Driving your vehicle -> ENGINE START/STOP BUTTON (IF EQUIPPED) for Your Hyundai I10 4 Door Second Generation (2013-2019)

Driving your vehicle  
ENGINE START/STOP BUTTON (IF EQUIPPED)  
Left-hand drive  
Vehicles equipped with anti-theft steering  
column lock  
The steering wheel locks when the  
engine start/stop button is in the OFF  
position to protect you against theft.  
Engine start/stop button position  
OFF  
It locks when the door is opened.  
If the steering wheel is not locked prop-  
erly when you open the driver's door, the  
warning chime will sound. Try locking the  
steering wheel again. If the problem is  
not solved, we recommend that the sys-  
tem be checked by an authorized  
HYUNDAI dealer.  
With manual transaxle  
To turn off the engine (START/RUN posi-  
tion) or vehicle power (ON position), stop  
the vehicle then press the engine  
start/stop button.  
OBA053001  
Right-hand drive  
In addition, if the engine start/stop button  
is in the OFF position after the driver's  
door is opened, the steering wheel will  
not lock and the warning chime will  
sound. In such a situation, close the door.  
Then the steering wheel will lock and the  
warning chime will stop.  
With automatic transaxle  
To turn off the engine (START/RUN posi-  
tion) or vehicle power (ON position),  
press the engine start/stop button with  
the shift lever in the P (Park) position.  
When you press the engine start/stop  
button without the shift lever in the P  
(Park) position, the engine start/stop but-  
ton will not change to the OFF position  
but to the ACC position.  
NOTICE  
OBA053001IN  
If the steering wheel doesn't unlock  
properly, the engine start/stop button  
will not work. Press the engine  
start/stop button while turning the  
steering wheel right and left to release  
tension.  
Illuminated engine start/stop but-  
ton  
Whenever the front door is opened, the  
engine start/stop button will illuminate  
and will go off after about 30 seconds  
after the door is closed.  
5 6  
Driving your vehicle  
ACC(Accessory)  
ON  
WARNING  
To turn the engine off in an emer-  
gency:  
Press and hold the Engine  
Start/Stop button for more than two  
seconds OR Rapidly press and  
release the Engine Start/Stop but-  
ton three times (within three sec-  
onds).  
If the vehicle is still moving, you  
can restart the engine without  
depressing the brake pedal by  
pressing the Engine Start/Stop but-  
ton with the shift lever in the N  
(Neutral) position.  
With manual transaxle  
With manual transaxle  
Press the engine start/stop button when  
the button is in the OFF position without  
depressing the clutch pedal.  
Press the engine start/stop button when  
the button is in the ACC position without  
depressing the clutch pedal.  
With automatic transaxle  
With automatic transaxle  
Press the engine start/stop button while it  
is in the OFF position without depressing  
the brake pedal.  
Press the engine start/stop button while it  
is in the ACC position without depressing  
the brake pedal.  
The steering wheel unlocks (if equipped  
with anti-theft steering column lock) and  
electrical accessories are usable.  
If you leave the engine start/stop button  
in the ACC position for more than one  
hour, the battery power will turn off auto-  
matically to prevent the battery from dis-  
charging.  
The warning lights can be checked  
before the engine is started. If you leave  
the engine start/stop button in the ON  
position for more than one hour, the bat-  
tery power will turn off automatically to  
prevent the battery from discharging.  
5 7  
Driving your vehicle  
START/RUN  
NOTICE  
WARNING  
If you press the engine start/stop button  
without depressing the clutch pedal for  
manual transaxle vehicles or without  
depressing the brake pedal for automat-  
ic transaxle vehicles, the engine will not  
start and the engine start/stop button  
changes as follow:  
• NEVER  
press  
the  
engine  
start/stop button while the vehi-  
cle is in motion except in an  
emergency. This will result in the  
engine turning off and loss of  
power assist for the steering and  
brake systems. This may lead to  
loss of directional control and  
braking function, which could  
cause an accident.  
With manual transaxle  
To start the engine, depress the clutch  
and brake pedals and press the engine  
start/stop button with the shift lever in  
neutral.  
OFF ACC ON OFF or ACC  
• Before leaving the driver's seat,  
always make sure the shift lever  
is in the P (Park) position, set the  
parking brake, press the engine  
start/stop button to the OFF posi-  
tion, and take the smart key with  
you. Unexpected vehicle move-  
ment may occur if these precau-  
tions are not followed.  
With automatic transaxle  
To start the engine, depress the brake  
pedal and press the engine start/stop  
button with the shift lever in the P (Park)  
or the N (Neutral) position. For your safe-  
ty, start the engine with the shift lever in  
the P (Park) position.  
• NEVER reach through the steer-  
ing wheel for the engine  
start/stop button, or any other  
control, while the vehicle is in  
motion. The presence of your  
hand or arm in this area may  
cause a loss of vehicle control  
resulting in an accident.  
5 8  
Driving your vehicle  
1.Carry the smart key or leave it inside  
the vehicle.  
2.Make sure the parking brake is firmly  
applied.  
3.Manual Transaxle - Depress the  
clutch pedal fully and shift the  
transaxle into Neutral. Keep the clutch  
pedal and brake pedal depressed  
while starting the engine.  
Starting the engine  
WARNING  
Always wear appropriate shoes  
when operating your vehicle.  
Unsuitable shoes (high heels, ski  
boots,etc.) may interfere with your  
ability to use the brake and acceler-  
ator pedals.  
NOTICE  
• The engine will start by pressing the  
engine start/stop button, only when  
the smart key is in the vehicle.  
• Even if the smart key is in the vehicle,  
if it is far away from the driver, the  
engine may not start.  
• When the Engine Start/Stop button is  
in the ACC or ON position, if any door  
is open, the system checks for the  
smart key. If the smart key is not in  
the vehicle, the indicator "KEY OUT"  
will blink, and if all doors are closed,  
the chime will also sound for about 5  
seconds. The indicator will turn off  
while the vehicle is moving. Keep the  
smart key in the vehicle when using  
the ACC position or if the vehicle  
engine is ON.  
Automatic Transaxle - Place the  
transaxle shift lever in P (Park).  
Depress the brake pedal fully.  
You can also start the engine when  
the shift lever is in the N (Neutral)  
position.  
4.Press the engine start/stop button.  
NOTICE  
• Whether the engine is cold or warm,  
always start the vehicle with your foot  
on the brake pedal. Do not depress the  
accelerator while starting the vehicle.  
Do not race the engine while warming  
it up.  
• In extremely cold weather (below  
- 18°C / 0°F) or after the vehicle has  
not been operated for several days, let  
the engine warm up without depress-  
ing the accelerator pedal.  
5 9  
Driving your vehicle  
Left-hand drive  
NOTICE  
CAUTION  
To prevent damage to the vehicle:  
If the engine stalls while the vehicle  
is in motion, do not attempt to move  
the shift lever to the P (Park) posi-  
tion. If the traffic and road condi-  
tions permit, you may put the shift  
lever in the N (Neutral) position  
while the vehicle is still moving and  
press the engine start/stop button  
in an attempt to restart the engine.  
Do not press the Engine Start/Stop but-  
ton for more than 10 seconds except  
when the stop lamp fuse is disconnected.  
When the stop lamp fuse is blown, you  
can't start the engine normally. Replace  
the fuse with a new one. If you are not  
able to replace the fuse, you can start the  
engine by pressing the engine start/stop  
button for 10 seconds with the engine  
start/stop button in the ACC position.  
For your safety always depress the  
brake and/or clutch pedal before start-  
ing the engine.  
OBA053002  
Right-hand drive  
OBA053002IN  
NOTICE  
If the smart key battery is weak or the  
smart key does not work correctly, you  
can start the engine by pressing the  
engine start/stop button with the smart  
key in the direction of the picture above.  
5 10