2023-2026 Honda Civic 4 Door Instrument Panel -> Indicators User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument Panel -> Indicators for Your Honda Civic 4 Door Eleventh Generation (2023-2026)

Indicators  
Indicators come on/blink depending on the condition of the vehicle. Messages may  
display on the driver information interface at the same time. Please take the  
appropriate action outlined in the message, such as contacting a dealer.  
*1  
*1  
P. 101  
P. 101  
Charging System Indicator  
Shift Position Indicator*  
P. 103  
P. 103  
Low Fuel Indicator  
U.S.  
Parking Brake and Brake  
System Indicator (Red)  
P. 98  
*1  
Canada  
Anti-lock Brake System  
(ABS) Indicator  
*1  
*1  
M (7-speed manual shift  
mode) Indicator/Shift  
Indicator*  
P. 101  
P. 102  
Parking Brake and Brake  
System Indicator (Amber)  
U.S.  
P. 100  
P. 100  
P. 100  
P. 101  
*1  
Supplemental Restraint  
System Indicator  
*1  
P. 104  
P. 104  
P. 104  
P. 105  
Canada  
Transmission System  
Indicator*  
*1  
Automatic Brake Hold  
System Indicator  
Electric Power Steering  
(EPS) System Indicator  
*1  
Gear Position Indicator*  
Shift Up Indicator*  
P. 102  
P. 102  
P. 102  
*1  
*1  
U.S.  
Automatic Brake Hold  
Indicator  
Vehicle Stability AssistTM  
(VSA®) System Indicator  
*1  
Shift Down Indicator*  
Canada  
Vehicle Stability AssistTM  
(VSA ) OFF Indicator  
*1  
Malfunction Indicator  
Lamp  
Seat Belt Reminder  
Indicator  
*1  
P. 103  
®
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine  
has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the  
owner's manual.  
* Not available on all models  
96  
uuIndicatorsu  
*1 Low Tire Pressure/TPMS  
Indicator*  
INDIVIDUAL Mode  
Indicator*  
Immobilizer System  
Indicator  
P. 105  
P. 106  
P. 108  
P. 110  
P. 110  
COMFORT Mode Indicator*  
+R Mode Indicator*  
P. 108  
P. 109  
Security System Alarm  
Indicator  
Turn Signal and Hazard  
Warning Indicators  
Adaptive Cruise Control  
(ACC) with Low Speed  
*1  
P. 106  
P. 106  
P. 106  
P. 106  
Lights On Indicator  
High Beam Indicator  
Low Temperature  
Indicator*  
*1  
P. 109  
P. 114  
P. 113  
Follow* Indicator (Amber)  
Cruise Mode Indicator  
(White/Green)  
Adaptive Cruise Control  
(ACC) with Low Speed  
Follow* Indicator  
*1  
P. 113  
Auto High-Beam Indicator  
Adaptive Cruise Control  
(ACC) with Low Speed  
Follow* Interval Indicator*  
(White/Green)  
P. 114  
P. 111  
Fog Light Indicator*  
*1  
Lane Keeping Assist System  
(LKAS) Indicator (Amber)  
P. 114  
P. 114  
Auto Idle Stop OFF  
Indicator*  
P. 107  
P. 108  
System Message Indicator  
Lane Keeping Assist System  
(LKAS) Indicator (White/  
Green)  
*2  
Auto Idle Stop Suspend  
Indicator*  
P. 112  
P. 111  
P. 111  
ECON Mode Indicator*  
*3  
*1  
Safety Support Indicator  
(Amber)  
*1  
Auto Idle Stop System  
Indicator (Amber)*  
P. 115  
P. 117  
NORMAL Mode Indicator*  
SPORT Mode Indicator*  
P. 108  
P. 108  
Auto Idle Stop Indicator  
(Green)*  
Safety Support Indicator  
(Green/Gray)  
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine  
has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the  
owner's manual.  
*2: Models without drive mode switch  
*3: Models with drive mode switch  
* Not available on all models  
Continued  
97  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Comes on when the parking brake is  
applied, and goes off when it is released.  
The beeper sounds and the indicator comes on if  
you drive with the parking brake applied.  
Comes on for about 30 seconds when you apply  
the electric parking brake while the power mode is  
in ACCESSORY or VEHICLE OFF, then goes off.  
Stays on for about 30 seconds when you set the  
power mode to VEHICLE OFF while the electric  
parking brake is applied, then goes off.  
U.S.  
●
Parking Brake and  
Brake System  
Indicator (Red)  
Canada  
(Red)  
• Comes on when the brake fluid level is  
low.  
• Comes on while driving - Make sure the parking  
brake is released. Stop in a safe place and check  
the brake fluid level.  
2 What to do when the indicator comes on  
while driving P. 795  
98  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
1.5 L engine models  
Comes on if there is a problem with the  
brake system.  
●
Comes on along with the Parking Brake and  
Brake System Indicator (amber) - Immediately  
stop in a safe place. Contact a dealer for repair. The  
brake pedal becomes harder to operate. Depress  
the pedal further than you normally do.  
2 If the Brake System Indicator (Red) Comes On  
or Blinks at the Same Time When the Brake  
System Indicator (Amber) Comes On P. 797  
U.S.  
All models  
Parking Brake and  
Brake System  
Indicator (Red)  
●
Comes on along with the ABS indicator - Have  
your vehicle checked by a dealer.  
Canada  
(Red)  
2 If the Brake System Indicator (Red) Comes On  
or Blinks P. 795  
●
Blinks and the Parking Brake and Brake System  
Indicator (amber) comes on at the same time -  
There is a problem with the electric parking brake  
system. The parking brake may not be set.  
Avoid using the parking brake and have your  
vehicle checked by a dealer immediately.  
2 If the Brake System Indicator (Red) Comes On  
or Blinks at the Same Time When the Brake  
System Indicator (Amber) Comes On P. 797  
Continued  
99  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
U.S.  
Comes on if there is a problem with a  
system related to braking other than the  
conventional brake system.  
Comes on while driving - Have your vehicle  
checked by a dealer.  
With this indicator on, your vehicle still has normal  
braking ability.  
Parking Brake and  
Brake System  
Indicator (Amber)  
Canada  
●
Comes on if there is a problem with the  
electric parking brake system and/or the  
automatic brake hold system.  
Stays on constantly - Avoid using the parking  
brake and have your vehicle checked by a dealer  
immediately.  
(Amber)  
●
●
Automatic Brake  
Hold System  
Indicator  
Comes on when the automatic brake hold  
system is on.  
2 Automatic Brake Hold P. 660  
U.S.  
Comes on when the automatic brake hold  
is activated.  
Automatic Brake  
Hold Indicator  
2 Automatic Brake Hold P. 660  
Canada  
100  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
After you have set the power mode to ON,  
the vehicle performs system checks.  
However, if the readiness codes have not  
been set by that time, this indicator will  
blink five times and then go off.  
Readiness codes are part of the on-board  
diagnostics for the emissions control systems.  
2 Testing of Readiness Codes P. 818  
Malfunction  
Indicator Lamp  
●
●
Comes on if there is a problem with the  
emissions control systems.  
Blinks when a misfire in the engine's  
cylinders is detected.  
2 If the Malfunction Indicator Lamp Comes On  
or Blinks P. 794  
●
●
Comes on when there is a problem with  
the charging system.  
Stop in a safe place and contact a dealer  
immediately.  
Charging System  
Indicator  
2 Checking the Battery P. 745  
2 If the Charging System Indicator Comes On  
P. 794  
●
●
Indicates the current shift position.  
Shift Position  
Indicator*  
2 Shifting P. 501, 503  
M (7-speed  
Comes on when the 7-speed manual shift  
mode is applied.  
manual shift mode)  
Indicator/Shift  
Indicator*  
2 7-Speed Manual Shift Mode P. 505  
* Not available on all models  
Continued  
101  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Blinks if the transmission system has a  
problem.  
Have your vehicle checked by a dealer immediately.  
Transmission  
System Indicator*  
●
●
Indicates 1st to 6th gear position and (N  
.
If you shift gears very slowly, a different gear  
position may be displayed for a moment.  
2 Shifting P. 507  
When the power mode is turned on, (N is not  
displayed until it is shifted into (R or 1st to 6th gear  
position.  
1st to 6th gear positions are not displayed when  
the vehicle is stopped.  
The display can be turned ON/OFF in customized  
features in the audio/information screen.  
2 Customized Features P. 390  
Gear Position  
Indicator*  
●
●
●
●
Comes on when shifting up is  
recommended.  
Shift Up Indicator*  
2 Shift Up/Down Indicators P. 509  
2 Shift Up/Down Indicators P. 509  
Shift Down  
Indicator*  
Comes on when shifting down is  
recommended.  
* Not available on all models  
102  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
Blinks and the beeper sounds for a few  
seconds if you are not wearing a seat belt  
when you set the power mode to ON, then  
the indicator comes on.  
If the front passenger is not wearing a seat  
belt, the indicator comes on a few seconds  
later.  
Comes on for a while when the rear seat  
belt is unfastened while the power mode in  
ON.  
Blinks while driving if you and/or any  
passenger has not fastened a seat belt. The  
beeper sounds and the indicator blinks at  
regular intervals.  
The beeper stops and the indicator goes off when  
you and the passengers fasten their seat belts.  
Stays on after you and/or the passengers have  
fastened the seat belt(s) - A detection error may  
have occurred in the sensor. Have your vehicle  
checked by a dealer.  
●
●
●
2 Seat Belt Reminder P. 50  
Seat Belt Reminder  
Indicator  
●
●
Comes on when the fuel reserve is running  
low (approximately 1.8 U.S. gal/7.0 Liter  
left).  
Comes on - Refuel your vehicle as soon as possible.  
Low Fuel Indicator  
●
●
●
●
Blinks if there is a problem with the fuel  
gauge.  
Have your vehicle checked by a dealer.  
Comes on if there is a problem with the  
ABS.  
Stays on constantly - Have your vehicle checked  
by a dealer. With this indicator on, your vehicle still  
has normal braking ability but no anti-lock  
function.  
Anti-lock Brake  
System (ABS)  
Indicator  
2 Anti-lock Brake System (ABS) P. 665  
Continued  
103  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Comes on if a problem with any of the  
following is detected:  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Supplemental  
Restraint System  
Indicator  
- Supplemental Restraint System  
- Side airbag system  
- Side curtain airbag system  
- Seat belt tensioner  
• Comes on if there is a problem with the  
EPS system.  
• Stays on constantly - Have your vehicle checked  
by a dealer.  
Electric Power  
Steering (EPS)  
System Indicator  
• Do not drive displays on the driver  
information interface - Immediately stop in a  
safe place and contact a dealer.  
2 If the Electric Power Steering (EPS) System  
Indicator Comes On P. 796  
●
Blinks when VSA® is active.  
—
●
●
Comes on if there is a problem with the  
Stays on constantly - Have your vehicle checked  
VSA® system, brake assist system, hill start  
assist system, starting assist brake  
function*, or agile handling assist.  
by a dealer.  
2 Vehicle Stability AssistTM (VSA®), aka  
Electronic Stability Control (ESC), System  
P. 533  
Vehicle Stability  
AssistTM (VSA®)  
System Indicator  
2 Hill start assist system P. 496  
●
●
Comes on if the VSA® system is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
* Not available on all models  
104  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
2 VSA® On and Off P. 534  
Comes on when you partially disable VSA®.  
Models without Auto Idle Stop  
●
Comes on when you press and hold the  
(VSA® OFF) button while +R mode is  
selected.  
2 When in +R Drive mode P. 535  
Vehicle Stability  
AssistTM (VSA®)  
OFF Indicator  
●
Models with A-type meter  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
●
Comes on if the VSA® system is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
●
●
●
●
May come on briefly if the power mode is  
set to ON and the vehicle is not moved  
within 45 seconds, to indicate the  
calibration process is not yet complete.  
Comes on and stays on when:  
- One or more tires' pressures are  
determined to be significantly low.  
- The system has not been calibrated.  
Comes on while driving - Stop in a safe place,  
check tire pressures, and inflate the tire(s) if  
necessary.  
Stays on after the tires are inflated to the  
recommended pressures - The system needs to  
be calibrated.  
2 TPMS Calibration P. 539  
Low Tire Pressure/  
TPMS Indicator*  
●
●
Blinks for about one minute, and then stays  
on if there is a problem with the TPMS, or  
when a compact spare tire is temporarily  
installed.  
Blinks and remains on - Have your vehicle  
checked by a dealer. If the vehicle is fitted with a  
compact spare tire, get your regular tire repaired or  
replaced and put back on your vehicle as soon as  
you can.  
●
●
Comes on if the TPMS is deactivated  
temporarily after the battery has been  
disconnected, then re-connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
* Not available on all models  
Continued  
105  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
• Blinks when you operate the turn signal  
lever.  
• Blinks along with all turn signals when you  
press the hazard warning button.  
• Does not blink or blinks rapidly  
2 Replacing Light Bulbs P. 727  
Turn Signal and  
Hazard Warning  
Indicators  
• Comes on when the parking, tail, and  
other external lights are on.  
2 Light Switches P. 206  
Lights On Indicator  
• Comes on when the high beam headlights  
are on.  
High Beam  
Indicator  
—
• Comes on when all the operating  
conditions of the auto high-beam are met.  
Auto High-Beam  
Indicator  
2 Auto High-Beam P. 210  
2 Fog Lights* P. 209  
• Comes on when the fog lights are on.  
Fog Light  
Indicator*  
* Not available on all models  
106  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
• Comes on along with a beep when a  
problem is detected. A system message on  
the driver information interface appears at  
the same time.  
Refer to the Indicators information in this chapter  
when a system message appears on the driver  
information interface. Take the appropriate action  
for the message.  
Models with A-type meter  
●
While the indicator is on, press the  
(home)  
button, and select Warnings to see the message  
again.  
2 Switching the Display P. 125  
System Message  
Indicator  
●
The driver information interface will not return to  
the normal screen unless the warning is canceled,  
or the  
(home) button is pressed.  
Models with B-type meter  
●
While the indicator is on, roll the right selector  
wheel to see the message again.  
2 Switching the Display P. 155  
●
The driver information interface will not return to  
the normal screen unless the warning is canceled,  
or the right selector wheel is rolled.  
Continued  
107  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Models without drive mode switch  
●
Comes on when the ECON mode is on.  
*1  
2 ECON Button* P. 511  
2 Drive Mode Switch* P. 523, 527  
ECON Mode  
Indicator*  
Models with drive mode switch  
*2  
●
Comes on when you set the drive mode  
to ECON.  
●
●
Comes on when you set the drive mode  
to NORMAL.  
NORMAL Mode  
Indicator*  
2 Drive Mode Switch* P. 523, 527  
Models with A-type meter  
Comes on when you set the drive mode  
to SPORT.  
●
The ambient meter remains lit up in red as long as  
SPORT mode is selected.  
SPORT Mode  
Indicator*  
Models with B-type meter  
The ambient meter* goes off and gauges in the  
instrument panel lit up in red as long as SPORT  
mode is selected.  
●
2 Drive Mode Switch* P. 523, 527  
●
●
Comes on when you set the drive mode  
to INDIVIDUAL.  
INDIVIDUAL  
Mode Indicator*  
2 Drive Mode Switch* P. 527  
2 Drive Mode Switch* P. 527  
Comes on when you set the drive mode  
to COMFORT.  
COMFORT Mode  
Indicator*  
*1:Models without drive mode switch  
*2:Models with drive mode switch  
* Not available on all models  
108  
uuIndicatorsu  
Indicator  
Name  
+R Mode  
On/Blinking  
Explanation  
●
●
Comes on when you set the drive mode to  
+R.  
2 Drive Mode Switch* P. 527  
Indicator*  
●
Comes on when the engine coolant  
temperature is low.  
If the indicator stays on after the engine has  
reached normal operating temperature, there may  
be a problem with the temperature sensors. Have  
your vehicle inspected by a dealer.  
Low Temperature  
Indicator*  
* Not available on all models  
Continued  
109  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
• Blinks if the immobilizer system cannot  
recognize the key information.  
• Blinks - You cannot start the engine. Set the  
power mode to VEHICLE OFF, then select the ON  
mode again.  
Models with  
A-type meter  
Indicator  
Canadian models  
Depress and hold the brake pedal before setting  
the power mode to ON.  
• Repeatedly blinks - The system may be  
malfunctioning. Have your vehicle checked by a  
dealer.  
Immobilizer System  
Indicator  
Models with  
B-type meter  
Indicator  
• Do not attempt to alter this system or add other  
devices to it. Electrical problems can occur.  
• Blinks when the security system alarm has  
been set.  
Models with  
A-type meter  
Indicator  
Security System  
Alarm Indicator  
2 Security System Alarm P. 195  
Models with  
B-type meter  
Indicator  
110  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
Comes on when the Auto Idle Stop system  
has been turned off by the Auto Idle Stop  
OFF button.  
Auto Idle Stop OFF  
Indicator*  
2 Auto Idle Stop System ON/OFF P. 513, 519  
Blinks - Have your vehicle checked by a dealer.  
●
●
●
Blinks if there is a problem with the Auto  
Idle Stop system.  
Auto Idle Stop  
System Indicator  
(Amber)*  
Comes on when Auto Idle Stop is in  
operation. The engine automatically shuts  
off.  
Auto Idle Stop  
Indicator (Green)*  
2 Auto Idle Stop P. 512, 518  
* Not available on all models  
Continued  
111  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
Comes on while Auto Idle Stop is  
temporarily suspended in the following  
situations.  
—
Continuously variable transmission models  
●
Depress the brake pedal firmly.  
- Brake pedal is not fully pressed  
Continuously variable transmission models  
- The transmission is in a position other than  
(D  
- System charging is prioritized  
2 Auto Idle Stop P. 512, 518  
Auto Idle Stop  
Suspend Indicator*  
- Climate control system is prioritized  
- Engine coolant temperature is not in  
operating range  
2 Auto Idle Stop P. 512, 518  
2 Drive Mode Switch* P. 523, 527  
- SPORT mode* is selected.  
- The battery temperature is too low.  
- Auto Idle Stop does not activate for some  
reason.  
2 Auto Idle Stop P. 512, 518  
●
If you press and hold the Auto Idle Stop OFF  
button, you can select whether to display the status  
messages or not.  
—
* Not available on all models  
112  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with ACC  
with Low Speed Follow*.  
Comes on while driving - Have your vehicle  
checked by a dealer.  
Comes on if the ACC with Low Speed  
Follow* is deactivated temporarily after the  
battery has been disconnected, then re-  
connected.  
Drive a short distance at more than 12 mph (20 km/h).  
The indicator should go off. If it does not, have your  
vehicle checked by a dealer.  
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Indicator (Amber)  
●
●
●
●
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
ACC with Low Speed Follow* has been  
automatically canceled.  
Make sure the total load is within the Maximum  
Load Limit.  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Indicator  
Lights up in white when you press the  
button.  
Lights up in green when you press the RES/  
+/SET/- switch up or down.  
2 Adaptive Cruise Control (ACC) with Low  
Speed Follow* P. 576  
2 Adaptive Cruise Control (ACC)* P. 596  
(White/Green)  
* Not available on all models  
Continued  
113  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with the  
LKAS.  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Lane Keeping  
Assist System  
(LKAS) Indicator  
(Amber)  
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
Make sure the total load is within the Maximum  
Load Limit.  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
●
Lane Keeping  
Assist System  
(LKAS) Indicator  
(White/Green)  
Lights up in white when you press the LKAS  
button.  
Lights up in green when the LKAS is in  
operation.  
2 Lane Keeping Assist System (LKAS) P. 616  
●
●
Lights up in white when you change to  
cruise mode.  
Lights up in green when you have set a  
speed for cruise control.  
Cruise Mode  
Indicator  
(White/Green)  
2 To Switch ACC with Low Speed Follow to  
Cruise Control P. 594  
2 To Switch ACC to Cruise Control P. 614  
●
●
Comes on when Adaptive Cruise Control  
(ACC) with Low Speed Follow* indicator  
comes on.  
Each time you press the interval button, the  
following interval (the interval behind a vehicle  
detected ahead of you) setting cycles through  
Furthest, Far, Mid, and Nearest following  
intervals.  
Adaptive Cruise  
Control (ACC) with  
Low Speed Follow*  
Interval Indicator*  
2 To Set or Change Following-interval P. 590  
* Not available on all models  
114  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
●
●
Comes on if there is a problem with Road  
Departure Mitigation system, CMBSTM, Low  
Speed Braking Control* or blind spot  
information system*.  
Stays on constantly - Have your vehicle checked  
by a dealer.  
Indicator may come on temporarily when  
the Maximum Load Limit is exceeded.  
Make sure the total load is within the Maximum  
Load Limit.  
Safety Support  
Indicator (Amber)  
2 Maximum Load Limit P. 487  
Stays on constantly - Have your vehicle checked  
by a dealer.  
●
●
●
Comes on if the Road Departure Mitigation  
system, CMBSTM and Low Speed Braking  
Control* are deactivated temporarily after  
the battery has been disconnected and  
then re-connected.  
Drive a short distance at more than 12 mph (20  
km/h). The indicator should go off. If it does not,  
have your vehicle checked by a dealer.  
* Not available on all models  
Continued  
115  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Comes on when the Road Departure  
Mitigation system and/or CMBSTM shuts  
itself off.  
Stays on - The temperature inside the camera is  
too high.  
Use the climate control system to cool down the  
camera.  
The system activates when the temperature inside  
the camera cools down.  
2 Front Wide View Camera P. 651  
●
●
Stays on - The area around the camera is blocked  
by dirt, mud, etc. Stop your vehicle in a safe place  
and wipe the debris off with a soft cloth.  
Have your vehicle checked by a dealer if the  
indicator and message are still displayed even after  
you have cleaned the area around the camera.  
2 Front Wide View Camera P. 651  
Safety Support  
Indicator (Amber)  
●
It may come on when the ambient conditions are  
dark, such as when driving in a tunnel, or at night,  
dawn, or dusk.  
116  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
●
●
Models with Low Speed Braking Control  
Remove the obstacle in the vicinity of the sonar  
sensor.  
●
Comes on when mud, snow, or ice  
accumulates in the vicinity of the sonar  
sensor.  
2 Low Speed Braking Control* P. 565, 571  
Models with blind spot information system  
Comes on while driving - Something may be  
interfering with the blind spot information system  
sensor. Check the vicinity of the blind spot  
information system sensor and remove any  
obstacles.  
Safety Support  
Indicator (Amber)  
●
Comes on when mud, snow, or ice  
accumulates in the vicinity of the blind spot  
information system sensor.  
●
Comes on when the temperature of the  
blind spot information system sensor is  
high.  
●
The system will return to normal when the  
temperature cools down.  
2 Blind Spot Information System* P. 545  
●
●
Lights up in green when Road Departure  
Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot  
information system* are on.  
2 Road Departure Mitigation system On and Off  
P. 640  
Lights up in green and gray when Road  
Departure Mitigation system, CMBSTM, Low  
Speed Braking Control*, blind spot  
information system* or any two or three of  
these systems are off.  
Lights up in gray when Road Departure  
Mitigation system, CMBSTM, Low Speed  
Braking Control* and blind spot  
Safety Support  
Indicator (Green/  
Gray)  
2 Blind Spot Information System On and Off  
P. 547  
2 System On and Off P. 568, 573  
2 CMBSTM On and Off P. 557  
●
information system* are off.  
* Not available on all models  
117  

Related Topics

Instrument Panel
Gauges and Driver Information Interface

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot