2016-2020 Honda Jazz 4 Door Maintenance -> Checking and Maintaining Wiper Blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Checking and Maintaining Wiper Blades for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 511 ページ 2017年8月23日 水曜日 午前11時24分  
Checking and Maintaining Wiper Blades  
Checking Wiper Blades  
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces  
of the blade may scratch the window glass.  
Changing the Front Wiper Blade Rubber  
1Changing the Front Wiper Blade Rubber  
1. Lift the driver side wiper arm first, then the  
NOTICE  
Avoid dropping the wiper arm onto the windscreen,  
it may damage the wiper arm and/or the windscreen.  
passenger side.  
2. Press and hold the tab, then slide the holder  
off the wiper arm.  
Lock Tab  
Continued  
511  
18 FIT JAZZ-32T5A6100.book 512 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber  
3. Slide the wiper blade out of the holder by  
pulling the tabbed end out.  
Blade  
4. Slide the new wiper blade onto the holder  
from the bottom end.  
u The tab on the blade should fit in the  
indent of the top of the wiper holder.  
5. Slide the holder onto the wiper arm  
Blade  
Tab  
securely.  
6. Lower the passenger side wiper arm first,  
then the driver side.  
512  
18 FIT JAZZ-32T5A6100.book 513 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
Changing the Rear Wiper Blade Rubber  
1. Raise the wiper arm off.  
1Changing the Rear Wiper Blade Rubber  
2. Pivot the bottom end of the wiper blade up  
NOTICE  
until it comes off from the wiper arm.  
Avoid dropping the wiper arm; it may damage the  
rear window.  
Wiper Arm  
3. Slide the wiper blade out from the end with  
the indent.  
Blade  
Continued  
513  
18 FIT JAZZ-32T5A6100.book 514 ページ 2017年8月23日 水曜日 午前11時24分  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber  
4. Remove the retainers from the wiper blade  
that has been removed, and mount to a  
new rubber blade.  
Retainer  
5. Slide the wiper blade onto the holder.  
u Make sure it is engaged correctly, then  
install the wiper blade assembly onto the  
wiper arm.  
Holder  
514  

Related Topics

Popular Owner Manuals