Get Instrument cluster -> LCD display messages Guide for Hyundai I10 4 Door Third Generation (2020-2026)

Instrument cluster

LCD display messages

Key not in vehicle

(for smart key system)

This warning message is displayed if

the smart key is not in the vehicle

when you open or close door in the

ACC position or ON position. The

warning sound is heard when you

close door without a smart key in

vehicle.

Forward Collision-

Avoidance Assist sys-

tem warning light (if

equipped)

7his indicator light illuminatesꢀ

ꢀ When you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 3

seconds and then goes off.

When attempting to start the vehicle

always have the smart key with you.

ꢀ When there is a malfunction with

FCA.

In this case, we recommend that you

have the vehicle inspected by a

HYUNDAI authorised repairer.

Key not detected

(for smart key system)

This warning message is displayed if

the smart key is not detected when

you press the Engine Start/Stop but-

ton.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

in chapter 6.

Press START button with key

(for smart key system)

This warning message is displayed if

you press the Engine Start/Stop but-

ton whilst the warning message “Key

not detected” is displayed.

Lane Keeping Assist

system indicator light

(if equipped)

7his indicator light illuminatesꢀ

ꢀ [Green] When the system operating

conditions are satisfied.

At this time, the immobiliser indicator

light blinks.

ꢀ [White] The system operating con-

ditions are not satisfied.

Low Key Battery

(for smart key system)

This warning message is displayed if

the battery of the smart key is dis-

charged whilst changing the Engine

Start/Stop button to the OFF position.

ꢀ [Yellow] When there is a malfunc-

tion with the lane keeping assist

system.

In this case, we recommend that

you have your vehicle inspected by

a HYUNDAI authorised repairer.

For more details, refer to “Lane

Keeping Assist (LKA)” in chapter

6.

4-20

04

Press brake pedal to start

engine (for smart key system

and Automated Manual

Transmission)

Shift to N to start engine

(for smart key system and

Automated Manual

Transmission)

This warning message is displayed if

the Engine Start/Stop button changes

to the ACC position twice by pressing

the button repeatedly without

depressing the brake pedal.

This warning message is displayed if

you try to start the engine with the

shift button not in the N (Neutral)

position.

You can start the vehicle by depress-

ing the brake pedal.

Information

i

<ou can start the engine with the shift

lever in the 1 (1eutral) position.

Press clutch pedal to start

engine (for smart key system

and Manual transmission)

This warning message is displayed if

the Engine Start/Stop button is in the

ACC position twice by pressing the

button repeatedly without depressing

the clutch pedal.

Check BRAKE SWITCH fuse (for

smart key system and

Automated manual transmis-

sion)

This warning message is displayed if

the brake switch fuse is disconnect-

ed.

Depress the clutch pedal to start the

engine.

You need to replace the fuse with a

new one. If that is not possible, you

can start the engine by pressing the

Engine Start/Stop button for 10 sec-

onds in the ACC position.

Press START button again

(for smart key system)

This message is displayed if you

were unable to start the vehicle when

the Engine Start/Stop button was

pressed.

If this occurs, attempt to start the

engine by pressing the Engine Start/

Stop button again.

If the warning message appears each

time you press the Engine Start/Stop

button, we recommend that you have

your vehicle inspected by a HYUNDAI

authorised repairer.

4-21

Instrument cluster

Door, Bonnet, Tailgate open

indicator

Turn on FUSE SWITCH

This warning message is displayed if

the fuse switch located on the fuse

box under the steering wheel is OFF.

You should turn the fuse switch on.

For more details, refer to “Fuses”

in chapter 8.

OAC3079037R

This warning is displayed indicating

which door, bonnet, or tailgate is

open.

CAUTION

Before driving the vehicle, you

should confirm that the door/ bon-

net/tailgate is fully closed. Also,

check there is no door/bonnet/tail-

gate open warning light or mes-

sage displayed on the instrument

cluster.

4-22

04

Low Tyre Pressure (if equipped)

Heated Steering Wheel turned

off (if equipped)

This message illuminates if the heat-

ed steering wheel will turn off auto-

matically approximately 30 minutes

after the heated steering wheel is

turned on.

For more details, refer to “Heated

Steering Wheel” in chapter 5.

Low fuel

This warning message is displayed if

the fuel tank is almost out of fuel.

OAC3079037R

This warning message is displayed if

the tyre pressure is low. The corre-

sponding tyre on the vehicle will be

illuminated.

When this message is displayed, the

low fuel level warning light in the clus-

ter will come on.

For more details, refer to “Tyre

Pressure Monitoring System

(TPMS)” in chapter 7.

It is recommended to look for the

nearest fueling station and refuel as

soon as possible.

4-23

Instrument cluster

Low engine oil (if equipped)

Check headlight (if equipped)

This warning message is displayed

when the engine oil level should be

checked.

This warning message is displayed if

the headlamps are not operating

properly.

If this warning message is displayed,

check the engine oil level as soon as

possible and add engine oil as

required.

In addition, if a specific lamp(turn sig-

nal lamp etc.) is not operating proper-

ly, the warning message according to

a specific lamp (turn signal lamp etc.)

is displayed. A corresponding bulb

may need to be replaced.

Slowly pour the recommended oil lit-

tle by little into a funnel. (Oil refill

capacity : approximately 0.15 ~ 0.26

gal. (0.6 ~ 1.0 l)

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

Use only the specified engine oil.

(Refer to "Recommended lubricants

and capacities" in chapter 8.)

Check brake light (if equipped)

Do not overfill the engine oil. Make

sure the oil level is not above F (Full)

mark on the dipstick.

This warning message is displayed if

the stop lamps are not operating

properly. A lamp may need to be

replaced.

Make sure to replace the burned out

bulb with a new one of the same watt-

age rating.

NOTICE

If the message is displayed contin-

uously after adding the engine oil

and

travelling

approximately

50~100 km after the engine warms

up, we recommend that the system

be checked by a HYUNDAI autho-

rised repairer.

Engine has overheated

(if equipped)

This warning message is displayed

when the engine coolant temperature

is above 120°C (248°F). This means

that the engine is overheated and

may be damaged.

If your vehicle is overheated, refer

to “Overheating” in chapter 7.

4-24

04

Check HBA (High Beam Assist)

system (if equipped)

Check DAW (Driver Attention

Warning) system (if equipped)

This warning message is displayed if

there is a problem with the High Beam

Assist system. We recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

This warning message is displayed if

there is a problem with Driver

Attention Warning system. We rec-

ommend that you have the vehicle

inspected by a HYUNDAI authorised

repairer.

For more details, refer to “High

Beam Assist (HBA)” in chapter 5.

For more details, refer to “Driver

Attention Warning (DAW)” in chap-

ter 6.

Check forward safety systems

(if equipped)

Check LKA (Lane Keeping

Assist) system (if equipped)

This warning message is displayed if

there is a problem with Forward

Collision-Avoidance Assist system.

We recommend that you have the

vehicle inspected by a HYUNDAI

authorised repairer.

This warning message is displayed if

there is a problem with Lane Keeping

Assist system. We recommend that

you have the vehicle inspected by a

HYUNDAI authorised repairer.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

in chapter 6.

For more details, refer to “Lane

Keeping Assist (LKA)” in chapter

6.

Check exhaust system

(if equipped)

This warning message illuminates if

the GPF system has a malfunction.

At this time, GPF warning light also

blinks.

In this case, we recommend that you

have the GPF system checked by a

HYUNDAI authorised repairer.

GPF : Petrol Particulate Filter

For more details, refer to "Warning

lights" in this chapter.

4-25

Instrument cluster -> LCD display messages for Your Hyundai I10 4 Door Third Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals