What to do in an emergency -> If the engine will not start for Your Hyundai I10 4 Door First Generation (2007-2012)

What to do in an emergency  
IF THE ENGINE WILL NOT START  
F030100AUN  
F030200APA  
2.When the car is stopped, turn on your  
emergency hazard flashers, set the  
parking brake and put the transaxle in  
P (automatic transaxle) or Reverse  
(manual transaxle).  
If engine doesn't turn over or  
turns over slowly  
If engine turns over normally but  
does not start  
1. If your car has an automatic transaxle,  
be sure the gear selector lever is in N  
(Neutral) or P (Park) and the emer-  
gency brake is set.  
1. Check fuel level.  
2. With the ignition switch in the LOCK  
position, check all connectors at the  
ignition coils and spark plugs.  
Reconnect any that may be discon-  
nected or loose.  
3.Have all passengers get out of the car.  
Be sure they all get out on the side of  
the car that is away from traffic.  
2. Check the battery connections to be  
sure they are clean and tight.  
4.When changing a flat tire, follow the  
instruction provided later in this sec-  
tion.  
3. Turn on the interior light. If the light  
dims or goes out when you operate the  
starter, the battery is discharged.  
3. Check the fuel line in the engine com-  
partment.  
4. If the engine still does not start, call an  
authorized HYUNDAI dealer.  
F020300APA  
4. Check the starter connections to be  
sure they are securely tightened.  
If engine stalls while driving  
5. Do not push or pull the vehicle to start  
it. See instructions for "Jump starting".  
1. Reduce your speed gradually, keeping  
a straight line. Move cautiously off the  
road to a safe place.  
2. Turn on your emergency flashers.  
WARNING  
3. Try to start the engine again. If your  
vehicle will not start, contact an  
authorized HYUNDAI dealer.  
If the engine will not start, do not  
push or pull the car to start it. This  
could result in a collision or cause  
other damage. In addition, push or  
pull starting may cause the catalyt-  
ic converter to be overloaded and  
create a fire hazard.  
6 3