2016-2020 Honda Jazz 4 Door Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 475 ページ 2017年8月23日 水曜日 午前11時24分  
Maintenance  
This chapter discusses basic maintenance.  
Before Performing Maintenance  
Adding Engine Oil............................ 493  
Tyre Rotation................................... 519  
Snow Traction Devices..................... 520  
Battery............................................... 522  
Remote Transmitter Care  
Engine Coolant................................ 494  
Transmission Fluid............................ 496  
Brake/Clutch* Fluid.......................... 497  
Refilling Window Washer Fluid......... 498  
Fuel Filter......................................... 498  
Replacing Light Bulbs....................... 499  
Checking and Maintaining Wiper  
Blades .......................................... 511  
Checking and Maintaining Tyres  
Checking Tyres ................................ 515  
Wear Indicators................................ 517  
Tyre Service Life ............................... 517  
Tyre and Wheel Replacement........... 518  
Inspection and Maintenance ............476  
Safety When Performing Maintenance..... 477  
Parts and Fluids Used in Maintenance  
Service ...........................................478  
Service Reminder System.................479  
Replacing the Button Battery ........... 527  
*
Heating and Cooling System /Climate Control  
*
*
Maintenance Schedule ...................484  
System Maintenance.............................529  
Cleaning  
Maintenance Record (On vehicles without  
Service Book) .................................487  
Maintenance Under the Bonnet  
Maintenance Items Under the Bonnet...... 488  
Opening the Bonnet ........................489  
Recommended Engine Oil ................490  
Oil Check.........................................492  
Interior Care .................................... 532  
Exterior Care.................................... 534  
Accessories and Modifications ........ 537  
Accessories...................................... 537  
Modifications................................... 537  
* Not available on all models  
475  
18 FIT JAZZ-32T5A6100.book 476 ページ 2017年8月23日 水曜日 午前11時24分  
Before Performing Maintenance  
Inspection and Maintenance  
For your safety, perform all listed inspections and maintenance to keep your vehicle  
in good condition. If you become aware of any abnormality (noise, smell, insufficient  
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.  
Refer to the Service Book that came with your vehicle/maintenance schedule in this  
owner’s manual for detailed maintenance and inspection information.  
*
2 Maintenance Schedule P. 484  
Types of Inspection and Maintenance  
Daily inspections  
Perform inspections before long distance trips, when washing the vehicle, or when  
refueling.  
Periodic inspections  
Check the brake fluid level monthly.  
2 Brake/Clutch* Fluid P. 497  
Check the tyre pressure monthly. Examine the tread for wear and foreign objects.  
2 Checking and Maintaining Tyres P. 515  
Check the operation of the exterior lights monthly.  
2 Replacing Light Bulbs P. 499  
Check the condition of the wiper blades at least every six months.  
2 Checking and Maintaining Wiper Blades P. 511  
* Not available on all models  
476  
18 FIT JAZZ-32T5A6100.book 477 ページ 2017年8月23日 水曜日 午前11時24分  
uuBefore Performing MaintenanceuSafety When Performing Maintenance  
Safety When Performing Maintenance  
Some of the most important safety precautions are given here.  
However, we cannot warn you of every conceivable hazard that can arise in  
performing maintenance. Only you can decide whether you should perform a given  
task.  
1Safety When Performing Maintenance  
3
WARNING  
Improperly maintaining this vehicle or  
failing to correct a problem before driving  
can cause a crash in which you can be  
seriously hurt or killed.  
Maintenance Safety  
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames  
away from the battery and all fuel related parts.  
Always follow the inspection and  
maintenance recommendations and  
schedules in this owner's manual/Service  
Book.  
Never leave rags, towels, or other flammable objects under the bonnet.  
u Heat from the engine and exhaust can ignite them, causing a fire.  
To clean parts, use a commercially available degreaser or parts cleaner, not petrol.  
Wear eye protection and protective clothing when working with the battery or  
compressed air.  
3
WARNING  
Engine exhaust contains carbon monoxide, which is poisonous and can kill you.  
u Only operate the engine if there is sufficient ventilation.  
Failure to properly follow maintenance  
instructions and precautions can cause you  
to be seriously hurt or killed.  
Vehicle Safety  
The vehicle must be in a stationary condition.  
u Make sure your vehicle is parked on level ground, the parking brake is set, and  
the engine is off.  
Always follow the procedures and  
precautions in this owner's manual.  
Be aware that hot parts can burn you.  
u Make sure to let the engine and exhaust system cool thoroughly before  
touching vehicle parts.  
Be aware that moving parts can injure you.  
u Do not start the engine unless instructed, and keep your hands and limbs away  
from moving parts.  
u Do not open the bonnet while the Auto Idle Stop function is activated.  
477  
18 FIT JAZZ-32T5A6100.book 478 ページ 2017年8月23日 水曜日 午前11時24分  
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service  
Parts and Fluids Used in Maintenance Service  
The use of Honda genuine parts and fluids is recommended when maintaining and  
servicing your vehicle. Honda genuine parts are manufactured according to the  
same high quality standards used in Honda vehicles.  
About Your Maintenance Service  
If the service reminder system is available in your vehicle, you are informed by the  
multi-information display when your vehicle’s maintenance services are due. Refer  
to Service Book that came with your vehicle for an explanation of the service item  
codes that appear on the display.  
1About Your Maintenance Service  
Models with service reminder system  
If you are planning to take your vehicle outside the  
service reminder system applied countries, consult a  
dealer for how to record your service reminder  
information and schedule your maintenance service  
under the conditions of that country.  
2 Service Reminder System P. 479  
If the service reminder system is not available, follow the maintenance schedules in  
the Service Book that came with your vehicle.  
If your vehicle is without the Service Book, follow the maintenance schedule in this  
owner’s manual.  
*
2 Maintenance Schedule P. 484  
* Not available on all models  
478  
18 FIT JAZZ-32T5A6100.book 479 ページ 2017年8月23日 水曜日 午前11時24分  
Service Reminder System  
Provides information of which service items are to be performed. Service items are  
represented by a code and icon. The system tells you when to take your vehicle to a  
dealer by days remaining.  
1Service Reminder System  
You can choose to have a corresponding warning  
message displayed with the warning icon on the  
multi-information display.  
When the next maintenance service timing is near, coming or passed, a warning  
icon will also appear on the multi-information display every time you turn the  
ignition switch to ON (w*1.  
The maintenance schedule may not display correct  
information if you disconnect the battery for an  
extended period. If this occurs, see a dealer.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
479  
18 FIT JAZZ-32T5A6100.book 480 ページ 2017年8月23日 水曜日 午前11時24分  
uuService Reminder Systemu  
1Displaying the Service Reminder Information  
Displaying the Service Reminder Information  
1. Turn the ignition switch to ON (w*1.  
Based on engine operating conditions and engine oil  
conditions, the system calculates the remaining days  
before the next service is to be performed.  
2. Press the  
(information) button repeatedly until the maintenance item(s)  
appears on the multi-information display.  
Maintenance  
Item Code(s)  
Remaining Days  
Day Icon  
Button:  
Changes the customize  
menus and items.  
SEL/RESET Button:  
Enters the selected item.  
The system message indicator ( ) comes on along with the service reminder  
Information.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
480  
18 FIT JAZZ-32T5A6100.book 481 ページ 2017年8月23日 水曜日 午前11時24分  
uuService Reminder Systemu  
Warning Icons and Service Reminder Information on the  
Multi-Information Display  
Warning Icon (Amber)  
Service Reminder Information  
Explanation  
Information  
SERVICE DUE SOON  
One or more of the service items The remaining days will be  
are required in less than 30 days. counted down per day.  
The remaining days are  
estimated based on your driving  
conditions.  
SERVICE DUE NOW  
One or more of the service items Have the indicated service  
are required in less than 10 days. performed as soon as possible.  
The remaining days are  
estimated based on your driving  
conditions.  
SERVICE OVER DUE  
The indicated maintenance  
Your vehicle has passed the  
service is still not done after the service required point.  
remaining days reach 0.  
Immediately have the service  
performed and make sure to  
reset the service reminder  
system.  
Continued  
481  
18 FIT JAZZ-32T5A6100.book 482 ページ 2017年8月23日 水曜日 午前11時24分  
uuService Reminder Systemu  
Service Reminder Items  
Service items displayed on the multi-information display are in code and icon.  
For an explanation of the service reminder codes and icons, refer to the Service Book  
that came with your vehicle.  
Availability of the Service Reminder System  
Even if the service reminder information appears on the multi-information display  
1Availability of the Service Reminder System  
If you are planning to take your vehicle outside the  
service reminder system applied countries, consult a  
dealer on how to record your service reminder  
information and schedule your maintenance service  
under the conditions of that country.  
while pressing the  
(information) button, this system is not available in some  
countries. Refer to Service Book that came with your vehicle, or ask a dealer if you  
can use the service reminder system.  
482  
18 FIT JAZZ-32T5A6100.book 483 ページ 2017年8月23日 水曜日 午前11時24分  
uuService Reminder Systemu  
1Resetting the Display  
Resetting the Display  
NOTICE  
Reset the service reminder information display if you have performed the  
maintenance service.  
Failure to reset the service reminder information after  
a maintenance service results in the system showing  
incorrect maintenance intervals, which can lead to  
serious mechanical problems.  
The dealer will reset the service reminder information  
display after completing the required maintenance  
service. If someone other than a dealer performs  
maintenance service, reset the service reminder  
information display yourself.  
Button:  
Changes the customize  
menus and items.  
SEL/RESET Button:  
Enters the selected item.  
1. Turn the ignition switch to ON (w*1.  
2. Press the  
then press the SEL/RESET button.  
3. Press the button until Maintenance Info. appears on the display, then  
press the SEL/RESET button.  
button until  
(customize settings) appears on the display,  
4. Press the  
button and select the reset information on the display, then  
press the SEL/RESET button.  
u The service code will disappear.  
To cancel the service reminder information reset mode, select Cancel, then press the  
SEL/RESET button.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
483  
18 FIT JAZZ-32T5A6100.book 484 ページ 2017年8月23日 水曜日 午前11時24分  
Maintenance Schedule*  
If your vehicle comes with the Service Book, the maintenance schedule for your vehicle is available in the book. For vehicles without the  
Service Book, refer to the following maintenance schedule.  
The maintenance schedule outlines the minimum required maintenance that you should perform to ensure the troublefree operation of  
your vehicle. Due to regional and climatic differences, some additional servicing may be required. Please consult your warranty booklet for  
a more detailed description.  
Maintenance work should be performed by properly trained and equipped technicians. Your authorised dealer meets all of these  
requirements.  
Models without Service Book  
km x 1,000  
miles x 1,000  
months  
20  
40  
60  
36  
80  
48  
100 120 140 160 180 200  
Service at the indicated distance or  
time - whichever comes first.  
12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0  
12  
24  
60  
72  
84  
96  
108 120  
Replace engine oil*1  
Normal  
Severe*3  
Normal  
Severe*3  
Every 10,000 km (6,000 miles) or 1 year  
Every 5,000 km (3,000 miles) or 6 months  
Every 20,000 km (12,500 miles) or 2 years  
Every 10,000 km (6,000 miles) or 1 year  
Every 30,000 km (18,500 miles)  
Replace engine oil filter*1  
Replace air cleaner element  
Inspect valve clearance*4  
Replace fuel filter*2  
Replace spark plugs  
Inspect drive belts  
Every 120,000 km (75,000 miles)  
Every 100,000 km (62,500 miles)  
*1:Only severe schedule is required in some countries: refer to the local warranty booklet that came with your vehicle.  
*2:Refer to page 498 for replacement information under severe driving conditions.  
*3:Refer to page 486 for replacement information under severe conditions.  
*4:Sensory Method. Adjust the valves during services 120,000 km if there are noisy.  
* Not available on all models  
484  
18 FIT JAZZ-32T5A6100.book 485 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Schedule*u  
km x 1,000  
miles x 1,000  
months  
20  
40  
60  
80  
100 120 140 160 180 200  
Service at the indicated distance or  
time - whichever comes first.  
12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0  
12  
24  
36  
48  
60  
72  
84  
96  
108 120  
Replace engine coolant  
At 200,000 km (125,000 miles) or 10 years,  
thereafter every 100,000 km (62,500 miles) or 5 years  
Every 120,000 km (75,000 miles) or 6 years  
Replace transmission fluid  
MT Normal  
Severe*1  
CVT  
Inspect front and rear brakes  
Replace brake fluid  
Check parking brake adjustment  
Replace dust and pollen filter  
Check expiry date for TRK bottle*  
Every 10,000 km (6,000 miles) or 6 months  
Every 3 years  
Every year  
Rotate tyres (Check tyre inflation and condition at least once  
per month)  
Every 10,000 km (6,000 miles)  
Visually inspect the following items:  
Tie rod ends, steering gear box, and boots  
Suspension components  
Every 10,000 km (6,000 miles) or 6 months  
Driveshaft boots  
Brake hoses and lines (including ABS)  
All fluid levels and condition of fluid  
Exhaust system  
Fuel lines and connections  
*1:Refer to page 486 for replacement information under severe conditions.  
* Not available on all models  
Continued  
485  
18 FIT JAZZ-32T5A6100.book 486 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Schedule*u  
1Maintenance Schedule*  
If you drive your vehicle under severe conditions, you must have the following items  
served to the maintenance schedule indicated as Severe.  
The condition is considered as severe when you drive:  
A. Less than 8 km (5 miles), or less than 16 km (10  
miles) in freezing temperatures per trip.  
B. In extremely hot temperature above 35°C.  
C. With extensive idling or long periods of stop-and-  
go.  
Items  
Condition  
A, B, C, D and E  
B and D  
Engine oil and filter  
Transmission fluid  
D. Towing trailer, loaded roof rack, or in mountains.  
E. On muddy, dusty or de-iced roads.  
* Not available on all models  
486  
18 FIT JAZZ-32T5A6100.book 487 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Schedule*uMaintenance Record (On vehicles without Service Book)  
Maintenance Record (On vehicles without Service Book)  
Have your servicing dealer record all required maintenance below. Keep receipts for all work done on your vehicle.  
Km (Mi.) or Month  
Date  
Sign or Stamp  
20,000 km  
12,500 Mi. (or 12 Mo.)  
40,000 km  
25,000 Mi. (or 24 Mo.)  
60,000 km  
37,500 Mi. (or 36 Mo.)  
80,000 km  
50,000 Mi. (or 48 Mo.)  
100,000 km  
62,500 Mi. (or 60 Mo.)  
120,000 km  
75,000 Mi. (or 72 Mo.)  
140,000 km  
87,500 Mi. (or 84 Mo.)  
160,000 km  
100,000 Mi. (or 96 Mo.)  
180,000 km  
112,500 Mi. (or 108 Mo.)  
200,000 km  
125,000 Mi. (or 120 Mo.)  
487  
18 FIT JAZZ-32T5A6100.book 488 ページ 2017年8月23日 水曜日 午前11時24分  
Maintenance Under the Bonnet  
Maintenance Items Under the Bonnet  
Left-hand drive type  
Brake/Clutch* Fluid  
(Black Cap)  
Engine Oil Fill Cap  
Engine Oil Dipstick  
(Orange)  
Right-hand drive type  
Brake/Clutch* Fluid  
(Black Cap)  
Battery  
Washer Fluid  
(Blue Cap)  
Engine Coolant Reserve Tank  
Radiator Cap  
* Not available on all models  
488  
18 FIT JAZZ-32T5A6100.book 489 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuOpening the Bonnet  
Opening the Bonnet  
1. Park the vehicle on a level surface, and set  
the parking brake.  
1Opening the Bonnet  
NOTICE  
2. Pull the bonnet release handle under the  
driver’s side lower outside corner of the  
Do not open the bonnet when the wiper arms are  
raised.  
The bonnet will strike the wipers, resulting in damage  
to the bonnet and/or the wipers.  
dashboard.  
u The bonnet will pop up slightly.  
Pull  
When closing the bonnet, check that the bonnet is  
securely latched.  
Bonnet Release Handle  
3. Push the bonnet latch lever (located under  
the front edge of the bonnet to the centre)  
to the side and raise the bonnet. Once you  
have raised the bonnet slightly, you can  
If the bonnet latch lever moves stiffly, or if you can  
open the bonnet without lifting the lever, the latch  
mechanism should be cleaned and lubricated.  
Do not open the bonnet while the Auto Idle Stop  
function is activated.  
release the lever.  
Lever  
4. Remove the support rod from the clamp  
using the grip. Mount the support rod in  
the bonnet.  
Grip  
When closing, remove the support rod, and  
stow it in the clamp, then gently lower the  
bonnet. Remove your hand at a height of  
approximately 30 cm (12 inches) and let the  
bonnet close.  
Support Rod Clamp  
489  
18 FIT JAZZ-32T5A6100.book 490 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuRecommended Engine Oil  
Recommended Engine Oil  
Oil is a major contributor to your engine's performance and longevity. If you drive  
the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.  
1Recommended Engine Oil  
Engine Oil Additives  
Your vehicle does not require oil additives. In fact,  
they may adversely affect the engine performance  
and durability.  
European models  
Honda ENG Oil #1.0  
Honda Green Oil  
ACEA A5/B5  
ACEA viscosity oil is available for European models  
only.  
Use a Genuine Honda Motor oil or another  
commercial engine oil of suitable viscosity for  
the ambient temperature as shown.  
HONDA ENG OIL #1.0, Honda Green oil.  
0W-20  
Honda ENG Oil #1.0 oil is formulated to  
improve fuel economy.  
Ambient Temperature  
If Honda ENG Oil #1.0, Honda Green Oil, or  
0W-20 is not available, use 5W-30 or 0W-30.  
490  
18 FIT JAZZ-32T5A6100.book 491 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuRecommended Engine Oil  
Except European models  
Genuine Honda Motor Oil  
API service SM or higher grade fuel-efficient oil  
Use a Genuine Honda Motor oil or another  
commercial engine oil of suitable viscosity for  
the ambient temperature as shown.  
0W-20, 0W-30, 5W-30  
10W-30  
0W-20 oil is formulated to improve fuel  
economy.  
Ambient Temperature  
491  
18 FIT JAZZ-32T5A6100.book 492 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuOil Check  
Oil Check  
We recommend that you check the engine oil level every time you refuel.  
Park the vehicle on level ground.  
Wait approximately three minutes after turning the engine off before you check the oil.  
1. Remove the dipstick (orange).  
1Oil Check  
If the oil level is near or below the lower mark, slowly  
add oil, being careful not to overfill.  
The amount of oil consumed depends on how the  
vehicle is driven and the climatic and road conditions  
encountered. The rate of oil consumption can be up  
to 1 litre per 1,000 km/625 miles.  
Consumption is likely to be higher when the engine is  
new.  
2. Wipe the dipstick with a clean cloth or  
paper towel.  
3. Insert the dipstick back all the way into its  
hole.  
4. Remove the dipstick again, and check the  
level. It should be between the upper and  
lower marks. Add oil if necessary.  
Upper Mark  
Lower Mark  
492  
18 FIT JAZZ-32T5A6100.book 493 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuAdding Engine Oil  
Adding Engine Oil  
1. Unscrew and remove the engine oil fill cap. 1Adding Engine Oil  
2. Add oil slowly.  
NOTICE  
3. Reinstall the engine oil fill cap, and tighten  
it securely.  
4. Wait for three minutes and recheck the  
engine oil dipstick.  
Do not fill the engine oil above the upper mark.  
Overfilling the engine oil can result in leaks and  
engine damage.  
If any oil spills, wipe it up immediately. Spilled oil may  
damage the engine compartment components.  
Engine Oil Fill Cap  
493  
18 FIT JAZZ-32T5A6100.book 494 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuEngine Coolant  
Engine Coolant  
1Engine Coolant  
Specified coolant: Honda All Season Antifreeze/Coolant Type 2  
3
WARNING  
This coolant is premixed with 50% antifreeze and 50% water. Do not add any  
straight antifreeze or water.  
Removing the radiator cap while the  
engine is hot can cause the coolant to spray  
out, seriously scalding you.  
We recommend you check the engine coolant level every time you refuel. Check the  
reserve tank first. If it is completely empty, also check the coolant level in the  
radiator. Add the engine coolant accordingly.  
Always let the engine and radiator cool  
down before removing the radiator cap.  
Reserve Tank  
If temperatures consistently below -30°C are  
expected, the coolant mixture should be changed to  
a higher concentration. Consult your Honda dealer  
for details about a suitable coolant mixture.  
1. Make sure the engine and radiator are cool.  
2. Check the amount of coolant in the reserve  
tank.  
u If the coolant level is below the MIN  
mark, add the specified coolant until it  
reaches the MAX mark.  
MAX  
MIN  
If Honda antifreeze/coolant is not available, you may  
use another major brand non-silicate coolant as a  
temporary replacement. Check that it is a high quality  
coolant recommended for aluminium engines.  
Continued use of any non-Honda coolant can result  
in corrosion, causing the cooling system to  
malfunction or fail. Have the cooling system flushed  
and refilled with Honda antifreeze/coolant as soon as  
possible.  
Reserve Tank  
3. Inspect the cooling system for leaks.  
Do not add rust inhibitors or other additives to your  
vehicle’s cooling system. They may not be compatible  
with the coolant or with the engine components.  
494  
18 FIT JAZZ-32T5A6100.book 495 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuEngine Coolant  
1Radiator  
Radiator  
NOTICE  
1. Make sure the engine and radiator are  
cool.  
Pour the fluid slowly and carefully so you do not spill  
any. Clean up any spills immediately; they can  
damage components in the engine compartment.  
Radiator Cap  
2. Turn the radiator cap 1/8 turn anticlockwise  
and allow any pressure in the cooling  
system to release. Do not push the cap  
down when turning.  
3. Push down and turn the radiator cap  
anticlockwise to remove it.  
4. The coolant level should be up to the base  
of the filler neck. Add coolant if it is low.  
5. Put the radiator cap back on, and tighten it  
fully.  
495  
18 FIT JAZZ-32T5A6100.book 496 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuTransmission Fluid  
Transmission Fluid  
Continuously variable transmission models  
1Continuously Variable Transmission (CVT) Fluid  
Continuously Variable Transmission (CVT) Fluid  
NOTICE  
Specified fluid: Honda HCF-2 Transmission Fluid  
Do not mix Honda HCF-2 transmission fluid with  
other transmission fluids.  
Have a dealer check the fluid level and replace if necessary.  
Follow your vehicle’s maintenance service timing of when to change continuously  
variable transmission (CVT) fluid.  
Using a transmission fluid other than Honda HCF-2  
transmission fluid may adversely affect the operation  
and durability of your vehicle’s transmission, and  
damage the transmission.  
2 Service Reminder System P. 479  
Any damage caused by using a transmission fluid that  
is not equivalent to Honda HCF-2 transmission fluid is  
not covered by Honda’s new vehicle limited warranty.  
*
2 Maintenance Schedule P. 484  
Do not attempt to check or change the continuously variable transmission (CVT)  
fluid yourself.  
Manual transmission models  
1Manual Transmission Fluid  
Manual Transmission Fluid  
If Honda MTF is not available, you may use the API  
certificated SAE 0W-20 or 5W-20 viscosity motor oil  
as a temporary measure.  
Replace with MTF as soon as possible. Motor oil does  
not contain the proper additives for the transmission  
and continued use can cause decreased shifting  
performance and lead to transmission damage.  
Specified fluid: Honda Manual Transmission Fluid (MTF)  
Have a dealer check the fluid level and replace if necessary.  
Follow your vehicle’s maintenance service timing of when to change manual  
transmission fluid.  
2 Service Reminder System P. 479  
*
2 Maintenance Schedule P. 484  
Do not attempt to check or change the manual transmission fluid yourself.  
* Not available on all models  
496  
18 FIT JAZZ-32T5A6100.book 497 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuMaintenance Under the BonnetuBrake/Clutch Fluid  
Brake/Clutch* Fluid  
*
1Brake/Clutch Fluid  
Specified fluid: Brake Fluid with DOT 3 or DOT 4  
Use the same fluid for both the brakes and clutch.  
NOTICE  
Brake fluid marked DOT 5 is not compatible with your  
vehicle's braking system and can cause extensive  
damage.  
Checking the Brake Fluid  
We recommend using a genuine product.  
The fluid level should be between the MIN  
and MAX marks on the side of the reserve  
tank.  
Reserve Tank  
If the brake fluid level is at or below the MIN mark,  
have a dealer inspect the vehicle for leaks or worn  
brake pads as soon as possible.  
Manual transmission models  
MAX  
The brake fluid reserve tank is also used for  
your vehicle’s clutch fluid. As long as you keep  
the brake fluid level as instructed above, there  
is no need for checking the clutch fluid level.  
MIN  
* Not available on all models  
497  
18 FIT JAZZ-32T5A6100.book 498 ページ 2017年8月23日 水曜日 午前11時24分  
uuMaintenance Under the BonnetuRefilling Window Washer Fluid  
Refilling Window Washer Fluid  
Check the amount of window washer fluid by looking at the reservoir.  
1Refilling Window Washer Fluid  
If the level is low, fill the washer reservoir.  
NOTICE  
Window Washer  
Reservoir  
Do not use engine antifreeze or a vinegar/water  
solution in the windscreen washer reservoir.  
Antifreeze can damage your vehicle's paint. A  
vinegar/water solution can damage the windscreen  
washer pump.  
Pour the washer fluid carefully. Do not  
overflow the reservoir.  
Use only commercially available windscreen washer  
fluid.  
Avoid prolonged use of hard water to prevent lime  
scale build up.  
Fuel Filter  
Replace fuel filter according to the time and distance recommendations in the  
maintenance schedule.  
Models without Service Book  
It is recommended to replace the fuel filter every 40,000 km (25,000 miles), or two  
years, if you suspect the fuel you are using is contaminated. In a dusty environment,  
the filter may become clogged sooner.  
All models  
Have a qualified technician change the fuel filter. Fuel in the system can spray out  
and create a hazard if all fuel line connections are not handled correctly.  
498  
18 FIT JAZZ-32T5A6100.book 499 ページ 2017年8月23日 水曜日 午前11時24分  
Replacing Light Bulbs  
Headlight Bulbs  
When replacing, use the following bulbs.  
1Headlight Bulbs  
Models with halogen high beam and low beam headlights  
NOTICE  
Halogen bulbs get very hot when lit.  
Oil, perspiration, or a scratch on the glass can cause  
the bulb to overheat and shatter.  
High/Low beam headlight: 60/55 W (H4LL/HB2LL*, H4 LL, H4 for halogen  
bulb type)  
Models with LED high beam and low beam headlights  
The headlight aim is set by the factory, and does not  
need to be adjusted. However, if you regularly carry  
heavy items in the luggage area or tow a trailer, have  
the aiming readjusted at a dealer or by a qualified  
technician.  
High beam headlight: LED type  
Low beam headlight: LED type  
High/Low Beam Headlight*  
1. Remove the coupler.  
Coupler  
When replacing a halogen bulb, handle it by its base,  
and protect the glass from contact with your skin or  
hard objects. If you touch the glass, clean it with  
denatured alcohol and a clean cloth.  
2. Remove the rubber weather seal.  
Models with LED high beam and low beam headlights  
High beam and low beam headlights are LED type.  
Have an authorized Honda dealer inspect and replace  
the light assembly.  
Rubber Weather Seal  
3. Remove the hold-down wire, then remove  
Hold-Down Wire  
the bulb.  
4. Insert a new bulb.  
* Not available on all models  
Continued  
499  
18 FIT JAZZ-32T5A6100.book 500 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuHeadlight Bulbs  
5. Reinstall the hold-down wire. Hook the end  
of the wire on the knob in the slot.  
u You can see if the hold-down wire is in  
the right place from the inspection  
window.  
Hold-Down  
Wire  
6. Reinstall the rubber weather seal.  
7. Insert the coupler into the connector of the  
bulb.  
Inspection Window  
500  
18 FIT JAZZ-32T5A6100.book 501 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuReplacing Light BulbsuFront Fog Light Bulbs  
Front Fog Light Bulbs*  
*
When replacing, use the following bulbs.  
1Front Fog Light Bulbs  
Front Fog Light: 35 W (H8 for halogen bulb type)  
NOTICE  
Halogen bulbs get very hot when lit. Oil, perspiration,  
or a scratch on the glass can cause the bulb to  
overheat and shatter.  
1. Remove the screws using a Phillips-head  
screwdriver and remove the holding clips  
using a flat-tip screwdriver.  
Clip  
When replacing a halogen bulb, handle it by its  
plastic case, and protect the glass from contact with  
your skin or hard objects. If you touch the glass, clean  
it with denatured alcohol and a clean cloth.  
2. Pull the under part of the inner fender cover  
down.  
Cover  
Screw  
Holding clip  
Insert a flat-tip screwdriver, lift and remove the  
central pin to remove the clip.  
Central Pin  
* Not available on all models  
Continued  
501  
18 FIT JAZZ-32T5A6100.book 502 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuReplacing Light BulbsuFront Fog Light Bulbs  
*
3. Push the tab to remove the coupler.  
1Front Fog Light Bulbs  
Bulbs  
4. Rotate the old bulb to the left to remove.  
5. Insert a new bulb into the fog light  
Insert the clip with the central pin raised, and push  
until it is flat.  
Coupler  
assembly and turn it to the right.  
6. Insert the coupler into the connector of the  
bulb.  
Push until the  
pin is flat.  
Tab  
* Not available on all models  
502  
18 FIT JAZZ-32T5A6100.book 503 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuFront Turn Signal Light Bulbs  
Front Turn Signal Light Bulbs  
When replacing, use the following bulbs.  
Front Turn Signal Light: 21 W (Amber)  
1. Turn the socket to the left and remove it.  
Bulb  
2. Pull the bulb straight out of its holder.  
3. Insert a new bulb.  
Socket  
503  
18 FIT JAZZ-32T5A6100.book 504 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuPosition Light Bulbs  
Models with bulb type position lights  
Position Light Bulbs  
When replacing, use the following bulbs.  
Position Light: 5 W  
1. Turn the socket to the left and remove it,  
Bulb  
then remove the old bulb.  
2. Insert a new bulb.  
Socket  
Models with LED type position lights  
Position Lights  
Position lights are LED type. Have an authorised Honda dealer inspect and replace  
the light assembly.  
504  
18 FIT JAZZ-32T5A6100.book 505 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuSide Turn Signal/Emergency Indicator Lights  
Side Turn Signal/Emergency Indicator Lights  
Door mirrors have side turn signal lights. Have an authorized Honda dealer inspect  
and replace the light bulbs.  
Daytime Running Lights  
Daytime running lights are the LED type. Have an authorized Honda dealer inspect  
and replace the light assembly.  
505  
18 FIT JAZZ-32T5A6100.book 506 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuBack-Up Light, Rear Turn Signal Light and Rear Fog Light Bulbs  
Back-Up Light, Rear Turn Signal Light and Rear Fog  
Light Bulbs  
When replacing, use the following bulbs.  
Back-Up Light: 16 W  
Rear Turn Signal Light: 21 W (Amber)  
Rear Fog Light: 21 W  
1. Use a Phillips-head screwdriver to remove  
the bolts.  
2. Pull the light assembly out of the rear pillar.  
Bolt  
3. Turn the socket to the left and remove it.  
Remove the old bulb.  
4. Insert a new bulb.  
5. Slide the light assembly onto the guide on  
the body.  
Bulb  
Socket  
506  
18 FIT JAZZ-32T5A6100.book 507 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuBrake/Taillights  
Brake/Taillights  
Brake/taillights are the LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
507  
18 FIT JAZZ-32T5A6100.book 508 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuRear Licence Plate Light Bulbs  
Rear Licence Plate Light Bulbs  
When replacing, use the following bulbs.  
Rear Licence Plate Light: 5 W  
1. Push the lens on the left and pull out the  
lens and the socket attached to it.  
Lens  
2. Remove the licence plate light assembly by  
squeezing the tabs on both sides of the  
socket.  
3. Remove the old bulb and insert a new bulb.  
Bulb  
High-Mount Brake Light  
High-mount brake light is LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
508  
18 FIT JAZZ-32T5A6100.book 509 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuOther Light Bulbs  
Other Light Bulbs  
Models with colour audio system  
Ceiling Light Bulb  
Map Light Bulbs  
Models with display audio system  
When replacing, use the following bulb.  
When replacing, use the following bulbs.  
Ceiling Light: 8 W  
Map Light: 8 W  
1. Pry on the edge of the cover using a flat-  
tip screwdriver to remove the cover.  
u Wrap the flat-tip screwdriver with a  
cloth to prevent scratches.  
1. Pry on the edge of the cover using a flat-  
tip screwdriver to remove the cover.  
u Wrap the flat-tip screwdriver with a  
cloth to prevent scratches.  
1. Pry on the edge of the cover using a flat-  
tip screwdriver to remove the cover.  
u Wrap the flat-tip screwdriver with a  
cloth to prevent scratches.  
Bulb  
Bulb  
Bulb  
Bulb  
2. Remove the old bulb and insert a new  
bulb.  
2. Remove the old bulb and insert a new  
bulb.  
2. Remove the old bulb and insert a new  
bulb.  
Continued  
509  
18 FIT JAZZ-32T5A6100.book 510 ページ 2017年8月23日 水曜日 午前11時24分  
uuReplacing Light BulbsuOther Light Bulbs  
Luggage Area Light Bulb  
When replacing, use the following bulbs.  
Luggage Area Light: 5 W  
Bulb  
2. Remove the old bulb and insert a new  
bulb.  
1. Pry on the edge of the cover using a flat-  
tip screwdriver to remove the cover.  
u Wrap the flat-tip screwdriver with a  
cloth to prevent scratches.  
510  
18 FIT JAZZ-32T5A6100.book 511 ページ 2017年8月23日 水曜日 午前11時24分  
Checking and Maintaining Wiper Blades  
Checking Wiper Blades  
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces  
of the blade may scratch the window glass.  
Changing the Front Wiper Blade Rubber  
1Changing the Front Wiper Blade Rubber  
1. Lift the driver side wiper arm first, then the  
NOTICE  
Avoid dropping the wiper arm onto the windscreen,  
it may damage the wiper arm and/or the windscreen.  
passenger side.  
2. Press and hold the tab, then slide the holder  
off the wiper arm.  
Lock Tab  
Continued  
511  
18 FIT JAZZ-32T5A6100.book 512 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber  
3. Slide the wiper blade out of the holder by  
pulling the tabbed end out.  
Blade  
4. Slide the new wiper blade onto the holder  
from the bottom end.  
u The tab on the blade should fit in the  
indent of the top of the wiper holder.  
5. Slide the holder onto the wiper arm  
Blade  
Tab  
securely.  
6. Lower the passenger side wiper arm first,  
then the driver side.  
512  
18 FIT JAZZ-32T5A6100.book 513 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
Changing the Rear Wiper Blade Rubber  
1. Raise the wiper arm off.  
1Changing the Rear Wiper Blade Rubber  
2. Pivot the bottom end of the wiper blade up  
NOTICE  
until it comes off from the wiper arm.  
Avoid dropping the wiper arm; it may damage the  
rear window.  
Wiper Arm  
3. Slide the wiper blade out from the end with  
the indent.  
Blade  
Continued  
513  
18 FIT JAZZ-32T5A6100.book 514 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
4. Remove the retainers from the wiper blade  
that has been removed, and mount to a  
new rubber blade.  
Retainer  
5. Slide the wiper blade onto the holder.  
u Make sure it is engaged correctly, then  
install the wiper blade assembly onto the  
wiper arm.  
Holder  
514  
18 FIT JAZZ-32T5A6100.book 515 ページ 2017年8月23日 水曜日 午前11時24分  
Checking and Maintaining Tyres  
Checking Tyres  
To safely operate your vehicle, your tyres must be of the proper type and size, in  
good condition with adequate tread, and properly inflated.  
1Checking Tyres  
3
WARNING  
Inflation guidelines  
Properly inflated tyres provide the best combination of handling, tread life, and  
comfort. Refer to the driver’s doorjamb label for the specified pressure.  
Using tyres that are excessively worn or  
improperly inflated can cause a crash in  
which you can be seriously hurt or killed.  
Follow all instructions in this owner’s  
manual regarding tyre inflation and  
maintenance.  
Underinflated tyres wear unevenly, adversely affect handling and fuel economy, and  
are more likely to fail from overheating.  
Overinflated tyres make your vehicle ride harshly, are more prone to road hazards,  
and wear unevenly.  
Measure the air pressure when tyres are cold. This  
means the vehicle has been parked for at least three  
hours, or driven less than 1.6 km (1 mile). If  
necessary, add or release air until the specified  
pressure is reached.  
Every day before you drive, look at each of the tyres. If one looks lower than the  
others, check the pressure with a tyre gauge.  
At least once a month or before long trips, use a gauge to measure the pressure in  
all tyres, including the spare*. Even tyres in good condition can lose 10-20 kPa  
(0.1-0.2 kgf/cm2, 1-2 psi) per month.  
If checked when hot, tyre pressure can be as much as  
30–40 kPa (0.3–0.4 kgf/cm2, 4–6 psi) higher than if  
checked when cold.  
Have a dealer check the tyres if you feel a consistent  
vibration while driving. New tyres and any that have  
been removed and reinstalled should be properly  
balanced.  
Whenever tyre pressure is adjusted, you must  
calibrate the Deflation Warning System.  
2 Deflation Warning System Calibration  
P. 449  
* Not available on all models  
Continued  
515  
18 FIT JAZZ-32T5A6100.book 516 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuChecking Tyres  
Inspection guidelines  
Every time you check inflation, also examine the tyres and valve stems.  
Look for:  
1Checking Tyres  
High speed driving  
Models with 185/55 R16 tyres  
Bumps or bulges on the side or in the tread. Replace the tyre if you find any cuts,  
splits, or cracks in the side of the tyre. Replace it if you see fabric or cord.  
Remove any foreign objects and inspect for air leaks.  
Uneven tread wear. Have a dealer check the wheel alignment.  
Excessive tread wear.  
We recommend that you do not drive faster than the  
posted speed limits and conditions allow. If you drive  
at sustained high speeds (over 160 km/h/100 mph),  
adjust the cold tyre pressures as shown below to  
avoid excessive heat build up and sudden tyre failure.  
2 Wear Indicators P. 517  
Tyre Size  
Pressure  
185/55R16 83H  
Front: 240 kPa (2.4 kgf/cm2, 35 psi)  
Rear: 230 kPa (2.3 kgf/cm2, 33 psi)  
Cracks or other damage around valve stem.  
516  
18 FIT JAZZ-32T5A6100.book 517 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuWear Indicators  
Wear Indicators  
The groove where the wear indicator is  
Example of a Wear  
Indicator mark  
located is 1.6 mm (1/16 inch) shallower than  
elsewhere on the tyre. If the tread has worn so  
that the indicator is exposed, replace the tyre.  
Worn out tyres have poor traction on wet  
roads.  
Tyre Service Life  
The life of your tyres is dependent on many factors, including driving habits, road  
conditions, vehicle loading, inflation pressure, maintenance history, speed, and  
environmental conditions (even when the tyres are not in use).  
In addition to regular inspections and inflation pressure maintenance, it is  
recommended that you have annual inspections performed once the tyres reach five  
years old. All tyres, including the spare*, should be removed from service after 10  
years from the date of manufacture, regardless of their condition or state of wear.  
* Not available on all models  
517  
18 FIT JAZZ-32T5A6100.book 518 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuTyre and Wheel Replacement  
Tyre and Wheel Replacement  
1Tyre and Wheel Replacement  
Replace your tyres with radials of the same size, load range, speed rating, and  
maximum cold tyre pressure rating (as shown on the tyre’s sidewall). Using tyres of  
a different size or construction can cause certain vehicle systems such as the ABS  
and Vehicle Stability Assist (VSA)* system to work incorrectly.  
3
WARNING  
Installing improper tyres on your vehicle  
can affect handling and stability. This can  
cause a crash in which you can be seriously  
hurt or killed.  
It is best to replace all four tyres at the same time. If that isn’t possible, replace the  
front or rear tyres in pairs.  
Always use the size and type of tyres  
recommended in the tyre information label  
on your vehicle.  
Make sure that the wheel’s specifications match those of the original wheels.  
* Not available on all models  
518  
18 FIT JAZZ-32T5A6100.book 519 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuTyre Rotation  
Tyre Rotation  
Rotating tyres according to the maintenance schedule helps to distribute wear more  
evenly and increase tyre life.  
1Tyre Rotation  
Tyres with directional tread patterns should only be  
rotated front to back (not from one side to the other).  
Directional tyres should be mounted with the  
rotation indication mark facing forward, as shown  
below.  
Tyres without rotation mark  
Rotate the tyres as shown here.  
Front  
Front  
Rotation Mark  
Tyres with rotation mark  
Rotate the tyres as shown here.  
When the tyres are rotated, make sure the air  
pressures are checked.  
Whenever tyre pressure is adjusted, you must  
calibrate the Deflation Warning System.  
2 Deflation Warning System Calibration  
P. 449  
Front  
519  
18 FIT JAZZ-32T5A6100.book 520 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuSnow Traction Devices  
Snow Traction Devices  
If driving on snowy or frozen roads, mount winter tyres, or tyre chains; reduce  
speed; and maintain sufficient distance between vehicles when driving.  
1Snow Traction Devices  
3
WARNING  
Be particularly careful when operating the steering wheel or brakes to prevent skidding.  
Using the wrong chains, or not properly  
installing chains, can damage the brake  
lines and cause a crash in which you can be  
seriously injured or killed.  
Use tyre chains, winter tyres, or all season tyres when necessary or according to the  
law.  
Follow all instructions in this owner’s manual  
regarding the selection and use of tyre chains.  
When mounting, refer to the following points.  
NOTICE  
For winter tyres:  
Traction devices that are the wrong size or improperly  
installed can damage your vehicle's brake lines,  
suspension, body, and wheels. Stop driving if they are  
hitting any part of the vehicle.  
Select the size and load ranges that are the same as the original tyres.  
Mount the tyres to all four wheels.  
According to the EEC Directive for tyres, when winter  
tyres are used, it is necessary to affix a sticker with the  
allowable max. speed of the winter tyres clearly in the  
field of view of the driver, if the designed max. speed  
of vehicle is higher than the allowed max. speed of  
winter tyre. A sticker is obtainable from your tyre  
dealer. If you have any question, consult a dealer.  
When tyre chains are mounted, follow the chain  
manufacturer's instructions regarding vehicle  
operational limits.  
Use tyre chains only in an emergency or when they  
are legally required for driving through a certain area.  
Use greater caution when driving with tyre chains on  
snow or ice. They may have less-predictable handling  
than good winter tyres without chains.  
If your vehicle is equipped with summer tyres, be aware  
that these tyres are not designed for winter driving  
conditions. For more information, contact a dealer.  
520  
18 FIT JAZZ-32T5A6100.book 521 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining TyresuSnow Traction Devices  
For tyre chains:  
Consult a dealer before purchasing any type of chains for your vehicle.  
Install them on the front tyres only.  
Because your vehicle has limited tyre clearance, we strongly recommend using the  
chains listed below:  
Original Tyre Size*1  
185/60R15 84H  
185/55R16 83H  
Chain Type  
RUD-matic classic 48478  
RUD-matic classic 48479  
*1: Original tyre size is mentioned on the tyre information label on the driver’s doorjamb.  
Follow the chain manufacturer's instruction when installing. Mount them as  
tightly as you can.  
Check that the chains do not touch the brake lines or suspension.  
Drive slowly.  
521  
18 FIT JAZZ-32T5A6100.book 522 ページ 2017年8月23日 水曜日 午前11時24分  
Battery  
Checking the Battery  
On the battery with test indicator  
1Battery  
Check the battery condition monthly. Look at  
the test indicator window and check the  
terminals for corrosion.  
The battery condition is monitored by the  
sensor on the negative terminal. If there is a  
problem with the sensor, the warning  
3
WARNING  
The battery gives off explosive hydrogen  
gas during normal operation.  
A spark or open flame can cause the  
battery to explode with enough force to  
kill or seriously hurt you.  
message on multi-information display will let  
Test Indicator Window*  
you know. Have your vehicle checked by a  
dealer.  
Keep all sparks, open flames, and smoking  
materials away from the battery.  
On the battery without the test indicator  
Wear protective clothing and a face shield,  
or have a skilled technician do any battery  
maintenance.  
The condition of the battery is monitored by a sensor located on the negative  
terminal of the battery. If there is a problem with the sensor, the warning message  
on multi-information display will let you know. Have your vehicle checked by a  
dealer.  
3
WARNING  
Check the battery terminals for corrosion monthly.  
The battery contains sulfuric acid  
(electrolyte) which is highly corrosive and  
poisonous.  
All models  
If your vehicle’s battery is disconnected or goes dead:  
The clock resets.  
Getting electrolyte in your eyes or on your  
skin can cause serious burns. Wear  
protective clothing and eye protection  
when working on or near the battery.  
2 Clock P. 140  
The audio system is disabled.  
2 Reactivating the audio system P. 223  
The navigation system is disabled. A PIN code will be required.  
2 Refer to the navigation system manual  
Swallowing electrolyte can cause fatal  
poisoning if immediate action is not taken.  
KEEP OUT OF THE REACH OF CHILDREN  
* Not available on all models  
522  
18 FIT JAZZ-32T5A6100.book 523 ページ 2017年8月23日 水曜日 午前11時24分  
uuBatteryuCharging the Battery  
Charging the Battery  
Disconnect both battery cables to prevent damaging your vehicle’s electrical system.  
Always disconnect the negative (-) cable first, and reconnect it last.  
1Battery  
Models with test indicator window on the battery  
The test indicator’s colour information is on the  
battery.  
The location of the test indicator window may vary  
depending on the model.  
Emergency Procedures  
Eyes: Flush with water from a cup or other container  
for at least 15 minutes. (Water under pressure can  
damage the eye.) Call a physician immediately.  
Skin: Remove contaminated clothing. Flush the skin  
with large quantities of water. Call a physician  
immediately.  
Swallowing: Drink water or milk. Call a physician  
immediately.  
When you find corrosion, clean the battery terminals  
by applying a baking powder and water solution.  
Clean the terminals with a damp towel. Cloth/towel  
dry the battery. Coat the terminals with grease to  
help prevent future corrosion.  
When replacing the battery, the replacement must be  
of the same specifications. Consult a dealer for more  
information.  
The battery installed in this vehicle is specifically  
designed for a model with Auto Idle Stop. Using a  
battery other than this specified type may shorten the  
battery life, and prevent Auto Idle Stop from  
activating. If you need to replace the battery, make  
sure to select the specified type. Ask a dealer for  
more details.  
523  
18 FIT JAZZ-32T5A6100.book 524 ページ 2017年8月23日 水曜日 午前11時24分  
uuBatteryuReplacing Battery  
Replacing Battery  
When you remove and replace the battery, always follow the maintenance safety  
and the warnings for when checking the battery to prevent potential hazards.  
2 Maintenance Safety P. 477  
1Replacing Battery  
NOTICE  
An improperly disposed of battery can be harmful to  
the environment and human health. Always confirm  
local regulations for battery disposal.  
2 Checking the Battery P. 522  
1. Turn the ignition switch to LOCK (0*1.  
Nuts  
Cover  
Open the bonnet.  
This symbol on the battery means that this product  
must not be treated as household waste.  
2. Loosen the nut on the negative battery  
cable, then disconnect the cable from the  
negative (–) terminal.  
3. Open the positive battery terminal cover.  
Loosen the nut on the positive battery  
cable, then disconnect the cable from the  
positive (+) terminal.  
Nut  
4. Loosen the nut on each side of the battery  
bracket with a wrench.  
Nuts  
5. Pull the bottom end of each battery stay out  
of the hole on the battery base, and remove  
the combination of the battery bracket and  
the stays.  
Stays  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
524  
18 FIT JAZZ-32T5A6100.book 525 ページ 2017年8月23日 水曜日 午前11時24分  
uuBatteryuReplacing Battery  
1Replacing Battery  
6. Remove the battery cover.  
Always disconnect the negative (-) cable first, and  
reconnect it last.  
To install a new battery, reverse this procedure.  
Battery Cover  
7. Take out the battery carefully.  
525  
18 FIT JAZZ-32T5A6100.book 526 ページ 2017年8月23日 水曜日 午前11時24分  
uuBatteryuBattery Label  
Battery Label  
1Battery Label  
DANGER  
Keep flames and sparks away from the battery. The  
battery produces explosive gas that can cause an  
explosion.  
Wear eye protection and rubber gloves when  
handling the battery to avoid risk of burns or loss of  
eyesight if exposed to battery electrolyte.  
Do not allow children to handle the battery, under  
any circumstance. Ensure that anyone handling the  
battery has a proper understanding of the hazards  
and correct handling procedures involved.  
Handle battery electrolyte with extreme care, as it  
contains dilute sulfuric acid. Exposure to eyes or  
skin can cause burns or loss of eyesight.  
Read this manual carefully, and understand it  
before handling the battery. Failure to do so can  
cause personal injury and damage to the vehicle.  
Do not use the battery if the level of electrolyte is at  
or below the recommended level. Using the battery  
with low electrolyte can cause it to explode,  
causing serious injury.  
Example  
526  
18 FIT JAZZ-32T5A6100.book 527 ページ 2017年8月23日 水曜日 午前11時24分  
Remote Transmitter Care  
Replacing the Button Battery  
1Replacing the Button Battery  
If the indicator does not come on when the button is pressed, replace the battery.  
Retractable Key*  
Battery type: CR2032  
1. Remove the upper half of the cover by  
carefully prying on the edge with a coin.  
u Wrap a coin with a cloth to prevent  
scratching the retractable key.  
2. Remove the button battery with the small  
flat-tip screwdriver.  
Battery  
A warning mark is located adjacent to the button  
battery*.  
3. Make sure to replace the battery with the  
correct polarity.  
NOTICE  
An improperly disposed of battery can damage the  
environment. Always confirm local regulations for  
battery disposal.  
Replacement batteries are commercially available or  
at a dealer.  
This symbol on the battery means that this product  
must not be treated as household waste.  
* Not available on all models  
Continued  
527  
18 FIT JAZZ-32T5A6100.book 528 ページ 2017年8月23日 水曜日 午前11時24分  
uuRemote Transmitter CareuReplacing the Button Battery  
Keyless Remote*  
Battery type: CR2032  
1. Remove the built-in key.  
2. Remove the upper half by carefully prying  
on the edge with a coin.  
u Wrap a coin with a cloth to prevent  
scratching the keyless remote.  
3. Make sure to replace the battery with the  
correct polarity.  
Battery  
* Not available on all models  
528  
18 FIT JAZZ-32T5A6100.book 529 ページ 2017年8月23日 水曜日 午前11時24分  
*
*
Heating and Cooling System /Climate Control System Maintenance  
Air Conditioning  
For proper and safe operation of the heating and cooling system /climate control  
system, the refrigerant system should only be served by a qualified technician.  
1Air Conditioning  
NOTICE  
Vented refrigerant is harmful to the environment.  
To avoid refrigerant from venting, never replace the  
evaporator with one removed from a used or  
salvaged vehicle.  
Never repair or replace the air conditioning evaporator (cooling coil) with one  
removed from a used or salvaged vehicle.  
Refrigerant in your vehicle’s air conditioning system is  
flammable and can be ignited during servicing if  
proper procedures are not followed.  
The air conditioner label is found under the bonnet:  
: Caution  
: Flammable Refrigerant  
: Requires a qualified  
technician to service  
: Air Conditioning  
System  
* Not available on all models  
529  
18 FIT JAZZ-32T5A6100.book 530 ページ 2017年8月23日 水曜日 午前11時24分  
uuHeating and Cooling System*/Climate Control System* MaintenanceuDust and Pollen Filter  
Dust and Pollen Filter  
1Dust and Pollen Filter  
When to Replace the Dust and Pollen Filter  
If the airflow from the heating and cooling system*/  
climate control system* deteriorates noticeably, and  
the windows fog up easily, the filter may need to be  
replaced.  
Replace the dust and pollen filter according to your vehicle’s recommended  
maintenance schedule. It is recommended to replace the filter even sooner if the  
vehicle has been driven in a dusty environment.  
*
2 Maintenance Schedule P. 484  
The dust and pollen filter collects pollen, dust, and  
other debris in the air.  
2 Service Reminder System P. 479  
How to Replace the Dust and Pollen Filter  
1. Open the glove box.  
Handle  
Pull  
* Not available on all models  
530  
18 FIT JAZZ-32T5A6100.book 531 ページ 2017年8月23日 水曜日 午前11時24分  
uuHeating and Cooling System*/Climate Control System* MaintenanceuDust and Pollen Filter  
2. Disengage the two tabs by pushing on each  
side panel.  
3. Pivot the glove box out of the way.  
1Dust and Pollen Filter  
Tabs  
If you are not sure how to replace the dust and pollen  
filter, have it replaced by a dealer.  
4. Push in the tabs on the corners of the filter  
case cover, and remove it.  
Cover  
Push  
Tabs  
Push  
5. Remove the filter from the case.  
6. Install a new filter in the case.  
u Put the AIR FLOW arrow directed side  
down.  
Dust and Pollen  
Filter  
531  
18 FIT JAZZ-32T5A6100.book 532 ページ 2017年8月23日 水曜日 午前11時24分  
Cleaning  
Interior Care  
Use a vacuum cleaner to remove dust before using a cloth.  
Use a damp cloth with a mixture of mild detergent and warm water to remove dirt.  
Use a clean cloth to remove detergent residue.  
1Interior Care  
Do not spill liquids inside the vehicle.  
Electrical devices and systems may malfunction if  
liquids are splashed on them.  
Cleaning Seat Belts  
Do not use silicone based sprays on electrical devices  
such as audio devices and switches.  
Doing so may cause the items to malfunction or  
cause a fire inside the vehicle.  
Use a soft brush with a mixture of mild soap and warm water to clean the seat belts.  
Let the belts air dry. Wipe the loops of the seat belt anchors using a clean cloth.  
If a silicone based spray is inadvertently used on  
electrical devices, consult a dealer.  
Loop  
Depending on their composition, chemicals and  
liquid aromatics may cause discolouration, wrinkles,  
and cracking to resin-based parts and textiles.  
Do not use alkali solvents or organic solvents such as  
benzene or petrol.  
After using chemicals, make sure to gently wipe them  
away using a dry cloth.  
Do not place used cloths on top of resin based parts  
or textiles for long periods of time without washing.  
Be careful not to spill a liquid type air freshener.  
1Cleaning the Window  
Cleaning the Window  
Wires are mounted to the inside of the rear window.  
Wipe along the same direction as the wires with a  
soft cloth so as not to damage them.  
Wipe using a glass cleaner.  
532  
18 FIT JAZZ-32T5A6100.book 533 ページ 2017年8月23日 水曜日 午前11時24分  
uuCleaninguInterior Care  
*
1Floor Mats  
Floor Mats*  
If you use any floor mats that were not originally  
provided with your vehicle, make sure they are  
designed for your specific vehicle, fit correctly, and  
are securely anchored by the floor anchors.  
Position the rear seat floor mats properly. If they are  
not properly positioned, the floor mats can interfere  
with the front seat functions.  
The driver’s floor mat hooks over the floor anchors, which keep the mat from sliding  
forward. To remove a mat for cleaning, turn the anchor knobs to the unlock  
position. When reinstalling the mat after cleaning, turn the knobs to the lock  
position.  
Do not put additional floor mats on top of the anchored mat.  
*
1Maintaining Genuine Leather  
Maintaining Genuine Leather*  
It is important to clean or wipe away dirt or dust as  
soon as possible. Spills can soak into leather resulting  
in stains. Dirt or dust can cause abrasions in the  
leather. In addition, please note that some dark  
coloured clothing can rub onto the leather seats  
resulting in discoloration or stains.  
To properly clean leather:  
1. Use a vacuum or soft dry cloth first to remove any dirt or dust.  
2. Clean the leather with a soft cloth dampened with a solution comprised of 90%  
water and 10% neutral soap.  
3. Wipe away any soap residue with a clean damp cloth.  
4. Wipe away residual water and allow leather to air dry in the shade.  
* Not available on all models  
533  
18 FIT JAZZ-32T5A6100.book 534 ページ 2017年8月23日 水曜日 午前11時24分  
uuCleaninguExterior Care  
Exterior Care  
Dust off the vehicle body after you drive.  
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a  
painted surface can result in body rust. If you find a scratch, promptly repair it.  
1Washing the Vehicle  
Washing the Vehicle  
Do not spray water into the air intake vents. It can  
cause a malfunction.  
Wash the vehicle regularly. Wash more frequently when driving in the following  
conditions:  
If driving on roads with road salt.  
If driving in coastal areas.  
If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.  
Using an Automated Car Wash  
Make sure to follow the instructions indicated on the automated car wash.  
Remove or store the audio antenna*.  
2 Audio Antenna P. 224  
Air Intake Vents  
Fold in the door mirrors.  
Turn off the automatic intermittent wipers.  
Using High Pressure Cleaners  
Keep sufficient distance between the cleaning nozzle and the vehicle body.  
Take particular care around the windows. Standing too close may cause water to  
enter the vehicle interior.  
Do not spray high pressure water directly into the engine compartment. Instead,  
use low pressure water and a mild detergent.  
* Not available on all models  
534  
18 FIT JAZZ-32T5A6100.book 535 ページ 2017年8月23日 水曜日 午前11時24分  
uuCleaninguExterior Care  
1Applying Wax  
Applying Wax  
NOTICE  
A good coat of automotive body wax helps to protect your vehicle’s paint from the  
elements. Wax will wear off over time and expose your vehicle’s paint to the  
elements, so reapply as necessary.  
Chemical solvents and strong cleaners can damage  
the paint, metal, and plastic on your vehicle. Wipe  
away spills immediately.  
1Maintaining the Bumpers and Other Resin Coated Parts  
Maintaining the Bumpers and Other Resin Coated Parts  
Ask a dealer about the correct coating material when  
you want to repair the painted surface of the parts  
made of resin.  
If you get petrol, oil, engine coolant, or battery fluid on resin coated parts, they may  
be stained or the coating may peel. Promptly wipe it away using a soft cloth and  
clean water.  
Cleaning the Window  
Wipe using a glass cleaner.  
Maintaining Aluminium Wheels*  
Aluminium is susceptible to deterioration caused by salt and other road  
contaminants. When necessary, as early as possible use a sponge and mild detergent  
to wipe away these contaminants. Do not use a stiff brush or harsh chemicals  
(including some commercial wheel cleaners). These can damage the protective finish  
on aluminium alloy wheels, resulting in corrosion. Depending on the type of finish,  
the wheels also may lose their luster or appear burnished. To avoid water stains,  
wipe the wheels dry with a cloth while they are still wet.  
* Not available on all models  
Continued  
535  
18 FIT JAZZ-32T5A6100.book 536 ページ 2017年8月23日 水曜日 午前11時24分  
uuCleaninguExterior Care  
Fogged Exterior Light Lenses  
The inside lenses of exterior lights (headlights, brake lights, etc.) may fog temporarily  
if you have driven in the rain, or after the vehicle has been run through a car wash.  
Dew condensation also may build up inside the lenses when there is a significant  
enough difference between the ambient and inside lens temperatures (similar to  
vehicle windows fogging up in rainy conditions). These conditions are natural  
processes, not structural design problems in the exterior lights.  
Lens design characteristics may result in moisture developing on the light lens frame  
surfaces. This also is not a malfunction.  
However, if you see large amounts of water accumulation, or large water drops  
building up inside the lenses, have your vehicle inspected by a dealer.  
536  
18 FIT JAZZ-32T5A6100.book 537 ページ 2017年8月23日 水曜日 午前11時24分  
Accessories and Modifications  
Accessories  
When installing accessories, check the following:  
1Accessories and Modifications  
Do not install accessories on the windscreen. They can obstruct your view and  
delay your reaction to driving conditions.  
3
WARNING  
Do not install any accessories over areas marked SRS Airbag, on the sides or backs  
of the front seats, on front or side pillars, or near the side windows. Accessories  
installed in these areas may interfere with proper operation of the vehicle’s  
airbags or may be propelled into you or another occupant if the airbags deploy.  
Be sure electronic accessories do not overload electrical circuits or interfere with  
proper operation of your vehicle.  
Improper accessories or modifications can  
affect your vehicle's handling, stability, and  
performance, and cause a crash in which  
you can be seriously hurt or killed.  
Follow all instructions in this owner's  
manual regarding accessories and  
modifications.  
2 Fuses P. 573  
Before installing any electronic accessory, have the installer contact a dealer for  
assistance. If possible, have a dealer inspect the final installation.  
When properly installed, mobile phones, alarms, two-  
way radios, radio antenna, and low-powered audio  
systems should not interfere with your vehicle’s  
computer controlled systems, such as your airbags  
and anti-lock brakes.  
Modifications  
Do not modify your vehicle in a manner that may affect its handling, stability, or  
reliability, or install non-genuine Honda parts or accessories that may have a similar  
effect.  
Even minor modifications to vehicle systems can affect overall vehicle performance.  
Always make sure all equipment is properly installed and maintained, and do not  
make any modification to your vehicle or its systems that might cause your vehicle  
to no longer meet your country’s and local regulations.  
Honda Genuine accessories are recommended to  
ensure proper operation on your vehicle.  
The on-board diagnostic port (OBD-II/SAE J1962 connector) installed on this vehicle  
is intended to be used with automobile system diagnostic devices or with other  
devices that Honda has approved. Use of any other type of device may adversely  
affect the vehicle's electronic systems or allow them to be compromised, possibly  
resulting in a system malfunction, drained battery, or other unexpected problems.  
Do not modify or attempt to repair any of the electrical components.  
537  
18 FIT JAZZ-32T5A6100.book 538 ページ 2017年8月23日 水曜日 午前11時24分  
538  

Related Topics

Popular Owner Manuals