Get Maintenance -> Replacing Light Bulbs Guide for Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 499 ページ２０１７年８月２３日　水曜日　午前１１時２４分

Replacing Light Bulbs

Headlight Bulbs

When replacing, use the following bulbs.

1Headlight Bulbs

Models with halogen high beam and low beam headlights

NOTICE

Halogen bulbs get very hot when lit.

Oil, perspiration, or a scratch on the glass can cause

the bulb to overheat and shatter.

High/Low beam headlight: 60/55 W (H4LL/HB2LL^*, H4 LL, H4 for halogen

bulb type)

Models with LED high beam and low beam headlights

The headlight aim is set by the factory, and does not

need to be adjusted. However, if you regularly carry

heavy items in the luggage area or tow a trailer, have

the aiming readjusted at a dealer or by a qualified

technician.

High beam headlight: LED type

Low beam headlight: LED type

High/Low Beam Headlight^*

■

1. Remove the coupler.

Coupler

When replacing a halogen bulb, handle it by its base,

and protect the glass from contact with your skin or

hard objects. If you touch the glass, clean it with

denatured alcohol and a clean cloth.

2. Remove the rubber weather seal.

Models with LED high beam and low beam headlights

High beam and low beam headlights are LED type.

Have an authorized Honda dealer inspect and replace

the light assembly.

Rubber Weather Seal

3. Remove the hold-down wire, then remove

Hold-Down Wire

the bulb.

4. Insert a new bulb.

* Not available on all models

Continued

499

18 FIT JAZZ-32T5A6100.book 500 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuHeadlight Bulbs

5. Reinstall the hold-down wire. Hook the end

of the wire on the knob in the slot.

u You can see if the hold-down wire is in

the right place from the inspection

window.

Hold-Down

Wire

6. Reinstall the rubber weather seal.

7. Insert the coupler into the connector of the

bulb.

Inspection Window

500

18 FIT JAZZ-32T5A6100.book 501 ページ２０１７年８月２３日　水曜日　午前１１時２４分

*

uuReplacing Light BulbsuFront Fog Light Bulbs

Front Fog Light Bulbs^*

*

When replacing, use the following bulbs.

1Front Fog Light Bulbs

Front Fog Light: 35 W (H8 for halogen bulb type)

NOTICE

Halogen bulbs get very hot when lit. Oil, perspiration,

or a scratch on the glass can cause the bulb to

overheat and shatter.

1. Remove the screws using a Phillips-head

screwdriver and remove the holding clips

using a flat-tip screwdriver.

Clip

When replacing a halogen bulb, handle it by its

plastic case, and protect the glass from contact with

your skin or hard objects. If you touch the glass, clean

it with denatured alcohol and a clean cloth.

2. Pull the under part of the inner fender cover

down.

Cover

Screw

Holding clip

Insert a flat-tip screwdriver, lift and remove the

central pin to remove the clip.

Central Pin

* Not available on all models

Continued

501

18 FIT JAZZ-32T5A6100.book 502 ページ２０１７年８月２３日　水曜日　午前１１時２４分

*

uuReplacing Light BulbsuFront Fog Light Bulbs

*

3. Push the tab to remove the coupler.

1Front Fog Light Bulbs

Bulbs

4. Rotate the old bulb to the left to remove.

5. Insert a new bulb into the fog light

Insert the clip with the central pin raised, and push

until it is flat.

Coupler

assembly and turn it to the right.

6. Insert the coupler into the connector of the

bulb.

Push until the

pin is flat.

Tab

* Not available on all models

502

18 FIT JAZZ-32T5A6100.book 503 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuFront Turn Signal Light Bulbs

Front Turn Signal Light Bulbs

When replacing, use the following bulbs.

Front Turn Signal Light: 21 W (Amber)

1. Turn the socket to the left and remove it.

Bulb

2. Pull the bulb straight out of its holder.

3. Insert a new bulb.

Socket

503

18 FIT JAZZ-32T5A6100.book 504 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuPosition Light Bulbs

Models with bulb type position lights

Position Light Bulbs

When replacing, use the following bulbs.

Position Light: 5 W

1. Turn the socket to the left and remove it,

Bulb

then remove the old bulb.

2. Insert a new bulb.

Socket

Models with LED type position lights

Position Lights

Position lights are LED type. Have an authorised Honda dealer inspect and replace

the light assembly.

504

18 FIT JAZZ-32T5A6100.book 505 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuSide Turn Signal/Emergency Indicator Lights

Side Turn Signal/Emergency Indicator Lights

Door mirrors have side turn signal lights. Have an authorized Honda dealer inspect

and replace the light bulbs.

Daytime Running Lights

Daytime running lights are the LED type. Have an authorized Honda dealer inspect

and replace the light assembly.

505

18 FIT JAZZ-32T5A6100.book 506 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuBack-Up Light, Rear Turn Signal Light and Rear Fog Light Bulbs

Back-Up Light, Rear Turn Signal Light and Rear Fog

Light Bulbs

When replacing, use the following bulbs.

Back-Up Light: 16 W

Rear Turn Signal Light: 21 W (Amber)

Rear Fog Light: 21 W

1. Use a Phillips-head screwdriver to remove

the bolts.

2. Pull the light assembly out of the rear pillar.

Bolt

3. Turn the socket to the left and remove it.

Remove the old bulb.

4. Insert a new bulb.

5. Slide the light assembly onto the guide on

the body.

Bulb

Socket

506

18 FIT JAZZ-32T5A6100.book 507 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuBrake/Taillights

Brake/Taillights

Brake/taillights are the LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

507

18 FIT JAZZ-32T5A6100.book 508 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuRear Licence Plate Light Bulbs

Rear Licence Plate Light Bulbs

When replacing, use the following bulbs.

Rear Licence Plate Light: 5 W

1. Push the lens on the left and pull out the

lens and the socket attached to it.

Lens

2. Remove the licence plate light assembly by

squeezing the tabs on both sides of the

socket.

3. Remove the old bulb and insert a new bulb.

Bulb

High-Mount Brake Light

High-mount brake light is LED type. Have an authorized Honda dealer inspect and

replace the light assembly.

508

18 FIT JAZZ-32T5A6100.book 509 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuOther Light Bulbs

Other Light Bulbs

Models with colour audio system

Ceiling Light Bulb

Map Light Bulbs

■

Models with display audio system

When replacing, use the following bulb.

When replacing, use the following bulbs.

Ceiling Light: 8 W

Map Light: 8 W

1. Pry on the edge of the cover using a flat-

tip screwdriver to remove the cover.

u Wrap the flat-tip screwdriver with a

cloth to prevent scratches.

1. Pry on the edge of the cover using a flat-

tip screwdriver to remove the cover.

u Wrap the flat-tip screwdriver with a

cloth to prevent scratches.

1. Pry on the edge of the cover using a flat-

tip screwdriver to remove the cover.

u Wrap the flat-tip screwdriver with a

cloth to prevent scratches.

Bulb

2. Remove the old bulb and insert a new

bulb.

2. Remove the old bulb and insert a new

bulb.

2. Remove the old bulb and insert a new

bulb.

Continued

509

18 FIT JAZZ-32T5A6100.book 510 ページ２０１７年８月２３日　水曜日　午前１１時２４分

uuReplacing Light BulbsuOther Light Bulbs

Luggage Area Light Bulb

■

When replacing, use the following bulbs.

Luggage Area Light: 5 W

Bulb

2. Remove the old bulb and insert a new

bulb.

1. Pry on the edge of the cover using a flat-

tip screwdriver to remove the cover.

u Wrap the flat-tip screwdriver with a

cloth to prevent scratches.

510

Maintenance -> Replacing Light Bulbs for Your Honda Jazz 4 Door Third Generation (2016-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals