07/09/12 09:30:51 32SAA650_155
Heating and Cooling
How to Use the System
It is best to leave the system in Fresh
Ventilation
This section covers how to set up the
system controls for ventilation,
heating, cooling, dehumidifying, and
defrosting.
Air mode under almost all conditions. The flow-through ventilation
system
Keeping the system in Recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to Recirculation mode when
you are driving through smoky or
dusty conditions, then switch back to
Fresh Air mode when the conditions
clear.
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the tailgate.
The engine must be running for the
heater and air conditioning to
generate hot and cold air. The heater
uses engine coolant to warm the air.
If the engine is cold, it will be several
minutes before you feel warm air
coming from the system.
1. Turn the temperature control dial
all the way to the left.
Make sure the A/C is off.
2. Select
and Fresh Air mode.
3. Set the fan to the desired speed.
The outside air intakes for the
heating and cooling system are at
the base of the windscreen. Keep
these clear of leaves and other
debris.
To Cool with A/C
(For some types)
The air conditioning does not rely on
engine temperature.
1. Turn on the A/C by pressing the
button. The light in the button
comes on when a fan speed is
selected.
2. Make sure the temperature
control dial is all the way to the left.
3. Select
.
4. If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
5. Set the fan to the desired speed.
152
Comfort and Convenience Features