Continued  
109  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
• Blinks if the immobilizer system cannot  
recognize the key information.  
• Blinks - You cannot start the engine. Set the  
power mode to VEHICLE OFF, then select the ON  
mode again.  
Models with  
A-type meter  
Indicator  
Canadian models  
Depress and hold the brake pedal before setting  
the power mode to ON.  
• Repeatedly blinks - The system may be  
malfunctioning. Have your vehicle checked by a  
dealer.  
Immobilizer System  
Indicator  
Models with  
B-type meter  
Indicator  
• Do not attempt to alter this system or add other  
devices to it. Electrical problems can occur.  
• Blinks when the security system alarm has  
been set.  
Models with  
A-type meter  
Indicator  
Security System  
Alarm Indicator  
2 Security System Alarm P. 195  
Models with  
B-type meter  
Indicator  
110  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
Comes on when the Auto Idle Stop system  
has been turned off by the Auto Idle Stop  
OFF button.  
Auto Idle Stop OFF  
Indicator*  
2 Auto Idle Stop System ON/OFF P. 513, 519  
Blinks - Have your vehicle checked by a dealer.  
●
●
●
Blinks if there is a problem with the Auto  
Idle Stop system.  
Auto Idle Stop  
System Indicator  
(Amber)*  
Comes on when Auto Idle Stop is in  
operation. The engine automatically shuts  
off.  
Auto Idle Stop  
Indicator (Green)*  
2 Auto Idle Stop P. 512, 518  
* Not available on all models  
Continued  
111  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
Comes on while Auto Idle Stop is  
temporarily suspended in the following  
situations.  
—
Continuously variable transmission models  
●
Depress the brake pedal firmly.  
- Brake pedal is not fully pressed  
Continuously variable transmission models  
- The transmission is in a position other than  
(D  
- System charging is prioritized  
2 Auto Idle Stop P. 512, 518  
Auto Idle Stop  
Suspend Indicator*  
- Climate control system is prioritized  
- Engine coolant temperature is not in  
operating range  
2 Auto Idle Stop P. 512, 518  
2 Drive Mode Switch* P. 523, 527  
- SPORT mode* is selected.  
- The battery temperature is too low.  
- Auto Idle Stop does not activate for some  
reason.  
2 Auto Idle Stop P. 512, 518  
●
If you press and hold the Auto Idle Stop OFF  
button, you can select whether to display the status  
messages or not.  
—
* Not available on all models  
112  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with ACC  
with Low Speed Follow*.  
Comes on while driving - Have your vehicle  
checked by a dealer.  
Comes on if the ACC with Low Speed  
Follow* is deactivated temporarily after the  
battery has been disconnected, then re-  
connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Indicator (Amber)  
●
●
●
●
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
ACC with Low Speed Follow* has been  
automatically canceled.  
Make sure the total load is within the Maximum  
Load Limit.  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Indicator  
Lights up in white when you press the  
button.  
Lights up in green when you press the RES/  
+/SET/- switch up or down.  
2 Adaptive Cruise Control (ACC) with Low  
Speed Follow* P. 576  
2 Adaptive Cruise Control (ACC)* P. 596  
(White/Green)  
* Not available on all models  
Continued  
113  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with the  
LKAS.  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Lane Keeping  
Assist System  
(LKAS) Indicator  
(Amber)  
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
Make sure the total load is within the Maximum  
Load Limit.  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
●
Lane Keeping  
Assist System  
(LKAS) Indicator  
(White/Green)  
Lights up in white when you press the LKAS  
button.  
Lights up in green when the LKAS is in  
operation.  
2 Lane Keeping Assist System (LKAS) P. 616  
●
●
Lights up in white when you change to  
cruise mode.  
Lights up in green when you have set a  
speed for cruise control.  
Cruise Mode  
Indicator  
(White/Green)  
2 To Switch ACC with Low Speed Follow to  
Cruise Control P. 594  
2 To Switch ACC to Cruise Control P. 614  
●
●
Comes on when Adaptive Cruise Control  
(ACC) with Low Speed Follow* indicator  
comes on.  
Each time you press the interval button, the  
following interval (the interval behind a vehicle  
detected ahead of you) setting cycles through  
Furthest, Far, Mid, and Nearest following  
intervals.  
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Interval Indicator*  
2 To Set or Change Following-interval P. 590  
* Not available on all models  
114  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with Road  
Departure Mitigation system, CMBSTM, Low  
Speed Braking Control* or blind spot  
information system*.  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
Make sure the total load is within the Maximum  
Load Limit.  
Safety Support  
Indicator (Amber)  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
●
Comes on if the Road Departure Mitigation  
system, CMBSTM and Low Speed Braking  
Control* are deactivated temporarily after  
the battery has been disconnected and  
then re-connected.  
Drive a short distance at more than 12 mph (20  
km/h). The indicator should go off. If it does not,  
have your vehicle checked by a dealer.  
* Not available on all models  
Continued  
115  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Comes on when the Road Departure  
Mitigation system and/or CMBSTM shuts  
itself off.  
Stays on - The temperature inside the camera is  
too high.  
Use the climate control system to cool down the  
camera.  
The system activates when the temperature inside  
the camera cools down.  
2 Front Wide View Camera P. 651  
●
●
Stays on - The area around the camera is blocked  
by dirt, mud, etc. Stop your vehicle in a safe place  
and wipe the debris off with a soft cloth.  
Have your vehicle checked by a dealer if the  
indicator and message are still displayed even after  
you have cleaned the area around the camera.  
2 Front Wide View Camera P. 651  
Safety Support  
Indicator (Amber)  
●
It may come on when the ambient conditions are  
dark, such as when driving in a tunnel, or at night,  
dawn, or dusk.  
116  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Models with Low Speed Braking Control  
Remove the obstacle in the vicinity of the sonar  
sensor.  
●
Comes on when mud, snow, or ice  
accumulates in the vicinity of the sonar  
sensor.  
2 Low Speed Braking Control* P. 565, 571  
Models with blind spot information system  
Comes on while driving - Something may be  
interfering with the blind spot information system  
sensor. Check the vicinity of the blind spot  
information system sensor and remove any  
obstacles.  
Safety Support  
Indicator (Amber)  
●
Comes on when mud, snow, or ice  
accumulates in the vicinity of the blind spot  
information system sensor.  
●
Comes on when the temperature of the  
blind spot information system sensor is  
high.  
●
The system will return to normal when the  
temperature cools down.  
2 Blind Spot Information System* P. 545  
●
●
Lights up in green when Road Departure  
Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot  
information system* are on.  
2 Road Departure Mitigation system On and Off  
P. 640  
Lights up in green and gray when Road  
Departure Mitigation system, CMBSTM, Low  
Speed Braking Control*, blind spot  
information system* or any two or three of  
these systems are off.  
Lights up in gray when Road Departure  
Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot  
Safety Support  
Indicator (Green/  
Gray)  
2 Blind Spot Information System On and Off  
P. 547  
2 System On and Off P. 568, 573  
2 CMBSTM On and Off P. 557  
●
information system* are off.  
* Not available on all models  
117  
Gauges and Driver Information Interface  
Gauges  
Gauges include the speedometer, fuel gauge, and other related indicators.  
They are displayed when the power mode is in ON.  
1Speedometer  
Speedometer  
■
Displays your driving speed in mph or km/h.  
You can set the speedometer and the displayed  
measurements to read in either km/h or mph.  
2 Speed/Distance Units P. 137, 169  
2 Settings P. 138  
2 Customized Features P. 390  
U.S. models  
Models with Auto Idle Stop and B-type meter  
If you change the unit from miles and mph to km and  
km/h, the current vehicle speed in mph appears next  
to the digital speedometer.  
U.S. models without Auto Idle Stop  
If you change the unit from miles and mph to km and  
km/h while the gauge design is set to Round or Bar,  
the current vehicle speed in mph appears next to the  
digital speedometer.  
Vehicle Speed in mph  
118  
uuGauges and Driver Information InterfaceuGauges  
1Tachometer  
Tachometer  
■
Shows the number of engine revolutions per minute.  
Models with A-type meter  
The tachometer can be turned on and off using the  
driver information interface.  
2 Settings P. 138  
Even if you have turned off the tachometer on the  
driver information interface, if No content is selected  
on the driver information interface, it will change to a  
tachometer-only display.  
Models without Auto Idle Stop  
The shift up alarm sounds when the tachometer  
reading approaches the red zone.  
You can turn the shift up alarm feature on and off.  
2 Customized Features P. 390  
1Fuel Gauge  
Fuel Gauge  
■
Displays the amount of fuel left in the fuel tank.  
NOTICE  
You should refuel when the reading approaches  
E
.
Running out of fuel can cause the engine to misfire,  
damaging the catalytic converter.  
The actual amount of remaining fuel may differ from  
the fuel gauge reading.  
Models with B-type meter  
1Temperature Gauge  
Temperature Gauge  
■
Displays the temperature of the engine coolant.  
NOTICE  
Driving with the temperature gauge pointer in the  
upper zone can cause serious engine damage. Pull  
safely to the side of the road and allow engine  
temperature to return to normal.  
2 Overheating P. 789  
Continued  
119  
uuGauges and Driver Information InterfaceuGauges  
Models with Auto Idle Stop  
Odometer  
■
Shows the total number of miles or kilometers that your vehicle has accumulated.  
1Outside Temperature  
Outside Temperature  
■
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).  
The temperature sensor is in the front bumper.  
Road heat and exhaust from another vehicle can  
affect the temperature reading when your vehicle  
speed is less than 19 mph (30 km/h).  
■
Adjusting the outside temperature display  
Adjust the temperature reading by up to 5°F or 3°C if the temperature reading  
seems incorrect.  
It may take several minutes for the display to be  
updated after the temperature reading has stabilized.  
You can adjust the temperature reading.  
2 Settings P. 138  
2 Customized Features P. 390  
120  
uuGauges and Driver Information InterfaceuGauges  
Traffic Sign Recognition System  
■
Shows certain detected traffic signs while driving.  
The indicator blinks when the maximum speed of the traffic sign detected by the  
Traffic Sign Recognition System is exceeded.  
2 Traffic Sign Recognition System P. 645  
Models with A-type meter  
Models with B-type meter  
Continued  
121  
uuGauges and Driver Information InterfaceuGauges  
1Current Mode for ACC with Low Speed Follow*, the LKAS, and  
CurrentModeforACCwithLowSpeedFollow*,theLKAS,andTrafficJamAssist*  
Shows the current mode for ACC with Low Speed Follow*, LKAS, and Traffic Jam  
Assist*.  
■
Traffic Jam Assist*  
Models with Auto Idle Stop and B-type meter  
When you set speed for ACC with Low Speed Follow*  
or cruise control, a set speed mark will be displayed  
on the speedometer.  
2 Adaptive Cruise Control (ACC) with Low Speed Follow* P. 576  
2 Adaptive Cruise Control (ACC)* P. 596  
2 Lane Keeping Assist System (LKAS) P. 616  
2 Traffic Jam Assist* P. 628  
Models without Auto Idle Stop  
If the gauge design is set to Round or Bar, when you  
set speed for ACC or cruise control, a set speed mark  
will be displayed on the speedometer.  
Set  
Speed  
* Not available on all models  
122  
uuGauges and Driver Information InterfaceuGauges  
Models with A-type meter  
1Clock  
Clock  
■
Shows the clock.  
You can adjust the time manually and change the  
clock display to show the 12 hour clock or 24 hour  
clock.  
2 Clock P. 174  
1Rev Indicators*  
Rev Indicators*  
■
Light up from outside to center according to engine speed.  
You can turn the rev indicators on and off.  
2 Customized Features P. 390  
* Not available on all models  
Continued  
123  
uuGauges and Driver Information InterfaceuGauges  
Models without Auto Idle Stop  
1Vehicle Information  
Vehicle Information  
■
Up to 6 items can be selected and displayed at once.  
2 Honda LogR* P. 414  
When using the +R gauge, the following vehicle information can be displayed.  
2 Honda LogR* P. 414  
• Water Temp.  
• Oil Temp.  
You can set a limit for Water Temp. and Oil Temp..  
When the limit is reached, the display will turn  
amber.  
• Oil Pressure  
2 Honda LogR* P. 414  
• Ext. Air Temp.  
• Intake Air Temp.  
• Boost Pressure  
• Steering Angle  
• Accel. Ped. Pos.  
• Brake Pressure  
• Clutch Ped. Pos.  
• Yaw Rate  
When the ACC or LKAS are turned on, vehicle  
information is not displayed.  
• Atmos. Pressure  
* Not available on all models  
124  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Driver Information Interface (A-type Meter)  
The driver information interface shows information such as the estimated travelable  
distance and fuel economy of the vehicle. It also displays messages such as warnings  
and other helpful information.  
When a warning message displays, please check the message and contact a dealer  
and have the vehicle inspected if necessary. Please refer to the pages below if the  
Engine oil pressure low or Engine temperature too hot message is displayed.  
2 If the Engine oil pressure low Warning Appears P. 793  
2 Overheating P. 789  
1Switching the Display  
Switching the Display  
■
Press the  
You can add or delete the meter contents.  
2 Customize Display P. 136  
(home) button, then roll the left selector wheel to scroll to the content  
you want to see. Press the left selector wheel to see detailed information.  
Continued  
125  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Range & fuel  
Warnings  
P. 127  
P. 137  
Speed & time  
No content  
P. 129  
P. 137  
Customize  
display  
Driver  
attention  
P. 136  
P. 131  
Seat belts  
Settings  
P. 134  
P. 138  
Left Selector  
Wheel  
(home) Button  
Maintenance  
Safety  
Support  
Roll the left  
selector wheel.  
P. 134  
P. 134  
126  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Range / Fuel / Trip Meter  
■
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Average Fuel Economy  
Range  
Trip Meter A  
Trip Meter B  
Instant Fuel Economy  
Continued  
127  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
Trip meter  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset the trip meter, display it, press the left selector wheel and then select Reset.  
u The trip meter is reset to 0.0.  
1Range  
The driving range displayed is only an estimate and  
■
Range  
Shows the estimated distance you can travel on the remaining fuel. This estimated  
distance is based on the vehicle's current fuel economy.  
may differ to the actual distance the vehicle can  
travel.  
1Average fuel economy  
■
Average fuel economy  
You can change when to reset the average fuel  
economy.  
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
2 Settings P. 138  
■
Instant fuel economy  
Shows the instant fuel economy as a bar graph in mpg or l/100 km.  
128  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Speed/Time/Trip Meter  
■
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Elapsed Time  
Average Speed  
Trip Meter A  
Trip Meter B  
Continued  
129  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
■
Trip meter  
2 Trip meter P. 128  
Average speed  
1Average speed  
Shows the average speed in mph or km/h since Trip A or Trip B was reset.  
You can change when to reset the average speed.  
2 Settings P. 138  
1Elapsed time  
■
Elapsed time  
Shows the time elapsed since Trip A or Trip B was reset.  
You can change when to reset the elapsed time.  
2 Settings P. 138  
130  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Driver Attention Monitor  
Driver Attention Monitor  
■
The Driver Attention Monitor cannot always detect if  
the driver is tired or inattentive.  
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is  
being driven in a manner consistent with drowsy or inattentive driving. If it  
determines that the vehicle is being driven in such a manner, it will display the  
degree of the driver's attention on the driver information interface.  
Regardless of the system's feedback, if you are  
feeling tired, stop in a safe location and rest for as  
long as needed.  
Driver Information  
Interface  
Left Selector  
Wheel  
(home) Button  
When you select Driver attention on the  
driver information interface, bars on it light up  
in white to indicate the degree of the driver's  
attention.  
2 Switching the Display P. 125  
Level  
Continued  
131  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
If two bars light up, the Driver attention  
level low message will appear.  
If one bar lights up, the Driver attention  
level low. Time for a break. message will  
appear, a beep will sound, and the steering  
wheel will vibrate.  
If this message appears, stop in a safe location  
and rest for as long as needed.  
The message will disappear when the left  
selector wheel is pressed or when the system  
has determined that the driver is driving  
normally.  
If the driver does not take a break and the  
monitor continues to detect that the driver is  
very tired, the message will appear again after  
approximately 15 minutes, accompanied by a  
beep and steering wheel vibrations.  
The message does not appear when the  
traveling time is 30 minutes or less.  
132  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
The Driver Attention Monitor resets when:  
• The engine is turned off.  
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.  
■
For the Driver Attention Monitor to function:  
• The vehicle must be traveling above 25 mph (40 km/h).  
• The electric power steering (EPS) system indicator must be off.  
1For the Driver Attention Monitor to function:  
The bars on the driver information interface remain  
grayed out unless the Driver Attention Monitor is  
functioning.  
■
Depending on driving conditions or other factors, the Driver Attention  
Monitor may not function in the following circumstances:  
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.  
2 Lane Keeping Assist System (LKAS) P. 616  
• The condition of the road is poor, e.g., the surface is unpaved or bumpy.  
• It is windy.  
• The driver is frequently operating the vehicle in an assertive manner such as  
changing lanes or accelerating.  
■
Customizing  
You can change the Driver Attention Monitor settings. Select Tactile and audible  
alert, Tactile alert or OFF.  
2 Settings P. 138  
Continued  
133  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Seat Belts  
■
Occurs, under specified conditions, when seat belts are latched or unlatched.  
2 Seat Belt Reminder P. 50  
Maintenance  
Shows the remaining oil life and Maintenance MinderTM.  
■
2 Maintenance MinderTM P. 693  
1Safety Support  
Safety Support  
Indicates the status of the Road Departure Mitigation system, CMBSTM, and blind  
spot information system* such as On, Off, or Failure, by color and letters.  
■
If a system is indicated by the color amber, have your  
vehicle checked by a dealer immediately.  
To turn on or off each system, first rotate the left  
selector wheel to switch displays. From the next  
display you can select which system to turn on or off.  
2 Road Departure Mitigation system On and  
Off P. 640  
The following colors indicate the status of any of the above mentioned systems:  
• Green: The system is on.  
• Gray: The system is off.  
• Amber: There is a problem with the system.  
2 Blind Spot Information System On and Off  
P. 547  
2 CMBSTM On and Off P. 557  
You can also confirm the status of each function by  
the color of the safety support indicator.  
2 Safety Support Indicator (Amber) P. 115  
2 Safety Support Indicator (Green/Gray)  
P. 117  
* Not available on all models  
134  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Area Info for  
CMBSTM  
Road  
Departure  
Mitigation  
System Icon  
and Status  
Info  
Area Info for  
Road  
Blind Spot  
Information  
System Icon  
and Status  
Info*  
Departure  
Mitigation  
System  
Area Info for  
Blind Spot  
Information  
System*  
CMBSTM Icon  
and Status  
Info  
* Not available on all models  
Continued  
135  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Customize Display  
Customize Display  
■
Icons that are gray cannot be removed from the  
home screen.  
You can choose which icons to display on the home screen.  
1. Roll the left selector wheel to scroll to select  
Customize display, then press the left  
selector wheel.  
Continuously variable transmission models  
When you customize settings, shift to (P  
.
Manual transmission models  
2. Roll the left selector wheel.  
When you customize settings, set the parking brake.  
3. Roll the left selector wheel to scroll  
between icons, then press the left selector  
wheel to check or uncheck them.  
136  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Speed/Distance Units  
■
Enables you to show another unit on the  
driver information interface and set the  
displayed measurements to read in either  
miles and mph or km and km/h.  
Press and hold the left selector wheel when  
you select No content on the driver  
information interface. Each time you do this,  
the unit will change from miles and mph to  
km and km/h or vice versa. After this, a  
confirmation screen will appear for a few  
seconds.  
1Warnings  
Warnings  
■
You can check if there are any active warning messages.  
If there are multiple warnings, you can roll the left  
selector wheel to see other warnings.  
Continued  
137  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Settings  
Settings  
■
Use the driver information interface to customize certain features.  
To customize other features, roll the left selector  
wheel.  
2 List of customizable options P. 139  
2 Example of customization settings P. 145  
■
How to customize  
Press the (home) button, then select the Settings screen by rolling the left  
Continuously variable transmission models  
selector wheel while the power mode is in ON, the vehicle is at a complete stop, and  
the shift position is in (P (continuously variable transmission) or the parking brake is  
set (manual transmission). Then, press the left selector wheel.  
When you customize settings, shift to (P  
.
Manual transmission models  
When you customize settings, set the parking brake.  
Driver  
Information  
Interface  
(home) Button  
Left Selector Wheel  
138  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
List of customizable options  
Setup Group Customizable Features  
Description  
Selectable Settings  
TPMS  
calibration*  
—
Calibrates the TPMS.  
Cancel/Calibrate  
Forward collision  
warning distance  
Changes the distance at which CMBSTM alerts.  
Long/Normal*1/Short  
ON/OFF*1  
Causes the system to beep when a vehicle is detected or  
when the vehicle is out of ACC with Low Speed Follow*  
range.  
ACC forward vehicle  
detect beep  
Driver assist  
system setup  
Road departure  
mitigation setting  
Changes the setting for the Road Departure Mitigation  
system.  
Narrow/Normal*1/Wide/  
Warning only  
Lane keeping assist  
suspend beep  
Causes the system to beep when the LKAS is suspended. ON/OFF*1  
Blind spot  
information*  
Audible and visual  
alert*1/Visual alert  
Changes the setting for the blind spot information.  
*1:Default Setting  
* Not available on all models  
Continued  
139  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
ON*1/OFF  
Traffic sign  
recognition system  
display setting  
Turns the traffic sign recognition system on and off.  
Traffic sign  
recognition system  
exceeding speed  
warning  
Turns the traffic sign recognition system over speed  
warning on and off.  
ON*1/OFF  
Speed limit*1/  
Speed limit+3mph/  
Speed limit+5mph/  
Speed limit+10mph  
(When mph is selected)  
Speed limit*1/  
Driver assist  
system setup  
Speed limit warning  
threshold setting  
Changes the setting speed the traffic sign recognition  
system over speed warning is activated.  
Speed limit+5km/h/  
Speed limit+10km/h/  
Speed limit+15km/h  
(When km/h is selected)  
Driver attention  
monitor  
Tactile and audible  
alert*1/ Tactile alert/OFF  
Changes the setting for the driver attention monitor.  
*1:Default Setting  
140  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
English*1/Français/  
Español  
Language selection  
Changes the displayed language.  
-5°F ~ 0°F*1 ~ +5°F  
(U.S.)  
-3°C ~ 0°C*1 ~ +3°C  
(Canada)  
Adjust outside temp.  
display  
Adjusts the temperature reading by a few degrees.  
Changes the setting of how to reset trip meter A,  
average fuel economy A, average speed A, and elapsed  
time A.  
When fully refueled/  
IGN OFF/Manually reset*1  
“Trip A” reset timing  
Changes the setting of how to reset trip meter B,  
average fuel economy B, average speed B, and elapsed  
time B.  
When fully refueled/  
IGN OFF/Manually reset*1  
“Trip B” reset timing  
Adjust alarm volume  
Meter setup  
Changes the alarm volume, such as buzzers, warnings,  
turn signal sound, and so on.  
High/Mid*1/Low  
Fuel efficiency backlight Turns the ambient meter feature on and off.  
ON*1/OFF  
ON*1/OFF  
Rear seat reminder  
Turns the Rear Seat Reminder feature on and off.  
km/h∙km/mph∙miles*1  
(U.S.)  
km/h∙km*1/mph∙miles  
(Canada)  
Speed/distance units  
Selects the trip meter units.  
Selects whether the tachometer is displayed on the  
instrument panel.  
Tachometer  
ON*1/OFF  
*1:Default Setting  
Continued  
141  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Changes which doors unlock when you grab the driver's Driver door only*1/All  
Door unlock mode  
door handle.  
doors  
Keyless access light  
flash  
Causes some exterior lights to flash when you unlock/  
lock the doors.  
ON*1/OFF  
Keyless access  
setup*  
Causes the beeper to sound when you unlock/lock the  
doors.  
Keyless access beep  
ON*1/OFF  
Remote start system  
ON/OFF*  
Turns the remote engine start feature on and off.  
Turns the auto high-beam on and off.  
ON*1/OFF  
Auto high-beam  
ON*1/OFF  
Interior light dimming  
time  
Changes the length of time the interior lights stay on  
after you close the doors.  
60sec/30sec*1/15sec  
Headlight auto off  
Lighting setup timer  
Changes the length of time the exterior lights stay on  
after you close the driver's door.  
60sec/30sec/15sec*1/0sec  
Max/High/Mid*1/Low/Min  
Auto light sensitivity*  
Changes the timing for the headlights to come on.  
Changes the settings for the wiper operation when the  
headlights automatically come on while the headlight  
switch is in the AUTO position.  
Auto headlight ON  
with wiper ON  
ON*1/OFF  
*1:Default Setting  
* Not available on all models  
142  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Continuously variable transmission models  
With vehicle speed*1/Shift from P/OFF  
Changes the setting for when the doors  
automatically lock.  
Auto door lock  
Manual transmission models  
With vehicle speed*1/OFF  
Continuously variable transmission models  
All doors when driver's door opens*1/All  
doors when shifted to Park/All doors  
when ignition switched OFF/OFF  
Changes the setting for when the doors  
automatically unlock.  
Auto door unlock  
Manual transmission models  
All doors when driver's door opens*1/All  
doors when ignition switched OFF/OFF  
Door setup  
Sets up either the driver's door or all  
doors to unlock on the first operation of  
the keyless remote or built-in key.  
Key and remote unlock  
mode  
Driver door*1/All doors  
Changes the settings for the automatic  
locking the doors when you walk away  
from the vehicle while carrying the  
keyless remote.  
Walk away auto lock*  
ON/OFF*1  
Keyless lock answer  
back  
LOCK/UNLOCK- The exterior lights flash.  
LOCK (2nd push)- The beeper sounds.  
ON*1/OFF  
ON*1/OFF  
Keyless remote power  
window control  
Turns remote window control using the  
keyless remote on and off.  
*1:Default Setting  
* Not available on all models  
Continued  
143  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Changes the settings for the lockout  
protection function.  
Door setup  
Lockout prevention*  
ON*1/OFF  
Resets the Maintenance Minder display  
when you have performed the  
maintenance service.  
Maintenance  
reset  
—
—
(Selects Reset Items)  
Cancels customized changes you have  
made or restores them to their default  
setting.  
Default all  
Cancel/Set  
*1:Default Setting  
* Not available on all models  
144  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
Example of customization settings  
The steps for changing the “Trip A” reset timing setting to When fully refueled  
are shown below. The default setting for “Trip A” reset timing is Manually reset.  
1. Press the (home) button to select  
Settings, then press the left selector wheel.  
Continued  
145  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
2. Roll the left selector wheel until Meter  
setup appears on the display.  
3. Press the left selector wheel.  
u Language selection appears first in the  
display.  
4. Roll the left selector wheel until “Trip A”  
reset timing appears on the display, then  
press the left selector wheel.  
u The display switches to the  
customization setup screen, where you  
can select When fully refueled, IGN  
OFF, Manually reset, or Back.  
5. Roll the left selector wheel and select  
When fully refueled, then press the left  
selector wheel.  
u The Selected appears, then the display  
returns to the customization menu  
screen.  
146  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
6. Press the left selector wheel after Back  
appears on the display.  
7. Repeat Step 6 until you return to the  
normal screen.  
147  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Driver Information Interface Left Side Area  
(B-type-Meter)  
Shows the current mode for audio and phone information, etc.  
2 Audio Remote Controls P. 260  
2 Bluetooth® HandsFreeLink® P. 463  
1Clock  
Clock  
■
Shows the clock.  
You can adjust the time manually and change the  
clock display to show the 12 hour clock or 24 hour  
clock.  
2 Clock P. 174  
You can choose whether the clock is displayed on the  
driver information interface.  
2 Customize Display P. 151  
148  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
1Stopwatch*  
Stopwatch*  
■
Measures the lap time, and displays the previously measured times and the fastest  
lap time.  
Be sure to use this measurement function only where  
and when it is safe to do so.  
Lap time is displayed from 00:00.00 to 99:59.99.  
A maximum of 20 lap times can be stored at a time.  
■
Measuring LAP Time  
1. Change the display content on the left side  
area to Stopwatch.  
2 Select the display content on the left  
side area P. 153  
When measuring lap time with Honda LogR, times  
are displayed on the driver information interface.  
2 Honda LogR* P. 414  
2. Press the left selector wheel to display the  
stopwatch menu screen.  
3. Select Lap Timer and press the left selector  
wheel to display the lap time measurement  
screen.  
4. Press the left selector wheel to start  
measurement.  
5. Press the left selector wheel to stop  
measurement.  
u To measure the time per lap, roll the left  
selector wheel at the end of each lap.  
u To return to the stopwatch menu screen,  
press and hold the left selector wheel.  
* Not available on all models  
Continued  
149  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
■
Checking/Clearing history  
To check or clear the history, select History/  
Reset on the stopwatch menu screen and  
press the left selector wheel.  
u To scroll through the lap times, roll the  
left selector wheel.  
u To clear the history, press the left selector  
wheel on the stopwatch history screen  
while the lap time is not being measured,  
then select and press Reset.  
u To return to the stopwatch menu screen,  
press and hold the left selector wheel.  
150  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
1Customize Display  
Customize Display  
■
Continuously variable transmission models  
■
Arrange audio source on the left side area  
You can choose which sources to display on the audio source screen.  
When you customize settings, shift to (P  
.
Manual transmission models  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
When you customize settings, set the parking brake.  
2. Roll the left selector wheel to scroll to select  
Hide/show, then press the left selector  
wheel.  
3. Roll the left selector wheel to scroll  
between audio sources, then press the left  
selector wheel to check or uncheck them.  
Continued  
151  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Models with Auto Idle Stop  
■
Turn the displaying on the left side area on and off  
You can select whether the current audio information and clock appear on the left  
side area.  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
2. Roll the left selector wheel to scroll to select  
Audio & clock, then press the left selector  
wheel.  
3. Roll the left selector wheel to scroll to select  
your desired settings, then press the left  
selector wheel.  
152  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Models without Auto Idle Stop  
■
Select the display content on the left side area  
You can change the display content on the left side area. Select Audio & clock,  
Stopwatch, or OFF.  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
2. Roll the left selector wheel to scroll to select  
Display content, then press the left  
selector wheel.  
3. Roll the left selector wheel to scroll to select  
your desired content, then press the left  
selector wheel.  
153  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Driver Information Interface Right Side Area  
(B-type-Meter)  
The driver information interface shows information such as the estimated travelable  
distance and fuel economy of the vehicle. It also displays messages such as warnings  
and other helpful information.  
When a warning message displays, please check the message and contact a dealer  
and have the vehicle inspected if necessary. Please refer to the pages below if the  
Engine oil pressure low or Engine temperature too hot message is displayed.  
2 If the Engine oil pressure low Warning Appears P. 793  
2 Overheating P. 789  
154  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Switching the Display  
Switching the Display  
■
Roll the right selector wheel to view different types of content.  
You can add or delete the meter contents.  
2 Customize Display P. 170  
Models with Auto Idle Stop  
Range/Fuel/Trip  
Meter  
Speed/Time/  
Trip Meter  
Navigation/Compass  
Driver Attention  
Monitor  
Seat Belts  
P. 160  
P. 166  
P. 157  
P. 159  
P. 161  
Warning Messages  
No Content/  
Unit Change  
Customize Display  
Safety Support  
Maintenance  
P. 171  
P. 170  
P. 167  
P. 166  
P. 169  
Continued  
155  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Models without Auto Idle Stop  
Range/Fuel/  
Odometer/Trip  
Meter  
Speed/Time/  
Odometer/Trip  
Meter  
Navigation/Compass  
Driver Attention  
Monitor  
Turbo Gauge  
P. 160  
P. 164  
P. 161  
P. 157  
P. 159  
Seat Belts  
G-Meter  
Accelerator  
Position/Braking  
Pressure Meter  
Maintenance  
P. 166  
P. 166  
P. 165  
Right Selector Wheel  
P. 164  
Warning Messages  
Customize Display  
No Content/  
Unit Change  
Safety Support  
P. 171  
P. 170  
P. 167  
P. 169  
156  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Range/Fuel/Odometer*/Trip Meter  
Press the right selector wheel to switch trip meter A, trip meter B, and odometer*.  
■
Range  
Instant Fuel Economy  
Average Fuel Economy  
Trip Meter B  
Trip Meter A  
Odometer*  
* Not available on all models  
Continued  
157  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
Odometer*  
Shows the total number of miles or kilometers that your vehicle has accumulated.  
■
Trip meter  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset the trip meter, display it, press and hold the right selector wheel and then  
select Reset.  
u The trip meter is reset to 0.0.  
■
Range  
1Range  
The driving range displayed is only an estimate and  
Shows the estimated distance you can travel on the remaining fuel. This estimated  
distance is based on the vehicle's current fuel economy.  
may differ to the actual distance the vehicle can  
travel.  
■
Average fuel economy  
1Average fuel economy  
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
You can change when to reset the average fuel  
economy.  
2 Customized Features P. 390  
■
Instant fuel economy  
Shows the instant fuel economy as a bar graph in mpg or l/100 km.  
* Not available on all models  
158  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Speed/Time/Odometer*/Trip Meter  
Press the right selector wheel to switch trip meter A, trip meter B, and odometer*.  
■
Elapsed Time  
Average Speed  
Trip Meter B  
Trip Meter A  
Odometer*  
* Not available on all models  
Continued  
159  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
■
■
Odometer*  
2 Odometer* P. 158  
Trip meter  
2 Trip meter P. 158  
Average speed  
1Average speed  
Shows the average speed in mph or km/h since Trip A or Trip B was reset.  
You can change when to reset the average speed.  
2 Customized Features P. 390  
1Elapsed time  
■
Elapsed time  
Shows the time elapsed since Trip A or Trip B was reset.  
You can change when to reset the elapsed time.  
2 Customized Features P. 390  
1Navigation  
Navigation  
■
You can select whether to have the turn-by-turn  
display come on or not during the route guidance.  
2 Customized Features P. 390  
■
Compass  
Shows the compass screen.  
When the compass or turn-by-turn directions are  
displayed, you can control some navigation system  
functions on the driver information interface by  
pressing the right selector wheel.  
■
Turn-by-Turn Directions  
When driving guidance is provided by the navigation system, Apple CarPlay or  
Android Auto, turn-by-turn directions to your destination appear.  
2 Refer to the Navigation System Manual  
2 Refer to the Navigation System Manual  
2 Android AutoTM P. 285  
2 Apple CarPlay P. 346  
Turn-by-turn directions may not be available for all  
apps.  
* Not available on all models  
160  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Driver Attention Monitor  
Driver Attention Monitor  
■
The Driver Attention Monitor cannot always detect if  
the driver is tired or inattentive.  
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is  
being driven in a manner consistent with drowsy or inattentive driving. If it  
determines that the vehicle is being driven in such a manner, it will display the  
degree of the driver's attention on the driver information interface.  
Regardless of the system's feedback, if you are  
feeling tired, stop in a safe location and rest for as  
long as needed.  
Driver Information Interface  
Right Selector  
Wheel  
When you select Driver Attention Monitor on  
the driver information interface, bars on it  
light up in white to indicate the degree of the  
driver's attention.  
2 Switching the Display P. 155  
Level  
Continued  
161  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
If two bars light up, the Driver attention  
level low message will appear.  
If one bar lights up, the Driver attention  
level low. Time for a break. message will  
appear, a beep will sound, and the steering  
wheel will vibrate.  
If this message appears, stop in a safe location  
and rest for as long as needed.  
The message will disappear when the right  
selector wheel is rolled or when the system  
has determined that the driver is driving  
normally.  
If the driver does not take a break and the  
monitor continues to detect that the driver is  
very tired, the message will appear again after  
approximately 15 minutes, accompanied by a  
beep and steering wheel vibrations.  
The message does not appear when the  
traveling time is 30 minutes or less.  
162  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
The Driver Attention Monitor resets when:  
• The engine is turned off.  
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.  
■
For the Driver Attention Monitor to function:  
• The vehicle must be traveling above 25 mph (40 km/h).  
• The electric power steering (EPS) system indicator must be off.  
1For the Driver Attention Monitor to function:  
The bars on the driver information interface remain  
grayed out unless the Driver Attention Monitor is  
functioning.  
■
Depending on driving conditions or other factors, the Driver Attention  
Monitor may not function in the following circumstances:  
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.  
2 Lane Keeping Assist System (LKAS) P. 616  
• The condition of the road is poor, e.g., the surface is unpaved or bumpy.  
• It is windy.  
• The driver is frequently operating the vehicle in an assertive manner such as  
changing lanes or accelerating.  
■
Customizing  
You can change the Driver Attention Monitor settings. Select Tactile And Audible  
Alert, Tactile Alert, or OFF.  
2 Customized Features P. 390  
Continued  
163  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Turbo Gauge*  
■
When the turbo is producing boost, this gauge indicates boost pressure is building.  
Accelerator Position/Braking Pressure Meter*  
■
■
Accelerator Position Meter  
Displays the accelerator position in degrees  
of %.  
■
Braking Pressure Meter  
Displays the brake pressure in psi when the  
brake is applied.  
Accelerator Position Meter  
Braking Pressure Meter  
* Not available on all models  
164  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1G-Meter*  
G-Meter*  
■
Displays the strength (G) and direction of the load that is applied to the vehicle  
during driving.  
You can change the maximum displayed strength  
(G).  
2 Honda LogR* P. 414  
When decelerated while moving forward  
When accelerated while reversing  
Lateral forces of  
the past three  
seconds (white)  
When steering  
to the left  
When steering  
to the right  
Real-time lateral  
force (yellow)  
When accelerated while moving forward  
When decelerated while reversing  
* Not available on all models  
Continued  
165  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Seat Belts  
■
Occurs, under specified conditions, when seat belts are latched or unlatched.  
2 Seat Belt Reminder P. 50  
Maintenance  
Shows the remaining oil life and Maintenance MinderTM.  
■
2 Maintenance MinderTM P. 693  
166  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Safety Support  
Safety Support  
■
If a system is indicated by the color amber, have your  
vehicle checked by a dealer immediately.  
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot information system such as On, Off, or Failure, by  
color and letters.  
To turn on or off each system, first press the right  
selector wheel to switch displays. From the next  
display you can select which system to turn on or off.  
2 Road Departure Mitigation system On and  
Off P. 640  
The following colors indicate the status of any of the above mentioned systems:  
• Green: The system is on.  
• Gray: The system is off.  
2 Blind Spot Information System On and Off  
P. 547  
• Amber: There is a problem with the system.  
2 System On and Off P. 568, 573  
2 CMBSTM On and Off P. 557  
You can also confirm the status of each function by  
the color of the safety support indicator.  
2 Safety Support Indicator (Amber) P. 115  
2 Safety Support Indicator (Green/Gray)  
P. 117  
Models with Low Speed Braking Control  
Even when the Low Speed Braking Control icon is  
green, if the parking sensor is turned off for the rear  
only, the brake assist will not operate when reversing.  
2 Turning off All Rear Sensors P. 674  
* Not available on all models  
Continued  
167  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Area Info for  
Road Departure  
Mitigation  
System  
Road Departure  
Mitigation System  
Icon and Status  
Info  
Area Info for Blind Blind Spot  
Spot Information  
System  
Information System  
Icon and Status Info  
Area Info for the  
Low Speed  
Braking Control*  
Low Speed Braking  
Control Icon and  
Status Info*  
Area Info for  
CMBSTM  
CMBSTM Icon  
and Status Info  
* Not available on all models  
168  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Speed/Distance Units  
■
Enables you to show another unit on the  
driver information interface and set the  
displayed measurements to read in either  
miles and mph or km and km/h.  
Models with Auto Idle Stop  
Press and hold the right selector wheel when  
you select the Blank/Unit change screen on  
the driver information interface. Each time you  
do this, the unit will change from miles and  
mph to km and km/h or vice versa. After this,  
a confirmation screen will appear for a few  
seconds.  
Models without Auto Idle Stop  
Continued  
169  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Arrange content on the right side area  
Customize Display  
■
Contents that are gray cannot be removed from the  
right side area.  
■
Arrange content on the right side area  
You can choose which contents to display on the right side area.  
1. Press the right selector wheel when you  
Continuously variable transmission models  
When you customize settings, shift to (P  
.
select the Customize display on the driver  
information interface.  
Manual transmission models  
When you customize settings, set the parking brake.  
2. Roll the right selector wheel to scroll to  
select Hide/show, then press the right  
selector wheel.  
3. Roll the right selector wheel to scroll  
between contents, then press the right  
selector wheel to check or uncheck them.  
170  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
Change gauge design  
You can change the gauge design to a round or bar design.  
1. Press the right selector wheel when you  
1Change gauge design  
When using the Round minimal or Bar minimal  
gauge design, a simplified display is used when ACC  
with Low Speed Follow* is in operation.  
select the Customize display on the driver  
information interface.  
The +R gauge design cannot be changed.  
2. Roll the right selector wheel to scroll to  
select Gauge design, then press the right  
selector wheel.  
3. Roll the right selector wheel to scroll to  
select your desired settings, then press the  
right selector wheel.  
1Warnings  
Warnings  
■
You can check if there are any active warning messages.  
If there are multiple warnings or informations, you  
can roll the right selector wheel to see other  
warnings.  
* Not available on all models  
171  
This page intentionally left blank.  
172  

Related Topics

Indicators Gauges and Driver Information Interface

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot