Get Safety system -> Installing a Child Restraint System (CRS) Guide for Hyundai I20 4 Door 2021-2026

03

śꢀ Make sure the Child Restraint System

Installing a Child Restraint

System (CRS)

is firmly secured. After installing a

Child Restraint System to the vehicle,

push and pull the seat forward and

from side-to-side to verify that it is

securely attached to the seat. A Child

Restraint System secured with a seat

belt should be installed as firmly as

possible. However, some side-to- side

movement can be expected.

WARNING

Before installing your Child Restraint

System always:

Read and follow the instructions

provided by the manufacturer of the

Child Restraint System.

Failure to follow all warnings and

instructions could increase the risk of

the SERIOUS INJURY or DEATH if an

accident occurs.

When installing a Child Restraint

System, adjust the vehicle seat (up

and down, forward and rearward)

so that your child fits in the Child

Restraint System in a comfortable

manner.

śꢀ Secure the child in the Child

Restraint System. Make sure the

child is properly strapped in the Child

Restraint System according to the

Child Restraint System manufacturer’s

instructions.

WARNING

If the vehicle head restraint prevents

proper installation of a Child Restraint

System, the head restraint of the

respective seating position shall be

readjusted or entirely removed.

CAUTION

After selecting a proper Child Restraint

System and checking that the Child

Restraint System fits properly in the rear

of this vehicle, you are ready to install

the Child Restraint System according to

the manufacturer’s instruction. There are

three general steps in installing the Child

Restraint Systems properly:

A Child Restraint System in a closed

vehicle can become very hot. To

prevent burns, check the seating

surface and buckles before placing

your child in the Child Restraint

System.

śꢀ Properly secure the Child Restraint

System to the vehicle. All Child

Restraint Systems must be secured

to the vehicle with the lap belt or lap

part of a lap/shoulder belt or with

the ISOFIX top-tether and/or ISOFIX

anchorage.

3-33

Safety system

3-34

03

Position

in the vehicle

Seat Number

Seating positions

1

Front left

2

3

4

5

6

Front centre

Front right

2^ndrow left

2^ndrow centre

2^ndrow right

❈ If the vehicle head restraint prevents proper installation of a CRS, the head restraint of the

seating position shall be readjusted or entirely removed

❈ Never place a rearward facing Child Restraint System on the front passenger seat, unless the

air bag is deactivated.

Recommended CRS for Vehicle according to UN regulations

(Information for use by vehicle users and CRS manufacturers)

Mass

ECE

Name

KidFix III S Britax Römer

Junior III Graco

Manufacturer

Type of Fixation

group

Approval Number

ISOFIX and vehicle belt,

using CRS lap belt guide

Group 2

Group 3

R44/04 - E1 – 04301304

R44/04 – E11 – 03.44.165

Vehicle belt

CRS Manufacturer information

Britax : http://www.britax.com

Graco : http://www.gracobaby.com

3-35

Safety system

ISOFIX anchorage and top-tether

anchorage (ISOFIX anchorages

system) for children

The ISOFIX system holds a Child

Restraint System during driving and in

an accident. This system is designed to

make installation of the Child Restraint

System easier and reduce the possibility

of improperly installing your Child

Restraint System.

The ISOFIX system uses anchors in the

vehicle and attachments on the Child

Restraint System. The ISOFIX system

eliminates the need to use seat belts to

secure the Child Restraint System to the

rear seats.

ISOFIX anchorages are metal bars built

into the vehicle. There are two lower

anchors for each ISOFIX seating position

that will accommodate a Child Restraint

System with lower attachments.

To use the ISOFIX system in your

vehicle, you must have a Child Restraint

System with ISOFIX attachments. (An

ISOFIX Child Restraint System may only

be installed if it has vehicle-specific or

universal approval in accordance with

the requirements of ECE-R44 or ECE-

R129.)

OBC3030014R

ISOFIX anchorages have been provided

in the left and right outboard rear

seating positions. Their locations are

shown in the illustration. There are no

ISOFIX anchorages provided for the

centre rear seating position.

WARNING

Do not attempt to install a Child

Restraint System using ISOFIX

anchorages in the rear centre

seating position. There are no ISOFIX

anchorages provided for this seat.

Using the outboard seat anchorages,

for the CRS installation on the rear

centre seating position, can damage

the anchorages.

The Child Restraint System manufacturer

will provide you with instructions on how

to use the Child Restraint System with its

attachments for the ISOFIX anchorages.

3-36

03

Securing a Child Restraint System

with the “ISOFIX Anchorage

System”

To install a ISOFIX-compatible Child

Restraint System in either of the rear

outboard seating positions:

1. Move the seat belt buckle away from

the ISOFIX anchorages.

2. Move any other objects away from

the anchors that could prevent a

secure connection between the Child

Restraint System and the ISOFIX

anchorages.

OBC3030015

3. Place the Child Restraint System on

the vehicle seat, then attach the seat

to the ISOFIX anchorages according to

the instructions provided by the Child

Restraint System manufacturer.

4.Follow the instructions of the Child

Restraint System’s manufacturer for

proper installation and connection

of the ISOFIX attachments on the

Child Restraint System to the ISOFIX

anchorages.

OBC3030016

[A] : ISOFIX Anchorage Position Indicator,

[B] : ISOFIX Anchorage

The ISOFIX anchorages symbols are

located on the left and right rear seat

cushions to identify the position of

the ISOFIX anchorages in your vehicle

(see arrows in illustration). Both rear

outboard seats are equipped with a

pair of ISOFIX anchorages as well as a

corresponding top-tether anchorage on

the back side of the rear seats.

(Child Restraint Systems with universal

approval according to ECE-R44 or ECE-

R129 need to be fixed additionally with a

top-tether connected to the back side of

the rear seats.)

ISOFIX anchorages are located the seat

cushion of the rear seat left and right

outboard seating positions.

To use the ISOFIX anchorages, open the

zipper if equipped.

3-37

Safety system

Securing a Child Restraint System

seat with “Top-tether Anchorage”

system

WARNING

Take the following precautions when

using the ISOFIX system:

śꢀ Read and follow all installation

instructions provided with your Child

Restraint System.

śꢀ To prevent the child from reaching

and taking hold of unretracted

seat belts, buckle all unused rear

seat belts and retract the seat belt

webbing behind the child. Children

can be strangled if a shoulder belt

becomes wrapped around their neck

and the seat belt tightens.

śꢀ NEVER attach more than one

Child Restraint System to a single

anchorage. This could cause the

anchor or attachment to come loose

or break.

OBC3030017

Top-tether anchorages for Child

Restraint Systems are located on the

rear of the seatback.

śꢀ Always have the ISOFIX system

inspected by your dealer after an

accident. An accident can damage

the ISOFIX system and may not

properly secure the Child Restraint

System.

OBC3030018

1. Route the Child Restraint System seat

strap over the seatback.

For vehicles with adjustable head

restraint, route the tether strap under

the head restraint and between the

head restraint posts, otherwise route

the tether strap over the top of the

seatback.

2. Connect the top-tether to the top-

tether anchorage, then tighten

the top-tether according to the

instructions of your Child Restraint

System’s manufacturer to firmly

attach the Child Restraint System to

the seat.

3-38

03

Securing a Child Restraint System

with a lap/shoulder belt

WARNING

Take the following precautions when

installing the top-tether:

śꢀ Read and follow all installation

instructions provided with your Child

Restraint System.

When not using the ISOFIX system, all

Child Restraint Systems must be secured

to a rear seat with the lap part of a lap/

shoulder belt.

śꢀ NEVER attach more than one Child

Restraint System to a single ISOFIX

top-tether anchorage. This could

cause the anchorage or attachment

to come loose or break.

śꢀ Do not attach the top-tether to

anything other than the correct top-

tether anchorage. It may not work

properly if attached to something

else.

śꢀ Child Restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

Child Restraint System.

Under no circumstances are they

to be used for adult seat belts or

harnesses or for attaching other

items or equipment to the vehicle.

OHI038145

Installing a Child Restraint System

with a lap/shoulder belt

To install a Child Restraint System on the

rear seats, do the following:

1. Place the Child Restraint System on a

rear seat and route the lap/ shoulder

belt around or through the restraint,

following the restraint manufacturer’s

instructions. Make sure the seat belt

webbing is not twisted.

Information

i

When using the rear centre seat belt, you

should also refer to the “Rear Centre Seat

Belt” in this chapter.

3-39

Safety system

OHI038146

OHI038183L

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the distinct

“click” sound.

3. Remove as much slack from the

belt as possible by pushing down

on the Child Restraint System whilst

feeding the shoulder belt back into the

retractor.

Information

i

4.Push and pull on the Child Restraint

System to confirm that the seat belt is

holding it firmly in place.

Position the release button so that it is

easy to access in case of an emergency.

If your CRS manufacturer instructs

or recommends you use a top-tether

anchorage with the lap/shoulder belt,

see page 3-36.

To remove the Child Restraint System,

press the release button on the buckle

and then pull the lap/shoulder belt out

of the Child Restraint System and allow

the seat belt to retract fully.

3-40

Safety system -> Installing a Child Restraint System (CRS) for Your Hyundai I20 4 Door 2021-2026

Related Topics

Safety system

Popular Owner Manuals

Latest Owner Manuals