Get Foreword / Electric vehicle system overview -> EV mode Guide for Hyundai Ioniq SUV First Generation (2021-2026)

01

EV MODE

If you select the “EV” menu at the home

screen you can enter EV mode.

For detailed information, refer to the

separately supplied infotainment

system manual.

ONE1Q011052L

EV mode screen

ONE1Q011073L

1. Solar Roof Info

2. Energy Information

3. Next Departure

5. Vehicle to Load (V2L)

6. Nearby Stations

7. EV Settings

4. Charging and Climate

8. Menu

1-9

Foreword / Electric vehicle system overview

Solar roof information

Energy information

ONE1Q011014L

ONE1Q011006L

6HOHFWꢀœ(9ꢀƟꢀ9HKLFOHꢀLPDJHŔꢀRQꢀWKHꢀ

screen.

You can check battery information and

energy consumption.

Battery information

ONE1Q011015L

6HOHFWꢀœ(9ꢀƟꢀ6RODUꢀ5RRIꢀ,QIRŔꢀRQꢀWKHꢀ

screen.

You can check the charged battery

capacity by the solar roof.

For details of solar roof, refer to “Solar

Roof” in chapter 5.

ONE1Q011001L

You can check the reachable range, total

battery power remaining, and expected

charging time for each charge type.

śꢀ The distance to empty is calculated

based on the real-time electric energy

efficiency whilst driving. The distance

may change if the driving pattern

changes.

śꢀ The distance to empty may vary

according to the change of the driving

pattern even if the same target battery

charge level is set.

1-10

01

Departure time

Next departure

ONE1Q011017L

ONE1Q011016L

6HOHFWꢀœ(9ꢀƟꢀ1H[Wꢀ'HSDUWXUHŔꢀRQꢀWKHꢀ

screen. You can set the date and time

of when to charge the battery, climate

control temperature, and other various

functions.

ONE1Q011053L

1. Set anticipated departure time for

scheduled charging and target

temperature.

2. Select the day of the week to activate

scheduled charging and target

temperature for departure time.

1-11

Foreword / Electric vehicle system overview

Off-peak time settings

Charging and climate

ONE1Q012055L

ONE1Q011019L

1. If selected, starts charging only on

the designated off-peak time. If

deselected, starts charging only on

the scheduled time.

2. Set the most inexpensive time to

complete charging.

6HOHFWꢀœ(9ꢀƟꢀ&KDUJLQJꢀDQGꢀ&OLPDWHŔꢀRQꢀ

the screen.

Information

Vehicle must be connected with the

charging connector at the time pre-

scheduled time for the scheduled charging.

- Off-peak tariffs prioritized: If

selected, starts charging at off-peak

time(may keep on charging pass

off-peak time to charge 100%).

- Charge only during Off-peak: If

selected, charges only within off-

peak time(may not charge 100%).

ONE1Q011054L

You can set the date and time of when

to charge the battery and the climate

control temperature. Also, you may

select the time to start charging using

the off-peak time setting.

1-12

01

Target temperature settings

Vehicle to load (V2L)

V2L is the system that provides AC

power(230 V/50 Hz) to the inside and

outside of vehicle using the high voltage

battery for driving to operate several

electronical products.

ONE1Q011021L

1. Set target temperature.

- If the target temperature (1) is set

with the cable connected, the cabin

temperature will be adjusted to the

target temperature at departure

time (without loss of high voltage

battery charging level). In cold

weather, preschedule heating

helps enhance electric vehicle

performance by heating the vehicle

in advance.

ONE1Q011022L

6HOHFWꢀœ(9ꢀƟꢀ9HKLFOHꢀWRꢀ/RDGꢀꢁ9ꢂ/ꢃŔꢀRQꢀWKHꢀ

screen.

You can set the battery discharging limit

for high voltage battery for driving.

ONE1Q011023L

If the vehicle reaches to the limit, it

automatically cut supply of electricity.

1-13

Foreword / Electric vehicle system overview

-

If the warning message for V2L

appears on the cluster, refer to the

message entirely.

If V2L does not operate previously

when you connects another home

appliances, we recommend that

you have your vehicle inspected by

an authorised HYUNDAI dealer.

Energy information

6HOHFWꢀœ(9ꢀƟꢀ9HKLFOHꢀLPDJHŔꢀRQꢀWKHꢀ

screen.

You can check battery discharging level.

How to connect

Outdoor

5. Press the switch (1) to turn off the light

(2) the the V2L will be off. You can

disconnect the V2 connector when

the light (2) turns off or the charging

connecter lock is deactivated pressing

the door unlock button on the smart

key.

Information

Please connect the V2L connector to the

charging inlet within 60 seconds after the

charging cover opens. To prevent theft

after connecting, it is changed to auto lock

automatically so that it is impossible to

disconnect.

ONE1Q011063L

1. Open the cover of the V2L connector.

2. Close the cover after connecting

home appliances and electronical

products to the power outlet.

3. Connect the V2L connector to the

charging inlet on the vehicle.

4. Press the switch (1) of the V2L

connector and check whether the

light (2) is on or off. The light (2) may

not turn on normally when:

When using V2L, cancel the scheduled air

conditioning setting. V2L operation may

be blocked by scheduled air conditioning

operation conditions.

Indoor

-

See the battery discharging limit

for high voltage battery for driving

in ‘Electricity Use’ menu on the

screen. If it is higher than the

current amounts of high voltage

battery, the light (2) does not turn

on.

-

Check whether the light of V2L

connector or indoor power outlet

turns on or not.

ONE1051084

1-14

01

1. Connect to the power outlet located

in bottom of the rear seat with the

Vehicle Stop/Start button in the ON

position.

Information

śꢀ V2L discharging mode will shut off if

the vehicle is off using indoor V2L on

the vehicle state of ON.

śꢀ Opening the charging door or

connecting the V2L connector to the

charging inlet, the V2L discharging

mode will shut off. If you want to

use the indoor and outdoor V2L

simultaneously, firstly connect the V2L

connector to the charging inlet and use

the indoor V2L.

CAUTION

ONE1Q011089

śꢀ Be well-informed of the manual to

2. Use the smart key to unlock the power

outlet cover.

prevent accidents.

śꢀ The V2L discharging mode is

blocked automatically in case of

overheating. (When the discharging

mode is blocked, check whether

the V2L connector or power plug

is contaminated, worn, corroded

or broken or the home appliance

capacity is over 16 A. If the

temperature falls to proper level

after it is left unsupervised, you

can use it again. Use proper home

appliances.)

ONE1Q011090

śꢀ Do not remodel or disassemble

the provided V2L connector. The

failure caused by remodeling or

disassembling is not covered by the

warranty.

3. Check the operation status through

the front indicator of the power outlet.

- Blue: Standby

- Red: No power supply even the

power outlet is connected

- Green: Normal power supply

through the normal connection of

the power outlet.

śꢀ Do not drop the V2L connector or

give a strong impact to it.

śꢀ Do not place objects on the V2L

connector.

śꢀ Be sure to disconnect the V2L

connector from the vehicle when you

are finished using V2L.

1-15

Foreword / Electric vehicle system overview

śꢀ When the high voltage battery

charge reaches the set discharging

limit(%), the operation stops, and

a warning message is displayed on

the instrument panel. If you want

V2L operation, set the discharging

limit(%) lower than the current

battery charge.

śꢀ When using various electric

products, use them below the

maximum power capacity that can

be supplied by the vehicle.

śꢀ If you use an electrical appliance

that exceeds the maximum power

capacity that the vehicle can supply,

the operation will stop and a warning

message will be displayed on the

instrument panel. Make sure the

total power consumption of the

electrical appliance you use exceeds

the V2L maximum power capacity.

śꢀ Some of the electric products may

not operate normally even if the

product has power consumption less

than the maximum power capacity

provided by the vehicle.

śꢀ Use a power plug with ground

connection.

śꢀ Do not use high power home

appliances such as air conditioning,

washing machine or dryer.

śꢀ Do not hang the home appliances on

to the wire.

śꢀ For various devices connected to

an power outlet, use only products

that have obtained national

safety certification. For usage and

precautions, refer to the manual of

the device. (Electrical appliances,

multi-outlets, cord extension cables,

etc.)

śꢀ For devices used outdoors in

a vehicle, use a product with a

waterproof function or use it in a

waterproof environment. Do not use

in environments with rain or high

humidity. (Electrical appliances,

multi-outlets, cord extension cables,

etc.)

śꢀ If there is a risk of lightning, do not

use the V2L function outside the

vehicle.

- Electrical products that require

high power during initial

operation.

- Measuring devices that need to

process accurate data.

- Electric products sensitive to

inverter type AC power supply

(Inverter: A device that converts

DC power into AC power)

śꢀ Do not connect multiple portable

multi-outlets.

śꢀ When using an extension cable, if

the cable is twisted or overlapped by

itself may cause a fire. Be sure to use

the cable without twisting it.

śꢀ When using the vehicle’s outdoor

V2L connector, power is also

supplied to the vehicle’s indoor

power outlet. Unplug electrical

appliances that are not in use from

the indoor power outlet.

śꢀ When using the V2L, the cooling fan

in the vehicle motor compartment

can operate automatically even if the

vehicle is turned off. Do not put your

hand near the cooling fan in the V2L

operating state.

śꢀ Do not use products that require

a continuous power supply,

such as medical equipment. The

power supply may be interrupted

depending on the vehicle’s

condition.

śꢀ Only use home appliances under 16

ampere.

śꢀ Put the power plug fully and use

the qualified plug that meets the

standard. If you use worn, corroded

or broken plug or improper plug, it

might be a cause of malfunction.

1-16

01

LCD display messages

WARNING

śꢀ Do not touch the V2L connector of

the terminal of the vehicle charging

inlet.

śꢀ Do not put metal objects to the V2L

connector or charging inlet. It might

be a cause of electric shock.

śꢀ Do not touch the V2L connector,

charging inlet or power plug with

a wet hand. It might be a cause of

electric shock. Please handle with a

dry hand all the time.

ONE1Q011077L

śꢀ Confirm whether there is foreign

substance such as water or dust on

the V2L connector, charging inlet or

power plug before connecting. If you

connect it with foreign substances,

it may be a cause of fire or electric

shock.

śꢀ Do not remodel or disassemble the

V2L connector. There is a risk of fire,

electric shock or injury.

V2L has ended. Battery level has reached

the set value

When the high voltage battery level

reaches the discharging limit set level,

the V2L will stop and the warning will

be displayed. If you want to use the V2L

continuously, make the discharging limit

set level lower than the present battery

level.

śꢀ When the power plug is connected or

disconnected to the V2L connector

or open or close the connector

cover of the V2L, be careful not to be

scratched on the hand.

śꢀ Do not charge in the following

conditions. The accident might

occur.

- The V2L connector, charging inlet,

power plug or cable is damaged,

corroded or rusted.

ONE1Q011078L

- The connection part is loose.

V2L stopped due to excessive power use

- Electric products sensitive to

inverter type AC power supply

(Inverter: A device that converts

DC power into AC power)

If you use an electrical appliance that

exceeds the maximum power output the

vehicle can supply, it will stop working

and display a warning message. Make

sure that the total power consumption of

your electrical appliance exceeds the V2L

maximum power output.

śꢀ Do not use if the sheath of home

appliance cables is damaged or

broken. There is a risk of fire, electric

shock or injury.

śꢀ Never use an electric heating

appliance like iron, coffee pot, and

toaster in the vehicle. It may cause a

fire and injury.

1-17

Foreword / Electric vehicle system overview

Nearby charging stations

ONE1Q011079L

V2L conditions not met

ONE1Q011024L

If V2L is interrupted for any of the

following reasons, a warning message is

displayed.

6HOHFWꢀœ(9ꢀƟꢀ0DSŔꢀRQꢀWKHꢀVFUHHQꢄꢀ6WDWLRQVꢀ

around the current location are searched.

śꢀ V2L connector switch off

śꢀ V2L connector overheating

śꢀ Opening the charging door whilst

using the V2L indoor outlet

Make sure there are no problems with

the V2L connector and the vehicle indoor

outlet.

ONE1Q011025L

Select ‘Search for charging stations’ on

the screen.

1-18

01

Charging limit (Max. % Charge)

ONE1Q011026L

Around the course, around the current

site, around the selected destination

or charging stations of interest will be

searched. If you choose the charging

station, the detailed information will be

provided.

ONE1Q012028L

For more detailed information, please

refer to the Separately supplied

infotainment system manual.

EV settings

ONE1Q012029L

śꢀ The target battery charge level can

be selected when charged with AC

charger or DC charger.

śꢀ The charging level can be changed by

10%.

śꢀ If the target battery charge level is

lower than the high voltage battery

charge level, the battery will not be

charged.

ONE1Q011027L

6HOHFWꢀœ(9ꢀƟꢀ(9ꢀ6HWWLQJVŔꢀRQꢀWKHꢀVFUHHQꢄꢀ

You can set the charging limit, charging

current, winter mode and utility mode

functions.

1-19

Foreword / Electric vehicle system overview

Charging current

Battery conditioning mode

ONE1Q012030L

ONE1Q012102L

śꢀ You can adjust the charging

current for an AC charger. Select an

appropriate charging current.

śꢀ If the charging process does not

start or abruptly stops in the middle,

reselect another proper current and

re-try charging the vehicle.

You can select or deselect the Battery

conditioning mode.

The Battery conditioning mode is

efficient during the winter time when the

high voltage battery temperature is low.

This mode is recommended to improve

driving and DC charging performances

during winter by raising the battery

temperature to an adequate level.

śꢀ Charging time varies depending on

which charging current is selected.

However, the driving distance may be

reduced as the energy is required to

increase battery temperature.

Also, if the battery temperature is low

during driving or when the scheduled

air conditioner/heater is activated, this

mode is operated to improve driving

performance.

However, the mode is not operated to

ensure driving distance when the battery

level is low.

Information

This mode is available for the vehicles

equipped with the battery heater.

1-20

01

System Activation

Utility Mode

When the system is activated:

The high voltage battery is used instead

of the 12V auxiliary battery for operating

the convenient features of the vehicle.

When driving is not necessary such as

whilst camping or when stopping the

vehicle for a long time, it is possible to

use the electrical devices (audio, lights,

air conditioner, heater, etc.) for long

hours.

śꢀ The (

) indicator will turn off, and

the (

) indicator will illuminate on

the cluster and the EPB is applied.

śꢀ All electric devices are usable but the

vehicle cannot be driven.

śꢀ The EPB can be cancelled by pressing

the EPB switch.

Gear cannot be shifted out of P (Park).

If a shift attempt is made, a message

“Shifting conditions not met” will be

displayed on the infotainment system

screen.

System Deactivation

The Utility mode can be deactivated by

pressing the START/STOP button to the

OFF position. The function cannot be

deactivated from the EV settings.

ONE1Q012032L

System Setting and Activation

System setting

The driver can activate the Utility mode

function when the following conditions

are satisfied.

śꢀ The vehicle is in the ready

(

) mode and the gear is shifted

to P (Park).

śꢀ The EPB (Electronic Parking Brake) is

not a malfunction.

śꢀ œ(9ꢀVHWWLQJVꢀƟꢀ8WLOLW\ꢀPRGHŔꢀLVꢀVHOHFWHGꢀ

on the infotainment system screen.

1-21

Foreword / Electric vehicle system overview -> EV mode for Your Hyundai Ioniq SUV First Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals