2011-2015 Honda CR-V SUV Controls -> Operating the Switches Around the Steering Wheel User Manual

MY CAR USER MANUAL

Controls -> Operating the Switches Around the Steering Wheel for Your Honda CR-V SUV Fourth Generation (2011-2015)

Opening and Closing the Tailgate  
Precautions for Opening/Closing the Tailgate  
1Precautions for Opening/Closing the Tailgate  
Always make sure individuals and objects are clear of the tailgate before opening or  
closing it.  
Be careful not to hit your head on the tailgate or to  
put your hands between the tailgate and the cargo  
area when closing the tailgate.  
■
Opening the tailgate  
• Open the tailgate all the way.  
u If it is not fully opened, the tailgate may begin to close under its own weight.  
• Be careful when it is windy. The wind may cause the tailgate to close.  
When you are storing or picking up luggage from the  
cargo area while the engine is idling, do not stand in  
front of the exhaust pipe. You may get burned.  
■
Closing the tailgate  
Do not allow any passenger in the cargo space. They  
may get hurt during hard braking, a sudden  
acceleration, or a crash.  
Keep the tailgate closed while driving to:  
u Avoid possible damage.  
u Prevent exhaust gas from leaking into the vehicle.  
2 Carbon Monoxide Gas P. 67  
140  
 
uuOpening and Closing the TailgateuPrecautions for Opening/Closing the Tailgate  
1Using the Tailgate Release Button  
Using the Tailgate Release Button  
■
Do not leave the key, remote transmitter*, or smart  
entry remote* in the luggage area before closing the  
tailgate.  
When all the doors are unlocked or press the  
tailgate unlock button on the remote  
transmitter, the tailgate is unlocked.  
Models with smart entry system  
Models without power tailgate  
Press the tailgate release button and lift open  
the tailgate.  
Even if you are not carrying the smart entry remote,  
you can lock/unlock the tailgate while someone else  
with the remote is within range.  
Models with power tailgate  
Models with power tailgate  
Release Button  
Press the tailgate release button for more than  
one second, and wait until you hear two  
beeps before you lift open the tailgate.  
u Releasing the release button within one  
second with one beep enables the power  
tailgate operations.  
You can change the power tailgate operation setting  
on and off.  
2 Customized Features P. 114  
2 Opening/Closing the Power Tailgate*  
P. 143  
Models with smart entry system  
If you are carrying the smart entry remote, you  
do not have to unlock the tailgate before  
opening it.  
* Not available on all models  
Continued  
141  
 
uuOpening and Closing the TailgateuPrecautions for Opening/Closing the Tailgate  
To close the tailgate, grab the inner handle,  
pull the tailgate down, and push it closed  
from outside.  
Inner Handle  
1Using the Remote Transmitter*  
Using the Remote Transmitter*  
■
If you have unlocked and opened the tailgate using  
the remote transmitter* or smart entry remote*,  
when closing, the tailgate locks automatically.  
Press the tailgate unlock button to unlock the  
tailgate.  
Tailgate  
Unlock  
Button  
Tailgate  
Unlock  
Button  
* Not available on all models  
142  
 
uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*  
Opening/Closing the Power Tailgate*  
1Opening/Closing the Power Tailgate*  
The power tailgate can be operated by pressing the power tailgate button on the  
remote transmitter, pressing the power tailgate button in the driver side control  
panel, or pressing the button on the tailgate.  
3
WARNING  
Closing a power tailgate while anyone is in  
the path of the tailgate can cause serious  
injury.  
■
The power tailgate can be opened when:  
• The tailgate is fully closed.  
• The shift lever is in (P  
.
Make sure everyone is clear before closing  
the power tailgate.  
■
The power tailgate can be closed when:  
• The tailgate is fully open.  
• The shift lever is in (P  
.
NOTICE  
Do not push or pull on the power tailgate when it is  
being automatically opened or closed.  
Forcibly opening or closing the power tailgate while  
in operation can deform the tailgate frame.  
When operating the power tailgate, make sure there  
is enough space around your vehicle. People near the  
tailgate may be seriously hurt if the tailgate hits or  
closes on their heads. Be especially cautious if  
children are around.  
The power tailgate may not open or close under the  
following conditions:  
•
You start the engine while the tailgate is  
automatically opening or closing.  
•
•
•
The vehicle is parked on a steep hill.  
The vehicle is swayed in a strong wind.  
The tailgate or the roof is covered with snow or ice.  
If you close the power tailgate with all the doors  
locked, the power tailgate locks automatically.  
* Not available on all models  
Continued  
143  
 
uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*  
1Opening/Closing the Power Tailgate*  
Remote Transmitter  
■
If you close the power tailgate when all the doors are  
locked, the power tailgate locks automatically.  
Press the power tailgate button for more than  
one second to operate when the power mode  
is in VEHICLE OFF (LOCK).  
If you replace the battery or the power tailgate fuse  
while the tailgate is open, the power tailgate may be  
disabled. The power tailgate resumes once you  
manually close the tailgate.  
To reverse direction while the power tailgate is  
in operation, press the button again. The  
beeper sounds three times and the tailgate  
reverses direction.  
Power  
Tailgate  
Button  
Installing aftermarket components other than  
genuine Honda accessories on the power tailgate  
may prevent it from fully opening or closing.  
■
Customizing when to open the tailgate  
Make sure the power tailgate is fully open before you  
get your luggage in and out.  
ANYTIME: The power tailgate unlocks and opens at the same time. This is the  
default setting.  
WHEN UNLOCKED: The tailgate opens when all doors are unlocked.  
2 Customized Features P. 100, 114  
Make sure the power tailgate is fully closed before  
you start the vehicle.  
The beeper sounds when you start driving while the  
power tailgate is still open, or closing.  
* Not available on all models  
144  
uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*  
1Opening/Closing the Power Tailgate*  
Power Tailgate Button  
■
If the power tailgate meets resistance while opening  
or closing, the auto reverse feature reverses the  
direction. The beeper sounds three times.  
To open: Press and hold the tailgate button in  
the driver side control panel for about one  
second.  
The auto reverse function stops sensing when the  
tailgate is almost closed to make sure that it fully  
closes.  
u Some exterior lights flash and the beeper  
sounds.  
To close: Press and hold the tailgate button in  
the driver side control panel for about one  
second.  
u Some exterior lights flash and the beeper  
sounds.  
Do not touch the sensors located on both sides of the  
tailgate. The power tailgate does not close if you  
touch either sensor when you are trying to close the  
tailgate.  
Be careful not to scratch the sensors with a sharp  
object. If scratched, they can be damaged, and the  
power tailgate closing feature malfunctions.  
To reverse direction while the power tailgate is  
in operation, press the button again.  
1Power Tailgate Close Button  
Power Tailgate Close Button  
■
If you press the tailgate release button inside the  
handle while the tailgate is automatically opening or  
closing, the power tailgate operation stops. Use  
caution if the tailgate stops in the middle of either  
operation. It may suddenly swing up or down.  
Press the button on the tailgate to close the  
power tailgate.  
If you press the button again while the power  
tailgate is closing, it stops and reverses  
direction.  
* Not available on all models  
Continued  
145  
 
uuOpening and Closing the TailgateuOpening/Closing the Power Tailgate*  
1Auto-Closer  
Auto-Closer  
■
The auto-closer feature does not activate if you push  
the tailgate open button while the power tailgate is  
closing.  
If you manually close the power tailgate, it latches automatically.  
Do not put any force on the tailgate while the power  
tailgate is latching.  
Keep your hands away from the tailgate when you  
manually close the tailgate and let it latch  
automatically. It is dangerous to put your hands  
around the tailgate as it starts to latch itself.  
1Power Tailgate Fall Detection  
Power Tailgate Fall Detection  
■
If you try to manually close the power tailgate  
immediately after it fully opens, the power tailgate  
fall detection may activate  
Automatically lowers the power tailgate when there is a possibility that the fully  
opened power tailgate can fall down by its own weight (for example, by snow on  
the tailgate). The beeper sounds while the power tailgate lowers.  
Once the power tailgate fall detection activates, wait  
until the power tailgate fully closes. Keep away from  
the power tailgate when it is in motion.  
If the power tailgate fall detection constantly  
activates, consult at a dealer.  
146  
   
Security System  
Immobilizer System  
The immobilizer system prevents a key that has not been pre-registered from  
starting the engine. Each key contains electronic transmitters that use electronic  
signals to verify the key.  
1Immobilizer System  
NOTICE  
Leaving the ignition key in the vehicle can result in  
theft or accidental movement of the vehicle.  
Always take the ignition key with you whenever you  
leave the vehicle unattended.  
Pay attention to the following when inserting the key into the ignition switch or  
pressing the ENGINE START/STOP button*:  
• Do not allow objects that emit strong radio waves near the ignition switch*1.  
• Make sure the key is not covered by or touching a metal object.  
• Do not bring a key from another vehicle's immobilizer system near the ignition  
switch.  
Do not alter the system or add other devices to it.  
Doing so may damage the system and make your  
vehicle inoperable.  
Security System Alarm*  
The security system alarm activates when the tailgate, hood or doors are forcibly  
opened. The alarm does not go off if the tailgate or doors are opened with the key,  
remote transmitter or smart entry system.  
1Security System Alarm*  
The security alarm continues for a maximum of two  
minutes until the security system deactivates.  
However, the alarm goes off when a door is opened with the key, then the shift  
lever is moved out of (P or the hood is opened before the power mode is set to ON.  
■
When the security system alarm activates  
The horn sounds intermittently and all the exterior lights flash.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
Continued  
147  
   
uuSecurity SystemuSecurity System Alarm*  
1Security System Alarm*  
■
To deactivate the security system alarm  
Unlock the vehicle using the remote transmitter or smart entry system. The system,  
along with the horn and flashing lights, is deactivated.  
Do not set the security system alarm when someone  
is in the vehicle or a window is open. The system can  
accidentally activate when:  
•
•
•
Unlocking the door with the lock tab.  
Opening the hood with the hood release handle.  
■
Setting the security system alarm  
The security system alarm automatically sets when the following conditions have  
been met:  
Moving the shift lever out of (P  
.
• The power mode is set to VEHICLE OFF (LOCK).  
• The hood and tailgate are closed.  
• All doors and tailgate are locked with the key or the remote transmitter.  
If the battery goes dead after you have set the  
security system alarm, the security alarm may go off  
once the battery is recharged or replaced.  
If this occurs, deactivate the security system alarm by  
unlocking a door using the key or remote transmitter.  
■
When the security system alarm sets  
The security system alarm indicator in the instrument panel blinks. When the  
blinking interval changes after about 15 seconds, the security system alarm is set.  
Do not attempt to alter this system or add another  
device to it.  
■
To cancel the security system alarm  
The security system is canceled when the vehicle is unlocked using the remote  
transmitter, or smart entry system, or the power mode is set to ON. The security  
system indicator goes off at the same time.  
* Not available on all models  
148  
uuSecurity SystemuSecurity System Alarm*  
Panic Mode  
■
■
The panic button on the remote  
transmitter  
If you press the panic button for  
approximately one second, the following will  
occur for about 30 seconds:  
• The horn sounds.  
• Some exterior lights flash.  
Panic  
Button  
Panic  
Button  
■
Canceling panic mode  
Press any button on the remote transmitter, or turn the ignition switch to ON (w*1  
.
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
149  
Opening and Closing the Windows  
Opening/Closing the Power Windows  
The power windows can be opened and closed when the ignition switch is in ON  
(w*1, using the switches on the doors. The driver side switches can be used to open  
and close all the windows.  
1Opening/Closing the Power Windows  
3
WARNING  
Closing a power window on someone's  
hands or fingers can cause serious injury.  
The power window lock button on the driver side must be switched off (not pushed  
in, indicator off) to open and close the windows from anywhere other than the  
driver's seat.  
Make sure your passengers are away from  
the windows before closing them.  
When the power window lock button is switched on (pushed in, indicator on), you  
can only operate the driver's window. Turn the power window lock button on if a  
child is in the vehicle.  
The power windows can be operated for up to 10  
minutes after you turn the ignition switch off.  
Opening either front door cancels this function.  
Opening/Closing Windows with Auto-Open/Close Function  
■
Auto Reverse  
If a power window senses resistance when closing  
automatically, it stops closing and reverse direction.  
■
Automatic operation  
ON  
To open: Push the switch down firmly.  
To close: Pull the switch up firmly.  
OFF  
Power Window  
Lock Button  
The driver’s window auto reverse function is disabled  
when you continuously pull up the switch.  
The window opens or closes completely. To  
stop the window at any time, push or pull the  
switch briefly.  
Driver’s  
Window  
Switch  
The auto reverse function stops sensing when the  
window is almost closed to ensure that it fully closes.  
Indicator  
Front Passenger’s  
Window Switch  
■
Manual operation  
To open: Push the switch down lightly, and  
hold it until the desired position is reached.  
To close: Pull the switch up lightly, and hold it  
until the desired position is reached.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
150  
 
uuOpening and Closing the WindowsuOpening/Closing the Power Windows  
Opening/Closing Windows without Auto-Open/Close Function  
■
To open: Push the switch down.  
To close: Pull the switch up.  
Close  
Release the switch when the window reaches  
the desired position.  
Open  
151  
Opening and Closing the Moonroof*  
1Opening/Closing the Moonroof  
Opening/Closing the Moonroof  
■
You can operate the moonroof when the ignition switch is in ON (w*1. Use the  
switch in the front of the ceiling to open and close the moonroof.  
3
WARNING  
Opening or closing the moonroof on  
someone's hands or fingers can cause  
serious injury.  
■
Automatic operation  
To open: Pull the switch back firmly.  
To close: Push the switch forward firmly.  
Open  
Tilt  
Make sure all hands and fingers are clear of  
the moonroof before opening or closing it.  
The moonroof automatically opens or closes  
all the way. To stop the moonroof midway,  
touch the switch briefly.  
Close  
NOTICE  
Opening the moonroof in below freezing  
temperature or when it is covered with snow or ice  
can damage the moonroof panel or motor.  
■
Manual operation  
To open: Pull the switch back lightly, and  
hold it until the desired position is reached.  
To close: Push the switch forward lightly, and  
hold it until the desired position is reached.  
The power moonroof can be operated for up to 10  
minutes after you turn the ignition switch off.  
Opening either front door cancels this function.  
■
Tilting the moonroof up  
When resistance is detected, the auto reverse  
function causes the moonroof to change directions,  
then stop. Auto reverse stops sensing when the  
moonroof is almost closed to ensure that it fully  
closes.  
To tilt: Push on the center of the moonroof  
switch.  
To close: Push the switch forward firmly, then  
release.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
152  
 
Operating the Switches Around the Steering Wheel  
Models with ignition Keys with remote transmitter  
Ignition Switch  
1Ignition Switch  
You cannot take the key out unless the shift lever is  
in (P  
.
If you open the driver's door when the key is in LOCK  
(0 or ACCESSORY (q, a warning buzzer will sound  
to remind you to take the key out.  
(0 LOCK: Insert and remove the key in this  
position.  
(q ACCESSORY: Operate the audio system and  
other accessories in this position.  
If the key won't turn from LOCK (0 to ACCESSORY  
(q, turn the key while moving the steering wheel left  
and right. The steering wheel will unlock, allowing  
the key to turn.  
(w ON: This is the position when driving.  
(e START: This position is for starting the engine.  
The switch returns to ON (w when you let go of  
the key.  
153  
 
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
Models with smart entry remote  
ENGINE START/STOP Button  
1ENGINE START/STOP Button  
ENGINE START/STOP Button Operating Range  
Changing the Power Mode  
■
Operating Range  
VEHICLE OFF (LOCK)  
Indicator in the button is off.  
The steering wheel is locked*1.  
Indicator  
The power to all electrical  
components is turned off.  
ACCESSORY  
Indicator in the button is on.  
Indicator in the button blinks  
(from ON to ACCESSORY).  
Operate the audio system and  
other accessories in this position.  
You can start the engine when the smart entry  
remote is inside the vehicle.  
The engine may also run if the smart entry remote is  
close to the door or window, even if it is outside the  
vehicle.  
ON mode:  
ON  
Indicator in the button is off, if the engine is running.  
Indicator in the button is on.  
All electrical components can be  
used.  
If the smart entry remote battery is weak, beeper  
sounds and the TO START, HOLD REMOTE NEAR  
START BUTTON message appears on the i-MID.  
2 If the Smart Entry Remote Battery is Weak  
P. 492  
Without pressing  
the brake pedal  
Press the button without  
the shift lever in (P  
Press the button.  
.
U.S. models  
Shift to (P  
Do not leave the power mode in ACCESSORY or ON  
when you get out.  
Shift to (P then press the  
.
button.  
*1:Canadian models  
154  
 
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
1ENGINE START/STOP Button  
Automatic Power Off  
■
Canadian models  
If you leave the vehicle for 30 to 60 minutes with the shift lever in (P and the power  
mode in ACCESSORY, the vehicle automatically goes into the mode similar to  
VEHICLE OFF (LOCK) to avoid the battery drain.  
If the power mode does not change from VEHICLE  
OFF to ACCESSORY, press the ENGINE START/STOP  
button while moving the steering wheel left and  
right. The steering wheel will unlock, allowing the  
mode to change.  
Canadian models  
When in this mode:  
The steering wheel does not lock.  
You cannot lock or unlock doors with the remote transmitter or the smart entry  
system.  
Press the ENGINE START/STOP button three times to switch the mode to VEHICLE  
OFF (LOCK).  
Continued  
155  
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
Power Mode Reminder  
■
If you open the driver’s door when the power mode is set to ACCESSORY, a warning  
buzzer sounds.  
Smart Entry Remote Reminder  
■
1Smart Entry Remote Reminder  
When the smart entry remote is within the system’s  
operational range, and the driver’s door is closed, the  
warning function cancels.  
Warning buzzers may sound from inside or/  
Models without multi-information  
display  
and outside the vehicle to remind you that the  
smart entry remote is out of the vehicle. If the  
buzzer continues even after the remote is put  
back inside, place it within its operational  
range.  
If the smart entry remote is taken out of the vehicle  
after the engine has been started, you can no longer  
change the ENGINE START/STOP button mode or  
restart the engine. Always make sure if the remote is  
in your vehicle when you operate the ENGINE  
START/STOP button.  
■
When the power mode is in ON  
If the smart entry remote is taken out of the  
vehicle, and the driver’s door is closed,  
warning buzzers sound from both inside and  
outside the vehicle. A warning message on  
the information display/multi-information  
display notifies the driver inside that the  
remote is out.  
Models with multi-information display  
Removing the smart entry remote from the vehicle  
through a window does not activate the warning  
buzzer.  
Do not put the smart entry remote on the dashboard  
or in the glove box. It may cause the warning buzzer  
to go off. Under some other conditions that can  
prevent the vehicle from locating the remote, the  
warning buzzer may also go off even if the remote is  
within the system’s operational range.  
■
When the power mode is in  
ACCESSORY  
If the smart entry remote is taken out of the  
vehicle, and all the doors are closed, a  
warning buzzer sounds from outside the  
vehicle.  
156  
 
uuOperating the Switches Around the Steering WheeluIgnition Switch and Power Mode Comparison  
Ignition Switch and Power Mode Comparison  
Ignition Switch  
Position  
LOCK (0)  
(with/without  
the key)  
ACCESSORY (I)  
ON (II)  
START (III)  
●
●
●
●
Without Smart Entry  
System  
Engine is turned off and  
power is shut down.  
The steering wheel is  
locked.  
No electrical  
components can be  
used.  
Engine is turned off.  
Some electrical  
components such as the  
audio system can be  
operated.  
Normal key position  
while driving.  
All electrical components  
can be used.  
Use this position to start  
the engine.  
The ignition switch  
returns to the ON (II)  
position when you  
release the key.  
●
●
●
●
●
Power Mode  
VEHICLE OFF  
(LOCK)  
ACCESSORY  
ON  
START  
Indicator is:  
On  
Off  
With Smart Entry  
System and ENGINE  
START/STOP  
Button  
Indicator-Off  
Engine is turned off and  
Indicator-On or blinking  
Indicator-  
Indicator-Off  
The mode automatically  
returns to ON after the  
engine starts.  
●
●
●
Engine is turned off.  
Some electrical  
On (engine is turned off)  
Off (engine is running)  
●
power is shut down.  
The steering wheel is  
locked*1.  
●
●
components such as the  
audio system can be  
operated.  
All electrical components  
can be used.  
●
No electrical  
components can be  
used.  
*1:Canadian models  
157  
uuOperating the Switches Around the Steering WheeluTurn Signals  
Turn Signals  
The turn signals can be used when the ignition  
switch is in ON (w*1  
Right Turn  
.
■
One-touch turn signal  
When you lightly push up or down and release  
the turn signal lever, the exterior turn signals  
and turn signal indicator blink three times.  
Left Turn  
This feature can be used when signaling for a  
lane change.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
158  
uuOperating the Switches Around the Steering WheeluLight Switches  
Light Switches  
1Light Switches  
Manual Operation  
■
Models without smart entry system  
Rotating the light switch turns the lights on  
and off, regardless of the position of the  
ignition switch.  
If you remove the key from the ignition switch with  
the lights on, a light on reminder chime sounds when  
you open the driver's door.  
High Beams  
■
High beams  
Push the lever forward until you hear a click.  
Low beams  
Models with smart entry system  
If you leave the power mode in VEHICLE OFF (LOCK)  
while the lights are on, a chime sounds when the  
driver’s door is opened.  
■
When in high beams, pull the lever back to  
return to low beams.  
Flashing the high beams  
Low Beams  
■
Flashing the high beams  
All models  
Turns on parking, side marker,  
tail, and rear license plate lights  
Pull the lever back, and release it.  
Do not leave the lights on when the engine is off  
because it will cause the battery to discharge.  
Turns on headlights, parking,  
side marker, tail, and rear  
license plate lights  
Continued  
159  
 
uuOperating the Switches Around the Steering WheeluLight Switches  
1Automatic Lighting Control*  
Automatic Lighting Control*  
■
We recommend that you turn on the lights manually  
when driving at night, in a dense fog, or in dark areas  
such as long tunnels or parking facilities.  
Automatic lighting control can be used when  
the power mode is in ON.  
The light sensor is in the location shown below.  
Do not cover this light sensor with anything;  
otherwise, the automatic lighting system may not  
work properly.  
When you turn the light switch to AUTO, the  
headlights and other exterior lights will switch  
on and off automatically depending on the  
ambient brightness.  
u You can change the auto light sensitivity  
Models without automatic  
intermittent wipers  
setting.  
2 Customized Features P. 114  
Light Sensor  
Headlight Integration with Wipers*  
■
The headlights automatically come on when the wipers are used several times within  
a certain interval with the headlight switch in AUTO.  
The headlights automatically go off a few minutes later if the wipers are stopped.  
Models with automatic  
intermittent wipers  
Light Sensor  
* Not available on all models  
160  
 
uuOperating the Switches Around the Steering WheeluLight Switches  
1Automatic Lighting Control*  
Automatic Lighting Off Feature  
■
Adjust the auto light sensitivity as follows:  
The headlights, all other exterior lights, and the instrument panel lights turn off 15  
seconds after you remove the key or set the power mode to VEHICLE OFF (LOCK),  
take the remote with you, and close the driver’s door.  
u You can change the headlight auto off timer setting.  
2 Customized Features P. 114  
Setting  
The exterior lights come on  
when the ambient light is at  
Max  
High  
Mid  
Low  
Min  
Bright  
Dark  
If you turn the ignition switch to LOCK (0*1 with the headlight switch on, but do  
not open the door, the lights turn off after 10 minutes (three minutes, if the switch  
is in the AUTO position).  
The lights turn on again when you unlock or open the driver's door. If you unlock  
the door, but do not open it within 15 seconds, the lights go off. If you open the  
driver's door, you will hear a lights on reminder chime.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
161  
uuOperating the Switches Around the Steering WheeluFog Lights*  
Fog Lights*  
Can be used when the low beam headlights  
1Fog Lights*  
are on.  
When the fog lights are on, the indicator in the  
instrument panel will be on.  
The fog lights go off when the headlights turn off, or  
when the daytime running lights are on.  
Rotate the switch up from the OFF position to  
the  
position.  
Fog Light Switch  
* Not available on all models  
162  
 
uuOperating the Switches Around the Steering WheeluDaytime Running Lights  
Daytime Running Lights  
Models without smart entry system  
The high beam headlights come on slightly dimmer than normal when the following  
conditions have been met:  
• The ignition switch is in ON (w  
• The headlight switch is off.  
• The parking brake is released.  
.
The lights remain on even if you set the parking brake. Turning off the ignition  
switch will turn off the daytime running lights.  
The high beam headlights return to the original brightness once the headlight  
switch is turned on.  
Models with smart entry system  
The daytime running lights come on when the following conditions have been met:  
• The power mode is set to ON.  
• The headlight switch is off.  
• The parking brake is released.  
The lights remain on even if you set the parking brake. Setting the power mode to  
VEHICLE OFF turns off the daytime running lights.  
The daytime running lights are off the headlight switch is turned on, or when the  
headlight switch is in AUTO and it is getting darker outside.  
163  
uuOperating the Switches Around the Steering WheeluWipers and Washers  
Wipers and Washers  
1Wipers and Washers  
Windshield Wipers/Washers  
■
NOTICE  
The windshield wipers and washers can be  
used when the ignition switch is in ON (w*1  
Do not use the wipers when the windshield is dry.  
The windshield will get scratched, or the rubber  
blades will get damaged.  
.
■
MIST  
The wipers run at high speed until you release  
the lever.  
NOTICE  
Pull to  
use  
washer.  
In cold weather, the blades may freeze to the  
windshield, becoming stuck.  
Operating the wipers in this condition may damage  
the wipers. Use the defroster to warm the  
windshield, then turn the wipers on.  
■
Wiper switch (OFF, INT*, LO, HI)  
Change the wiper switch setting according to  
the amount of rain.  
Intermittent Time  
Adjustment Ring*  
Turn the washers off if no washer fluid comes out.  
The pump may get damaged.  
■
AUTO*  
2 Automatic Intermittent Wipers* P. 165  
MIST  
OFF  
Models with intermittent time adjustment ring  
If the vehicle speeds up while the wipers are  
operating intermittently, the length of the wipe  
interval shortens. When the vehicle starts moving, the  
wipers make a single sweep.  
When the vehicle speeds up, the wiper operation’s  
shortest delay setting ( ) and the LO setting become  
the same.  
Adjusting the delay*  
INT*: Low speed with  
intermittent  
■
Turn the adjustment ring to adjust the wiper  
delay.  
AUTO*: Automatic  
intermittent operation  
Long delay  
LO: Low speed wipe  
HI: High speed wipe  
Short delay  
If the wiper stops operating due to any obstacle such  
as the build-up of snow, park the vehicle in a safe  
place. Rotate the wiper switch to OFF, and turn the  
■
Washer  
Sprays while you pull the lever toward you.  
When you release the lever, the wipers make  
two or three more sweeps before stopping.  
ignition switch to ACCESSORY (q or LOCK (0*1  
,
then remove the obstacle.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
164  
 
uuOperating the Switches Around the Steering WheeluWipers and Washers  
1Wipers and Washers  
Automatic Intermittent Wipers*  
■
The wiper motor may stop motor operation  
When you push the lever down to AUTO, the  
windshield wipers sweep once, and go into  
the automatic mode.  
temporarily to prevent an overload. Wiper operation  
will return to normal within a few minutes, once the  
circuit has returned to normal.  
1Automatic Intermittent Wipers*  
The wipers operate intermittently, at low  
speed, or at high speed and stops in  
accordance with the amount of rainfall the  
rainfall sensor detects.  
The rainfall sensor is in the location shown below.  
Rainfall Sensor  
Adjustment Ring  
■
AUTO sensitivity adjustment  
When in AUTO, you can also adjust the  
rainfall sensor sensitivity using the adjustment  
ring.  
Sensor sensitivity  
Do not put the wiper lever in AUTO when cleaning  
the windshield or driving through a car wash. If the  
wiper lever is in AUTO, and the power mode is in ON,  
the rainfall sensor may respond to your hand or car  
wash liquids, and the wipers may operate  
automatically.  
Low: The wipers start to  
react to a larger amount  
of rainfall.  
High: The wipers start to  
react to a smaller amount  
of rainfall.  
* Not available on all models  
Continued  
165  
 
uuOperating the Switches Around the Steering WheeluWipers and Washers  
Rear Wiper/Washer  
■
The rear wiper and washer can be used when  
the ignition switch is in ON (w*1  
.
■
Wiper switch (OFF, INT, ON)  
Change the wiper switch setting according to  
the amount of rain.  
■
Washer (  
)
Sprays while you rotate the switch to this  
position.  
Hold it to activate the wiper and to spray the  
washer. Once released, it stops operating  
after a few more sweeps.  
INT: Intermittent  
ON: Continuous wipe  
OFF  
Washer  
■
Operating in reverse  
When you shift the transmission to (R with the windshield wipers activated, the rear  
wiper operates automatically as follows even if its switch is off.  
Front Wiper Position  
Rear Wiper Operation  
INT (Intermittent)  
Intermittent  
LO (Low speed wipe)  
HI (High speed wipe)  
Continuous  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
166  
uuOperating the Switches Around the Steering WheeluBrightness Control  
Brightness Control  
When the parking lights are turned on and the  
1Brightness Control  
ignition switch is in ON (w*1, you can use the  
brightness control knob to adjust instrument  
panel brightness.  
Instrument panel brightness differs between when  
the exterior lights are on and when they are off. The  
instrument panel dims to reduce glare when the  
lights are on.  
Brighten: Turn the knob to the right.  
Dim: Turn the knob to the left.  
Pressing the  
(Select/Reset) knob changes to a  
different display.  
You will hear a beep when the brightness  
reaches minimum or maximum. The  
information display will return to its original  
state several seconds after you adjust the  
brightness.  
Control Knob  
If you turn the knob to the right until the brightness  
display is up to max, the beeper sounds. This cancels  
the reduced instrument panel brightness when the  
exterior lights are on.  
■
Brightness level indicator  
Models without multi-information  
display  
The brightness level is shown on the  
information display while you are adjusting it.  
Models with multi-information display  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
167  
 
uuOperating the Switches Around the Steering WheeluDefogger/Heated Door Mirror*  
Defogger/Heated Door Mirror*  
1Rear Defogger/Heated Door Mirror* Button  
Rear Defogger/Heated Door Mirror* Button  
■
NOTICE  
Press the rear defogger and heated door mirror button to defog the rear window  
and mirrors when the ignition switch is in ON (w*1  
When cleaning the inside of the rear window, be  
careful not to damage the heating wires.  
It is critical to wipe the window from side to side  
along the defogger heating wires.  
.
Models with heating and cooling system  
The rear defogger and heated door mirrors  
automatically switch off after 20 minutes.  
However, if the outside temperature is 18°F  
(−8°C) or below, they do not automatically  
switch off.  
This system consumes a lot of power, and may  
weaken the battery, making it difficult to start the  
engine. Turn it off when the window has been  
defogged.  
Also, do not use the system for a long period even if  
the engine is idling.  
Models with climate control system  
The rear defogger and heated door mirrors  
automatically switch off after 10-30 minutes  
depending on the outside temperature.  
However, if the outside temperature is 32°F  
(0°C) or below, they do not automatically  
switch off.  
*1: Models with the smart entry system have an ENGINE START/STOP button  
instead of an ignition switch.  
* Not available on all models  
168  
 
uuOperating the Switches Around the Steering WheeluDefogger/Heated Door Mirror*  
Canadian models  
1Heated Windshield Button*  
This system consumes a lot of power, and may  
weaken the battery, making it difficult to start the  
engine. Turn it off when the window has been  
defogged.  
Heated Windshield Button*  
■
Press the heated windshield button to deice  
the windshield when the power mode is in  
Also, do not use the system for a long period even if  
the engine is idling.  
ON.  
The front defogger automatically switches off  
after 15 minutes.  
* Not available on all models  
169  
 
uuOperating the Switches Around the Steering WheeluDriving Position Memory System*  
Driving Position Memory System*  
You can store two driver’s seat positions (except for power lumbar) with the driving  
position memory system.  
When you unlock and open the driver’s door with a remote transmitter or the smart  
entry system, the seat adjusts automatically to one of the two preset positions.  
• DRIVER 1 transmitter is linked to memory button 1.  
• DRIVER 2 transmitter is linked to memory button 2.  
DRIVER 1  
DRIVER 2  
* Not available on all models  
170  
uuOperating the Switches Around the Steering WheeluDriving Position Memory System*  
1Storing a Position in Memory  
Storing a Position in Memory  
■
After you press the SET button, the storing operation  
will be canceled when:  
1. Set the power mode to ON. Adjust the  
driver’s seat to the desired position.  
2. Press the SET button.  
•
•
•
You do not press the memory button within five  
seconds.  
You readjust the seat position before the double-  
beep.  
You set the power mode to any position except  
ON.  
Memory  
Button 1  
u You will hear a beep, and the memory  
button indicator light will blink.  
3. Press and hold memory button (1 or (2  
within five seconds of pressing the SET  
button.  
u Once the seat position has been  
memorized, the indicator light on the  
button you pressed stays on.  
Memory  
Button 2  
SET Button  
1Recalling the Stored Position  
Recalling the Stored Position  
■
The seat will stop moving if you:  
1. Move the shift lever to (P  
2. Apply the parking brake.  
3. Press a memory button ((1 or (2).  
u You will hear a beep, and the indicator  
light will blink.  
.
•
Press the SET button, or a memory button ((1 or  
(2).  
Memory  
•
•
Adjust the seat position.  
Shift into any position except (P  
Button 1  
.
Memory  
Button 2  
The seat will automatically move to the  
memorized position. When it has finished  
moving, you will hear a beep, and the  
indicator light stays on.  
171  
   
uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel  
Adjusting the Steering Wheel  
The steering wheel height and distance from your body can be adjusted so that you  
can comfortably grip the steering wheel in an appropriate driving posture.  
1Adjusting the Steering Wheel  
3
WARNING  
1. Pull the steering wheel adjustment lever up.  
u The steering wheel adjustment lever is  
under the steering column.  
To adjust  
Adjusting the steering wheel position while  
driving may cause you to lose control of the  
vehicle and be seriously injured in a crash.  
2. Move the steering wheel up or down, and  
in or out.  
u Make sure you can see the instrument  
panel gauges and indicators.  
Adjust the steering wheel only when the  
vehicle is stopped.  
3. Push the steering wheel adjustment lever  
To lock  
Lever  
down to lock the steering wheel in position.  
u After adjusting the position, make sure  
you have securely locked the steering  
wheel in place by trying to move it up,  
down, in, and out.  
Make any steering wheel adjustments before you  
start driving.  
172  
 

Related Topics

Controls

Locking and Unlocking the Doors
Adjusting the Mirrors
Adjusting the Seats
Heating and Cooling System
Climate Control System