Get What to do in an emergency -> If you have a flat tire Guide for Hyundai I20 4 Door Second Generation (2015-2020)

ꢂꢃ$#'#"'ꢄ"' %'$%'&ꢅ&ꢆꢇ&%ꢈꢉ

$ꢀꢁꢂꢃꢄꢁꢅ"ꢆ%ꢁ"ꢁꢀꢇ"!ꢁ!$ %ꢁ

Jack and tools

Removing and storing the spare

tire

WARNING

Changing a tire can be dangerous.

Follow the instructions in this sec-

tion when changing a tire to

reduce the risk of serious injury or

death.

OIB067021

OIB067020

➀ Jack

Turn the winged hold down bolt

counterclockwise to remove the

spare tire.

➁ Jack handle

➂ Wheel lug nut wrench

➃ Towing hook

Store the spare tire in the same com-

partment by turning the winged hold

down bolt clockwise.

The jack, jack handle, and wheel lug

nut wrench, towing hook are stored

in the luggage compartment under

the luggage box cover.

To prevent the spare tire and tools

from “rattling,” store them in their

proper location.

The jack is provided for emergency

tire changing only.

!ꢀꢁ

Changing tires

(Continued)

• ALWAYS place the jack on the

designated jacking positions on

the vehicle and NEVER on the

bumpers or any other part of the

vehicle for jacking support.

WARNING

A vehicle can slip or roll off of a

jack causing serious injury or

death to you or those nearby.

Take the following safety precau-

tions:

• Do not start or run the engine

while the vehicle is on the jack.

• Do not allow anyone to remain

in the vehicle while it is on the

jack.

• Do not get under a vehicle that

is supported by a jack.

OIB067022

• NEVER attempt to change a tire

in the lane of traffic. ALWAYS

move the vehicle completely off

the road on level, firm ground

away from traffic before trying to

change a tire. If you cannot find

a level, firm place off the road,

call a towing service for assis-

tance.

• Keep children away from the

road and the vehicle.

If it is hard to loosen the tire hold-

down wing bolt by hand, you can

loosen it easily using the wheel lug

nut wrench.

1. Put the wrench (1) inside of the

tire hold-down wing bolt.

ꢈ

2. Turn the tire hold-down wing bolt

counterclockwise with the wrench.

• Be sure to use the jack provided

with the vehicle.

(Continued)

!ꢀꢁꢁ

ꢂꢃ$#'#"'ꢄ"' %'$%'&ꢅ&ꢆꢇ&%ꢈꢉ

Follow these steps to change your

vehicle’s tire:

1.Park on a level, firm surface.

2.Move the shift lever into P (Park,

for Continuously Variable Transaxle

vehicle) or neutral (for Manual

Transaxle vehicle), apply the park-

ing brake, and place the ignition

switch in the LOCK/OFF position.

3.Press the hazard warning flasher

button.

OIB067005

OIB067006

4.Remove the wheel lug nut wrench,

jack, jack handle, and spare tire

from the vehicle.

6.Loosen the wheel lug nuts counter- 7.Place the jack at the designated

clockwise one turn each in the

order shown above, but do not

remove any lug nuts until the tire

has been raised off of the ground.

jacking position under the frame

closest to the tire you are chang-

ing. The jacking positions are

plates welded to the frame with two

tabs and a raised dot. Never jack

any other position or part of the

vehicle.

5.Block both the front and rear of the

tire diagonally opposite of the tire

you are changing.

!ꢀꢁꢊ

9.Loosen the lug nuts with the wheel

lug nut wrench and remove them

with your fingers. Remove the

wheel from the studs and lay it flat

on the ground out of the way.

Remove any dirt or debris from the

studs, mounting surfaces, and

wheel.

10. Install the spare tire onto the

studs of the hub.

11. Tighten the lug nuts with your fin-

gers onto the studs with the

smaller end of the lug nuts clos-

est to the wheel.

OIB067007

OIB067008

8.Insert the jack handle into the jack

and turn it clockwise, raising the

vehicle until the tire clears the

ground. Make sure the vehicle is

stable on the jack.

13. Use the wheel lug nut wrench to

tighten the lug nuts in the order

shown. Double-check each lug

nut until they are tight. After

changing tires, we recommend

that an authorized HYUNDAI

dealer tighten the lug nuts to their

proper torque as soon as possi-

ble. The wheel lug nut should be

tightened to 11~13 kgf.m (79~94

lbf.ft).

12. Lower the vehicle to the ground

by turning the jack handle coun-

terclockwise.

ꢈ

!ꢀꢁꢋ

ꢂꢃ$#'#"'ꢄ"' %'$%'&ꢅ&ꢆꢇ&%ꢈꢉ

If you have a tire gauge, check the

tire pressure (see “Tires and Wheels”

in chapter 8 for tire pressure instruc-

tions.). If the pressure is lower or

higher than recommended, drive

slowly to the nearest service station

and adjust it to the recommended

pressure. Always reinstall the valve

cap after checking or adjusting tire

pressure. If the cap is not replaced,

air may leak from the tire. If you lose

a valve cap, buy another and install it

as soon as possible. After changing

tires, secure the flat tire and return

the jack and tools to their proper stor-

age locations.

Use of compact spare tires

(if equipped)

NOTICE

Your vehicle has metric threads on

the studs and lug nuts. Make certain

during tire changing that the same

nuts that were removed are rein-

stalled. If you have to replace your

lug nuts make sure they have metric

threads to avoid damaging the studs

and ensure the wheel is properly

secured to the hub. We recommend

that you consult an authorized

HYUNDAI dealer for assistance.

Compact spare tires are designed for

emergency use only. Drive carefully

on the compact spare tire and

always follow the safety precautions.

WARNING

To prevent compact spare tire fail-

ure and loss of control possibly

resulting in an accident:

• Use the compact spare tire only

in an emergency.

If any of the equipment such as the

jack, lug nuts, studs, or other equip-

ment is damaged or in poor condi-

tion, do not attempt to change the

tire and call for assistance.

• NEVER operate your vehicle

over 80 km/h (50 mph).

i

Information

• Do not exceed the vehicle’s

maximum load rating or the load

carrying capacity shown on the

sidewall of the compact spare

tire.

Check the tire pressure as soon as pos-

sible after installing

a

spare tire.

Adjust it to the recommended pres-

sure.

• Do not use the compact spare

tire continuously. Repair or

replace the original tire as soon

as possible to avoid failure of

the compact spare tire.

!ꢀꢁꢌ

When driving with the compact spare

tire mounted to your vehicle:

NOTICE

i

Information

To prevent damaging the compact

spare tire and your vehicle:

When the original tire and wheel are

repaired and reinstalled on the vehi-

cle, the lug nut torque must be set cor-

rectly to prevent wheel vibration. The

correct lug nut tightening torque is

11~13 kgf.m (79~94 lbf.ft).

• Check the tire pressure after

installing the compact spare tire.

The compact spare tire should be

inflated to 420 kPa (60 psi).

• Drive slowly enough for the road

conditions to avoid all hazards,

such as a potholes or debris.

• Do not take this vehicle through an

automatic car wash while the com-

pact spare tire is installed.

• Avoid driving over obstacles. The

compact spare tire diameter is

smaller than the diameter of a con-

ventional tire and reduces the

ground clearance approximately

25 mm (1 inch).

• Do not use the compact spare tire

on any other vehicle because this

tire has been designed especially

for your vehicle.

• Do not use tire chains on the com-

pact spare tire. Because of the

smaller size, a tire chain will not fit

properly.

• The compact spare tire’s tread life

is shorter than a regular tire.

Inspect your compact spare tire

regularly and replace worn com-

pact spare tires with the same size

and design, mounted on the same

wheel.

ꢈ

• Do not use the compact spare tire

on any other wheels, nor should

standard tires, snow tires, wheel

covers or trim rings be used with

the compact spare wheel.

• Do not use more than one compact

spare tire at a time.

• Do not tow a trailer while the com-

pact spare tire is installed.

!ꢀꢁꢍ

ꢂꢃ$#'#"'ꢄ"' %'$%'&ꢅ&ꢆꢇ&%ꢈꢉ

1. Model Name

Jack label

2. Maximum allowable load

■ Example

• Type A

3. When using the jack, set your

parking brake.

4. When using the jack, stop the

engine.

5. Do not get under a vehicle that is

supported by a jack.

6. The designated locations under

the frame

OHYK065010

7. When supporting the vehicle, the

base plate of jack must be vertical

under the lifting point.

• Type B

8. Shift into Reverse gear on vehicles

with Manual Transaxle or move the

shift lever to the P position on

vehicles with

Variable Transaxle.

Continuously

9. The jack should be used on firm

level ground.

OHYK065011

10. Jack manufacture

11. Production date

❈ The actual Jack label in the vehicle may differ from the illustration.

For more detailed specifications, refer to the label attached to the jack.

12. Representative company and

address

!ꢀꢁꢎ

What to do in an emergency -> If you have a flat tire for Your Hyundai I20 4 Door Second Generation (2015-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals