Get Instrument cluster -> Instrument cluster Guide for Hyundai I10 4 Door Third Generation (2020-2026)

Instrument cluster

INSTRUMENT CLUSTER

OAC3049001R

1. Tachometer

2. Speedometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. Warning and indicator lights

6. LCD display (including Trip computer)

The actual cluster in the vehicle may differ from the illustration.

For more details, refer to the “Gauges and Meters” in this chapter.

4-2

04

Tachometer

Instrument cluster control

WARNING

Never adjust the instrument clus-

ter whilst driving. This could result

in loss of control and lead to an

accident that may cause death,

serious injury, or vehicle damage.

Gauges and meters

Speedometer

OAC3049004TU

The tachometer indicates the approx-

imate number of engine revolutions

per minute (rpm).

MPH, km/h

Use the tachometer to select the cor-

rect shift points and to prevent lug-

ging and/or over-revving the engine.

NOTICE

Do not operate the engine within

the tachometer’s RED ZONE. This

may cause severe engine damage.

OAC3049003TU

The speedometer indicates the speed

of the vehicle and is calibrated in

miles per hour (MPH).

4-3

Instrument cluster

Engine Coolant Temperature

Gauge

Fuel Gauge

OAC3049005R

OJS048104L

This gauge indicates the approximate

amount of fuel remaining in the fuel

tank.

This gauge indicates the temperature

of the engine coolant when the igni-

tion switch is in the ON position.

Information

i

NOTICE

7he fuel tank capacity is given in

chapter 2.

If the gauge pointer moves beyond

the normal range area toward the

“130” position, it indicates over-

heating that may damage the

engine.

7he fuel gauge is supplemented by a

low fuel warning light, which will

illuminate when the fuel tank is

nearly empty.

Do not continue driving with an

overheated engine. If your vehicle

overheats, refer to “If the Engine

Overheats” in chapter 7.

2n inclines or curves, the fuel gauge

pointer may fluctuate or the low fuel

warning light may come on earlier

than usual due to the movement of

fuel in the tank.

WARNING

Never remove the radiator cap or

reservoir cap when the engine is

hot. The engine coolant is under

pressure and could cause severe

burns. Wait until the engine is cool

before adding coolant to the reser-

voir.

4-4

04

WARNING

Running out of fuel can expose

vehicle occupants to danger.

You must stop and obtain addi-

tional fuel as soon as possible

after the warning light comes on or

when the gauge indicator comes

close to the “0” level.

OTM048112

NOTICE

- User Settings mode in the Cluster :

You can change the temperature

unit in the “User Settings ꢀ Other

Features ꢀ Temperature unit” .

- Automatic climate control system :

Whilst pressing the OFF button,

press the AUTO button for 3 sec-

onds or more.

Avoid driving with an extremely

low fuel level. Running out of fuel

could cause the engine to misfire

damaging the catalytic converter.

Outside Temperature Gauge

This gauge indicates the current out-

side air temperatures either in Celsius

(°C) or Fahrenheit.

The temperature unit of the instru-

ment cluster and climate control sys-

tem will change at once.

- Temperature range :

-40°C ~ 60°C (-40°F ~ 140°F)

The outside temperature on the display

may not immediately change like a

general thermometer not to distract the

driver.

The temperature unit (from °C to °F or

from °F to °C) can be changed by:

4-5

Instrument cluster

Odometer

Information

i

If the vehicle is not on level ground

or the battery power has been inter-

rupted, the distance to empty func-

tion may not operate correctly.

7he distance to empty may differ

from the actual driving distance as it

is an estimate of the available driving

distance.

7he trip computer may not register

additional fuel if less than 1.6 gallons

(6 liters) of fuel are added to the

vehicle.

7he distance to empty may vary sig-

nificantly based on driving condi-

tions, driving habits, and condition

of the vehicle.

OPDE046141R

The odometer indicates the total dis-

tance that the vehicle has been driv-

en and should be used to determine

when periodic maintenance should

be performed.

Distance to empty

OOS048469N

ꢀ The distance to empty is the esti-

mated distance the vehicle can be

driven with the remaining fuel.

ꢀ If the estimated distance is below 1

mi. (1 km), the trip computer will

display “---” as distance to empty.

4-6

04

Transmission shift indicator

(if equipped)

Automated manual transmission

Shift Indicator (if equipped)

OIK047141

Shift Indicator Pop-up

The pop-up that indicates the current

gear position is displayed in the clus-

ter for about 2 seconds when shifting

into other positions (R/N/D).

OTL045132

This indicator displays whichAutoma-

ted Manual Transmission shift lever is

selected.

The shift indicator pop-up function

can be activated or deactivated from

the User Settings mode in the cluster

LCD display.

ꢀ 5HYHUVHꢀꢁꢀ5

ꢀ 1HXWUDOꢀꢁꢀ1

ꢀ 'ULYHꢀ0RGHꢀꢁꢀ'ꢂꢃꢀ'ꢄꢃꢀ'ꢅꢃꢀ'ꢆꢃꢀ'ꢇ

ꢀ 0DQXDOꢀ0RGHꢀꢁꢀꢂꢃꢀꢄꢃꢀꢅꢃꢀꢆꢃꢀꢇ

4-7

Instrument cluster

Manual Transmission Shift

Indicator (if equipped)

Warning and indicator lights

Information

i

0ake sure that all warning lights are

2FF after starting the engine. If any

light is still 21, this indicates a situa-

tion that needs attention.

Air bag Warning Light

OPDE046142

This indicator informs which gear is

desired whilst driving to save fuel.

7his warning light illuminatesꢀ

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

ꢀ 6KLIWLQJꢀXSꢀꢁꢀS2, S3, S4, S5

ꢀ 6KLIWLQJꢀGRZQꢀꢁꢀT1, T2, T3, T4

- It illuminates for approximately 6

seconds and then goes off.

For example

: Indicates that shifting up to the

3rd gear is desired (currently

the shift lever is in the 2nd or 1st

gear).

ꢀ When there is a malfunction with

the SRS.

ꢀ In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

: Indicates that shifting down to

the 3rd gear is desired (current-

ly the shift lever is in the 4th, 5th

gear).

Seat Belt Warning

Light

This warning light informs the driver

and front passenger that the seat belt

is not fastened.

For more details, refer to the “Seat

Belts” in chapter 3.

4-8

04

'ual-diagonal braking system

Parking Brake & Brake

Fluid Warning Light

Your vehicle is equipped with dual-di-

agonal braking systems. This means

you still have braking on two wheels

even if one of the dual systems should

fail.

7his warning light illuminatesꢀ

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

With only one of the dual systems

working, more than normal pedal

travel and greater pedal pressure are

required to stop the vehicle.

- It illuminates for approximately 3

seconds

Also, the vehicle will not stop in as

short a distance with only a portion of

the brake system working.

- It remains on if the parking brake

is applied.

ꢀ When the parking brake is applied.

If the brakes fail whilst you are driv-

ing, shift to a lower gear for additional

engine braking and stop the vehicle

as soon as it is safe to do so.

ꢀ When the brake fluid level in the

reservoir is low.

- If the warning light illuminates

with the parking brake released, it

indicates the brake fluid level in

the reservoir is low.

WARNING

Parking Brake & Brake Fluid

Warning Light

If the brake fluid level in the reser-

voir is lowꢀ

Driving the vehicle with a warning

light ON is dangerous. If the

1. Drive carefully to the nearest safe

location and stop your vehicle.

Parking Brake

&

Brake Fluid

Warning Light illuminates with the

parking brake released, it indicates

that the brake fluid level is low.

2. With the engine stopped, check

the brake fluid level immediately

and add fluid as required (For

more details, refer to “Brake

Fluid” in chapter 8). After adding

brake fluid, check all brake compo-

nents for fluid leaks. If a brake fluid

leak is found, or if the warning light

remains on, or if the brakes do not

operate properly, do not drive the

vehicle. We recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

In this case, we recommend that

you have the vehicle inspected by

a HYUNDAI authorised repairer.

4-9

Instrument cluster

Anti-lock Brake

System (ABS) Warning

Light

WARNING

Electronic Brake Force

Distribution (EBD) System

Warning Light

7his warning light illuminatesꢀ

When both ABS and Parking Brake

& Brake Fluid Warning Lights are

on, the brake system will not work

normally and you may experience

an unexpected and dangerous sit-

uation during sudden braking.

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

ꢀ When there is a malfunction with

the ABS (The normal braking sys-

tem will still be operational without

the assistance of the anti-lock brake

system).

In this case, avoid high speed driv-

ing and abrupt braking.

We recommend you have the vehi-

cle inspected by a HYUNDAI autho-

rised repairer as soon as possible.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

Information

i

- Electronic Brake Force

Distribution (EBD) System

Warning Light

Electronic Brake Force

Distribution (EBD)

System Warning Light

When the ABS Warning Light is on or

both ABS and Parking Brake Brake

Fluid Warning Lights are on, the

speedometer, odometer, or tripmeter

may not work. Also, the (PS Warning

Light may illuminate and the steering

effort may increase or decrease.

In this case, we recommend you have

the vehicle inspected by a +<81'AI

authorised repairer as soon as possible.

7hese two warning lights illuminate

at the same time whilst drivingꢀ

ꢀ When the ABS and regular brake

system may not work normally.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

4-10

04

Electric Power

Steering (EPS)

Warning Light

Malfunction Indicator

Lamp (MIL)

7his warning light illuminatesꢀ

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

- It illuminates for approximately 3

seconds and then goes off.

ꢀ When there is a malfunction with

the EPS.

ꢀ When there is a malfunction with

the emission control system.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

NOTICE

Driving with the Malfunction

Indicator Lamp (MIL) on may cause

damage to the emission control

system which could affect drivabil-

ity and/or fuel economy.

CAUTION

If the Malfunction Indicator Lamp

(MIL) illuminates, potential catalyt-

ic converter damage is possible

which could result in loss of engine

power.

In this case, we recommend that

you have the vehicle inspected by

a HYUNDAI authorised repairer as

soon as possible.

4-11

Instrument cluster

Charging System

Warning Light

Engine Oil Pressure

Warning Light

7his warning light illuminatesꢀ

ꢀ When the engine oil pressure is

low.

ꢀ When there is a malfunction with

either the alternator or electrical

charging system.

If the engine oil pressure is lowꢀ

1. Drive carefully to the nearest safe

location and stop your vehicle.

If there is a malfunction with either

the alternator or electrical charging

systemꢀ

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

engine oil level (For more details,

refer to “Engine Oil” in chapter

8). If the level is low, add oil as

required.

2. Turn the engine off and check the

alternator drive belt for looseness

or breakage.

If the warning light remains on after

adding oil or if oil is not available,

we recommend that you have the

vehicle inspected by a HYUNDAI

authorised repairer as soon as

possible.

If the belt is adjusted properly,

there may be a problem in the

electrical charging system.

In this case, we recommend that

you have the vehicle inspected by

a HYUNDAI authorised repairer as

soon as possible.

4-12

04

Engine Oil Level

Warning Light (if

equipped)

NOTICE

ꢀ If the engine does not stop imme-

diately after the Engine Oil

Pressure Warning Light is illumi-

nated, severe damage could

result.

The engine oil level warning light illu-

minates when the engine oil level

should be checked.

ꢀ If the warning light stays on

whilst the engine is running, it

indicates that there may be seri-

ous engine damage or malfunc-

tion. In this case:

If the warning light comes on, check

the engine oil level as soon as possi-

ble and add engine oil as required.

Slowly pour the recommended oil lit-

tle by little into a funnel. (Oil refill

capacity : approximately 0.6 ~ 1.0 l)

1. Stop the vehicle as soon as it

is safe to do so.

Use only the specified engine oil.

(Refer to "Recommended lubricants

and capacities" in chapter 2.)

2. Turn off the engine and check

the oil level. If the oil level is

low, fill the engine oil to the

proper level.

Do not overfill the engine oil. Make

sure the oil level is not above F (Full)

mark on the dipstick.

3. Start the engine again. If the

warning light stays on after

the engine is started, turn the

engine off immediately. In this

case, we recommend that you

have the vehicle inspected by

a HYUNDAI authorised repair-

er.

Information

i

If you travel appro[imately 5ꢁ km

a1ꢁꢁ km after the engine warms up,

after adding the engine oil, the warn-

ing light will go off.

Cycle the ignition from 2FF to 21 3

times within 1ꢁ seconds, the warning

light will go off immediately.

+owever, when you turn off the

warning light without adding the

engine oil, the light will come on

again after travelling appro[imately

5ꢁ a 1ꢁꢁ km after the engine warms

up.

4-13

Instrument cluster

Master Warning Light

NOTICE

If the light comes on continuously

after adding the engine oil and

travelling approximately 50~100

km after the engine warms up, we

recommend that the system be

checked by a HYUNDAI authorised

repairer.

7his indicator light illuminatesꢀ

ꢀ When there is a malfunction in

operation in any of the following

systems:

- Forward

Assist system malfunction (if

equipped)

Collision-Avoidance

Even if this light doesn't come on

after the engine has started, the

engine oil should be checked and

supplied periodically.

- Forward Collision-Avoidance

Assist radar blocked (if equipped)

- Lamp malfunction (if equipped)

Low Fuel Level

Warning Light

- High Beam Assist malfunction (if

equipped)

- Tire Pressure Monitoring System

(TPMS) malfunction (if equipped)

7his warning light illuminatesꢀ

ꢀ When the fuel tank is nearly empty.

Add fuel as soon as possible.

To identify the details of the warning,

look at the LCD display.

NOTICE

Driving with the Low Fuel Level

warning light on or with the fuel

level below “0” can cause the

engine to misfire and damage the

catalytic converter (if equipped).

4-14

04

Low Tire Pressure

Warning Light

(if equipped)

WARNING

Safe Stopping

ꢀ The TPMS cannot alert you to

severe and sudden tyre damage

caused by external factors.

7his warning light illuminatesꢀ

ꢀ When you set the ignition switch or

Engine Start/Stop button to the ON

position.

ꢀ If you notice any vehicle instabil-

ity, immediately take your foot

off the accelerator pedal, apply

the brakes gradually with light

force, and slowly move to a safe

position off the road.

- It illuminates for approximately 3

seconds and then goes off.

ꢀ When one or more of your tyres are

significantly underinflated (The

location of the underinflated tyres

are displayed on the LCD display).

Exhaust System (GPF)

Warning Light

(Petrol Engine,

if equipped)

For more details, refer to “Tyre

Pressure Monitoring System

(TPMS)” in chapter 7.

7his warning light illuminatesꢀ

ꢀ :KHQꢀDFFXPXODWHGꢀVRRWꢀUHDFKHVꢀDꢀ

certain amount.

7his warning light remains on after

blinking for appro[imately 6ꢁ sec-

onds or repeatedly blinks on and off

at appro[imately 3 second intervalsꢀ

ꢀ When there is a malfunction with

the TPMS.

ꢀ :KHQꢀWKLVꢀZDUQLQJꢀOLJKWꢀLOOXPLQDWHVꢃꢀ

it may turn off after driving the vehi-

cle under the following condition:

- at more than 50 mph (80 km/h) for

about 30 minutes (above 3rd gear

with 1500 ~ 4000 engine rpm).

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer as

soon as possible.

If this warning light blinks in spite of

the procedure (at this time LCD warn-

ing message will be displayed), we

recommend that you have the GPF

system checked by a HYUNDAI

authorised repairer.

For more details, refer to “Tyre

Pressure Monitoring System

(TPMS)” in chapter 7.

NOTICE

If you continue to drive with the

GPF warning light blinking for a

long time, the GPF system can be

damaged and fuel consumption

can worsen.

4-15

Instrument cluster

Electronic Stability

Control (ESC)

Indicator Light

AUTO STOP Indicator

Light (if equipped)

7his indicator light illuminatesꢀ

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

ꢀ :KHQꢀ WKHꢀ HQJLQHꢀ HQWHUVꢀ WKHꢀ ,GOHꢀ

Stop mode of the ISG (Idle Stop

and Go) system.

- It illuminates for approximately 3

seconds and then goes off.

ꢀ :KHQꢀWKHꢀDXWRPDWLFꢀVWDUWLQJꢀRFFXUVꢃꢀ

the AUTO STOP indicator on the

cluster will blink for 5 seconds.

ꢀ When there is a malfunction with

the ESC system.

For more details, refer to the “ISG

(Idle Stop and Go) system” in

chapter 6.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

Information

i

7his indicator light blinksꢀ

ꢀ Whilst the ESC is operating.

When the engine automatically starts

by the IS* system, some warning

lights(ABS, (SC, (SC 2FF, (PS or

Parking brake warning light) may

turn on for a few seconds.

For more details, refer to “Elect-

ronic Stability Control (ESC)” in

chapter 6.

7his happens because of low battery

voltage. It does not mean the system

has malfunctioned.

Electronic Stability

Control (ESC) OFF

Indicator Light

7his indicator light illuminatesꢀ

ꢀ When you set the ignition switch or

the Engine Start/Stop button to the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

ꢀ When you deactivate the ESC sys-

tem by pressing the ESC OFF but-

ton.

For more details, refer to “Elect-

ronic Stability Control (ESC)” in

chapter 6.

4-16

04

Immobiliser Indicator

Light (without smart

key) (if equipped)

Immobiliser Indicator

Light (with smart key)

(if equipped)

7his indicator light illuminatesꢀ

7his indicator light illuminates for

up to 3ꢁ secondsꢀ

ꢀ When the vehicle detects the smart

key in the vehicle with the Engine

Start/Stop button in the ACC or ON

position.

ꢀ When the vehicle detects the immo-

biliser in the key with the ignition

switch in the ON position.

- At this time, you can start the

engine.

- At this time, you can start the

engine.

- The indicator light goes off after

starting the engine.

- The indicator light goes off after

starting the engine.

7his indicator light blinksꢀ

ꢀ When there is a malfunction with

the immobiliser system.

7his indicator light blinks for a few

secondsꢀ

ꢀ When the smart key is not in the

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

vehicle.

- At this time, you cannot start the

engine.

7his indicator light illuminates for 2

seconds and goes offꢀ

ꢀ If the smart key is in the vehicle and

the Engine Start/Stop button is ON,

but the vehicle cannot detect the

smart key.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

7his indicator light blinksꢀ

ꢀ When there is a malfunction with

the immobiliser system.

In this case, we recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

4-17

Instrument cluster

Turn Signal Indicator

Light

High Beam Assist

(HBA) indicator light (if

equipped)

7his indicator light blinksꢀ

ꢀ When you operate the turn signals.

7his warning light illuminatesꢀ

ꢀ When the high-beam is on with the

light switch in the AUTO light posi-

tion.

If any of the following occur, there

may be a malfunction with the turn

signal system.

ꢀ If your vehicle detects oncoming or

preceding vehicles, High Beam

Assist system will switch the high

beam to low beam automatically.

- The turn signal indicator light illumi-

nates but does not blink

For more details, refer to “High

Beam Assist (HBA)” in chapter 5.

- The turn signal indicator light blinks

rapidly

- The turn signal indicator light does

not illuminate at all

Light ON Indicator

Light

If any of these conditions occur, we

recommend that you have your vehi-

cle inspected by a HYUNDAI autho-

rised repairer.

7his indicator light illuminatesꢀ

ꢀ When the tail lights is on.

Low Beam Indicator

Light

Front Fog Indicator

Light (if equipped)

7his indicator light illuminatesꢀ

ꢀ When the headlamps are on.

7his indicator light illuminatesꢀ

When the front fog lights are on.

High Beam Indicator

Light

Rear Fog Indicator

Light (if equipped)

7his indicator light illuminatesꢀ

ꢀ When the headlamps are on and in

the high beam position.

7his indicator light illuminatesꢀ

ꢀ When the rear fog lights are on.

ꢀ When the turn signal lever is pulled

into the Flash-to-Pass position.

4-18

04

Type A

Type B

Press Brake

(for Automated Manual

Transmission)

Cruise Indicator Light

(if equipped)

7his indicator light illuminates ꢀ

ꢀ :KHQꢀFKDQJLQJꢀJHDUꢀSRVLWLRQꢀZLWKꢀ

out pressing brake pedal

ꢀ :KHQꢀ WU\LQJꢀ WRꢀ VWDUWꢀ WKHꢀ HQJLQHꢀ

without pressing brake pedal

7his indicator light illuminatesꢀ

ꢀ When the cruise control system is

enabled.

Parking Brake

Engaged

(for Automated Manual

Transmission)

For more details, refer to “Cruise

Control System” in chapter 6.

Type A

Speed Limiter

Indicator Light (if

equipped)

7his indicator light illuminates ꢀ

ꢀ :KHQꢀ HQJLQHꢀ LVꢀ WXUQHGꢀ RIIꢀ ZLWKRXWꢀ

engaging parking brake lever it illu-

minates for approx. 5 seconds then

goes off

Type B

7his indicator light illuminatesꢀ

ꢀ :KHQꢀWKHꢀVSHHGꢀOLPLWHUꢀLVꢀHQDEOHGꢈꢀ

For more details, refer to "Speed

limit control system" or "Intelligent

Speed Limit Warning (ISLW)" in

chapter 6.

4-19

Instrument cluster

LCD display messages

Key not in vehicle

(for smart key system)

This warning message is displayed if

the smart key is not in the vehicle

when you open or close door in the

ACC position or ON position. The

warning sound is heard when you

close door without a smart key in

vehicle.

Forward Collision-

Avoidance Assist sys-

tem warning light (if

equipped)

7his indicator light illuminatesꢀ

ꢀ When you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 3

seconds and then goes off.

When attempting to start the vehicle

always have the smart key with you.

ꢀ When there is a malfunction with

FCA.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

Key not detected

(for smart key system)

This warning message is displayed if

the smart key is not detected when

you press the Engine Start/Stop but-

ton.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

in chapter 6.

Press START button with key

(for smart key system)

This warning message is displayed if

you press the Engine Start/Stop but-

ton whilst the warning message “Key

not detected” is displayed.

Lane Keeping Assist

system indicator light

(if equipped)

7his indicator light illuminatesꢀ

ꢀ [Green] When the system operating

conditions are satisfied.

At this time, the immobiliser indicator

light blinks.

ꢀ [White] The system operating con-

ditions are not satisfied.

Low Key Battery

(for smart key system)

This warning message is displayed if

the battery of the smart key is dis-

charged whilst changing the Engine

Start/Stop button to the OFF position.

ꢀ [Yellow] When there is a malfunc-

tion with the lane keeping assist

system.

In this case, we recommend that

you have your vehicle inspected by

a HYUNDAI authorised repairer.

For more details, refer to “Lane

Keeping Assist (LKA)” in chapter

6.

4-20

04

Press brake pedal to start

engine (for smart key system

and Automated Manual

Transmission)

Shift to N to start engine

(for smart key system and

Automated Manual

Transmission)

This warning message is displayed if

the Engine Start/Stop button changes

to the ACC position twice by pressing

the button repeatedly without

depressing the brake pedal.

This warning message is displayed if

you try to start the engine with the

shift button not in the N (Neutral)

position.

You can start the vehicle by depress-

ing the brake pedal.

Information

i

<ou can start the engine with the shift

lever in the 1 (1eutral) position.

Press clutch pedal to start

engine (for smart key system

and Manual transmission)

This warning message is displayed if

the Engine Start/Stop button is in the

ACC position twice by pressing the

button repeatedly without depressing

the clutch pedal.

Check BRAKE SWITCH fuse (for

smart key system and

Automated manual transmis-

sion)

This warning message is displayed if

the brake switch fuse is disconnect-

ed.

Depress the clutch pedal to start the

engine.

You need to replace the fuse with a

new one. If that is not possible, you

can start the engine by pressing the

Engine Start/Stop button for 10 sec-

onds in the ACC position.

Press START button again

(for smart key system)

This message is displayed if you

were unable to start the vehicle when

the Engine Start/Stop button was

pressed.

If this occurs, attempt to start the

engine by pressing the Engine Start/

Stop button again.

If the warning message appears each

time you press the Engine Start/Stop

button, we recommend that you have

your vehicle inspected by a HYUNDAI

authorised repairer.

4-21

Instrument cluster

Door, Bonnet, Tailgate open

indicator

Turn on FUSE SWITCH

This warning message is displayed if

the fuse switch located on the fuse

box under the steering wheel is OFF.

You should turn the fuse switch on.

For more details, refer to “Fuses”

in chapter 8.

OAC3079037R

This warning is displayed indicating

which door, bonnet, or tailgate is

open.

CAUTION

Before driving the vehicle, you

should confirm that the door/ bon-

net/tailgate is fully closed. Also,

check there is no door/bonnet/tail-

gate open warning light or mes-

sage displayed on the instrument

cluster.

4-22

04

Low Tyre Pressure (if equipped)

Heated Steering Wheel turned

off (if equipped)

This message illuminates if the heat-

ed steering wheel will turn off auto-

matically approximately 30 minutes

after the heated steering wheel is

turned on.

For more details, refer to “Heated

Steering Wheel” in chapter 5.

Low fuel

This warning message is displayed if

the fuel tank is almost out of fuel.

OAC3079037R

This warning message is displayed if

the tyre pressure is low. The corre-

sponding tyre on the vehicle will be

illuminated.

When this message is displayed, the

low fuel level warning light in the clus-

ter will come on.

For more details, refer to “Tyre

Pressure Monitoring System

(TPMS)” in chapter 7.

It is recommended to look for the

nearest fueling station and refuel as

soon as possible.

4-23

Instrument cluster

Low engine oil (if equipped)

Check headlight (if equipped)

This warning message is displayed

when the engine oil level should be

checked.

This warning message is displayed if

the headlamps are not operating

properly.

If this warning message is displayed,

check the engine oil level as soon as

possible and add engine oil as

required.

In addition, if a specific lamp(turn sig-

nal lamp etc.) is not operating proper-

ly, the warning message according to

a specific lamp (turn signal lamp etc.)

is displayed. A corresponding bulb

may need to be replaced.

Slowly pour the recommended oil lit-

tle by little into a funnel. (Oil refill

capacity : approximately 0.15 ~ 0.26

gal. (0.6 ~ 1.0 l)

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

Use only the specified engine oil.

(Refer to "Recommended lubricants

and capacities" in chapter 8.)

Check brake light (if equipped)

Do not overfill the engine oil. Make

sure the oil level is not above F (Full)

mark on the dipstick.

This warning message is displayed if

the stop lamps are not operating

properly. A lamp may need to be

replaced.

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

NOTICE

If the message is displayed contin-

uously after adding the engine oil

and

travelling

approximately

50~100 km after the engine warms

up, we recommend that the system

be checked by a HYUNDAI autho-

rised repairer.

Engine has overheated

(if equipped)

This warning message is displayed

when the engine coolant temperature

is above 120°C (248°F). This means

that the engine is overheated and

may be damaged.

If your vehicle is overheated, refer

to “Overheating” in chapter 7.

4-24

04

Check HBA (High Beam Assist)

system (if equipped)

Check DAW (Driver Attention

Warning) system (if equipped)

This warning message is displayed if

there is a problem with the High Beam

Assist system. We recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

This warning message is displayed if

there is a problem with Driver

Attention Warning system. We rec-

ommend that you have the vehicle

inspected by a HYUNDAI authorised

repairer.

For more details, refer to “High

Beam Assist (HBA)” in chapter 5.

For more details, refer to “Driver

Attention Warning (DAW)” in chap-

ter 6.

Check forward safety systems

(if equipped)

Check LKA (Lane Keeping

Assist) system (if equipped)

This warning message is displayed if

there is a problem with Forward

Collision-Avoidance Assist system.

We recommend that you have the

vehicle inspected by a HYUNDAI

authorised repairer.

This warning message is displayed if

there is a problem with Lane Keeping

Assist system. We recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

in chapter 6.

For more details, refer to “Lane

Keeping Assist (LKA)” in chapter

6.

Check exhaust system

(if equipped)

This warning message illuminates if

the GPF system has a malfunction.

At this time, GPF warning light also

blinks.

In this case, we recommend that you

have the GPF system checked by a

HYUNDAI authorised repairer.

GPF : Petrol Particulate Filter

For more details, refer to "Warning

lights" in this chapter.

4-25

Instrument cluster -> Instrument cluster for Your Hyundai I10 4 Door Third Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals