2009-2015 Honda Jazz 4 Door Comfort and Convenience Features User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Comfort and Convenience Features for Your Honda Jazz 4 Door Second Generation (2009-2015)

07/09/12 09:30:08 32SAA650_150  
Comfort and Convenience Features  
The heating and air conditioning＊  
Heating and Cooling ..................... 148  
What Each Control Does.......... 148  
How to Use the System............. 152  
To Turn Everything Off ........... 156  
Climate Control System................ 157  
Fully-automatic Operation........ 160  
Semi-automatic Operation........ 161  
Sunlight Sensor/Temperature  
systems in your vehicle provide a  
comfortable driving environment in  
all weather conditions.  
＊Air conditioning is standard on  
some models.  
The audio system that is standard  
equipment on some models has  
many features. This section de-  
scribes those features and how to  
use them. (If you selected an  
optional audio system, refer to the  
operating instructions that came  
with it.)  
Sensor ..................................... 166  
Audio System ................................. 167  
Audio System (A type).................. 169  
Audio System (B type).................. 180  
Audio System (C type).................. 197  
Audio System (D type) ................. 214  
Protecing Compact Discs ......... 225  
Remote Audio Controls ............ 226  
Auxiliary Input Jack................... 227  
147  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:18 32SAA650_151  
Heating and Cooling  
Proper use of the heating and  
FRESH AIR/RECIRCULATION  
LEVER  
REAR WINDOW  
DEMISTER BUTTON  
AIR CONDITIONING  
BUTTON  
cooling system can make the interior  
dry and comfortable, and keep the  
windows clear for the best visibility.  
If your vehicle does not have air  
conditioning, it can be installed at  
any time. Your dealer can install a  
genuine Honda air conditioning  
system that meets Honda’s high  
quality standards and is designed to  
exactly fit your vehicle. Please  
contact your dealer for more  
information.  
TEMPERATURE CONTROL  
DIAL  
MODE CONTROL  
DIAL  
FAN CONTROL  
DIAL  
What Each Control Does  
Fan Control Dial  
Air Conditioning (A/C) Button  
(For some types)  
This button turns the air condi-  
tioning ON and OFF. The indicator  
in the button lights when the A/C is  
on.  
Rear Window Demister Button  
This button turns the rear window  
demister on and off (see page 106 ).  
Turning this dial clockwise increases  
the fan’s speed, which increases air  
flow.  
Temperature Control Dials  
Turning this dial clockwise increases  
the temperature of the air flow.  
148  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:30 32SAA650_152  
Heating and Cooling  
Fresh Air/Recirculation Lever  
This lever controls the source of the  
air going into the system. When you  
Air flows from the centre  
and corner vents in the dashboard.  
select the  
side, air is brought  
Air flow is divided between  
the vents in the dashboard and the  
floor vents.  
in from outside the vehicle (Fresh  
Air mode). When you select the  
side, air from the vehicle’s  
interior is sent through the system  
again (Recirculation mode).  
Air flows from the floor  
vents.  
Mode Control Dial  
Air flow is divided between  
the floor vents and the demister  
vents at the base of the windscreen.  
This dial lets you select which vents  
the air flows from. Some air will flow  
from the dashboard corner vents in  
all modes.  
Air flows from the demister  
vents at the base of the windscreen.  
When you use  
, set the Fresh Air/  
Recirculation Lever to the  
side.  
or  
CONTINUED  
149  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:34 32SAA650_153  
Heating and Cooling  
150  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:41 32SAA650_154  
Heating and Cooling  
Vent Controls  
CENTRE VENTS  
TABS  
DRIVER’S SIDE VENT  
PASSENGER’S SIDE VENT  
Close  
Close  
Open  
Open  
The direction of air flow from the  
vents in the centre and each side of  
the dashboard is adjustable.  
The vents in the corners of the  
dashboard can be opened and closed  
with the dials underneath them.  
To adjust the air flow from each vent,  
move the vent up-and-down and side-  
to-side by the tab.  
151  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:51 32SAA650_155  
Heating and Cooling  
How to Use the System  
It is best to leave the system in Fresh  
Ventilation  
This section covers how to set up the  
system controls for ventilation,  
heating, cooling, dehumidifying, and  
defrosting.  
Air mode under almost all conditions. The flow-through ventilation system  
Keeping the system in Recirculation  
mode, particularly with the A/C off,  
can cause the windows to fog up.  
Switch to Recirculation mode when  
you are driving through smoky or  
dusty conditions, then switch back to  
Fresh Air mode when the conditions  
clear.  
draws in outside air, circulates it  
through the interior, then exhausts it  
through vents near the tailgate.  
The engine must be running for the  
heater and air conditioning to  
generate hot and cold air. The heater  
uses engine coolant to warm the air.  
If the engine is cold, it will be several  
minutes before you feel warm air  
coming from the system.  
1. Turn the temperature control dial  
all the way to the left.  
Make sure the A/C is off.  
2. Select  
and Fresh Air mode.  
3. Set the fan to the desired speed.  
The outside air intakes for the  
heating and cooling system are at  
the base of the windscreen. Keep  
these clear of leaves and other  
debris.  
To Cool with A/C  
(For some types)  
The air conditioning does not rely on  
engine temperature.  
1. Turn on the A/C by pressing the  
button. The light in the button  
comes on when a fan speed is  
selected.  
2. Make sure the temperature  
control dial is all the way to the left.  
3. Select  
.
4. If the outside air is humid, select  
Recirculation mode. If the outside  
air is dry, select Fresh Air mode.  
5. Set the fan to the desired speed.  
152  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:30:58 32SAA650_156  
Heating and Cooling  
If the interior is very warm from  
being parked in the sun, you can cool  
it down more rapidly by setting up  
the controls this way:  
REAR WINDOW  
DEMISTER BUTTON  
AIR CONDITIONING BUTTON  
FRESH AIR/RECIRCULATION LEVER  
1.  
2.  
Start the engine.  
Turn on the A/C by pressing the  
button. Make sure the tempera-  
ture control dial is set to maximum  
cool.  
3.  
4.  
Set the fan to maximum speed.  
Open the windows partially. Select  
and Fresh Air mode.  
When the interior has cooled down  
to a more comfortable temperature,  
close the windows and set the  
controls as described for normal  
cooling.  
TEMPERATURE CONTROL FAN CONTROL DIAL  
DIAL  
MODE CONTROL DIAL  
CONTINUED  
153  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:08 32SAA650_157  
Heating and Cooling  
Air conditioning places an extra load  
on the engine. Watch the High  
Temperature Indicator (see page  
95 ) when driving in stop-and-go  
traffic or climbing a long, steep hill.  
If the indicator begins to blink, turn  
off the A/C until the indicator goes  
off.  
To Heat and Dehumidify with  
Air Conditioning  
To Defog and Defrost  
To remove fog from the inside of the  
windows:  
(For some types)  
Air conditioning, as it cools, removes  
moisture from the air. When used in  
combination with the heater, it  
makes the interior warm and dry.  
1. Switch the fan on.  
2. Turn on the air conditioning (on  
some types).  
3. Select  
and Fresh Air mode.  
1. Switch the fan on.  
2. Turn on the air conditioning.  
4. Adjust the temperature control  
dial so the air flow from the  
To Heat  
To warm the interior:  
3. Select  
and Fresh Air mode.  
defroster vents feels warm.  
5. Turn on the rear window demister  
to help clear the rear window.  
4. Adjust the temperature control  
dial so the mixture of heated and  
cooled air feels comfortable.  
1. Start the engine.  
2. Select  
and Fresh Air mode.  
3. Set the fan to the desired speed.  
4. Adjust the warmth of the air with  
the temperature control dial.  
This setting is suitable for all driving  
conditions whenever the outside  
temperature is above 0°C (32°F).  
154  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:14 32SAA650_158  
Heating and Cooling  
To remove exterior frost or ice from  
the windscreen and side windows  
after the vehicle has been sitting out  
in cold weather:  
REAR WINDOW  
AIR CONDITIONING BUTTON  
DEMISTER BUTTON  
FRESH AIR/RECIRCULATION LEVER  
1. Start the engine.  
2. Select the Fresh Air mode and  
.
3. Switch the fan and temperature  
controls to maximum.  
To rapidly remove exterior frost or  
ice from the windscreen (on very  
cold days), first select the Recircu-  
lation mode. Once the windscreen is  
clear, select the Fresh Air mode to  
avoid fogging the windows.  
MODE CONTROL DIAL  
TEMPERATURE CONTROL  
DIAL  
FAN CONTROL DIAL  
CONTINUED  
155  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:20 32SAA650_159  
Heating and Cooling  
These settings direct all the air flow  
to the demister vents at the base of  
the windscreen and the side window  
demister vents. The air flow will get  
warmer and clear the windows faster  
as the engine warms up. You can  
close the side vents with the dial  
underneath each vent. This will send  
more warm air to the windscreen  
demister vents.  
To Turn Everything Off  
To shut off the system temporarily,  
turn the fan speed and temperature  
control dials all the way to the left.  
You should shut the system  
completely off only for the first few  
minutes of driving in cold weather,  
until the engine coolant warms up  
enough to operate the heater. Keep  
the fan on at all other times so stale  
air does not build up in the interior.  
For safety, make sure you have a  
clear view through all the windows  
before driving away.  
156  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:27 32SAA650_160  
Climate Control System  
Only on vehicles with automatic air  
conditioning system  
CENTRE VENTS  
DRIVER’S SIDE VENT  
The automatic climate control  
system in your vehicle picks the  
proper combination of air  
conditioning, heating, and ventilation  
to maintain the interior temperature  
you select. The system also adjusts  
the fan speed and air flow levels.  
Close  
Open  
TABS  
The direction of air flow from the  
vents in the centre and each side of  
the dashboard is adjustable.  
The vents in the corners of the  
dashboard can be opened and closed  
with the dials underneath them.  
To adjust the air flow from each vent,  
move the vent up-and-down and side-  
to-side by the tab.  
CONTINUED  
157  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:32 32SAA650_161  
Climate Control System  
The climate control system draws air  
through the exterior vents at the  
bottom of the windscreen. Keep  
these vents clear of leaves and other  
debris.  
For the climate control system to  
provide heating and cooling, the  
engine must be running.  
PASSENGER’S SIDE VENT  
Open  
Close  
158  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:36 32SAA650_162  
Climate Control System  
159  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:41 32SAA650_163  
Climate Control System  
Fully-automatic Operation  
To put the Automatic Climate  
Control in fully-automatic mode,  
press the AUTO button, then set the  
desired temperature by pressing the  
temperature control switch. You will  
see ‘‘FULL AUTO’’ in the system’s  
display.  
DISPLAY  
AUTO BUTTON  
AIR CONDITIONING (A/C) BUTTON  
OFF BUTTON  
The system automatically selects the  
proper mix of conditioned and/or  
heated air that will, as quickly as  
possible, raise or lower the interior  
temperature from its current level to  
the set temperature.  
TEMPERATURE  
CONTROL SWITCH  
FAN CONTROL SWITCH  
RECIRCULATION BUTTON  
160  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:50 32SAA650_164  
Climate Control System  
When you set the temperature to its  
Semi-automatic Operation  
Recirculation Button  
lower limit ‘‘  
limit ‘‘  
’’ or its upper  
You can manually select various  
functions of the Climate Control  
system when it is in fully-automatic  
This button controls the source of  
the air going into the system. When  
the indicator in this button is lit, the  
’’, the system runs at  
full cooling or heating only. It does  
not regulate the interior temperature. mode. All other features remain auto- system is recirculating the interior  
matically controlled. Making any  
manual selection causes the light  
above the AUTO button to go out.  
(Recirculation mode). When the  
indicator is off, air is brought in from  
outside of the vehicle (Fresh Air  
mode).  
You can, for example, manually put  
the system in recirculation mode  
when driving through an area of  
smoke or fumes.  
In cold weather, the fan will not  
come on automatically until the  
vehicle has been driven for a short  
time and the heater starts to develop  
warm air.  
Air Conditioning (A/C) Button  
Press the A/C button to turn the air  
conditioning on and off. When the  
A/C is on, the indicator in the button  
lights.  
Pressing the OFF button shuts the  
climate control system completely  
off. No air flow can cause the  
windows to fog up. It is  
When you turn the A/C off, the  
recommended that you keep the fan  
on at all times so stale air and  
moisture do not build up in the  
interior and cause fogging.  
system cannot regulate the inside  
temperature if you set the dial below  
the outside temperature. With the  
A/C off, use the temperature control  
switch to adjust the temperature of  
the air flow to a comfortable setting.  
CONTINUED  
161  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:31:56 32SAA650_165  
Climate Control System  
Fan Control Switch  
You can manually select the fan  
speed by pressing the fan control  
switch: ▲ to increase the fan’s speed,  
or ▼ to decrease the fan’s speed.  
MODE BUTTON  
Mode Button  
Use the MODE button to select the  
vents the air flows from. Some air  
will flow from the dashboard corner  
vents in all modes; you can turn it off  
with the dial below each vent. Each  
time you press the MODE button,  
the display shows the mode selected.  
Press the button four times to see all  
the modes.  
DISPLAY  
FAN CONTROL SWITCH  
162  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:02 32SAA650_166  
Climate Control System  
The main air flow is divided  
between the floor vents and  
defroster vents at the base of the  
windscreen.  
The main air flow is directed  
to the floor vents.  
CONTINUED  
163  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:08 32SAA650_167  
Climate Control System  
Air flow is divided between  
the vents in the dashboard and the  
floor vents.  
The air flow comes out of  
the dashboard vents.  
164  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:15 32SAA650_168  
Climate Control System  
The  
button directs the main  
air flow to the windscreen for faster  
defrosting. It also overrides any  
MODE selection you may have made.  
When you select  
, the A/C  
turns on automatically and the  
system selects Fresh Air mode. For  
faster defrosting, manually set the  
fan speed to high. You can also  
increase air flow to the windscreen  
by closing the side vents in the  
dashboard.  
BUTTON  
When you turn off  
by  
pressing the button again, the  
system returns to its former settings.  
Rear Window Demister Button  
This button turns the rear window  
demister on and off (see page 106 ).  
REAR WINDOW DEMISTER  
BUTTON  
DISPLAY  
165  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:20 32SAA650_169  
Climate Control System  
Sunlight Sensor/Temperature  
Sensor  
SUNLIGHT SENSOR  
TEMPERATURE SENSOR  
To regulate the interior temperature,  
the system has two sensors. A sun-  
light sensor is located in the top of  
the dashboard and a temperature  
sensor is next to the steering column.  
Do not cover the sensors or spill any  
liquid on them.  
166  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:28 32SAA650_170  
Audio System  
The audio system is in principle  
available as an option.  
(A Type)  
Some models may have one of the  
audio systems described in this  
section. Read the appropriate pages  
in this section for operation of the  
audio systems installed in your  
vehicle.  
page 169 to 179 for A type  
page 180 to 196 for B type  
page 197 to 213 for C type  
page 214 to 222 for D type  
(B Type)  
If your vehicle has a different audio  
system from these types, read the  
radio manufacturer’s manual that  
came with your vehicle for its  
operation.  
These illustrations are left handle  
models.  
CONTINUED  
167  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:32 32SAA650_171  
Audio System  
(C Type)  
(D Type)  
168  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:41 32SAA650_172  
Audio System (A Type)  
Your audio system provides clear  
reception on each band while the  
preset buttons allow you to easily  
select your favourite stations.  
FM/AM BUTTON  
SOUND  
INDICATOR  
SCAN INDICATOR  
SCAN BUTTON  
Operating the Radio  
A.SEL BUTTON  
ST INDICATOR  
A.SEL INDICATOR  
The ignition switch must be in the  
ACCESSORY (I) or the ON (II)  
position to operate the audio system.  
Turn the system on by pushing the  
VOL/PWR knob, the FM/AM  
button, the CD button or the AUX  
button. Adjust the volume by turning  
the knob.  
CD BUTTON  
PRESET  
AUX BUTTON  
INDICATORS  
PRESET  
VOL/PWR  
KNOB  
BUTTONS  
DISP BUTTON  
SEEK BAR TUNE BAR  
The band and frequency that the  
radio was last tuned to is displayed.  
To change bands, press the FM/AM  
button. On the UKW (FM) band, ST  
will be displayed if the station is  
broadcasting in stereo. ST will flash  
if you are driving in an area where  
the radio signal is weak. Stereo  
You can use any of five methods to  
find radio stations on the selected  
band: TUNE, SEEK, SCAN, AUTO  
SELECT, and the preset buttons.  
reproduction on AM is not available.  
CONTINUED  
169  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:50 32SAA650_173  
Audio System (A Type)  
TUNE － Use the TUNE bar to tune  
the radio to a desired frequency.  
Push the TUNE bar ▲ to tune to a  
higher frequency, or ▼ to tune to a  
lower frequency. Push the bar ▲ or  
▼ until the display reaches the  
desired frequency.  
SCAN － The SCAN function  
samples all the stations with strong  
signals on the selected band. To  
activate it, press the SCAN button,  
then release it. The system will scan  
up the band for a station with a  
strong signal. When it finds one, it  
will stop and play that station for  
approximately 10 seconds. If you do  
nothing, the system will then scan  
for the next strong station and play  
that for 10 seconds. When it plays a  
station that you want to continue  
listening to, press the SCAN button  
again.  
To store a frequency:  
1. Select the desired band.  
2. Use the TUNE, SEEK, or SCAN  
function to tune the radio to a  
desired station.  
SEEK － The SEEK function  
3. Pick the preset button you want  
for that station. Press the button  
and hold it until you hear a beep.  
searches the band for a station with  
a strong signal. To activate it, push  
the SEEK bar ▲ or ▼, then release  
it. Depending on which part of the  
SEEK bar you press, the system  
scans upward or downward from the  
current frequency. It stops when it  
finds a station with a strong signal.  
4. Repeat steps 1 to 3 to store a total  
of six stations on AM and twelve  
on FM.  
Preset － You can store the  
Once a station’s frequency is stored,  
simply press and release the proper  
preset button to tune to it.  
frequencies of your favourite radio  
stations in the six preset buttons.  
Each button will store one frequency  
on the AM band, and two  
The preset frequencies will be lost if  
your vehicle’s battery goes dead, is  
disconnected, or the audio fuse is  
removed.  
frequencies on the FM band.  
170  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:32:57 32SAA650_174  
Audio System (A Type)  
AUTO SELECT － If you are  
travelling far from home and can no  
longer receive the stations you  
preset, you can use the Auto Select  
feature to find stations in the local  
area.  
FM/AM BUTTON  
A.SEL BUTTON  
A.SEL  
INDICATOR  
To activate AUTO SELECT, press  
the A. SEL button. ‘‘A. SEL’’ will  
flash in the display, and the system  
will go into scan mode for several  
seconds. It automatically scans both  
bands, looking for stations with  
strong signals. It stores the  
frequencies of six AM stations and  
twelve FM stations in the preset  
buttons. You can then use the preset  
buttons to select those stations.  
AUX BUTTON  
PRESET BUTTONS  
With Auto Select on, you can  
manually store any frequencies in  
the preset buttons.  
Auto Select does not erase the  
frequencies that you preset  
previously. When you return home,  
turn off Auto Select by pressing the  
A. SEL button. The preset buttons  
will then select the frequencies you  
originally set.  
If you are in a remote area, Auto  
Select may not find six strong AM  
stations or twelve strong FM stations.  
If this happens, you will see a ‘‘0’’  
displayed when you press any preset  
button that does not have a station  
stored.  
171  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:05 32SAA650_175  
Audio System (A Type)  
Adjusting the Sound  
SOUND  
INDICATOR  
DISP BUTTON  
H BUTTON  
Bass, Treble, Fader, and Balance are  
each adjustable. You select which of  
these you want to adjust by pressing  
the SOUND button. The mode  
changes from BAS to TRE to FAD to  
BAL, and then back to the selected  
audio mode, each time you press the  
SOUND button. Each mode is shown  
in the display as it changes.  
VOL/PWR  
KNOB  
R BUTTON  
Balance/Fader － These two  
modes adjust the strength of the  
sound coming from each speaker.  
BAL adjusts the side-to-side strength,  
while FAD adjusts the front-to-back  
strength.  
SOUND BUTTON  
M BUTTON  
Treble/Bass － Use these modes to  
As you adjust a mode, you will hear a  
beep whenever the adjustment level  
Select BAL or FAD by pressing the  
SOUND button. Adjust the Balance  
or Fader to your liking by turning  
the VOL/PWR knob. The  
adjustment level is shown on the  
display.  
adjust the tone to your liking. Select  
TRE or BAS by pressing the SOUND reaches the centre, maximum, or  
button. Adjust the desired mode by  
turning the VOL/PWR knob. The  
adjustment level is shown on the  
display.  
minimum of its range. The system  
will automatically return the display  
to normal mode about 5 seconds  
after you stop adjusting a mode with  
the VOL/PWR knob.  
172  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:14 32SAA650_176  
Audio System (A Type)  
Digital Clock  
You can use the R (Preset 6) button  
to quickly set the time to the nearest  
hour. Press the R (Preset 6) button.  
If the displayed time is before the  
half hour, pressing R (Preset 6) sets  
the clock back to the previous hour.  
If the displayed time is after the half  
hour, pressing R (Preset 6) sets the  
clock forward to the beginning of the  
next hour.  
DISPLAY － When operating the  
audio system, you can choose to  
display the sound indicator or the  
volume indicator by pressing the  
DISP button.  
The display of your audio system  
usually shows the time when the  
ignition switch is in the  
ACCESSORY (I) or the ON (II)  
position.  
With a disc playing, you can choose  
to display the track number or the  
play time by pressing the DISP  
button for more than 2 seconds.  
To set the time, press the SOUND  
button for more than 2 seconds. You  
will hear a beep, and the time display  
will begin blinking.  
For example:  
1:06 would RESET to 1:00  
1:52 would RESET to 2:00  
To set the hours, press and hold the  
H (Preset 4) button until the hour  
advances to the desired time.  
If your vehicle’s battery is  
disconnected or goes dead, the time  
setting will be lost. To set the time  
To set the minutes, press and hold  
the M (Preset 5) button until the  
numbers advance to the desired time. again, follow the setting procedure.  
173  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:23 32SAA650_177  
Audio System (A Type)  
Operating the CD Player  
You operate the CD player with the  
same controls used for the radio.  
FM/AM BUTTON  
SCAN/RPT BUTTON  
With the ignition switch in the  
ACCESSORY (I) or the ON (II)  
position, insert the disc into the CD  
slot. Push the disc in halfway, the  
drive will pull it in the rest of the way  
and begin to play. The number of the  
track that is playing is shown in the  
display.  
RDM BUTTON  
EJECT  
BUTTON  
RDM INDICATOR  
RPT INDICATOR  
CD  
BUTTON  
AUX  
BUTTON  
You can also play 8-cm (3-in) discs  
without using an adapter ring. You  
should not try to use an adapter ring.  
This may cause the audio system to  
damage or malfunction.  
SEEK/SKIP BAR  
TUNE BAR  
VOL/PWR KNOB SCAN INDICATOR  
In all cases, play only standard round  
discs. Odd-shaped CDs may jam in  
the drive or cause other problems.  
When the system reaches the end of  
the disc, it will return to the begin-  
ning and play the disc again.  
For best results when using CD-R/  
CD-RW discs, use only high quality  
discs labelled for audio use. When  
recording a CD-R/CD-RW, the  
recording must be closed in order  
for the disc to be used by CD players. The label can curl up and cause the  
disc to jam in the unit.  
Do not use discs with adhesive labels.  
174  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:30 32SAA650_178  
Audio System (A Type)  
You can switch to the radio while a  
CD is playing by pressing the FM/  
AM button. Press the CD button to  
return to playing the CD. The CD  
will begin playing where it left off.  
You can use the TUNE bar or the  
SEEK/SKIP bar while a disc is  
playing to select passages or to  
change tracks.  
Each time you push and release the  
SEEK/SKIP bar ▲, the system skips  
forward to the beginning of the next  
track. Push and release ▼ to skip  
backward to the beginning of the  
current track. Push it again to skip to  
the beginning of the previous track.  
To move rapidly within a track, push  
and hold the TUNE bar or the  
SEEK/SKIP bar. Push and hold ▲ to  
move forward. Press and hold ▼ to  
move backward. Release the bar  
when the system reaches the point  
you want.  
If you turn the system off while a CD  
is playing, either with the VOL/PWR  
knob or by turning off the ignition  
switch, the disc will stay in the drive.  
When you turn the system back on,  
the CD will begin playing where it  
left off.  
With a disc playing, you can use the  
REPEAT, RANDOM and SCAN  
functions.  
Press the EJECT button to remove  
the disc from the drive.  
If you eject the disc, but do not  
remove it from the slot, the system  
will automatically reload the disc  
after 10 seconds and put the CD  
player in pause mode. To begin  
playing the disc, press the CD button.  
CONTINUED  
175  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:36 32SAA650_179  
Audio System (A Type)  
REPEAT － To activate the Repeat  
SCAN － This feature, when  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225.  
feature, press the SCAN/RPT button activated, samples all the tracks on  
for more than 2 seconds. You will  
see RPT in the display. The system  
continuously replays the current  
track. Press the SCAN/RPT button  
for more than 2 seconds again to  
turn it off.  
the CD in the order they are  
recorded on the CD. To activate the  
Scan feature, select the Scan mode  
by pressing the SCAN/RPT button.  
You will see SCAN in the display.  
The system will then play the first  
track approximately 10 seconds. If  
you do nothing, the system will then  
play the following tracks for 10  
seconds each. When it plays a track  
that you want to continue listening to,  
press the SCAN/RPT button again.  
After all tracks on that disc are  
sampled, the SCAN mode is  
RANDOM PLAY － This feature,  
when activated, plays the tracks on  
the CD in random order, rather than  
in the order they are recorded on the  
CD. To activate Random Play, press  
and release the RDM button. You  
will see RDM in the display. The  
system will then select and play  
tracks randomly. This continues  
until you deactivate Random Play by  
pressing RDM again.  
cancelled. Pressing the SCAN/RPT  
button again will also deactivate this  
feature.  
176  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:42 32SAA650_180  
Audio System (A Type)  
CD Player Error Indications  
If you see an error indication in the  
display while operating the CD  
player, find the cause in the chart to  
the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the EJECT button and pull out the disc.  
Check if the disc is inserted correctly in the CD  
player.  
Make sure the disc is not scratched or damaged.  
Press the EJECT button and pull out the disc.  
Check the disc for damage or deformation.  
If the CD cannot be pulled out or the error  
indication does not disappear after the disc is  
ejected, see your dealer.  
Do not try to force the disc out of the player.  
Consult your dealer.  
Will disappear when the temperature returns to  
normal.  
FOCUS Error  
Mechanical Error  
High temperature  
177  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:51 32SAA650_181  
Audio System (A Type)  
Operating the CD Changer  
(Optional)  
To select a different disc, press the  
DISC ＋ (Preset 6) or DISC －  
(Preset 5) button. The next disc in  
the changer is loaded and played  
when you press the DISC ＋ button.  
DISC － loads and plays the previous  
disc. If you select an empty slot in  
the magazine, the changer will, after  
finding that slot empty, try to load  
the CD in the next slot. This  
If you eject the in-dash CD while it is  
playing, the system will automatically  
switch to the CD changer and begin  
play where it left off. If there are no  
CDs in the changer, the display will  
flash. You will have to select another  
mode (AM or FM) with the FM/AM  
button.  
A Compact Disc changer is available  
for your vehicle. It holds up to 6  
discs, providing several hours of  
continuous entertainment. You  
operate this CD changer with the  
same controls used for the in-dash  
CD player.  
When you switch back to CD mode,  
the system selects the same unit (in-  
dash or changer) that was playing  
when you switched out of CD mode.  
Load the desired CDs in the  
magazine and load the magazine in  
the changer according to the  
continues until it finds a CD to load  
and play.  
instructions that came with the unit.  
Play only standard round discs. Odd-  
shaped CDs may jam in the drive or  
cause other problems.  
If you load a CD in the in-dash player  
while the changer is playing a CD,  
the system will stop the changer and  
begin playing the in-dash CD. To  
select the changer again, press the  
AUX button. Play will begin where it  
left off. Use the AUX button to  
To use the SKIP, REPEAT, and  
RANDOM functions, refer to the in-  
dash player operating instructions.  
Press the AUX button. You will see  
‘‘CD’’ in the display. The system will  
start to play the first track of the first switch between the player and the  
disc. When that disc ends, the next  
disc in the magazine is loaded and  
played. After the last disc finishes,  
the system returns to disc 1.  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225 .  
changer.  
178  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:33:59 32SAA650_182  
Audio System (A Type)  
CD Changer Error Indications  
If you see an error indication in the  
display while operating the CD  
changer, find the cause in the chart  
to the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
FOCUS Error  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
Mechanical Error  
No CD in the CD  
magazine  
Insert CD.  
High temperature  
Will disappear when the temperature returns to  
normal.  
No CD magazine in the  
CD changer  
Insert CD magazine.  
179  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:07 32SAA650_183  
Audio System (B Type)  
Your audio system provides clear  
reception on each band while the  
preset buttons allow you to easily  
select your favourite stations.  
A.SEL INDICATOR  
ST INDICATOR  
A.SEL  
BUTTON  
SCAN  
SCAN  
INDICATOR  
SEEK BAR  
Operating the Radio  
BUTTON  
The ignition switch must be in the  
ACCESSORY (I) or the ON (II)  
position to operate the audio system.  
Turn the system on by pushing the  
/VOL knob, the FM/AM  
TUNE KNOB  
/VOL  
KNOB  
button or CD/AUX button. Adjust  
the volume by turning the knob.  
PRESET BUTTONS  
The band and frequency that the  
radio was last tuned to is displayed.  
To change bands, press the FM/AM  
button. On the UKW (FM) band, ST  
will be displayed if the station is  
broadcasting in stereo. ST will flash  
if you are driving in an area where  
the radio signal is weak. Stereo  
You can use any of five methods to  
find radio stations on the selected  
band: TUNE, SEEK, SCAN, AUTO  
SELECT, and the preset buttons.  
reproduction on AM is not available.  
180  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:16 32SAA650_184  
Audio System (B Type)  
TUNE － Use the TUNE knob to  
SCAN － The SCAN function  
2. Use the TUNE, SEEK, or SCAN  
function to tune the radio to a  
desired station.  
tune the radio to a desired frequency. samples all the stations with strong  
Turn the TUNE knob to the right to  
tune to a higher frequency, or to the  
left to tune to a lower frequency.  
Turn the knob right or left until the  
display reaches the desired  
frequency.  
signals on the selected band. To  
activate it, press the SCAN button,  
then release it. The system will scan  
up the band for a station with a  
strong signal. When it finds one, it  
will stop and play that station for  
approximately 5 seconds. If you do  
nothing, the system will then scan  
for the next strong station and play  
that for 5 seconds. When it plays a  
station that you want to continue  
listening to, press the SCAN button  
again.  
3. Pick the preset button you want  
for that station. Press the button  
and hold it until you hear a beep.  
4. Repeat steps 1 through 3 to store a  
total of six stations on AM and  
twelve stations on FM.  
SEEK － The SEEK function  
searches the band for a station with  
a strong signal. To activate it, press  
the SEEK bar  
or  
, then  
Once a station’s frequency is stored,  
simply press and release the proper  
preset button to tune to it.  
release it. Depending on which part  
of the SEEK bar you press, the  
system scans upward or downward  
from the current frequency. It stops  
when it finds a station with a strong  
signal.  
Preset － You can store the  
The preset frequencies will be lost if  
your vehicle’s battery goes dead, is  
disconnected, or the audio fuse is  
removed.  
frequencies of your favourite radio  
stations in the six preset buttons.  
Each button will store one frequency  
on the AM band, and two  
frequencies on the FM band.  
To store a frequency:  
1. Select the desired band.  
CONTINUED  
181  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:22 32SAA650_185  
Audio System (B Type)  
AUTO SELECT － If you are  
travelling far from home and can no  
longer receive the stations you  
preset, you can use the Auto Select  
feature to find stations in the local  
area.  
A.SEL BUTTON  
A.SEL INDICATOR  
FM/AM BUTTON  
To activate Auto Select, press the  
A. SEL button. A. SEL will flash in  
the display, and the system will go  
into scan mode for several seconds.  
It automatically scans FM band,  
looking for stations with strong  
signals. It stores the frequencies of  
PRESET BUTTONS  
six FM stations in the preset buttons. With Auto Select on, you can  
Auto Select does not erase the  
frequencies that you preset  
You can then use the preset buttons  
to select those stations.  
manually store any frequencies in  
the preset buttons.  
previously. When you return home,  
turn off Auto Select by pressing the  
A. SEL button. The preset buttons  
will then select the frequencies you  
originally set.  
If you are in a remote area, Auto  
Select may not find six strong FM  
stations. If this happens, you will see  
a ‘‘0’’ displayed when you press any  
preset button that does not have a  
station stored.  
182  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:29 32SAA650_186  
Audio System (B Type)  
Radio Data System (RDS)  
With your audio system, you can  
utilize many convenient features  
provided by the Radio Data System  
(RDS).  
TP INDICATOR  
TA INDICATOR  
PTY/NEWS BUTTON  
With the FM band selected, you can  
keep listening to the same station  
even if its frequency changes as you  
enter different regions while you are  
travelling.  
TA BUTTON  
FM/AM  
BUTTON  
The RDS function turns on auto-  
matically when you turn the system  
on. If the station you are listening to  
is an RDS station, the frequency  
display will disappear and the station  
name will be displayed. Then, the  
system will automatically keep  
selecting the frequency with the  
strongest signal from the frequen-  
cies that carry the same programs.  
This can save you the trouble of  
re-tuning to obtain the same station  
as long as you are in the same RDS  
network area.  
/VOL  
KNOB  
PRESET BUTTONS  
CONTINUED  
183  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:38 32SAA650_187  
Audio System (B Type)  
You can turn the RDS function on or  
off. To switch the function on or off,  
Program Service Name Display  
If the station you are listening to is  
an RDS station, the frequency  
display will disappear and the station  
name or PTY information will be  
displayed. Press and release the  
PTY/NEWS button to switch the  
display information between the  
name of network/station and the  
PTY information (see page 186 for  
the PTY display information).  
TA (Traffic Announcement Standby)  
Function  
When the TA button is pressed and  
released, ‘‘TA’’ will light on the  
display and the system will stand by  
for traffic announcements.  
press the  
/VOL knob for more  
than 2 seconds with the audio  
system on, then press the Preset 2  
repeatedly. To set the RDS on or off,  
press the  
/VOL knob again.  
When a traffic information (TP)  
station is selected, ‘‘TP’’ will light on  
the display indicating that traffic  
reports can be received from this  
station. When the EON (Enhanced  
Other Network) TP station is  
selected, ‘‘TP’’ will also light on the  
display.  
When the signals of the RDS station  
become so weak that the system can  
no longer follow the station, the  
system will hold the last tuned  
frequency and the display will  
change from the station name to the  
frequency.  
In some countries, you cannot utilize  
features provided by RDS as the  
RDS function is not provided in all  
stations.  
EON information cross-references  
other program services that  
broadcast traffic information, and  
when EON information is received,  
traffic reports can be received  
through another program service.  
184  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:44 32SAA650_188  
Audio System (B Type)  
You can receive traffic information  
while you are listening to a CD. If the  
system is tuned to a TP or EON TP  
station before playing a CD, the  
system will stand by for traffic  
announcements by pressing the TA  
button (‘‘TA’’ indicator ON) and the  
system will switch from CD to the  
traffic announcement when it begins.  
The system will return to the CD  
mode when the traffic information is  
finished.  
TA INDICATOR  
NEWS INDICATOR  
PTY/NEWS BUTTON  
TP INDICATOR  
TA BUTTON  
FM/AM  
BUTTON  
To turn off the TA function, press  
the TA button again. ‘‘TA’’ will go out  
from the display.  
If you use SEEK or Auto Select with  
the TA function ON, the system  
searches only TP or EON TP  
stations.  
SEEK BAR  
CONTINUED  
185  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:49 32SAA650_189  
Audio System (B Type)  
PTY Display Function  
AFFAIRS : Topical programs  
expanding upon the news.  
CLASSICS : Serious classics;  
performances of major orchestral  
works.  
SCIENCE : Programs about nature,  
science, and technology.  
SPORT : Programs concerned with  
any aspect of sports.  
VARIED : Light entertainment  
programs.  
When the PTY/NEWS button is  
pressed for more than 2 seconds, the  
PTY display function comes on. This  
function lets you know the type of  
programs the selected RDS station is  
broadcasting. For example, if the  
station is broadcasting dramas,  
‘‘DRAMA’’ is shown in the display. If  
it is a station of scientific programs,  
‘‘SCIENCE’’ will be shown. The  
principal PTYs are shown in the  
following.  
CULTURE : Programs concerned  
with any aspect of national or  
regional culture.  
DRAMA : All radio plays and serials.  
EASY MUS : M.O.R MUSIC.  
EDUCATE : Educational programs.  
INFO : General information and  
advice.  
L.CLASS : Light classics; classical  
music for non-specialist appreciation.  
NEWS : Short accounts of facts,  
events, publicly expressed views,  
reportage, etc.  
OTH MUS : Other types of music,  
such as Jazz, R & B, Folk, Country,  
Reggae.  
POP MUS : Commercial music of  
popular appeal.  
ROCK MUS : Contemporary modern  
music.  
186  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:34:56 32SAA650_190  
Audio System (B Type)  
After you select the desired program  
type, the system will search for a  
station with the same PTY code as  
the selected program type. When  
you use this function for the first  
time, ‘‘NEWS’’ will appear as it was  
preset at the factory.  
While a PTY is displayed, you can  
use the SEEK bar to find a station of  
the desired PTY. When you press  
either side of the SEEK bar, the  
After your desired PTY is displayed,  
press either side of the SEEK bar  
again within 5 seconds. The system  
will go into the PTY search mode  
display will show different PTYs (see and it will search for a station of the  
the PTYs list on the previous page).  
selected PTY. If there is no station  
available in the selected PTY, ‘‘NO  
PTY’’ is displayed for about 5  
seconds and the PTY search mode is  
cancelled.  
The PTY setting mode is cancelled if  
no further steps are taken within 5  
seconds after selecting the desired  
PTY by operating the SEEK bar.  
If the selected RDS station does not  
transmit PTY data, ‘‘NO PTY’’ is  
displayed. When the selected station  
is not an RDS station, ‘‘NO RDS’’ is  
displayed for about 5 seconds. The  
PTY display function turns off and  
the display returns to normal if no  
further steps are taken.  
Some stations may broadcast the  
programs with contents different  
from their PTY code.  
In the PTY search mode, the tuning  
step is set to 50 kHz while searching  
the FM band. This step changes to  
100 kHz when the AF or TA function  
is activated.  
CONTINUED  
187  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:02 32SAA650_191  
Audio System (B Type)  
PTY/News Interrupt Function  
To activate this function, press the  
PTY/NEWS button for more than 2  
seconds and select ‘‘NEWS.’’ The  
system will hold the last tuned FM  
station/network PTY while you are  
listening to the CD. With this  
function on, playing the CD is  
interrupted and the system switches  
from CD mode to the FM newscast  
when the newscast is broadcasting  
from the FM station.  
Your audio system has other  
PTY Alarm  
interrupt functions (including TA  
function). The interrupt function  
first activated has priority over the  
PTY code ‘‘ALARM’’ is used for  
emergency announcements, such as  
natural disasters. When this code is  
others and the indication of the other received, ‘‘ALARM’’ comes on the  
interrupt function goes out. To  
activate the other interrupt function,  
turn off the currently activated  
interrupt function.  
display and the volume is changed.  
When the alarm is cancelled, the  
system will return to the normal  
operation mode.  
When the program is changed to  
another program or the frequency  
cannot be received for 10 seconds  
due to weak signal, the system will  
return to the CD mode automatically.  
188  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:10 32SAA650_192  
Audio System (B Type)  
Adjusting the Sound  
R BUTTON  
H BUTTON  
Bass, Treble, Balance, and Fader are  
each adjustable. You select which of  
these you want to adjust by pressing  
the MODE knob. The mode changes  
from BAS to TRE to FAD to BAL,  
and then back to BAS each time you  
press the button. Each mode is  
shown in the display as it changes.  
TA BUTTON  
Balance/Fader － These two  
modes adjust the strength of the  
sound coming from each speaker.  
BAL adjusts the side-to-side strength,  
while FAD adjusts the front-to-back  
strength.  
M BUTTON  
MODE KNOB  
Select BAL or FAD by pressing the  
MODE knob. Adjust the Balance or  
Fader to your liking by turning the  
knob. The adjustment level is shown  
on the display.  
Treble/Bass － Use these modes to  
adjust the tone to your liking. Select  
TRE or BAS by pressing the MODE  
knob. Adjust the desired mode by  
turning the knob. The adjustment  
level is shown on the display.  
As you adjust a mode, you will hear a  
beep whenever the adjustment level  
reaches the centre, maximum, or  
minimum of its range. The system  
will automatically return the display  
to normal mode about 5 seconds  
after you stop adjusting a mode with  
the MODE knob.  
189  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:17 32SAA650_193  
Audio System (B Type)  
Digital Clock  
To set the hours, press the H  
(Preset 1) button. Press and hold the  
H button until the hour advances to  
the desired time.  
For example:  
The display of your audio system  
usually shows the time when the  
ignition switch is in the  
ACCESSORY (I) or the ON (II)  
position.  
1:06 would RESET to 1:00  
1:52 would RESET to 2:00  
If your vehicle’s battery is  
To set the minutes, press the M  
(Preset 2) button. Press and hold the  
M button until the minutes numbers  
advance to the desired time.  
disconnected or goes dead, the time  
setting will be lost. To set the time  
again, follow the setting procedure.  
To set the time, press the TA button  
for more than 2 seconds until you  
hear a beep. The time display will  
begin blinking.  
You can use the R (Preset 3) button  
to quickly set the time to the nearest  
hour. Press the R (Preset 3) button.  
If the displayed time is before the  
half hour, pressing R (Preset 3) sets  
the clock back to the previous hour.  
If the displayed time is after the half  
hour, pressing R (Preset 3) sets the  
clock forward to the beginning of the  
next hour.  
190  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:27 32SAA650_194  
Audio System (B Type)  
Operating the CD Player  
You operate the CD player with the  
same controls used for the radio.  
RDM BUTTON  
RPT INDICATOR  
With the ignition switch in the  
ACCESSORY (I) or the ON (II)  
position, insert the disc into the CD  
slot. Push the disc in halfway, the  
drive will pull it in the rest of the way  
and begin to play. The number of the  
track that is playing is shown in the  
display.  
RPT  
RDM  
BUTTON  
INDICATOR  
EJECT  
BUTTON  
FM/AM  
BUTTON  
You can also play 8-cm (3-in) discs  
without using an adapter ring. You  
should not try to use an adapter ring.  
This may cause the audio system to  
damage or malfunction.  
SEEK/SKIP BAR  
CD/AUX BUTTON  
/VOL KNOB  
In all cases, play only standard round  
discs. Odd-shaped CDs may jam in  
the drive or cause other problems.  
When the system reaches the end of  
the disc, it will return to the begin-  
ning and play the disc again.  
For best results when using CD-R/  
CD-RW discs, use only high quality  
discs labelled for audio use. When  
recording a CD-R/CD-RW, the  
recording must be closed in order  
for the disc to be used by CD players. The label can curl up and cause the  
disc to jam in the unit.  
Do not use discs with adhesive labels.  
CONTINUED  
191  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:35 32SAA650_195  
Audio System (B Type)  
You can switch to the radio while a  
CD is playing by pressing the FM/  
AM button. Press the CD/AUX  
button to return to playing the CD.  
The CD will begin playing where it  
left off.  
You can use the SEEK/SKIP bar  
while a disc is playing to select  
passages and change tracks.  
Each time you press and release the  
side of the SEEK/SKIP bar,  
the system skips forward to the  
beginning of the next track. Press  
To move rapidly within a track, press  
and hold the SEEK/SKIP bar. Press  
and release the  
side to skip  
backward to the beginning of the  
current track. Press it again to skip  
to the beginning of the previous  
track.  
and hold the  
side to move  
If you turn the system off while a CD  
forward. You will see CUE in the  
display. Press and hold the side  
is playing, either with the  
/VOL  
knob or by turning off the ignition  
switch, the disc will stay in the drive.  
When you turn the system back on,  
the CD will begin playing where it  
left off.  
to move backward. You will see  
REW displayed. Release the bar  
when the system reaches the point  
you want.  
With a disc playing, you can use the  
REPEAT and RANDOM functions.  
Press the EJECT button to remove  
the disc from the drive.  
If you eject the disc, but do not  
remove it from the slot, the system  
will automatically reload the disc  
after 15 seconds and put the CD  
player in pause mode. To begin  
playing the disc, press the CD/AUX  
button.  
192  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:40 32SAA650_196  
Audio System (B Type)  
REPEAT － To activate the Repeat  
feature, press and release the RPT  
button. You will see RPT in the  
display as a reminder. The system  
continuously replays the current  
track. Press the RPT button again to  
turn it off.  
RANDOM PLAY － This feature,  
when activated, plays the tracks on  
the CD in random order, rather than  
in the order they are recorded on the  
CD. To activate Random Play, press  
and release the RDM button. You  
will see RDM in the display. The  
system will then select and play  
tracks randomly. This continues  
until you deactivate Random Play by  
pressing RDM again.  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225.  
193  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:47 32SAA650_197  
Audio System (B Type)  
CD Player Error Indications  
If you see an error indication in the  
display while operating the CD  
player, find the cause in the chart to  
the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the EJECT button and pull out the disc.  
Check if the disc is inserted correctly in the CD  
player.  
Make sure the disc is not scratched or damaged.  
Press the EJECT button and pull out the disc.  
Check the disc for damage or deformation.  
If the CD cannot be pulled out or the error  
indication does not disappear after the disc is  
ejected, see your dealer.  
Do not try to force the disc out of the player.  
Consult your dealer.  
Will disappear when the temperature returns to  
normal.  
FOCUS Error  
Mechanical Error  
High temperature  
194  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:35:56 32SAA650_198  
Audio System (B Type)  
Operating the CD Changer  
(Optional)  
To select a different disc, press the  
DISC ＋ (Preset 6) or DISC －  
(Preset 5) button. The next disc in  
the changer is loaded and played  
when you press the DISC ＋ button.  
DISC － loads and plays the previous  
disc. If you select an empty slot in  
the magazine, the changer will, after  
finding that slot empty, try to load  
the CD in the next slot. This  
If you eject the in-dash CD while it is  
playing, the system will automatically  
switch to the CD changer and begin  
play where it left off. If there are no  
CDs in the changer, the display will  
flash. You will have to select another  
mode (AM or FM) with the FM/AM  
button.  
A Compact Disc changer is available  
for your vehicle. It holds up to 6  
discs, providing several hours of  
continuous entertainment. You  
operate this CD changer with the  
same controls used for the in-dash  
CD player.  
When you switch back to CD mode,  
the system selects the same unit (in-  
dash or changer) that was playing  
when you switched out of CD mode.  
Load the desired CDs in the  
magazine and load the magazine in  
the changer according to the  
continues until it finds a CD to load  
and play.  
instructions that came with the unit.  
Play only standard round discs. Odd-  
shaped CDs may jam in the drive or  
cause other problems.  
If you load a CD in the in-dash player  
while the changer is playing a CD,  
the system will stop the changer and  
begin playing the in-dash CD. To  
select the changer again, press the  
CD/AUX button. Play will begin  
where it left off. Use the CD/AUX  
button to switch between the player  
and the changer.  
To use the SKIP, REPEAT, and  
RANDOM functions, refer to the in-  
dash player operating instructions.  
Press the CD/AUX button. You will  
see ‘‘CD’’ in the display. The system  
will start to play the first track of the  
first disc. When that disc ends, the  
next disc in the magazine is loaded  
and played. After the last disc  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225 .  
finishes, the system returns to disc 1.  
195  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:04 32SAA650_199  
Audio System (B Type)  
CD Changer Error Indications  
If you see an error indication in the  
display while operating the CD  
changer, find the cause in the chart  
to the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
FOCUS Error  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
Mechanical Error  
High temperature  
Will disappear when the temperature returns to  
normal.  
No CD magazine in the  
CD changer  
Insert CD magazine.  
196  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:13 32SAA650_200  
Audio System (C Type)  
Your vehicle’s audio system provides  
clear reception on each band while  
the preset buttons allow you to easily  
select your favourite stations.  
SCAN INDICATOR  
FM/AM BUTTON SCAN BUTTON  
Operating the Radio  
A.SEL BUTTON  
A.SEL INDICATOR  
The ignition switch must be in the  
ACCESSORY (I) or the ON (II)  
position to operate the audio system.  
Turn the system on by pushing the  
/VOL knob, the FM/AM  
CD/AUX  
BUTTON  
ST INDICATOR  
PRESET  
INDICATORS  
PRESET  
button or CD/AUX button. Adjust  
the volume by turning the knob.  
BUTTONS  
/VOL KNOB  
SEEK BAR TUNE BAR  
The band and frequency that the  
radio was last tuned to is displayed.  
To change bands, press the FM/AM  
button. On the UKW (FM) band, ST  
will be displayed if the station is  
broadcasting in stereo. ST will flash  
if you are driving in an area where  
the radio signal is weak. Stereo  
You can use any of five methods to  
find radio stations on the selected  
band: TUNE, SEEK, SCAN, AUTO  
SELECT, and the preset buttons.  
reproduction on AM is not available.  
CONTINUED  
197  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:22 32SAA650_201  
Audio System (C Type)  
TUNE － Use the TUNE bar to tune  
the radio to a desired frequency.  
Push the TUNE bar ▲ to tune to a  
higher frequency, or ▼ to tune to a  
lower frequency. Push the bar ▲ or  
▼ until the display reaches the  
desired frequency.  
SCAN － The SCAN function  
samples all the stations with strong  
signals on the selected band. To  
activate it, press the SCAN button,  
then release it. The system will scan  
up the band for a station with a  
strong signal. When it finds one, it  
will stop and play that station for  
approximately 10 seconds. If you do  
nothing, the system will then scan  
for the next strong station and play  
that for 10 seconds. When it plays a  
station that you want to continue  
listening to, press the SCAN button  
again.  
To store a frequency:  
1. Select the desired band.  
2. Use the TUNE, SEEK, or SCAN  
function to tune the radio to a  
desired station.  
SEEK － The SEEK function  
3. Pick the preset button you want  
for that station. Press the button  
and hold it until you hear a beep.  
searches the band for a station with  
a strong signal. To activate it, push  
the SEEK bar ▲ or ▼, then release  
it. Depending on which part of the  
SEEK bar you press, the system  
scans upward or downward from the  
current frequency. It stops when it  
finds a station with a strong signal.  
4. Repeat steps 1 to 3 to store the  
desired station in all six preset  
buttons.  
Preset － You can store the  
Once a station’s frequency is stored,  
simply press and release the proper  
preset button to tune to it.  
frequencies of your favourite radio  
stations in the six preset buttons.  
Each button will store one frequency  
on the AM band, and two  
The preset frequencies will be lost if  
your vehicle’s battery goes dead, is  
disconnected, or the audio fuse is  
removed.  
frequencies on the FM band.  
198  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:29 32SAA650_202  
Audio System (C Type)  
AUTO SELECT － If you are  
travelling far from home and can no  
longer receive the stations you  
preset, you can use the Auto Select  
feature to find stations in the local  
area.  
FM/AM BUTTON  
A.SEL BUTTON  
A.SEL  
INDICATOR  
To activate AUTO SELECT, press  
the A. SEL button. ‘‘A. SEL’’ will  
flash in the display, and the system  
will go into scan mode for several  
seconds. It automatically scans both  
bands, looking for stations with  
strong signals. It stores the  
frequencies of six AM stations and  
twelve FM stations in the preset  
buttons. You can then use the preset  
buttons to select those stations.  
PRESET BUTTONS  
With Auto Select on, you can  
manually store any frequencies in  
the preset buttons.  
Auto Select does not erase the  
frequencies that you preset  
previously. When you return home,  
turn off Auto Select by pressing the  
A. SEL button. The preset buttons  
will then select the frequencies you  
originally set.  
If you are in a remote area, Auto  
Select may not find six strong FM  
stations. If this happens, you will see  
a ‘‘0’’ displayed when you press any  
preset button that does not have a  
station stored.  
199  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:36 32SAA650_203  
Audio System (C Type)  
Radio Data System (RDS)  
With your audio system, you can  
utilize many convenient features  
provided by the Radio Data System  
(RDS).  
TP INDICATOR  
TA INDICATOR  
TA BUTTON  
With the FM band selected, you can  
keep listening to the same station  
even if its frequency changes as you  
enter different regions while you are  
travelling.  
The RDS function turns on auto-  
matically when you turn the system  
on. If the station you are listening to  
is an RDS station, the frequency  
display will disappear and the station  
name will be displayed. Then, the  
system will automatically keep  
selecting the frequency with the  
strongest signal from the frequen-  
cies that carry the same programs.  
This can save you the trouble of  
re-tuning to obtain the same station  
as long as you are in the same RDS  
network area.  
PRESET  
BUTTONS  
/VOL  
KNOB  
PTY/NEWS BUTTON  
200  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:48 32SAA650_204  
Audio System (C Type)  
You can turn the RDS functions on  
or off. To switch the function on or  
AF (Alternative Frequency)  
TA (Traffic Announcement Standby)  
Function  
When the TA button is pressed and  
released, ‘‘TA’’ will light on the  
display and the system will stand by  
for traffic announcements.  
It automatically selects a similar  
program as the one in play from  
another station in the adjacent area.  
off, press the  
/VOL knob for  
more than 2 seconds with the audio  
system on, then press the Preset 1  
(AF), or the Preset 2 (REG), or the  
Preset 3 (PS). To set the RDS  
REG (Regional Program)  
With this function selected, the radio  
‘‘knows’’ that certain broadcasters do  
not air the same programs at the  
same time. In REG mode, the radio  
remains turned into the regional  
program and will not change to  
another frequency to compensate for  
weak reception.  
functions on or off, press the  
VOL knob again.  
/
When a traffic information (TP)  
station is selected, ‘‘TP’’ will light on  
the display indicating that traffic  
reports can be received from this  
station. When the EON (Enhanced  
Other Network) TP station is  
selected, ‘‘TP’’ will also light on the  
display.  
When the signals of the RDS station  
become so weak that the system can  
no longer follow the station, the  
system will hold the last tuned  
frequency and the display will  
change from the station name to the  
frequency.  
PS (Program Service)  
If the station you are listening to is  
an RDS station, the frequency  
display will disappear and the station  
name or PTY information will be  
displayed. Press and release the  
PTY/NEWS button to switch the  
display information between the  
name of network/station and the  
PTY information (see page 203 for  
the PTY display information).  
EON information cross-references  
other program services that  
broadcast traffic information, and  
when EON information is received,  
traffic reports can be received  
through another program service.  
In some countries, you cannot utilize  
features provided by RDS as the  
RDS function is not provided in all  
stations.  
CONTINUED  
201  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:54 32SAA650_205  
Audio System (C Type)  
You can receive traffic information  
while you are listening to a CD. If the  
system is tuned to a TP or EON TP  
station before playing a CD, the  
system will stand by for traffic  
announcements by pressing the TA  
button (‘‘TA’’ indicator ON) and the  
system will switch from CD to the  
traffic announcement when it begins.  
The system will return to the CD  
mode when the traffic information is  
finished.  
TP INDICATOR  
TA INDICATOR  
TA BUTTON  
FM/AM  
BUTTON  
NEWS  
INDICATOR  
To turn off the TA function, press  
the TA button again. ‘‘TA’’ will go out  
from the display.  
If you use SEEK or Auto Select with  
the TA function ON, the system  
searches only TP or EON TP  
stations.  
PTY/NEWS BUTTON  
SEEK BAR  
202  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:36:59 32SAA650_206  
Audio System (C Type)  
PTY Display Function  
AFFAIRS : Topical programs  
expanding upon the news.  
CLASSICS : Serious classics;  
performances of major orchestral  
works.  
SCIENCE : Programs about nature,  
science, and technology.  
SPORT : Programs concerned with  
any aspect of sports.  
VARIED : Light entertainment  
programs.  
When the PTY/NEWS button is  
pressed for more than 2 seconds, the  
PTY display function comes on. This  
function lets you know the type of  
programs the selected RDS station is  
broadcasting. For example, if the  
station is broadcasting dramas,  
‘‘DRAMA’’ is shown in the display. If  
it is a station of scientific programs,  
‘‘SCIENCE’’ will be shown. The  
principal PTYs are shown in the  
following.  
CULTURE : Programs concerned  
with any aspect of national or  
regional culture.  
DRAMA : All radio plays and serials.  
EASY MUS : M.O.R MUSIC.  
EDUCATE : Educational programs.  
INFO : General information and  
advice.  
L.CLASS : Light classics; classical  
music for non-specialist appreciation.  
NEWS : Short accounts of facts,  
events, publicly expressed views,  
reportage, etc.  
OTH MUS : Other types of music,  
such as Jazz, R & B, Folk, Country,  
Reggae.  
POP MUS : Commercial music of  
popular appeal.  
ROCK MUS : Contemporary modern  
music.  
CONTINUED  
203  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:06 32SAA650_207  
Audio System (C Type)  
After you select the desired program  
type, the system will search for a  
station with the same PTY code as  
the selected program type. When  
you use this function for the first  
time, ‘‘NEWS’’ will appear as it was  
preset at the factory.  
While a PTY is displayed, you can  
use the SEEK bar to find a station of  
the desired PTY. When you press  
either side of the SEEK bar, the  
After your desired PTY is displayed,  
press either side of the SEEK bar  
again within 5 seconds. The system  
will go into the PTY search mode  
display will show different PTYs (see and it will search for a station of the  
the PTYs list on the previous page).  
selected PTY. If there is no station  
available in the selected PTY, ‘‘NO  
PTY’’ is displayed for about 5  
seconds and the PTY search mode is  
cancelled.  
The PTY setting mode is cancelled if  
no further steps are taken within 5  
seconds after selecting the desired  
PTY by operating the SEEK bar.  
If the selected RDS station does not  
transmit PTY data, ‘‘NO PTY’’ is  
displayed. When the selected station  
is not an RDS station, ‘‘NO RDS’’ is  
displayed for about 5 seconds. The  
PTY display function turns off and  
the display returns to normal if no  
further steps are taken.  
Some stations may broadcast the  
programs with contents different  
from their PTY code.  
In the PTY search mode, the tuning  
step is set to 50 kHz while searching  
the FM band. This step changes to  
100 kHz when the AF or TA function  
is activated.  
204  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:12 32SAA650_208  
Audio System (C Type)  
PTY/News Interrupt Function  
To activate this function, press the  
PTY/NEWS button for more than 2  
seconds and select ‘‘NEWS.’’ The  
system will hold the last tuned FM  
station/network PTY while you are  
listening to the CD. With this  
function on, playing the CD is  
interrupted and the system switches  
from CD mode to the FM newscast  
when the newscast is broadcasting  
from the FM station.  
Your audio system has other  
PTY Alarm  
interrupt functions (including TA  
function). The interrupt function  
first activated has priority over the  
PTY code ‘‘ALARM’’ is used for  
emergency announcements, such as  
natural disasters. When this code is  
others and the indication of the other received, ‘‘ALARM’’ comes on the  
interrupt function goes out. To  
activate the other interrupt function,  
turn off the currently activated  
interrupt function.  
display and the volume is changed.  
When the alarm is cancelled, the  
system will return to the normal  
operation mode.  
When the program is changed to  
another program or the frequency  
cannot be received for 10 seconds  
due to weak signal, the system will  
return to the CD mode automatically.  
205  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:25 32SAA650_209  
Audio System (C Type)  
Adjusting the Sound  
H BUTTON  
M BUTTON  
Bass, Treble, Fader, and Balance are  
each adjustable. You select which of  
these you want to adjust by pressing  
the  
/
button. The mode  
changes from BAS to TRE to FAD to  
BAL, and then back to BAS each  
time you press the button. Each  
mode is shown in the display as it  
changes.  
R BUTTON  
/
BUTTON  
Balance/Fader － These two  
modes adjust the strength of the  
sound coming from each speaker.  
BAL adjusts the side-to-side strength,  
while FAD adjusts the front-to-back  
strength.  
/VOL KNOB  
Treble/Bass － Use these modes to  
As you adjust a mode, you will hear a  
beep whenever the adjustment level  
reaches the centre, maximum, or  
minimum of its range. The system  
will automatically return the display  
to normal mode about 5 seconds  
after you stop adjusting a mode with  
Select BAL or FAD by pressing the  
adjust the tone to your liking. Select  
/
button. Adjust the  
TRE or BAS by pressing the  
button. Adjust the desired  
/
Balance or Fader to your liking by  
turning the  
adjustment level is shown on the  
display.  
/VOL knob. The  
mode by turning the  
/VOL  
knob. The adjustment level is shown  
on the display.  
the  
/VOL knob.  
206  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:33 32SAA650_210  
Audio System (C Type)  
Digital Clock  
To set the hours, press and hold the  
H (Preset 4) button until the hour  
advances to the desired time.  
For example:  
The display of your audio system  
usually shows the time when the  
ignition switch is in the  
ACCESSORY (I) or the ON (II)  
position.  
1:06 would RESET to 1:00  
1:52 would RESET to 2:00  
To set the minutes, press and hold  
the M (Preset 5) button until the  
numbers advance to the desired time. setting will be lost. To set the time  
again, follow the setting procedure.  
If your vehicle’s battery is  
disconnected or goes dead, the time  
To set the time, press the  
/
button for more than 2 seconds You can use the R (Preset 6) button  
until you hear a beep. The time  
display will begin blinking.  
to quickly set the time to the nearest  
hour. Press the R (Preset 6) button.  
If the displayed time is before the  
half hour, pressing R (Preset 6) sets  
the clock back to the previous hour.  
If the displayed time is after the half  
hour, pressing R (Preset 6) sets the  
clock forward to the beginning of the  
next hour.  
207  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:43 32SAA650_211  
Audio System (C Type)  
Operating the CD Player  
You operate the CD player with the  
same controls used for the radio.  
SCAN/RPT BUTTON  
SCAN INDICATOR RDM BUTTON  
FM/AM BUTTON  
With the ignition switch in the  
ACCESSORY (I) or the ON (II)  
position, insert the disc into the CD  
slot. Push the disc in halfway, the  
drive will pull it in the rest of the way  
and begin to play. The number of the  
track that is playing is shown in the  
display.  
EJECT  
BUTTON  
RDM  
CD/AUX  
BUTTON  
INDICATOR  
RPT  
INDICATOR  
TUNE BAR  
You can also play 8-cm (3-in) discs  
without using an adapter ring. You  
should not try to use an adapter ring.  
This may cause the audio system to  
damage or malfunction.  
SEEK/SKIP BAR  
/VOL KNOB  
In all cases, play only standard round  
discs. Odd-shaped CDs may jam in  
the drive or cause other problems.  
When the system reaches the end of  
the disc, it will return to the begin-  
ning and play the disc again.  
For best results when using CD-R/  
CD-RW discs, use only high quality  
discs labelled for audio use. When  
recording a CD-R/CD-RW, the  
recording must be closed in order  
for the disc to be used by CD players. The label can curl up and cause the  
disc to jam in the unit.  
Do not use discs with adhesive labels.  
208  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:51 32SAA650_212  
Audio System (C Type)  
You can switch to the radio while a  
CD is playing by pressing the FM/  
AM button. Press the CD/AUX  
button to return to playing the CD.  
The CD will begin playing where it  
left off.  
You can use the TUNE bar or the  
SEEK/SKIP bar while a disc is  
playing to select passages or to  
change tracks.  
Each time you push and release the  
SEEK/SKIP bar ▲, the system skips  
forward to the beginning of the next  
track. Push and release ▼ to skip  
backward to the beginning of the  
current track. Push it again to skip to  
the beginning of the previous track.  
To move rapidly within a track, push  
and hold the TUNE bar or the  
SEEK/SKIP bar. Push and hold ▲ to  
move forward. Press and hold ▼ to  
move backward. Release the bar  
when the system reaches the point  
you want.  
If you turn the system off while a CD  
is playing, either with the  
/VOL  
With a disc playing, you can use the  
REPEAT, RANDOM and SCAN  
functions.  
knob or by turning off the ignition  
switch, the disc will stay in the drive.  
When you turn the system back on,  
the CD will begin playing where it  
left off.  
Press the EJECT button to remove  
the disc from the drive.  
If you eject the disc, but do not  
remove it from the slot, the system  
will automatically reload the disc  
after 10 seconds and put the CD  
player in pause mode. To begin  
playing the disc, press the CD/AUX  
button.  
CONTINUED  
209  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:37:57 32SAA650_213  
Audio System (C Type)  
REPEAT － To activate the Repeat  
SCAN － This feature, when  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225.  
feature, press the SCAN/RPT button activated, samples all the tracks on  
for more than 2 seconds. You will  
see RPT in the display. The system  
continuously replays the current  
track. Press the SCAN/RPT button  
for more than 2 seconds again to  
turn it off.  
the CD in the order they are  
recorded on the CD. To activate the  
Scan feature, select the Scan mode  
by pressing the SCAN/RPT button.  
You will see SCAN in the display.  
The system will then play the first  
track approximately 10 seconds. If  
you do nothing, the system will then  
play the following tracks for 10  
seconds each. When it plays a track  
that you want to continue listening to,  
press the SCAN/RPT button again.  
After all tracks on that disc are  
sampled, the SCAN mode is  
RANDOM PLAY － This feature,  
when activated, plays the tracks on  
the CD in random order, rather than  
in the order they are recorded on the  
CD. To activate Random Play, press  
and release the RDM button. You  
will see RDM in the display. The  
system will then select and play  
tracks randomly. This continues  
until you deactivate Random Play by  
pressing RDM again.  
cancelled. Pressing the SCAN/RPT  
button again will also deactivate this  
feature.  
210  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:04 32SAA650_214  
Audio System (C Type)  
CD Player Error Indications  
If you see an error indication in the  
display while operating the CD  
player, find the cause in the chart to  
the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the EJECT button and pull out the disc.  
Check if the disc is inserted correctly in the CD  
player.  
Make sure the disc is not scratched or damaged.  
Press the EJECT button and pull out the disc.  
Check the disc for damage or deformation.  
If the CD cannot be pulled out or the error  
indication does not disappear after the disc is  
ejected, see your dealer.  
Do not try to force the disc out of the player.  
Consult your dealer.  
Will disappear when the temperature returns to  
normal.  
FOCUS Error  
Mechanical Error  
High temperature  
211  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:13 32SAA650_215  
Audio System (C Type)  
Operating the CD Changer  
(Optional)  
To select a different disc, press the  
DISC ＋ (Preset 6) or DISC －  
(Preset 5) button. The next disc in  
the changer is loaded and played  
when you press the DISC ＋ button.  
DISC － loads and plays the previous  
disc. If you select an empty slot in  
the magazine, the changer will, after  
finding that slot empty, try to load  
the CD in the next slot. This  
If you eject the in-dash CD while it is  
playing, the system will automatically  
switch to the CD changer and begin  
play where it left off. If there are no  
CDs in the changer, the display will  
flash. You will have to select another  
mode (AM or FM) with the FM/AM  
button.  
A Compact Disc changer is available  
for your vehicle. It holds up to 6  
discs, providing several hours of  
continuous entertainment. You  
operate this CD changer with the  
same controls used for the in-dash  
CD player.  
When you switch back to CD mode,  
the system selects the same unit (in-  
dash or changer) that was playing  
when you switched out of CD mode.  
Load the desired CDs in the  
magazine and load the magazine in  
the changer according to the  
continues until it finds a CD to load  
and play.  
instructions that came with the unit.  
Play only standard round discs. Odd-  
shaped CDs may jam in the drive or  
cause other problems.  
If you load a CD in the in-dash player  
while the changer is playing a CD,  
the system will stop the changer and  
begin playing the in-dash CD. To  
select the changer again, press the  
CD/AUX button. Play will begin  
where it left off. Use the CD/AUX  
button to switch between the player  
and the changer.  
To use the SKIP, REPEAT, and  
RANDOM functions, refer to the in-  
dash player operating instructions.  
Press the CD/AUX button. You will  
see ‘‘CD’’ in the display. The system  
will start to play the first track of the  
first disc. When that disc ends, the  
next disc in the magazine is loaded  
and played. After the last disc  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225 .  
finishes, the system returns to disc 1.  
212  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:20 32SAA650_216  
Audio System (C Type)  
CD Changer Error Indications  
If you see an error indication in the  
display while operating the CD  
changer, find the cause in the chart  
to the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
FOCUS Error  
Press the magazine eject button and pull out  
the magazine, check for error indication. Insert  
the magazine again. If the code does not  
disappear or the magazine cannot be pulled out,  
consult your dealer.  
Mechanical Error  
High temperature  
Will disappear when the temperature returns to  
normal.  
No CD magazine in the  
CD changer  
Insert CD magazine.  
213  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:27 32SAA650_217  
Audio System (D Type)  
Your audio system provides clear  
reception on each band while the  
preset buttons allow you to easily  
select your favourite stations.  
SCAN BUTTON  
A.SEL BUTTON  
FM BUTTON  
ST INDICATOR  
SCAN INDICATOR  
A.SEL INDICATOR  
Operating the Radio  
The ignition switch must be in the  
ACCESSORY (I) or the ON (II)  
position to operate the audio system.  
Turn the system on by pushing the  
VOL/PWR knob, the AM or FM  
button or CD button. Adjust the  
volume by turning the knob.  
TUNE/SEEK/SKIP  
BUTTONS  
VOL/PWR  
BUTTON  
PRESET BUTTONS  
AM BUTTON  
The band and frequency that the  
radio was last tuned to is displayed.  
To change bands, press the AM or  
FM button. On the FM band, ST will  
be displayed if the station is broad-  
casting in stereo. Stereo  
You can use any of five methods to  
find radio stations on the selected  
band: TUNE, SEEK, SCAN, AUTO  
SELECT, and the preset buttons.  
reproduction on AM is not available.  
214  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:39 32SAA650_218  
Audio System (D Type)  
TUNE － Use the TUNE/SEEK/  
SKIP buttons to tune the radio to a  
desired frequency. Press the  
button to tune to a higher  
SCAN － The SCAN function  
To store a frequency:  
samples all the stations with strong  
signals on the selected band. To  
activate it, press the SCAN button,  
1. Select the desired band.  
frequency, or the  
button to tune then release it. You will see SCAN in  
the display. The system will scan up  
2. Use the TUNE, SEEK, or SCAN  
function to tune the radio to a  
desired station.  
to a lower frequency.  
the band for a station with a strong  
SEEK － The SEEK function  
signal. When it finds one, it will stop  
and play that station for  
searches the band for a station with  
a strong signal. To activate it, press  
the TUNE/SEEK/SKIP buttons on  
3. Pick the preset button you want  
for that station. Press the button  
and hold it until you hear a beep.  
approximately 5 seconds. If you do  
nothing, the system will then scan  
for the next strong station and play  
that for 5 seconds. When it plays a  
station that you want to continue  
listening to, press the SCAN button  
again.  
either the  
or  
side until you  
hear a beep, then release it.  
Depending on which side you press,  
the system scans upward or down-  
ward from the current frequency. It  
stops when it finds a station with a  
strong signal.  
4. Repeat steps 1 to 3 to store the  
desired station in all six preset  
buttons.  
Once a station’s frequency is stored,  
simply press and release the proper  
preset button to tune to it.  
Preset － You can store the  
frequencies of your favourite radio  
stations in the six preset buttons.  
Each button will store one frequency  
on the AM band, and two  
The preset frequencies will be lost if  
your vehicle’s battery goes dead, is  
disconnected, or the audio fuse is  
removed.  
frequencies on the FM band.  
CONTINUED  
215  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:46 32SAA650_219  
Audio System (D Type)  
AUTO SELECT － If you are  
travelling far from home and can no  
longer receive the stations you  
preset, you can use the Auto Select  
feature to find stations in the local  
area.  
A.SEL BUTTON  
FM BUTTON  
A.SEL INDICATOR  
To activate AUTO SELECT, press  
the A. SEL button. ‘‘A. SEL’’ will  
flash in the display, and the system  
will go into scan mode for several  
seconds. It automatically scans both  
bands, looking for stations with  
strong signals. It stores the  
frequencies of six AM stations and  
twelve FM stations in the preset  
buttons. You can then use the preset  
buttons to select those stations.  
PRESET BUTTONS  
AM BUTTON  
With Auto Select on, you can  
manually store any frequencies in  
the preset buttons.  
Auto Select does not erase the  
frequencies that you preset  
previously. When you return home,  
turn off Auto Select by pressing the  
A. SEL button. The preset buttons  
will then select the frequencies you  
originally set.  
If you are in a remote area, Auto  
Select may not find six strong AM  
stations or twelve strong FM stations.  
If this happens, you will see a ‘‘0’’  
displayed when you press any preset  
button that does not have a station  
stored.  
216  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:38:54 32SAA650_220  
Audio System (D Type)  
Adjusting the Sound  
Bass, Treble, Fader, and Balance are  
each adjustable. You select which of  
these you want to adjust by pressing  
the SOUND button. The mode  
changes from BAS to TRE to FAD to  
BAL, and then back to BAS each  
time you press the button. Each  
mode is shown in the display as it  
changes.  
VOL/PWR KNOB  
Balance/Fader － These two  
modes adjust the strength of the  
sound coming from each speaker.  
BAL adjusts the side-to-side strength,  
while FAD adjusts the front-to-back  
strength.  
H BUTTON  
R BUTTON  
CLOCK BUTTON  
SOUND BUTTON  
M BUTTON  
Treble/Bass － Use these modes to  
The system will automatically return  
the display to the selected audio  
Select BAL or FAD by pressing the  
SOUND button. Adjust the Balance  
or Fader to your liking by turning  
the VOL/PWR knob. The  
adjustment level is shown on the  
display.  
adjust the tone to your liking. Select  
TRE or BAS by pressing the SOUND mode about 5 seconds after you stop  
button. Adjust the desired mode by  
turning the VOL/PWR knob. The  
adjustment level is shown on the  
display.  
adjusting a mode with the VOL/  
PWR knob.  
217  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:01 32SAA650_221  
Audio System (D Type)  
Digital Clock  
You can use the R (Preset 6) button  
to quickly set the time to the nearest  
hour. Press the R (Preset 6) button.  
If the displayed time is before the  
half hour, pressing R (Preset 6) sets  
the clock back to the previous hour.  
If the displayed time is after the half  
hour, pressing R (Preset 6) sets the  
clock forward to the beginning of the  
next hour.  
If your vehicle’s battery is  
The display of your audio system  
usually shows the time when the  
ignition switch is in the  
ACCESSORY (I) or the ON (II)  
position.  
disconnected or goes dead, the time  
setting will be lost. To set the time  
again, follow the setting procedure.  
To set the time, press the CLOCK  
button for more than 2 seconds until  
you hear a beep. The time display  
will begin blinking.  
For example:  
1:06 will reset to 1:00  
1:52 will reset to 2:00  
To set the hours, press and hold the  
H (Preset 4) button until the hour  
advances to the desired time.  
To set the minutes, press and hold  
the M (Preset 5) button until the  
numbers advance to the desired time.  
218  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:10 32SAA650_222  
Audio System (D Type)  
Operating the CD Player  
You operate the CD player with the  
same controls used for the radio.  
SCAN BUTTON  
FM BUTTON  
EJECT BUTTON  
With the ignition switch in the  
ACCESSORY (I) or the ON (II)  
position, insert the disc into the CD  
slot. Push the disc in halfway, the  
drive will pull it in the rest of the way  
and begin to play. The number of the  
track that is playing is shown in the  
display.  
TUNE/SEEK/SKIP  
BUTTONS  
VOL/PWR  
KNOB  
RDM  
CD BUTTON  
For best results when using CD-R/  
CD-RW discs, use only high quality  
discs labelled for audio use. When  
recording a CD-R/CD-RW, the  
recording must be closed in order  
BUTTON  
AM BUTTON  
RPT BUTTON  
In all cases, play only standard round  
for the disc to be used by CD players. discs. Odd-shaped CDs may jam in  
the drive or cause other problems.  
When the system reaches the end of  
the disc, it will return to the begin-  
ning and play the disc again.  
You cannot load and play 8-cm (3-in)  
Do not use discs with adhesive labels. discs in this system.  
The label can curl up and cause the  
disc to jam in the unit.  
CONTINUED  
219  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:19 32SAA650_223  
Audio System (D Type)  
You can switch to the radio while a  
CD is playing by pressing the AM or  
FM button. Press the CD button to  
return to playing the CD. The CD  
will begin playing where it left off.  
You can use the TUNE/SEEK/SKIP  
buttons while a disc is playing to  
select passages and change tracks.  
With a disc playing, you can use the  
REPEAT, RANDOM and SCAN  
functions.  
To move rapidly within a track, press  
and hold the TUNE/SEEK/SKIP  
If you turn the system off while a CD  
is playing, either with the VOL/PWR  
knob or by turning off the ignition  
switch, the disc will stay in the drive.  
When you turn the system back on,  
the CD will begin playing where it  
left off.  
buttons. Press the  
forward. Press the  
side to move  
side to move  
backward. Release the button when  
the system reaches the point you  
want.  
Each time you press and release the  
side of the TUNE/SEEK/SKIP  
buttons, the system skips forward to  
the beginning of the next track.  
Press the EJECT button to remove  
the disc from the drive.  
Press and release the  
side to  
If you eject the disc, but do not  
remove it from the slot, the system  
will automatically reload the disc  
after 15 seconds and put the CD  
player in pause mode. To begin  
playing the disc, press the CD button.  
skip backward to the beginning of  
the current track. Press it again to  
skip to the beginning of the previous  
track.  
220  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:24 32SAA650_224  
Audio System (D Type)  
REPEAT － To activate the Repeat  
feature, press the RPT (preset 4)  
button. You will see RPT in the  
display. The system continuously  
replays the current track. Press the  
RPT button again to turn it off.  
SCAN － This feature, when  
Protecting Compact Discs  
For information on how to handle  
and protect compact discs, see page  
225 .  
activated, samples all the tracks on  
the CD in the order they are  
recorded on the CD. To activate the  
Scan feature, select the Scan mode  
by pressing the SCAN button. You  
will see SCAN in the display. The  
system will then play the first track  
approximately 10 seconds. If you do  
nothing, the system will then play  
the following tracks for 10 seconds  
each. When it plays a track that you  
want to continue listening to, press  
the SCAN button again. After all  
tracks on that disc are sampled, the  
SCAN mode is cancelled. Pressing  
the SCAN button again will also  
deactivate this feature.  
RANDOM PLAY － This feature,  
when activated, plays the tracks on  
the CD in random order, rather than  
in the order they are recorded on the  
CD. To activate Random Play, press  
the RDM (preset 3) button. You will  
see RDM in the display. The system  
will then select and play tracks  
randomly. This continues until you  
deactivate Random Play by pressing  
RDM again.  
221  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:31 32SAA650_225  
Audio System (D Type)  
CD Player Error Indications  
If you see an error indication in the  
display while operating the CD  
player, find the cause in the chart to  
the right. If you cannot clear the  
error indication, take the vehicle to  
your dealer.  
Indication  
Cause  
Solution  
Press the EJECT button and pull out the disc.  
Check if the disc is inserted correctly in the CD  
player.  
Make sure the disc is not scratched or damaged.  
Press the EJECT button and pull out the disc.  
Check the disc for damage or deformation.  
If the CD cannot be pulled out or the error  
indication does not disappear after the disc is  
ejected, see your dealer.  
Do not try to force the disc out of the player.  
Consult your dealer.  
Will disappear when the temperature returns to  
normal.  
FOCUS Error  
Mechanical Error  
High temperature  
222  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:41 32SAA650_226  
Audio System  
Radio Frequencies  
Radio Reception  
(Mexico model)  
(Mexico model)  
Your vehicle’s radio can receive the  
complete AM and FM bands.  
Those bands cover these frequen-  
cies:  
How well your vehicle’s radio  
receives stations is dependent on  
many factors, such as the distance  
from the station’s transmitter,  
nearby large objects, and atmos-  
pheric conditions.  
AM band:  
530 to 1,710 kilohertz  
FM band:  
A radio station’s signal gets weaker  
as you get farther away from its  
transmitter. If you are listening to an  
AM station, you will notice the sound  
volume becoming weaker, and the  
station drifting in and out. If you are  
listening to an FM station, you will  
see the stereo indicator flickering off  
and on as the signal weakens.  
87.7 to 107.9 megahertz  
Radio stations on the AM band are  
assigned frequencies at least ten  
kilohertz apart (530, 540, 550).  
Stations on the FM band are  
assigned frequencies at least 0.2  
megahertz apart (87.9, 88.1, 88.3).  
Driving very near the transmitter of  
a station that is broadcasting on a  
frequency close to the frequency of  
the station you are listening to can  
also affect your radio’s reception.  
You may temporarily hear both  
stations, or hear only the station you  
are close to.  
Eventually, the stereo indicator will  
go off and the sound will fade  
completely as you get out of range of  
Stations must use these exact  
frequencies. It is fairly common for  
stations to round-off the frequency in the station’s signal.  
their advertising, so your radio could  
display a frequency of 100.9 even  
though the announcer may identify  
the station as ‘‘FM101.’’  
CONTINUED  
223  
Comfort and Convenience Features  
Downloaded from engine  
07/09/13 18:21:57 32SAA650_227  
Audio System  
As required by the FCC:  
Changes or modifications not expressly  
approved by the party responsible for  
compliance could void the user’s  
authority to operate the equipment.  
Radio signals, especially on the FM  
band, are deflected by large objects  
such as buildings and hills. Your  
radio then receives both the direct  
signal from the station’s transmitter,  
and the deflected signal. This causes  
the sound to distort or flutter. This is  
a main cause of poor radio reception  
in city driving.  
Radio reception can be affected by  
atmospheric conditions such as  
thunderstorms, high humidity, and  
even sunspots. You may be able to  
receive a distant radio station one  
day and not receive it the next day  
because of a change in conditions.  
Electrical interference from passing  
vehicles and stationary sources can  
cause temporary reception problems.  
224  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:39:55 32SAA650_228  
Audio System  
Protecting Compact Discs  
Handle a CD by its edges; never  
touch either surface. Do not place  
stabilizer rings or labels on the CD.  
These, along with contamination  
from fingerprints, liquids, and felt-tip  
pens, can cause the CD to not play  
properly, or possibly jam in the drive.  
When a CD is not being played, store  
it in its case to protect it from dust  
and other contamination. To prevent  
warpage, keep CDs out of direct  
sunlight and extreme heat.  
A new CD may be rough on the  
inner and outer edges. The small  
plastic pieces causing this roughness  
can flake off and fall on the re-  
cording surface of the disc, causing  
skipping or other problems. Remove  
To clean a disc, use a clean soft cloth. these pieces by rubbing the inner  
Wipe across the disc from the centre  
to the outside edge.  
and outer edges with the side of a  
pencil or pen.  
Never try to insert foreign objects in  
the CD player or the magazine.  
225  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:40:02 32SAA650_229  
Audio System  
Remote Audio Controls  
(For some types)  
The VOL button adjusts the volume  
up (▲) or down (▼). Press the top  
or bottom of the button and hold it  
until the desired volume is reached,  
then release it.  
If you are playing a CD, the system  
skips to the beginning of the next  
track each time you press the top  
(＋) of the CH button. Press the  
bottom (－) to return to the  
MODE BUTTON  
beginning of the current track. Press  
it again to return to the previous  
track. You will see the disc and track  
number in the display.  
The MODE button changes the  
mode. Pressing the button  
repeatedly selects FM1, FM2, AM or  
CD (if a CD is loaded).  
If you are listening to the radio, use  
the CH button to change stations.  
Each time you press the top (＋) of  
the button, the system goes to the  
next preset station on the band you  
are listening to. Press the bottom  
(－) to go back to the previous  
preset station.  
VOL BUTTON  
CH BUTTON  
Three controls for the audio system  
are mounted in the steering wheel  
hub. These let you control basic  
functions without removing your  
hand from the wheel.  
226  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:40:07 32SAA650_230  
Audio System  
Auxiliary Input Jack  
(For some types)  
AUXILIARY INPUT JACK  
Auxiliary Input Jack is on the centre  
console panel. The system will  
accept auxiliary input from standard  
audio accessories.  
When the appropriate audio unit is  
connected with the auxiliary input  
jack, press the AUX button to select  
the unit.  
227  
Comfort and Convenience Features  
Downloaded from engine  
07/09/12 09:40:10 32SAA650_231  
228  
Downloaded from engine  

Related Topics

Heating and Cooling What Each Control Does To Turn Everything Off Climate Control System Fully-automatic Operation Semi-automatic Operation Sunlight Sensor/Temperature Sensor Audio System Remote Audio Controls Auxiliary Input Jack

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot