Get Instrument cluster Guide for Hyundai Bayon SUV Second Generation (2021-2024)

4. Instrument cluster

Instrument cluster ..............................................................................................4-2

Instrument cluster control..............................................................................4-3

Gauges and meters .........................................................................................4-3

Transmission shift indicator............................................................................4-7

Warning and indicator lights ......................................................................... 4-8

Cluster display messages ............................................................................4-20

Cluster display...................................................................................................4-25

Cluster display control ..................................................................................4-25

Cluster display modes ..................................................................................4-26

User settings mode .......................................................................................4-28

Trip computer ................................................................................................4-34

4

Instrument cluster

INSTRUMENT CLUSTER

OAC3043001TU

1. Tachometer

2. Speedometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. Warning and indicator lights

6. Cluster display (including Trip computer)

The actual cluster in the vehicle may differ from the illustration.

For more details, refer to the “Gauges and Meters” in this chapter.

4-2

04

Tachometer

Instrument cluster control

WARNING

Never adjust the instrument cluster

whilst driving. This could result in

loss of control and lead to an acci-

dent that may cause death, serious

injury, or vehicle damage.

Gauges and meters

Speedometer

OAC3043004TU

The tachometer indicates the approxi-

mate number of engine revolutions per

minute (RPM).

MPH, km/h

Use the tachometer to select the cor-

rect shift points and to prevent lugging

and/or over-revving the engine.

NOTICE

Do not operate the engine within the

tachometer’s RED ZONE. This may

cause severe engine damage.

OAC3043003TU

The speedometer indicates the speed

of the vehicle and is calibrated in miles

per hour (MPH).

4-3

Instrument cluster

Engine Coolant Temperature

Gauge

Fuel Gauge

OAC3043010TU

OAC3043009TU

This gauge indicates the approximate

amount of fuel remaining in the fuel

tank.

This gauge indicates the temperature

of the engine coolant when the ignition

switch is in the ON position.

Information

i

NOTICE

• The fuel tank capacity is given in

chapter 2.

• The fuel gauge is supplemented by a

low fuel warning light, which will

illuminate when the fuel tank is

nearly empty.

• On inclines or curves, the fuel gauge

pointer may fluctuate or the low fuel

warning light may come on earlier

than usual due to the movement of

fuel in the tank.

If the gauge pointer moves beyond

the normal range area toward the

“130” position, it indicates overheat-

ing that may damage the engine.

Do not continue driving with an over-

heated engine. If your vehicle over-

heats, refer to “If the Engine Over-

heats” in chapter 8.

WARNING

Never remove the radiator cap or

reservoir cap when the engine is hot.

The engine coolant is under pres-

sure and could cause severe burns.

Wait until the engine is cool before

adding coolant to the reservoir.

4-4

04

The temperature unit (from °C to °F or

from °F to °C) can be changed by:

WARNING

Running out of fuel can expose vehi-

cle occupants to danger.

You must stop and obtain additional

fuel as soon as possible after the

warning light comes on or when the

gauge indicator comes close to the

“0” level.

NOTICE

Avoid driving with an extremely low

fuel level. Running out of fuel could

cause the engine to misfire damag-

ing the catalytic converter.

OTM048112

- User Settings mode in the Cluster :

You can change the temperature unit

in the “User Settings > Other Fea-

tures > Temperature Unit” .

- Automatic climate control system :

Whilst pressing the OFF button,

press the AUTO button for 3 seconds

or more.

Outside Temperature Gauge

This gauge indicates the current out-

side air temperatures either in Celsius

(°C) or Fahrenheit.

- Temperature range :

-40°C-60°C (-40°F-140°F)

The outside temperature on the display

may not immediately change like a gen-

eral thermometer not to distract the

driver.

The temperature unit of the instrument

cluster and climate control system will

change at once.

4-5

Instrument cluster

Odometer

Information

i

• If the vehicle is not on level ground

or the battery power has been inter-

rupted, the distance to empty func-

tion may not operate correctly.

• The distance to empty may differ

from the actual driving distance as it

is an estimate of the available driving

distance.

• The trip computer may not register

additional fuel if less than 1.6 gallons

(6 liters) of fuel are added to the

vehicle.

• The distance to empty may vary sig-

nificantly based on driving condi-

tions, driving habits, and condition

of the vehicle.

OPDE046141R

The odometer indicates the total dis-

tance that the vehicle has been driven

and should be used to determine when

periodic maintenance should be per-

formed.

Distance to empty

• The infotainment system may change

after software updates. For more

information, refer to the manual

provided in the infotainment system

and the quick reference guide.

OOS048469N

• The distance to empty is the estimat-

ed distance the vehicle can be driven

with the remaining fuel.

• If the estimated distance is below 1

mi. (1 km), the trip computer will dis-

play “---” as distance to empty.

4-6

04

Manual Transmission Shift

Indicator (if equipped)

Transmission shift indicator

(if equipped)

Automated manual transmission

Shift Indicator (if equipped)

OPDE046142

This indicator informs which gear is

desired whilst driving to save fuel.

OTL045132

• Shifting up : p2, p3, p4, p5

• Shifting down : q1, q2, q3, q4

This indicator informs the current gear

engaged.

• Reverse : R

• Neutral : N

For example

• Drive Mode : D1, D2, D3, D4, D5

• Manual Mode : 1, 2, 3, 4, 5

: Indicates that shifting up to the

3rd gear is desired (currently the

shift lever is in the 2nd or 1st

gear).

: Indicates that shifting down to the

3rd gear is desired (currently the

shift lever is in the 4th, 5th gear).

Information

i

The infotainment system may change

after software updates. For more infor-

mation, refer to the manual provided

in the infotainment system and the

quick reference guide.

4-7

Instrument cluster

Parking Brake & Brake

Fluid Warning Light

Warning and indicator lights

Information

i

This warning light illuminates:

Make sure that all warning lights are

OFF after starting the engine. If any

light is still ON, this indicates a situa-

tion that needs attention.

• When you set the ignition switch to

the ON position.

- It illuminates for about 3 seconds

- It remains on if the parking brake is

applied.

• When the parking brake is applied.

Airbag Warning Light

• When the brake fluid level in the res-

ervoir is low.

- If the warning light illuminates with

the parking brake released, it indi-

cates the brake fluid level in the

reservoir is low.

This warning light illuminates:

• When you set the ignition switch to

the ON position.

- It illuminates for about 6 seconds

and then goes off.

• When there is a malfunction with the

SRS.

• In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

If the brake fluid level in the reser-

voir is low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and

add fluid as required (For more

details, refer to “Brake Fluid” in

chapter 9). After adding brake fluid,

check all brake components for fluid

leaks. If a brake fluid leak is found, or

if the warning light remains on, or if

the brakes do not operate properly,

do not drive the vehicle. We recom-

mend that you have the vehicle

inspected by a HYUNDAI authorised

repairer.

Seat Belt Warning

Light

This warning light informs the driver

and front passenger that the seat belt is

not fastened.

For more details, refer to the “Seat

Belts” in chapter 3.

4-8

04

Dual-diagonal braking system

Anti-lock Brake

System (ABS) Warning

Light

Your vehicle is equipped with dual-di-

agonal braking systems. This means

you still have braking on two wheels

even if one of the dual systems should

fail.

With only one of the dual systems work-

ing, more than normal pedal travel and

greater pedal pressure are required to

stop the vehicle.

This warning light illuminates:

• When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

- It illuminates for about 3 seconds

and then goes off.

• When there is a malfunction with the

ABS (The normal braking system will

still be operational without the assis-

tance of the anti-lock brake system).

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

Also, the vehicle will not stop in as short

a distance with only a portion of the

brake system working.

If the brakes fail whilst you are driving,

shift to a lower gear for additional

engine braking and stop the vehicle as

soon as it is safe to do so.

Electronic Brake Force

Distribution (EBD)

System Warning Light

WARNING

Parking Brake & Brake Fluid

Warning Light

Driving the vehicle with a warning

light ON is dangerous. If the Parking

Brake & Brake Fluid Warning Light

illuminates with the parking brake

released, it indicates that the brake

fluid level is low.

These two warning lights illuminate

at the same time whilst driving:

• When the ABS and regular brake

system may not work normally.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

4-9

Instrument cluster

Motor Driven Power

Steering (MDPS)

WARNING

Electronic Brake Force

Distribution (EBD) System

Warning Light

This warning light illuminates:

• When you set the ignition switch to

the ON position.

- It illuminates for about 3 seconds

and then goes off.

• When there is a malfunction with the

MDPS.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

When both ABS and Parking Brake &

Brake Fluid Warning Lights are on,

the brake system will not work nor-

mally and you may experience an

unexpected and dangerous situation

during sudden braking.

In this case, avoid high speed driving

and abrupt braking.

We recommend you have the vehicle

inspected by a HYUNDAI authorised

repairer as soon as possible.

Information

i

Electronic Brake Force Distribution

(EBD) System Warning Light

When the ABS Warning Light is on or

both ABS and Parking Brake & Brake

Fluid Warning Lights are on, the

speedometer, odometer, or tripmeter

may not work. Also, the MDPS

Warning Light may illuminate and the

steering effort may increase or

decrease.

In this case, we recommend you have

the vehicle inspected by a HYUNDAI

authorised repairer as soon as possible.

4-10

04

Malfunction Indicator

Lamp (MIL)

Charging System

Warning Light

This warning light illuminates:

• When you set the ignition switch to

• When there is a malfunction with

either the alternator or electrical

charging system.

the ON position.

- It illuminates for about 3 seconds

and then goes off.

• When there is a malfunction with the

emission control system.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

If there is a malfunction with either

the alternator or electrical charging

system:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

alternator drive belt for looseness or

breakage.

NOTICE

• Driving with the Malfunction Indi-

cator Lamp (MIL) on may cause

damage to the emission control

system which could affect drivabil-

ity and/or fuel economy.

If the belt is adjusted properly, there

may be a problem in the electrical

charging system.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer as

soon as possible.

• If the enhanced engine protection

system becomes activated due to

lack of engine oil, engine power

will be limited. If such condition

continues repeatedly, the Malfunc-

tion Indicator Lamp will illuminate.

CAUTION

If the Malfunction Indicator Lamp

(MIL) illuminates, potential catalytic

converter damage is possible which

could result in loss of engine power.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer as

soon as possible.

4-11

Instrument cluster

Engine Oil Pressure

Warning Light

NOTICE

If the engine does not stop immedi-

ately after the Engine Oil Pressure

Warning Light is illuminated, severe

damage could result.

This warning light illuminates:

• When the engine oil pressure is low.

If the engine oil pressure is low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

engine oil level (For more details,

refer to “Engine Oil” in chapter 9).

If the level is low, add oil as required.

If the warning light remains on after

adding oil or if oil is not available, we

recommend that you have the vehi-

cle inspected by a HYUNDAI autho-

rised repairer as soon as possible.

Continued driving with the warning light

on may cause engine failure.

Information

i

When engine oil pressure decreases

due to insufficient engine oil, etc., the

Engine Oil Pressure warning light will

illuminate. In addition, the enhanced

engine protection system which limits

engine power will be activated. If the

engine oil pressure is restored, the

Engine Oil Pressure warning light and

the enhanced engine protection system

will turn off.

4-12

04

Engine Oil Level

Warning Light (if

equipped)

NOTICE

If the light comes on continuously

after adding the engine oil and trav-

elling about 30-60 mi. (50-100 km)

after the engine warms up, we rec-

ommend that the system be checked

by a HYUNDAI authorised repairer.

The engine oil level warning light illumi-

nates when the engine oil level should

be checked.

If the warning light comes on, check the

engine oil level as soon as possible and

add engine oil as required.

Slowly pour the recommended oil little

by little into a funnel. (Oil refill capacity :

about 0.6-1.0 l)

Even if this light doesn't come on

after the engine has started, the

engine oil should be checked and

supplied periodically.

Use only the specified engine oil. (Refer

to "Recommended lubricants and

capacities" in chapter 2.)

Low Fuel Level

Warning Light

Do not overfill the engine oil. Make sure

the oil level is not above F (Full) mark

on the dipstick.

This warning light illuminates:

• When the fuel tank is nearly empty.

Add fuel as soon as possible.

Information

i

NOTICE

• If you travel about 30-60 mi. (50-100

km) after the engine warms up, after

adding the engine oil, the warning

light will go off.

• Cycle the ignition from OFF to ON 3

times within 10 seconds, the warning

light will go off immediately.

However, when you turn off the

warning light without adding the

engine oil, the light will come on

again after travelling about 30-60

mi. (50-100 km) after the engine

warms up.

Driving with the Low Fuel Level

warning light on or with the fuel level

below “0” can cause the engine to

misfire and damage the catalytic

converter (if equipped).

4-13

Instrument cluster

Master Warning Light

Low Tyre Pressure

Warning Light

(if equipped)

This indicator light illuminates:

This warning light illuminates:

• When there is a malfunction in opera-

tion in any of the following systems:

• When you set the ignition switch to

the ON position.

- Forward Collision-Avoidance Assist

malfunction (if equipped)

- It illuminates for about 3 seconds

and then goes off.

- Forward Collision-Avoidance Assist

camera blocked (if equipped)

- Lamp malfunction (if equipped)

- High Beam Assist malfunction (if

equipped)

- Tyre Pressure Monitoring System

(TPMS) malfunction (if equipped)

• When one or more of your tyres are

significantly underinflated (The loca-

tion of the underinflated tyres are dis-

played on the cluster display).

For more details, refer to “Tyre Pres-

sure Monitoring System (TPMS)” in

chapter 8.

This warning light remains on after

blinking for about 60 seconds or

repeatedly blinks on and off at

about 3 second intervals:

To identify the details of the warning,

look at the cluster display.

• When there is a malfunction with the

TPMS.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer as

soon as possible.

For more details, refer to “Tyre Pres-

sure Monitoring System (TPMS)” in

chapter 8.

4-14

04

Electronic Stability

Control (ESC)

Indicator Light

WARNING

Safe Stopping

• The TPMS cannot alert you to

severe and sudden tyre damage

caused by external factors.

This indicator light illuminates:

• When you set the ignition switch to

the ON position.

- It illuminates for about 3 seconds

and then goes off.

• When there is a malfunction with the

ESC system.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

• If you notice any vehicle instabili-

ty, immediately take your foot off

the accelerator pedal, apply the

brakes gradually with light force,

and slowly move to a safe position

off the road.

Exhaust System (GPF)

Warning Light

(Petrol Engine,

if equipped)

This indicator light blinks:

• Whilst the ESC is operating.

For more details, refer to “Electronic

Stability Control (ESC)” in chapter 6.

This warning light illuminates:

• This warning light illuminates, when

accumulated soot reaches a certain

amount.

• When this warning light illuminates, it

may turn off after driving the vehicle

at more than 50 mph(80 km/h) for

about 30 minutes (above 3rd gear

with 1,500-4,000 engine RPM).

If this warning light blinks in spite of the

procedure (at this time cluster display

warning message will be displayed),

we recommend that you have the GPF

system checked by a HYUNDAI autho-

rised repairer.

Electronic Stability

Control (ESC) OFF

Indicator Light

This indicator light illuminates:

• When you set the ignition switch to

the ON position.

- It illuminates for about 3 seconds

and then goes off.

• When you deactivate the ESC sys-

tem by pressing the ESC OFF button.

For more details, refer to “Electronic

Stability Control (ESC)” in chapter 6.

NOTICE

If you continue to drive with the GPF

warning light blinking for a long

time, the GPF system can be dam-

aged and fuel consumption can

worsen.

4-15

Instrument cluster

AUTO STOP Indicator

Light (if equipped)

Immobiliser Indicator

Light (without smart

key) (if equipped)

This indicator light illuminates:

• When the engine enters the Idle Stop

mode of the ISG (Idle Stop and Go)

system.

• When the vehicle detects the immo-

biliser in the key with the key ignition

in the ON position.

• When the automatic starting occurs,

the AUTO STOP indicator on the

cluster will blink for 5 seconds.

- At this time, you can start the

engine.

- The indicator light goes off after

starting the engine.

For more details, refer to the “ISG

(Idle Stop and Go) system” in chap-

ter 6.

This indicator light blinks:

• When there is a malfunction with the

immobiliser system.

Information

i

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

When the engine automatically starts

by the ISG system, some warning lights

(ABS, ESC, ESC OFF, MDPS or

Parking brake warning light) may

turn on for a few seconds.

This happens because of low battery

voltage. It does not mean the system

has malfunctioned.

4-16

04

Immobiliser Indicator

Light (with smart key)

(if equipped)

Turn Signal Indicator

Light

This indicator light illuminates for

up to 30 seconds:

This indicator light blinks:

• When you operate the turn signals.

• When the vehicle detects the smart

key in the vehicle with the Engine

Start/Stop button in the ACC or ON

position.

- At this time, you can start the

engine.

If any of the following occur, there may

be a malfunction with the turn signal

system.

- The turn signal indicator light illumi-

nates but does not blink

- The indicator light goes off after

starting the engine.

- The turn signal indicator light blinks

rapidly

- The turn signal indicator light does

not illuminate at all

If any of these conditions occur, we rec-

ommend that you have your vehicle

inspected by a HYUNDAI authorised

repairer.

This indicator light blinks for a few

seconds:

• When the smart key is not in the vehi-

cle.

- At this time, you cannot start the

engine.

Low Beam Indicator

Light

This indicator light illuminates for 2

seconds and goes off:

• If the smart key is in the vehicle and

the Engine Start/Stop button is ON,

but the vehicle cannot detect the

smart key.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

This indicator light illuminates:

• When the headlights are on.

High Beam Indicator

Light

This indicator light illuminates:

This indicator light blinks:

• When there is a malfunction with the

immobiliser system.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

• When the headlights are on and in

the high beam position.

• When the turn signal lever is pulled

into the Flash-to-Pass position.

4-17

Instrument cluster

High Beam Assist

(HBA) indicator light (if

equipped)

Press Brake

(for Automated Manual

Transmission)

This indicator light illuminates :

• When changing gear position with out

depressing brake pedal.

• When trying to start the engine with-

out depressing brake pedal.

This warning light illuminates:

When the high-beam is on with the light

switch in the AUTO light position.

• White: When High Beam Assist is

ready to operate.

• Green: When High Beam Assist is

operating.

If your vehicle detects oncoming or pre-

ceding vehicles, High Beam Assist will

switch the high beam to low beam auto-

matically.

Parking Brake

Engaged

(for Automated Manual

Transmission)

This indicator light illuminates :

For more details, refer to “High

Beam Assist (HBA)” in chapter 5.

• When engine is turned off without

engaging parking brake lever. The

indicator light illuminates for about 5

seconds then goes off.

Light ON Indicator

Light

This indicator light illuminates:

• When the tail lights is on.

Front Fog Indicator

Light (if equipped)

This indicator light illuminates:

• When the front fog lights are on.

Rear Fog Indicator

Light (if equipped)

This indicator light illuminates:

• When the rear fog lights are on.

4-18

04

Type A

Type B

Cruise Indicator Light

(if equipped)

Forward Safety warn-

ing light

(if equipped)

The warning light illuminates:

• When the ignition switch is in the ON

position. It illuminates for about 3

seconds and then goes off.

• Yellow: When Forward Safety of For-

ward Collision-Avoidance Assist is

deselected, disabled, or a malfunc-

tion is detected.

If the yellow warning light remains on

after the sensor has been uncovered or

unblocked when Forward Safety is set,

we recommend that your vehicle be

inspected by an authorized HYUNDAI

dealer.

This indicator light illuminates:

• When Cruise Control system is

enabled.

For more details, refer to “Cruise

Control” in chapter 7.

Type A

Speed Limiter

Indicator Light (if

equipped)

This warning light blinks:

Type B

• Red: When Forward Safety function

is operating.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

in chapter 7.

This indicator light illuminates:

• When the speed limiter is enabled.

For more details, refer to "Manual

Speed Limit Assist (MSLA)" or "Intel-

ligent Speed Limit Assist (ISLA)" in

chapter 7.

4-19

Instrument cluster

Lane Safety indicator

light

(if equipped)

Cluster display messages

Key not in vehicle

(for smart key system)

This warning message is displayed if

the smart key is not in the vehicle when

you open or close door in the ACC posi-

tion or ON position. The warning sound

is heard when you close door without a

smart key in vehicle.

This indicator light illuminates:

• When the ignition switch is in the ON

position. It illuminates for about 3

seconds and then goes off.

• Gray: When Lane Keeping Assist

operating conditions are not satisfied.

When attempting to start the vehicle

always have the smart key with you.

• Green: When Lane Keeping Assist

operating conditions are satisfied.

• Yellow: When Lane Safety is dese-

lected, disabled, or a malfunction is

detected

If the yellow warning light remains on

after the sensor has been uncovered

or unblocked when Lane Safety is

set, we recommend that your vehicle

Key not detected

(for smart key system)

This warning message is displayed if

the smart key is not detected when you

press the Engine Start/Stop button.

be inspected

HYUNDAI dealer.

by an authorized

Press START button with key

(for smart key system)

This warning message is displayed if

you press the Engine Start/Stop button

whilst the warning message “Key not

detected” is displayed.

At this time, the immobiliser indicator

light blinks.

The indicator light blinks:

• Green: When Lane Keeping Assist is

operating.

For more details, refer to “Lane

Keeping Assist (LKA)” in chapter 7.

Information

i

Low Key Battery

(for smart key system)

The infotainment system may change

after software updates. For more infor-

mation, refer to the manual provided

in the infotainment system and the

quick reference guide.

This warning message is displayed if

the battery of the smart key is dis-

charged whilst changing the Engine

Start/Stop button to the OFF position.

4-20

04

Press brake pedal to start

engine (for smart key system

and Automated Manual

Transmission)

This warning message is displayed if

the Engine Start/Stop button changes

to the ACC position twice by pressing

the button repeatedly without depress-

ing the brake pedal.

Shift to N to start engine

(for smart key system and

Automated Manual

Transmission)

This warning message is displayed if

you try to start the engine with the shift

button not in the N (Neutral) position.

Information

i

You can start the vehicle by depressing

the brake pedal.

You can start the engine with the shift

lever in the N (Neutral) position.

Press clutch pedal to start

engine (for smart key system

and Manual transmission)

This warning message is displayed if

the Engine Start/Stop button is in the

ACC position twice by pressing the but-

ton repeatedly without depressing the

clutch pedal.

Check BRAKE SWITCH fuse (for

smart key system and

Automated manual transmis-

sion)

This warning message is displayed if

the brake switch fuse is disconnected.

You need to replace the fuse with a

new one. If that is not possible, you can

start the engine by pressing the Engine

Start/Stop button for 10 seconds in the

ACC position.

Depress the clutch pedal to start the

engine.

Press START button again

(for smart key system)

This message is displayed if you were

unable to start the vehicle when the

Engine Start/Stop button was pressed.

If this occurs, attempt to start the engine

by pressing the Engine Start/Stop but-

ton again.

If the warning message appears each

time you press the Engine Start/Stop

button, we recommend that you have

your vehicle inspected by a HYUNDAI

authorised repairer.

4-21

Instrument cluster

Door, Bonnet, Tailgate open

indicator

Low Tyre Pressure (if equipped)

OAC3073100TU

OAC3059001TU

This warning message is displayed if

the tyre pressure is low.

This warning is displayed indicating

which door, bonnet, or tailgate is open.

For more details, refer to “Tyre Pres-

sure Monitoring System (TPMS)” in

chapter 8.

CAUTION

Before driving the vehicle, you

should confirm that the door/ bon-

net/tailgate are fully closed. Also,

check there is no door/bonnet/tail-

gate open warning light or message

displayed on the instrument cluster.

Heated Steering Wheel turned

off (if equipped)

This message illuminates if the heated

steering wheel will turn off automatical-

ly about 30 minutes after the heated

steering wheel is turned on.

For more details, refer to “Heated

Steering Wheel” in chapter 5.

Low fuel

This warning message is displayed if

the fuel tank is almost out of fuel.

When this message is displayed, the

low fuel level warning light in the cluster

will come on.

It is recommended to look for the near-

est fueling station and refuel as soon as

possible.

4-22

04

Low engine oil (if equipped)

Check headlight (if equipped)

This warning message is displayed

when the engine oil level should be

checked.

This warning message is displayed if

the headlights are not operating proper-

ly.

If this warning message is displayed,

check the engine oil level as soon as

possible and add engine oil as required.

Slowly pour the recommended oil little

by little into a funnel. (Oil refill capacity :

about 0.15-0.26 gal. (0.6-1.0 l)

In addition, if a specific lamp(turn signal

lamp etc.) is not operating properly, the

warning message according to a spe-

cific lamp (turn signal lamp etc.) is dis-

played. A corresponding bulb may need

to be replaced.

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

Use only the specified engine oil. (Refer

to "Recommended lubricants and

capacities" in chapter 2.)

Do not overfill the engine oil. Make sure

the oil level is not above F (Full) mark

on the dipstick.

Check brake light (if equipped)

This warning message is displayed if

the stop lamps are not operating prop-

erly. A lamp may need to be replaced.

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

NOTICE

If the message is displayed continu-

ously after adding the engine oil and

travelling about 30-60 mi. (50-100

km) after the engine warms up, we

recommend that the system be

checked by a HYUNDAI authorised

repairer.

Engine has overheated

(if equipped)

This warning message is displayed

when the engine coolant temperature is

above 120°C (248°F). This means that

the engine is overheated and may be

damaged.

If your vehicle is overheated, refer to

“Overheating” in chapter 8.

4-23

Instrument cluster

Check exhaust system

(if equipped)

This warning message illuminates if the

GPF system has a malfunction. At this

time, GPF warning light also blinks.

In this case, we recommend that you

have the GPF system checked by a

HYUNDAI authorised repairer.

GPF : Petrol Particulate Filter

For more details, refer to "Warning

lights" in this chapter.

Information

i

The infotainment system may change

after software updates. For more infor-

mation, refer to the manual provided

in the infotainment system and the

quick reference guide.

4-24

04

CLUSTER DISPLAY

Cluster display control

OAC3053002TU

The cluster display modes can be changed by using the control buttons.

(1)

(2)

: MODE button for changing modes

: MOVE switch for changing items

,

(3) OK : SELECT/RESET button for setting or resetting the selected item

4-25

Instrument cluster

Cluster display modes

Modes

Symbol

Explanation

This mode displays driving information such as the tripme-

ter, fuel economy, etc.

Trip

For more information, refer to the "Trip Computer" in this

chapter.

Computer

Turn By

Turn (TBT)

This mode displays the state of the navigation.

Driving

Assist

This mode displays the status of the vehicle’s Driver

Assistance systems.

User

Settings

In this mode, you can change settings of the doors, lamps,

etc.

This mode displays warning messages related to the lamp

malfunction, etc.

This mode displays information related to the tire pressure

(TPMS), the state of driving force distribution.

Warning

The information provided may differ depending on which functions are applicable to

your vehicle.

4-26

04

Trip computer mode

Driving Assist mode

OAC3043019TU

OAC3043018TU

LKA

The trip computer mode displays infor-

mation related to vehicle driving param-

eters including fuel economy, tripmeter

information and vehicle speed.

This mode displays the state of Lane

Keeping Assist.

For more details, refer to each sys-

tem information in chapter 7.

For more details, refer to "Trip Com-

puter" in this chapter.

4-27

Instrument cluster

Master warning mode

User settings mode

In this mode, you can change the set-

tings of the instrument cluster, doors,

lamps, etc.

1. Driver assistance

2. Cluster

3. Lights

4. Door

5. Convenience

6. Unit

7. Language

8. Reset

OAC3063028TU

This warning light informs the driver the

following situations.

- Forward Collision-Avoidance Assist

malfunction (if equipped)

The information provided may differ

depending on which functions are

applicable to your vehicle.

- Forward Collision-Avoidance Assist

camera blocked (if equipped)

- Lamp malfunction (if equipped)

- High Beam Assist malfunction (if

equipped)

- Tyre Pressure Monitoring System

(TPMS) malfunction (if equipped)

Engage parking brake to edit set-

tings

This warning message illuminates if

you try to select an item from the User

Settings mode whilst driving.

For your safety, change the User Set-

tings after parking the vehicle, applying

the parking brake and pressing the P

(Park) button.

The Master Warning Light illuminates if

one or more of the above warning situ-

ations occur.

At this time, a Master Warning icon (

will appear beside the User Settings

icon ( ), on the cluster display.

If the warning situation is solved, the

master warning light will be turned off

and the Master Warning icon will disap-

pear.

)

Quick guide (Help)

This mode provides quick guides for

the systems in the User Settings mode.

Select an item, press and hold the OK

button.

For more details about each system,

refer to this Owner’s Manual.

Information

i

The infotainment system may change

after software updates. For more infor-

mation, refer to the manual provided

in the infotainment system and the

quick reference guide.

4-28

04

1. Driver Assistance

Explanation

Items

To set the properties of the Speed Limit system.

• Select country: Selects the country for the Speed Limit System.

• Speed limit assist: Adjusts the vehicle set speed based on the cur-

rent speed limit of the road.

• Speed limit warning: Provides a warning when the speed limit is

exceeded.

Speed Limit

• Speed Limit information: Provides information on speed limits and

additional sign without audible warning

• Off: Disables Speed Limit functions that use the current speed

limit.

To set the volume of the warning sound.

• Warning Volume > High / Medium / Low

Warning

Methods

To set the properties of Driver Attention Warning.

• Leading vehicle departure alert: Alerts the driver during a stop,

when the leading vehicle departs.

DAW (Driver

Attention

Warning)

To set the properties of the Driving Safety system.

• Forward safety: Provides a warning and vehicle control when a

risk of forward collision is detected.

• Forward Safety Warning Timing: Sets the warning timing of the

Forward Safety system.

Driving Safety

• Lane safety: Automatically assists with steering to help prevent

the vehicle from leaving the lane.

* The information provided may differ depending on which functions are applicable to

your vehicle.

4-29

Instrument cluster

2. Cluster

Items

Explanation

• Theme A

• Theme B

• Theme C

Theme

Selection

To activate or deactivate the Wiper/ Light mode.

When activated, the cluster display shows the selected Wiper/Light

mode whenever you changed the mode.

Wiper/Light

Display

Traffic Signs To set the traffic signs displayed.

Icy Road

To activate or deactivate the icy road warning function.

Warning

Welcome

Sound

To activate or deactivate the welcome sound.

3. Lights

Items

Explanation

To adjust the illumination level.

- Level 1~20

Illumination

• Off: The one touch turn signal function will be deactivated.

• 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times

when the turn signal lever is moved slightly.

One Touch

Turn Signal

For more information, refer to the “Lighting” in chapter 5.

To adjust the ambient light brightness level.

• Level 1-4

• Off

Ambient

Light

Brightness

Headlight

Delay

• To activate or deactivate the headlight delay function.

For more information, refer to the “Lighting” in chapter 5.

• To activate or deactivate High Beam Assist.

For more information, refer to the “High Beam Assist (HBA)” in chapter

5.

High Beam

Assist

4-30

04

4. Door

Items

Explanation

• Enable on Speed: All doors will be automatically locked when the

vehicle speed exceeds 15 km/h (9.3mph).

• Off : The auto door lock operation will be deactivated.

Automatically

Lock

• On key out/Vehicle Off : All doors will be automatically unlocked

when the ignition key is removed from the ignition switch or the

Start/Stop button is set to the OFF position.

Automatically

Unlock

• Off : The auto door unlock operation will be canceled.

5. Convenience

Items

Explanation

• To activate or deactivate the rear occupant alert system.

For more information, refer to the “Rear Occupant Alert (ROA)"

in chapter 5.

Rear Occupant

Alert

• Enable Service Interval

• Adjust Interval

• Reset

Service Interval

• On door unlock: The outside rearview mirrors are unfolded and

the welcome light turns on automatically when the doors are

unlocked.

• On driver approach: The outside rearview mirrors are unfolded

and the welcome light turns on automatically when the vehicle

is approached with the smart key.

Welcome Mirror/

Light

For more information, refer to the ‘’Welcome System’’ in chapter

5.

To activate or deactivate the wireless charging system.

For more information, refer to the "Wireless smartphone

charging system" in chapter 5.

Wireless Charging

System

Auto Rear Wiper

(in R)

• To activate or deactivate the Auto Rear Wiper function.

4-31

Instrument cluster

Information

To use the service interval menu, we recommend that you consult a HYUNDAI

authorised repairer.

If the service interval is activated and the time and distance is adjusted, messages

are displayed in the following situations each time the vehicle is turned on.

- Service in: Displayed to inform the driver the remaining mileage and days to ser-

vice.

- Service required: Displayed when the mileage and days to service has been

reached or passed.

Information

If any of the following conditions occur, the mileage and number of days to service

may be incorrect.

- The battery cable is disconnected.

- The fuse switch is turned off.

- The battery is discharged.

4-32

04

6. Units

Items

Explanation

Speed Unit

To select the speed unit. (km/h, MPH)

Temperature Unit

Fuel Econ. Unit

To select the temperature unit. (°C,°F)

To select the fuel economy unit. (km/L, L/100km, US gallon, UK

gallon)

7. Language (if equipped)

Items

Explanation

Choose the language. You can choose the language in infotain-

ment system. (if equipped)

Language

8. Reset

Items

Explanation

You can reset the menus in the User Settings Mode. All menus in the

User Settings Mode are reset to factory settings, except language and

service interval.

Reset

4-33

Instrument cluster

Trip modes

Trip computer

The trip computer is a microcomput-

er-controlled driver information system

that displays information related to driv-

ing.

Drive info

• Trip distance

• Total driving time

• Average fuel economy

Information

i



Since refuelling

• Trip distance

• Total driving time

• Average fuel economy

Some driving information stored in the

trip computer (for example, trip dis-

tance) resets if the battery is discon-

nected.



Accumulated info

• Trip distance

• Total driving time

• Average fuel economy



Auto Stop (if equipped)

4-34

04

Since refueling

Type A

Type B

OAC3063073TU

OBN7I043024

To change the trip mode, toggle the

" switch on the steering wheel.

Trip distance (1), total driving time (2),

and average fuel economy (3) after the

vehicle has been refueled are dis-

played.

"

,

Drive Info

To reset manually, press the OK switch

on the steering wheel for more than 1

second when ‘Since refuelling’ is dis-

played.

Accumulated info

OBN7I043023

Trip distance (1), total driving time (2)

and average fuel economy (3) are dis-

played.

The information is combined for each

ignition cycle. However, when the driv-

er's door is opened after turning off the

engine or the engine is turned on after

3 minutes have passed, the Drive Info

screen will reset.

To reset manually, press the OK switch

on the steering wheel for more than 1

second when ‘Drive Info’ is displayed.

OBN7I043025

Accumulated trip distance (1), total

driving time (2), and average fuel econ-

omy (3) are displayed.

To reset manually, press the OK switch

on the steering wheel for more than 1

second when ‘Accumulated info’ is dis-

played.

4-35

Instrument cluster

Auto stop (if equipped)

OBN7I043026

AUTO STOP display shows the elapsed

time of engine stop by Idle Stop and Go

system.

For more information, refer to the “Idle

Stop and Go (ISG)” section in chapter

6.

4-36

Instrument cluster for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals