2023-2026 Honda Civic 4 Door Instrument Panel -> Gauges and Driver Information Interface User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument Panel -> Gauges and Driver Information Interface for Your Honda Civic 4 Door Eleventh Generation (2023-2026)

Gauges and Driver Information Interface  
Gauges  
Gauges include the speedometer, fuel gauge, and other related indicators.  
They are displayed when the power mode is in ON.  
1Speedometer  
Speedometer  
■
Displays your driving speed in mph or km/h.  
You can set the speedometer and the displayed  
measurements to read in either km/h or mph.  
2 Speed/Distance Units P. 137, 169  
2 Settings P. 138  
2 Customized Features P. 390  
U.S. models  
Models with Auto Idle Stop and B-type meter  
If you change the unit from miles and mph to km and  
km/h, the current vehicle speed in mph appears next  
to the digital speedometer.  
U.S. models without Auto Idle Stop  
If you change the unit from miles and mph to km and  
km/h while the gauge design is set to Round or Bar,  
the current vehicle speed in mph appears next to the  
digital speedometer.  
Vehicle Speed in mph  
118  
uuGauges and Driver Information InterfaceuGauges  
1Tachometer  
Tachometer  
■
Shows the number of engine revolutions per minute.  
Models with A-type meter  
The tachometer can be turned on and off using the  
driver information interface.  
2 Settings P. 138  
Even if you have turned off the tachometer on the  
driver information interface, if No content is selected  
on the driver information interface, it will change to a  
tachometer-only display.  
Models without Auto Idle Stop  
The shift up alarm sounds when the tachometer  
reading approaches the red zone.  
You can turn the shift up alarm feature on and off.  
2 Customized Features P. 390  
1Fuel Gauge  
Fuel Gauge  
■
Displays the amount of fuel left in the fuel tank.  
NOTICE  
You should refuel when the reading approaches  
E
.
Running out of fuel can cause the engine to misfire,  
damaging the catalytic converter.  
The actual amount of remaining fuel may differ from  
the fuel gauge reading.  
Models with B-type meter  
1Temperature Gauge  
Temperature Gauge  
■
Displays the temperature of the engine coolant.  
NOTICE  
Driving with the temperature gauge pointer in the  
upper zone can cause serious engine damage. Pull  
safely to the side of the road and allow engine  
temperature to return to normal.  
2 Overheating P. 789  
Continued  
119  
uuGauges and Driver Information InterfaceuGauges  
Models with Auto Idle Stop  
Odometer  
■
Shows the total number of miles or kilometers that your vehicle has accumulated.  
1Outside Temperature  
Outside Temperature  
■
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).  
The temperature sensor is in the front bumper.  
Road heat and exhaust from another vehicle can  
affect the temperature reading when your vehicle  
speed is less than 19 mph (30 km/h).  
■
Adjusting the outside temperature display  
Adjust the temperature reading by up to 5°F or 3°C if the temperature reading  
seems incorrect.  
It may take several minutes for the display to be  
updated after the temperature reading has stabilized.  
You can adjust the temperature reading.  
2 Settings P. 138  
2 Customized Features P. 390  
120  
uuGauges and Driver Information InterfaceuGauges  
Traffic Sign Recognition System  
■
Shows certain detected traffic signs while driving.  
The indicator blinks when the maximum speed of the traffic sign detected by the  
Traffic Sign Recognition System is exceeded.  
2 Traffic Sign Recognition System P. 645  
Models with A-type meter  
Models with B-type meter  
Continued  
121  
uuGauges and Driver Information InterfaceuGauges  
1Current Mode for ACC with Low Speed Follow*, the LKAS, and  
CurrentModeforACCwithLowSpeedFollow*,theLKAS,andTrafficJamAssist*  
Shows the current mode for ACC with Low Speed Follow*, LKAS, and Traffic Jam  
Assist*.  
■
Traffic Jam Assist*  
Models with Auto Idle Stop and B-type meter  
When you set speed for ACC with Low Speed Follow*  
or cruise control, a set speed mark will be displayed  
on the speedometer.  
2 Adaptive Cruise Control (ACC) with Low Speed Follow* P. 576  
2 Adaptive Cruise Control (ACC)* P. 596  
2 Lane Keeping Assist System (LKAS) P. 616  
2 Traffic Jam Assist* P. 628  
Models without Auto Idle Stop  
If the gauge design is set to Round or Bar, when you  
set speed for ACC or cruise control, a set speed mark  
will be displayed on the speedometer.  
Set  
Speed  
* Not available on all models  
122  
uuGauges and Driver Information InterfaceuGauges  
Models with A-type meter  
1Clock  
Clock  
■
Shows the clock.  
You can adjust the time manually and change the  
clock display to show the 12 hour clock or 24 hour  
clock.  
2 Clock P. 174  
1Rev Indicators*  
Rev Indicators*  
■
Light up from outside to center according to engine speed.  
You can turn the rev indicators on and off.  
2 Customized Features P. 390  
* Not available on all models  
Continued  
123  
uuGauges and Driver Information InterfaceuGauges  
Models without Auto Idle Stop  
1Vehicle Information  
Vehicle Information  
■
Up to 6 items can be selected and displayed at once.  
2 Honda LogR* P. 414  
When using the +R gauge, the following vehicle information can be displayed.  
2 Honda LogR* P. 414  
• Water Temp.  
• Oil Temp.  
You can set a limit for Water Temp. and Oil Temp..  
When the limit is reached, the display will turn  
amber.  
• Oil Pressure  
2 Honda LogR* P. 414  
• Ext. Air Temp.  
• Intake Air Temp.  
• Boost Pressure  
• Steering Angle  
• Accel. Ped. Pos.  
• Brake Pressure  
• Clutch Ped. Pos.  
• Yaw Rate  
When the ACC or LKAS are turned on, vehicle  
information is not displayed.  
• Atmos. Pressure  
* Not available on all models  
124  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Driver Information Interface (A-type Meter)  
The driver information interface shows information such as the estimated travelable  
distance and fuel economy of the vehicle. It also displays messages such as warnings  
and other helpful information.  
When a warning message displays, please check the message and contact a dealer  
and have the vehicle inspected if necessary. Please refer to the pages below if the  
Engine oil pressure low or Engine temperature too hot message is displayed.  
2 If the Engine oil pressure low Warning Appears P. 793  
2 Overheating P. 789  
1Switching the Display  
Switching the Display  
■
Press the  
You can add or delete the meter contents.  
2 Customize Display P. 136  
(home) button, then roll the left selector wheel to scroll to the content  
you want to see. Press the left selector wheel to see detailed information.  
Continued  
125  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Range & fuel  
Warnings  
P. 127  
P. 137  
Speed & time  
No content  
P. 129  
P. 137  
Customize  
display  
Driver  
attention  
P. 136  
P. 131  
Seat belts  
Settings  
P. 134  
P. 138  
Left Selector  
Wheel  
(home) Button  
Maintenance  
Safety  
Support  
Roll the left  
selector wheel.  
P. 134  
P. 134  
126  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Range / Fuel / Trip Meter  
■
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Average Fuel Economy  
Range  
Trip Meter A  
Trip Meter B  
Instant Fuel Economy  
Continued  
127  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
Trip meter  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset the trip meter, display it, press the left selector wheel and then select Reset.  
u The trip meter is reset to 0.0.  
1Range  
The driving range displayed is only an estimate and  
■
Range  
Shows the estimated distance you can travel on the remaining fuel. This estimated  
distance is based on the vehicle's current fuel economy.  
may differ to the actual distance the vehicle can  
travel.  
1Average fuel economy  
■
Average fuel economy  
You can change when to reset the average fuel  
economy.  
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
2 Settings P. 138  
■
Instant fuel economy  
Shows the instant fuel economy as a bar graph in mpg or l/100 km.  
128  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Speed/Time/Trip Meter  
■
Roll the left selector wheel to switch between trip meter A and trip meter B.  
Elapsed Time  
Average Speed  
Trip Meter A  
Trip Meter B  
Continued  
129  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
■
Trip meter  
2 Trip meter P. 128  
Average speed  
1Average speed  
Shows the average speed in mph or km/h since Trip A or Trip B was reset.  
You can change when to reset the average speed.  
2 Settings P. 138  
1Elapsed time  
■
Elapsed time  
Shows the time elapsed since Trip A or Trip B was reset.  
You can change when to reset the elapsed time.  
2 Settings P. 138  
130  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Driver Attention Monitor  
Driver Attention Monitor  
■
The Driver Attention Monitor cannot always detect if  
the driver is tired or inattentive.  
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is  
being driven in a manner consistent with drowsy or inattentive driving. If it  
determines that the vehicle is being driven in such a manner, it will display the  
degree of the driver's attention on the driver information interface.  
Regardless of the system's feedback, if you are  
feeling tired, stop in a safe location and rest for as  
long as needed.  
Driver Information  
Interface  
Left Selector  
Wheel  
(home) Button  
When you select Driver attention on the  
driver information interface, bars on it light up  
in white to indicate the degree of the driver's  
attention.  
2 Switching the Display P. 125  
Level  
Continued  
131  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
If two bars light up, the Driver attention  
level low message will appear.  
If one bar lights up, the Driver attention  
level low. Time for a break. message will  
appear, a beep will sound, and the steering  
wheel will vibrate.  
If this message appears, stop in a safe location  
and rest for as long as needed.  
The message will disappear when the left  
selector wheel is pressed or when the system  
has determined that the driver is driving  
normally.  
If the driver does not take a break and the  
monitor continues to detect that the driver is  
very tired, the message will appear again after  
approximately 15 minutes, accompanied by a  
beep and steering wheel vibrations.  
The message does not appear when the  
traveling time is 30 minutes or less.  
132  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
The Driver Attention Monitor resets when:  
• The engine is turned off.  
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.  
■
For the Driver Attention Monitor to function:  
• The vehicle must be traveling above 25 mph (40 km/h).  
• The electric power steering (EPS) system indicator must be off.  
1For the Driver Attention Monitor to function:  
The bars on the driver information interface remain  
grayed out unless the Driver Attention Monitor is  
functioning.  
■
Depending on driving conditions or other factors, the Driver Attention  
Monitor may not function in the following circumstances:  
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.  
2 Lane Keeping Assist System (LKAS) P. 616  
• The condition of the road is poor, e.g., the surface is unpaved or bumpy.  
• It is windy.  
• The driver is frequently operating the vehicle in an assertive manner such as  
changing lanes or accelerating.  
■
Customizing  
You can change the Driver Attention Monitor settings. Select Tactile and audible  
alert, Tactile alert or OFF.  
2 Settings P. 138  
Continued  
133  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Seat Belts  
■
Occurs, under specified conditions, when seat belts are latched or unlatched.  
2 Seat Belt Reminder P. 50  
Maintenance  
Shows the remaining oil life and Maintenance MinderTM.  
■
2 Maintenance MinderTM P. 693  
1Safety Support  
Safety Support  
Indicates the status of the Road Departure Mitigation system, CMBSTM, and blind  
spot information system* such as On, Off, or Failure, by color and letters.  
■
If a system is indicated by the color amber, have your  
vehicle checked by a dealer immediately.  
To turn on or off each system, first rotate the left  
selector wheel to switch displays. From the next  
display you can select which system to turn on or off.  
2 Road Departure Mitigation system On and  
Off P. 640  
The following colors indicate the status of any of the above mentioned systems:  
• Green: The system is on.  
• Gray: The system is off.  
• Amber: There is a problem with the system.  
2 Blind Spot Information System On and Off  
P. 547  
2 CMBSTM On and Off P. 557  
You can also confirm the status of each function by  
the color of the safety support indicator.  
2 Safety Support Indicator (Amber) P. 115  
2 Safety Support Indicator (Green/Gray)  
P. 117  
* Not available on all models  
134  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Area Info for  
CMBSTM  
Road  
Departure  
Mitigation  
System Icon  
and Status  
Info  
Area Info for  
Road  
Blind Spot  
Information  
System Icon  
and Status  
Info*  
Departure  
Mitigation  
System  
Area Info for  
Blind Spot  
Information  
System*  
CMBSTM Icon  
and Status  
Info  
* Not available on all models  
Continued  
135  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Customize Display  
Customize Display  
■
Icons that are gray cannot be removed from the  
home screen.  
You can choose which icons to display on the home screen.  
1. Roll the left selector wheel to scroll to select  
Customize display, then press the left  
selector wheel.  
Continuously variable transmission models  
When you customize settings, shift to (P  
.
Manual transmission models  
2. Roll the left selector wheel.  
When you customize settings, set the parking brake.  
3. Roll the left selector wheel to scroll  
between icons, then press the left selector  
wheel to check or uncheck them.  
136  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Speed/Distance Units  
■
Enables you to show another unit on the  
driver information interface and set the  
displayed measurements to read in either  
miles and mph or km and km/h.  
Press and hold the left selector wheel when  
you select No content on the driver  
information interface. Each time you do this,  
the unit will change from miles and mph to  
km and km/h or vice versa. After this, a  
confirmation screen will appear for a few  
seconds.  
1Warnings  
Warnings  
■
You can check if there are any active warning messages.  
If there are multiple warnings, you can roll the left  
selector wheel to see other warnings.  
Continued  
137  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
1Settings  
Settings  
■
Use the driver information interface to customize certain features.  
To customize other features, roll the left selector  
wheel.  
2 List of customizable options P. 139  
2 Example of customization settings P. 145  
■
How to customize  
Press the (home) button, then select the Settings screen by rolling the left  
Continuously variable transmission models  
selector wheel while the power mode is in ON, the vehicle is at a complete stop, and  
the shift position is in (P (continuously variable transmission) or the parking brake is  
set (manual transmission). Then, press the left selector wheel.  
When you customize settings, shift to (P  
.
Manual transmission models  
When you customize settings, set the parking brake.  
Driver  
Information  
Interface  
(home) Button  
Left Selector Wheel  
138  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
List of customizable options  
Setup Group Customizable Features  
Description  
Selectable Settings  
TPMS  
calibration*  
—
Calibrates the TPMS.  
Cancel/Calibrate  
Forward collision  
warning distance  
Changes the distance at which CMBSTM alerts.  
Long/Normal*1/Short  
ON/OFF*1  
Causes the system to beep when a vehicle is detected or  
when the vehicle is out of ACC with Low Speed Follow*  
range.  
ACC forward vehicle  
detect beep  
Driver assist  
system setup  
Road departure  
mitigation setting  
Changes the setting for the Road Departure Mitigation  
system.  
Narrow/Normal*1/Wide/  
Warning only  
Lane keeping assist  
suspend beep  
Causes the system to beep when the LKAS is suspended. ON/OFF*1  
Blind spot  
information*  
Audible and visual  
alert*1/Visual alert  
Changes the setting for the blind spot information.  
*1:Default Setting  
* Not available on all models  
Continued  
139  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
ON*1/OFF  
Traffic sign  
recognition system  
display setting  
Turns the traffic sign recognition system on and off.  
Traffic sign  
recognition system  
exceeding speed  
warning  
Turns the traffic sign recognition system over speed  
warning on and off.  
ON*1/OFF  
Speed limit*1/  
Speed limit+3mph/  
Speed limit+5mph/  
Speed limit+10mph  
(When mph is selected)  
Speed limit*1/  
Driver assist  
system setup  
Speed limit warning  
threshold setting  
Changes the setting speed the traffic sign recognition  
system over speed warning is activated.  
Speed limit+5km/h/  
Speed limit+10km/h/  
Speed limit+15km/h  
(When km/h is selected)  
Driver attention  
monitor  
Tactile and audible  
alert*1/ Tactile alert/OFF  
Changes the setting for the driver attention monitor.  
*1:Default Setting  
140  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
English*1/Français/  
Español  
Language selection  
Changes the displayed language.  
-5°F ~ 0°F*1 ~ +5°F  
(U.S.)  
-3°C ~ 0°C*1 ~ +3°C  
(Canada)  
Adjust outside temp.  
display  
Adjusts the temperature reading by a few degrees.  
Changes the setting of how to reset trip meter A,  
average fuel economy A, average speed A, and elapsed  
time A.  
When fully refueled/  
IGN OFF/Manually reset*1  
“Trip A” reset timing  
Changes the setting of how to reset trip meter B,  
average fuel economy B, average speed B, and elapsed  
time B.  
When fully refueled/  
IGN OFF/Manually reset*1  
“Trip B” reset timing  
Adjust alarm volume  
Meter setup  
Changes the alarm volume, such as buzzers, warnings,  
turn signal sound, and so on.  
High/Mid*1/Low  
Fuel efficiency backlight Turns the ambient meter feature on and off.  
ON*1/OFF  
ON*1/OFF  
Rear seat reminder  
Turns the Rear Seat Reminder feature on and off.  
km/h∙km/mph∙miles*1  
(U.S.)  
km/h∙km*1/mph∙miles  
(Canada)  
Speed/distance units  
Selects the trip meter units.  
Selects whether the tachometer is displayed on the  
instrument panel.  
Tachometer  
ON*1/OFF  
*1:Default Setting  
Continued  
141  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Changes which doors unlock when you grab the driver's Driver door only*1/All  
Door unlock mode  
door handle.  
doors  
Keyless access light  
flash  
Causes some exterior lights to flash when you unlock/  
lock the doors.  
ON*1/OFF  
Keyless access  
setup*  
Causes the beeper to sound when you unlock/lock the  
doors.  
Keyless access beep  
ON*1/OFF  
Remote start system  
ON/OFF*  
Turns the remote engine start feature on and off.  
Turns the auto high-beam on and off.  
ON*1/OFF  
Auto high-beam  
ON*1/OFF  
Interior light dimming  
time  
Changes the length of time the interior lights stay on  
after you close the doors.  
60sec/30sec*1/15sec  
Headlight auto off  
Lighting setup timer  
Changes the length of time the exterior lights stay on  
after you close the driver's door.  
60sec/30sec/15sec*1/0sec  
Max/High/Mid*1/Low/Min  
Auto light sensitivity*  
Changes the timing for the headlights to come on.  
Changes the settings for the wiper operation when the  
headlights automatically come on while the headlight  
switch is in the AUTO position.  
Auto headlight ON  
with wiper ON  
ON*1/OFF  
*1:Default Setting  
* Not available on all models  
142  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Continuously variable transmission models  
With vehicle speed*1/Shift from P/OFF  
Changes the setting for when the doors  
automatically lock.  
Auto door lock  
Manual transmission models  
With vehicle speed*1/OFF  
Continuously variable transmission models  
All doors when driver's door opens*1/All  
doors when shifted to Park/All doors  
when ignition switched OFF/OFF  
Changes the setting for when the doors  
automatically unlock.  
Auto door unlock  
Manual transmission models  
All doors when driver's door opens*1/All  
doors when ignition switched OFF/OFF  
Door setup  
Sets up either the driver's door or all  
doors to unlock on the first operation of  
the keyless remote or built-in key.  
Key and remote unlock  
mode  
Driver door*1/All doors  
Changes the settings for the automatic  
locking the doors when you walk away  
from the vehicle while carrying the  
keyless remote.  
Walk away auto lock*  
ON/OFF*1  
Keyless lock answer  
back  
LOCK/UNLOCK- The exterior lights flash.  
LOCK (2nd push)- The beeper sounds.  
ON*1/OFF  
ON*1/OFF  
Keyless remote power  
window control  
Turns remote window control using the  
keyless remote on and off.  
*1:Default Setting  
* Not available on all models  
Continued  
143  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Changes the settings for the lockout  
protection function.  
Door setup  
Lockout prevention*  
ON*1/OFF  
Resets the Maintenance Minder display  
when you have performed the  
maintenance service.  
Maintenance  
reset  
—
—
(Selects Reset Items)  
Cancels customized changes you have  
made or restores them to their default  
setting.  
Default all  
Cancel/Set  
*1:Default Setting  
* Not available on all models  
144  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
■
Example of customization settings  
The steps for changing the “Trip A” reset timing setting to When fully refueled  
are shown below. The default setting for “Trip A” reset timing is Manually reset.  
1. Press the (home) button to select  
Settings, then press the left selector wheel.  
Continued  
145  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
2. Roll the left selector wheel until Meter  
setup appears on the display.  
3. Press the left selector wheel.  
u Language selection appears first in the  
display.  
4. Roll the left selector wheel until “Trip A”  
reset timing appears on the display, then  
press the left selector wheel.  
u The display switches to the  
customization setup screen, where you  
can select When fully refueled, IGN  
OFF, Manually reset, or Back.  
5. Roll the left selector wheel and select  
When fully refueled, then press the left  
selector wheel.  
u The Selected appears, then the display  
returns to the customization menu  
screen.  
146  
uuGauges and Driver Information InterfaceuDriver Information Interface (A-type Meter)  
6. Press the left selector wheel after Back  
appears on the display.  
7. Repeat Step 6 until you return to the  
normal screen.  
147  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Driver Information Interface Left Side Area  
(B-type-Meter)  
Shows the current mode for audio and phone information, etc.  
2 Audio Remote Controls P. 260  
2 Bluetooth® HandsFreeLink® P. 463  
1Clock  
Clock  
■
Shows the clock.  
You can adjust the time manually and change the  
clock display to show the 12 hour clock or 24 hour  
clock.  
2 Clock P. 174  
You can choose whether the clock is displayed on the  
driver information interface.  
2 Customize Display P. 151  
148  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
1Stopwatch*  
Stopwatch*  
■
Measures the lap time, and displays the previously measured times and the fastest  
lap time.  
Be sure to use this measurement function only where  
and when it is safe to do so.  
Lap time is displayed from 00:00.00 to 99:59.99.  
A maximum of 20 lap times can be stored at a time.  
■
Measuring LAP Time  
1. Change the display content on the left side  
area to Stopwatch.  
2 Select the display content on the left  
side area P. 153  
When measuring lap time with Honda LogR, times  
are displayed on the driver information interface.  
2 Honda LogR* P. 414  
2. Press the left selector wheel to display the  
stopwatch menu screen.  
3. Select Lap Timer and press the left selector  
wheel to display the lap time measurement  
screen.  
4. Press the left selector wheel to start  
measurement.  
5. Press the left selector wheel to stop  
measurement.  
u To measure the time per lap, roll the left  
selector wheel at the end of each lap.  
u To return to the stopwatch menu screen,  
press and hold the left selector wheel.  
* Not available on all models  
Continued  
149  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
■
Checking/Clearing history  
To check or clear the history, select History/  
Reset on the stopwatch menu screen and  
press the left selector wheel.  
u To scroll through the lap times, roll the  
left selector wheel.  
u To clear the history, press the left selector  
wheel on the stopwatch history screen  
while the lap time is not being measured,  
then select and press Reset.  
u To return to the stopwatch menu screen,  
press and hold the left selector wheel.  
150  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
1Customize Display  
Customize Display  
■
Continuously variable transmission models  
■
Arrange audio source on the left side area  
You can choose which sources to display on the audio source screen.  
When you customize settings, shift to (P  
.
Manual transmission models  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
When you customize settings, set the parking brake.  
2. Roll the left selector wheel to scroll to select  
Hide/show, then press the left selector  
wheel.  
3. Roll the left selector wheel to scroll  
between audio sources, then press the left  
selector wheel to check or uncheck them.  
Continued  
151  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Models with Auto Idle Stop  
■
Turn the displaying on the left side area on and off  
You can select whether the current audio information and clock appear on the left  
side area.  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
2. Roll the left selector wheel to scroll to select  
Audio & clock, then press the left selector  
wheel.  
3. Roll the left selector wheel to scroll to select  
your desired settings, then press the left  
selector wheel.  
152  
uuGauges and Driver Information InterfaceuDriver Information Interface Left Side Area (B-type-Meter)  
Models without Auto Idle Stop  
■
Select the display content on the left side area  
You can change the display content on the left side area. Select Audio & clock,  
Stopwatch, or OFF.  
1. Roll the left selector wheel until Customize  
display is selected, then press the left  
selector wheel.  
2. Roll the left selector wheel to scroll to select  
Display content, then press the left  
selector wheel.  
3. Roll the left selector wheel to scroll to select  
your desired content, then press the left  
selector wheel.  
153  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Driver Information Interface Right Side Area  
(B-type-Meter)  
The driver information interface shows information such as the estimated travelable  
distance and fuel economy of the vehicle. It also displays messages such as warnings  
and other helpful information.  
When a warning message displays, please check the message and contact a dealer  
and have the vehicle inspected if necessary. Please refer to the pages below if the  
Engine oil pressure low or Engine temperature too hot message is displayed.  
2 If the Engine oil pressure low Warning Appears P. 793  
2 Overheating P. 789  
154  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Switching the Display  
Switching the Display  
■
Roll the right selector wheel to view different types of content.  
You can add or delete the meter contents.  
2 Customize Display P. 170  
Models with Auto Idle Stop  
Range/Fuel/Trip  
Meter  
Speed/Time/  
Trip Meter  
Navigation/Compass  
Driver Attention  
Monitor  
Seat Belts  
P. 160  
P. 166  
P. 157  
P. 159  
P. 161  
Warning Messages  
No Content/  
Unit Change  
Customize Display  
Safety Support  
Maintenance  
P. 171  
P. 170  
P. 167  
P. 166  
P. 169  
Continued  
155  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Models without Auto Idle Stop  
Range/Fuel/  
Odometer/Trip  
Meter  
Speed/Time/  
Odometer/Trip  
Meter  
Navigation/Compass  
Driver Attention  
Monitor  
Turbo Gauge  
P. 160  
P. 164  
P. 161  
P. 157  
P. 159  
Seat Belts  
G-Meter  
Accelerator  
Position/Braking  
Pressure Meter  
Maintenance  
P. 166  
P. 166  
P. 165  
Right Selector Wheel  
P. 164  
Warning Messages  
Customize Display  
No Content/  
Unit Change  
Safety Support  
P. 171  
P. 170  
P. 167  
P. 169  
156  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Range/Fuel/Odometer*/Trip Meter  
Press the right selector wheel to switch trip meter A, trip meter B, and odometer*.  
■
Range  
Instant Fuel Economy  
Average Fuel Economy  
Trip Meter B  
Trip Meter A  
Odometer*  
* Not available on all models  
Continued  
157  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
Odometer*  
Shows the total number of miles or kilometers that your vehicle has accumulated.  
■
Trip meter  
Shows the total number of miles or kilometers driven since the last reset. Meters A  
and B can be used to measure two separate trips.  
Resetting a trip meter  
To reset the trip meter, display it, press and hold the right selector wheel and then  
select Reset.  
u The trip meter is reset to 0.0.  
■
Range  
1Range  
The driving range displayed is only an estimate and  
Shows the estimated distance you can travel on the remaining fuel. This estimated  
distance is based on the vehicle's current fuel economy.  
may differ to the actual distance the vehicle can  
travel.  
■
Average fuel economy  
1Average fuel economy  
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
You can change when to reset the average fuel  
economy.  
2 Customized Features P. 390  
■
Instant fuel economy  
Shows the instant fuel economy as a bar graph in mpg or l/100 km.  
* Not available on all models  
158  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Speed/Time/Odometer*/Trip Meter  
Press the right selector wheel to switch trip meter A, trip meter B, and odometer*.  
■
Elapsed Time  
Average Speed  
Trip Meter B  
Trip Meter A  
Odometer*  
* Not available on all models  
Continued  
159  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
■
■
Odometer*  
2 Odometer* P. 158  
Trip meter  
2 Trip meter P. 158  
Average speed  
1Average speed  
Shows the average speed in mph or km/h since Trip A or Trip B was reset.  
You can change when to reset the average speed.  
2 Customized Features P. 390  
1Elapsed time  
■
Elapsed time  
Shows the time elapsed since Trip A or Trip B was reset.  
You can change when to reset the elapsed time.  
2 Customized Features P. 390  
1Navigation  
Navigation  
■
You can select whether to have the turn-by-turn  
display come on or not during the route guidance.  
2 Customized Features P. 390  
■
Compass  
Shows the compass screen.  
When the compass or turn-by-turn directions are  
displayed, you can control some navigation system  
functions on the driver information interface by  
pressing the right selector wheel.  
■
Turn-by-Turn Directions  
When driving guidance is provided by the navigation system, Apple CarPlay or  
Android Auto, turn-by-turn directions to your destination appear.  
2 Refer to the Navigation System Manual  
2 Refer to the Navigation System Manual  
2 Android AutoTM P. 285  
2 Apple CarPlay P. 346  
Turn-by-turn directions may not be available for all  
apps.  
* Not available on all models  
160  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Driver Attention Monitor  
Driver Attention Monitor  
■
The Driver Attention Monitor cannot always detect if  
the driver is tired or inattentive.  
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is  
being driven in a manner consistent with drowsy or inattentive driving. If it  
determines that the vehicle is being driven in such a manner, it will display the  
degree of the driver's attention on the driver information interface.  
Regardless of the system's feedback, if you are  
feeling tired, stop in a safe location and rest for as  
long as needed.  
Driver Information Interface  
Right Selector  
Wheel  
When you select Driver Attention Monitor on  
the driver information interface, bars on it  
light up in white to indicate the degree of the  
driver's attention.  
2 Switching the Display P. 155  
Level  
Continued  
161  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
If two bars light up, the Driver attention  
level low message will appear.  
If one bar lights up, the Driver attention  
level low. Time for a break. message will  
appear, a beep will sound, and the steering  
wheel will vibrate.  
If this message appears, stop in a safe location  
and rest for as long as needed.  
The message will disappear when the right  
selector wheel is rolled or when the system  
has determined that the driver is driving  
normally.  
If the driver does not take a break and the  
monitor continues to detect that the driver is  
very tired, the message will appear again after  
approximately 15 minutes, accompanied by a  
beep and steering wheel vibrations.  
The message does not appear when the  
traveling time is 30 minutes or less.  
162  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
The Driver Attention Monitor resets when:  
• The engine is turned off.  
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.  
■
For the Driver Attention Monitor to function:  
• The vehicle must be traveling above 25 mph (40 km/h).  
• The electric power steering (EPS) system indicator must be off.  
1For the Driver Attention Monitor to function:  
The bars on the driver information interface remain  
grayed out unless the Driver Attention Monitor is  
functioning.  
■
Depending on driving conditions or other factors, the Driver Attention  
Monitor may not function in the following circumstances:  
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.  
2 Lane Keeping Assist System (LKAS) P. 616  
• The condition of the road is poor, e.g., the surface is unpaved or bumpy.  
• It is windy.  
• The driver is frequently operating the vehicle in an assertive manner such as  
changing lanes or accelerating.  
■
Customizing  
You can change the Driver Attention Monitor settings. Select Tactile And Audible  
Alert, Tactile Alert, or OFF.  
2 Customized Features P. 390  
Continued  
163  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Turbo Gauge*  
■
When the turbo is producing boost, this gauge indicates boost pressure is building.  
Accelerator Position/Braking Pressure Meter*  
■
■
Accelerator Position Meter  
Displays the accelerator position in degrees  
of %.  
■
Braking Pressure Meter  
Displays the brake pressure in psi when the  
brake is applied.  
Accelerator Position Meter  
Braking Pressure Meter  
* Not available on all models  
164  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1G-Meter*  
G-Meter*  
■
Displays the strength (G) and direction of the load that is applied to the vehicle  
during driving.  
You can change the maximum displayed strength  
(G).  
2 Honda LogR* P. 414  
When decelerated while moving forward  
When accelerated while reversing  
Lateral forces of  
the past three  
seconds (white)  
When steering  
to the left  
When steering  
to the right  
Real-time lateral  
force (yellow)  
When accelerated while moving forward  
When decelerated while reversing  
* Not available on all models  
Continued  
165  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Seat Belts  
■
Occurs, under specified conditions, when seat belts are latched or unlatched.  
2 Seat Belt Reminder P. 50  
Maintenance  
Shows the remaining oil life and Maintenance MinderTM.  
■
2 Maintenance MinderTM P. 693  
166  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Safety Support  
Safety Support  
■
If a system is indicated by the color amber, have your  
vehicle checked by a dealer immediately.  
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot information system such as On, Off, or Failure, by  
color and letters.  
To turn on or off each system, first press the right  
selector wheel to switch displays. From the next  
display you can select which system to turn on or off.  
2 Road Departure Mitigation system On and  
Off P. 640  
The following colors indicate the status of any of the above mentioned systems:  
• Green: The system is on.  
• Gray: The system is off.  
2 Blind Spot Information System On and Off  
P. 547  
• Amber: There is a problem with the system.  
2 System On and Off P. 568, 573  
2 CMBSTM On and Off P. 557  
You can also confirm the status of each function by  
the color of the safety support indicator.  
2 Safety Support Indicator (Amber) P. 115  
2 Safety Support Indicator (Green/Gray)  
P. 117  
Models with Low Speed Braking Control  
Even when the Low Speed Braking Control icon is  
green, if the parking sensor is turned off for the rear  
only, the brake assist will not operate when reversing.  
2 Turning off All Rear Sensors P. 674  
* Not available on all models  
Continued  
167  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Area Info for  
Road Departure  
Mitigation  
System  
Road Departure  
Mitigation System  
Icon and Status  
Info  
Area Info for Blind Blind Spot  
Spot Information  
System  
Information System  
Icon and Status Info  
Area Info for the  
Low Speed  
Braking Control*  
Low Speed Braking  
Control Icon and  
Status Info*  
Area Info for  
CMBSTM  
CMBSTM Icon  
and Status Info  
* Not available on all models  
168  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
Speed/Distance Units  
■
Enables you to show another unit on the  
driver information interface and set the  
displayed measurements to read in either  
miles and mph or km and km/h.  
Models with Auto Idle Stop  
Press and hold the right selector wheel when  
you select the Blank/Unit change screen on  
the driver information interface. Each time you  
do this, the unit will change from miles and  
mph to km and km/h or vice versa. After this,  
a confirmation screen will appear for a few  
seconds.  
Models without Auto Idle Stop  
Continued  
169  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
1Arrange content on the right side area  
Customize Display  
■
Contents that are gray cannot be removed from the  
right side area.  
■
Arrange content on the right side area  
You can choose which contents to display on the right side area.  
1. Press the right selector wheel when you  
Continuously variable transmission models  
When you customize settings, shift to (P  
.
select the Customize display on the driver  
information interface.  
Manual transmission models  
When you customize settings, set the parking brake.  
2. Roll the right selector wheel to scroll to  
select Hide/show, then press the right  
selector wheel.  
3. Roll the right selector wheel to scroll  
between contents, then press the right  
selector wheel to check or uncheck them.  
170  
uuGauges and Driver Information InterfaceuDriver Information Interface Right Side Area (B-type-Meter)  
■
Change gauge design  
You can change the gauge design to a round or bar design.  
1. Press the right selector wheel when you  
1Change gauge design  
When using the Round minimal or Bar minimal  
gauge design, a simplified display is used when ACC  
with Low Speed Follow* is in operation.  
select the Customize display on the driver  
information interface.  
The +R gauge design cannot be changed.  
2. Roll the right selector wheel to scroll to  
select Gauge design, then press the right  
selector wheel.  
3. Roll the right selector wheel to scroll to  
select your desired settings, then press the  
right selector wheel.  
1Warnings  
Warnings  
■
You can check if there are any active warning messages.  
If there are multiple warnings or informations, you  
can roll the right selector wheel to see other  
warnings.  
* Not available on all models  
171  
This page intentionally left blank.  
172  

Related Topics

Instrument Panel
Indicators

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot