2021-2026 Hyundai Ioniq SUV Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance for Your Hyundai Ioniq SUV First Generation (2021-2026)

9.Maintenance  
Motor compartment......................................................................................... 9-3  
Maintenance services.......................................................................................9-4  
Owner’s responsibility ................................................................................................ 9-4  
Owner maintenance precautions............................................................................... 9-4  
Owner maintenance ......................................................................................... 9-5  
Owner maintenance schedule ................................................................................... 9-6  
Scheduled maintenance services.....................................................................9-7  
Normal maintenance schedule.................................................................................. 9-8  
Maintenance under severe usage conditions .......................................................... 9-10  
Explanation of scheduled maintenance items ...............................................9-11  
Coolant .............................................................................................................9-12  
Brake fluid ........................................................................................................9-13  
Checking the brake fluid level................................................................................... 9-13  
Reduction gear fluid ........................................................................................9-14  
Washer fluid .....................................................................................................9-14  
Checking the washer fluid level ................................................................................ 9-14  
Cabin air filter...................................................................................................9-15  
Filter inspection.......................................................................................................... 9-15  
Filter replacement...................................................................................................... 9-15  
Wiper blades ....................................................................................................9-16  
Blade inspection......................................................................................................... 9-16  
Blade replacement..................................................................................................... 9-16  
Battery (12 volt) ................................................................................................9-19  
For best battery service ............................................................................................ 9-20  
Battery capacity label ............................................................................................... 9-20  
Battery recharging .................................................................................................... 9-20  
Reset items ................................................................................................................. 9-21  
9
Tyres and wheels............................................................................................. 9-22  
Tyre care......................................................................................................................9-22  
Recommended cold tyre inflation pressures ...........................................................9-22  
Check tyre inflation pressure ....................................................................................9-23  
Tyre rotation................................................................................................................9-24  
Wheel alignment and tyre balance...........................................................................9-25  
Tyre replacement........................................................................................................9-25  
Wheel replacement....................................................................................................9-26  
Tyre traction................................................................................................................9-26  
Tyre maintenance.......................................................................................................9-26  
Tyre sidewall labelling................................................................................................9-26  
Low aspect ratio tyres................................................................................................9-29  
Fuses................................................................................................................9-30  
Instrument panel fuse replacement ......................................................................... 9-31  
Motor compartment panel fuse replacement..........................................................9-32  
Fuse/relay panel description.....................................................................................9-33  
Light bulbs.......................................................................................................9-43  
Headlamp, parking lamp, turn signal lamp, Daytime Running Light (DRL)  
replacement .............................................................................................................. 9-44  
Side repeater lamp replacement ............................................................................. 9-46  
Rear combination lamp replacement...................................................................... 9-46  
High mounted stop lamp replacement ................................................................... 9-48  
Licence plate lamp replacement.............................................................................. 9-48  
Front boot lamp replacement .................................................................................. 9-49  
Interior light replacement......................................................................................... 9-49  
Appearance care..............................................................................................9-51  
Exterior care ............................................................................................................... 9-51  
Interior care ............................................................................................................... 9-56  
9
09  
MOTOR COMPARTMENT  
The actual motor compartment in the vehicle may differ from the illustration.  
ONE1091031E  
1. Coolant reservoir  
5. Fuse box  
2. Low Conductivity Water (LCW)  
coolant reservoir  
3. Brake fluid reservoir  
6. Climate control system air filter  
7. Front boot  
8. Battery (12V)  
4. Windscreen washer fluid reservoir  
9-3  
Maintenance  
MAINTENANCE SERVICES  
You should exercise the utmost care  
to prevent damage to your vehicle and  
injury to yourself whenever performing  
any maintenance or inspection  
procedures.  
Owner maintenance precautions  
Inadequate, incomplete or insufficient  
servicing may result in operational  
problems with your vehicle that could  
lead to vehicle damage, an accident, or  
personal injury. This chapter provides  
instructions only for the maintenance  
items that are easy to perform.  
We recommend you have your  
vehicle maintained and repaired by  
an authorised HYUNDAI dealer. An  
authorised HYUNDAI dealer meets  
HYUNDAI’s high service quality  
Your vehicle should not be modified  
in any way. Such modifications may  
adversely affect the performance, safety  
or durability of your vehicle and may, in  
addition, violate conditions of the limited  
warranties covering the vehicle.  
standards and receives technical support  
from HYUNDAI in order to provide you  
with a high level of service satisfaction.  
Owner’s responsibility  
Maintenance service and record  
NOTICE  
retention are the owner’s responsibility.  
Improper owner maintenance during  
the warranty period may affect  
You should retain documents that show  
proper maintenance has been performed  
on your vehicle in accordance with  
the scheduled maintenance service  
charts shown on the following pages.  
You need this information to establish  
your compliance with the servicing  
and maintenance requirements of your  
vehicle warranties.  
warranty coverage. For details, read  
the separate Service Passport provided  
with the vehicle. If you’re unsure about  
any service or maintenance procedure,  
we recommend to have it done by an  
authorised HYUNDAI dealer.  
Detailed warranty information is  
provided in your Service Passport.  
Repairs and adjustments required as a  
result of improper maintenance or a lack  
of required maintenance are not covered.  
9-4  
09  
OWNER MAINTENANCE  
The following lists are vehicle checks and  
WARNING  
inspections that should be performed  
by the owner or an authorised HYUNDAI  
dealer at the frequencies indicated to  
help ensure safe, dependable operation  
of your vehicle.  
Performing maintenance work on a  
vehicle can be dangerous. If you lack  
sufficient knowledge and experience  
or the proper tools and equipment to  
do the work, we recommend that it is  
done by an authorised HYUNDAI dealer.  
ALWAYS follow these precautions for  
performing maintenance work:  
śꢀ Park your vehicle on level ground.  
Shift the vehicle to P (Park), apply the  
parking brake, and press the Start/  
Stop button to the OFF position.  
Any adverse conditions should be  
brought to the attention of your dealer as  
soon as possible.  
These Owner Maintenance vehicle  
checks are generally not covered by  
warranties and you may be charged for  
labour, parts and lubricants used.  
The electric control system in the vehicle  
may cause malfunction or other negative  
impact on the artificial heart and the  
artificial internal organs. Be sure to  
inquire the impact of the electric control  
system on the artificial organs from the  
medical product corporation.  
śꢀ Block the tyres (front and back) to  
prevent the vehicle from moving.  
Remove loose clothing or jewellery  
that can become entangled in  
moving parts.  
śꢀ Keep flames, sparks, or smoking  
materials away from the battery  
parts.  
WARNING  
Make sure to turn the START/STOP  
button to the ‘OFF’ position to shut  
down the vehicle before performing  
maintenance work on the vehicle.  
9-5  
Maintenance  
At least monthly:  
Owner maintenance schedule  
When you stop for charging:  
śꢀ Check coolant level in the coolant  
reservoir.  
śꢀ Check the coolant level in the coolant  
reservoir.  
śꢀ Check the operation of all exterior  
lights, including the stoplights, turn  
signals and hazard warning flashers.  
śꢀ Check the windscreen washer fluid  
level.  
śꢀ Check the inflation pressures of all  
tyres including the spare for tyres that  
are worn, show uneven wear, or are  
damaged.  
śꢀ Check for low or under-inflated tyres.  
WARNING  
śꢀ Check for loose wheel lug nuts.  
Be careful when checking your coolant  
level if the motor compartment is hot.  
This may result in coolant being blown  
out of the opening and cause serious  
burns and other injuries.  
At least twice a year: (i.e., every  
Spring and Autumn)  
śꢀ Check radiator, heater and air  
conditioning hoses for leaks or  
damage.  
Whilst operating your vehicle:  
śꢀ Check for vibrations in the steering  
wheel. Notice if there is any increased  
steering effort or looseness in the  
steering wheel, or change in its  
straight-ahead position.  
śꢀ Notice if your vehicle constantly turns  
slightly or “pulls” to one side when  
travelling on smooth, level road.  
śꢀ Check windscreen washer spray and  
wiper operation. Clean wiper blades  
with a clean cloth dampened with  
washer fluid.  
śꢀ Check headlamp alignment.  
śꢀ Check the seat belts for wear and  
function.  
śꢀ When stopping, listen and check for  
unusual sounds, pulling to one side,  
increased brake pedal travel or “hard-  
to-push” brake pedal.  
śꢀ If any slipping or changes in the  
operation of your gear shift occurs,  
check the shift gear fluid level.  
At least once a year:  
śꢀ Clean body and door drain holes.  
śꢀ Lubricate door hinges and bonnet  
hinges.  
śꢀ Lubricate door and bonnet locks and  
latches.  
śꢀ Lubricate door rubber weather strips.  
śꢀ Check the air conditioning system.  
śꢀ Check the shift gear P (Park) function.  
śꢀ Check the parking brake.  
śꢀ Inspect and lubricate shift gear  
śꢀ Check for fluid leaks under your  
vehicle (water dripping from the air  
conditioning system during or after  
use is normal).  
linkage and controls.  
śꢀ Clean the battery (12V) and terminals.  
śꢀ Check the brake fluid level.  
9-6  
09  
SCHEDULED MAINTENANCE SERVICES  
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of  
the following conditions apply. If any of the following conditions apply, you must follow  
the Maintenance Under Severe Usage Conditions.  
śꢀ Repeated driving short distance of less than 8 km in normal temperature or less  
than 16 km in freezing temperature  
śꢀ Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads  
śꢀ Driving in areas using salt or other corrosive materials or in very cold weather  
śꢀ Driving in heavy dust conditions  
śꢀ Driving in heavy traffic area  
śꢀ Driving in heavy traffic area with the ambient temperature higher than 32 ºC whilst  
consuming more than 50% of electric energy.  
śꢀ Towing a trailer or using a camper, or driving with loads on the roof  
śꢀ Driving as a patrol car, taxi, other commercial use of vehicle towing  
śꢀ Frequently driving under high speed or rapid acceleration/deceleration  
śꢀ Frequently driving in stop-and-go condition  
If your vehicle is operated under the above conditions, you should inspect, replace  
or refill more frequently than the following Normal Maintenance Schedule. After the  
periods or distance shown in the chart, continue to follow the prescribed maintenance  
intervals.  
9-7  
Maintenance  
9-8  
09  
9-9  
Maintenance  
Maintenance under severe usage conditions  
The following items must be serviced more frequently on cars mainly used under  
severe driving conditions.  
Refer to the chart below for the appropriate maintenance intervals.  
R : Replace  
I : Inspect and if necessary, adjust, correct, clean or replace  
Maintenance  
operation  
Driving  
condition  
Maintenance item  
Maintenance intervals  
R
I
Every 120,000 km  
A, B, E, F, H  
Reduction gear fluid  
Inspect more frequently  
depending on the condition  
Steering gear rack,  
linkage and boots  
C, D, E, F, G  
B, C, D, E, F  
Inspect more frequently  
depending on the condition  
Front suspension ball  
joints  
I
Inspect more frequently  
depending on the condition  
B, C, D, E, F, G,  
H, I, J  
Disc brakes and pads,  
calipers and rotors  
I
Inspect more frequently  
B, C, D, E, F, G,  
H, I  
I
Driveshaft and boots  
Cabin air filter  
depending on the condition  
Replace more frequently  
depending on the condition  
R
B,D,F  
Severe driving conditions  
A. Repeatedly driving short distance of less than 8 km in normal temperature or less  
than 16 km in freezing temperature  
B. Driving on rough, dusty, muddy, unpaved, graveled or salt spread roads  
C. Driving in areas using salt or other corrosive materials or in very cold weather  
D. Driving in heavy dust condition  
E. Driving in heavy traffic area with the ambient temperature higher than 32 ºC whilst  
consuming more than 50% of electric energy.  
F. Driving on uphill, downhill, or mountain roads repeatedly  
G. Towing a trailer, or using a camper or roof rack  
H. Driving as a patrol car, taxi, other commercial use or vehicle towing  
I. Frequently driving under high speed or rapid acceleration/deceleration  
J. Frequently driving in stop-and-go conditions  
9-10  
09  
EXPLANATION OF SCHEDULED MAINTENANCE ITEMS  
Cooling system  
Brake discs, pads, calipers and  
rotors  
Check cooling system components, such  
as radiator, coolant reservoir, hoses and  
connections for leakage and damage.  
Replace any damaged parts.  
Check the pads, the disc, and the rotor  
for any excessive wear-out. Inspect  
calipers for any fluid leakage.  
Coolant  
The coolant should be changed at the  
intervals specified in the maintenance  
schedule.  
Suspension mounting bolts  
Check the suspension connections for  
looseness or damage. Retighten to the  
specified torque.  
Reduction gear fluid  
The reduction gear fluid should be  
inspected according to the intervals  
specified in the maintenance schedule.  
Steering gear box, linkage &  
boots/lower arm ball joint  
With the vehicle stopped and the vehicle  
off, check for excessive free-play in the  
steering wheel. Check the linkage for  
bends or damage. Check the dust boots  
and ball joints for deterioration, cracks,  
or damage.  
Brake hoses and lines  
Visually check for proper installation,  
chafing, cracks, deterioration and any  
leakage. Replace any deteriorated or  
damaged parts immediately.  
Replace any damaged parts.  
Drive shafts and boots  
Brake fluid  
Check the drive shafts, boots and clamps  
for cracks, deterioration, or damage.  
Replace any damaged parts and, if  
necessary, repack the grease.  
Check the brake fluid level in the brake  
fluid reservoir. The level should be  
between the MIN and the MAX marks  
on the side of the reservoir. Use only  
hydraulic brake fluid conforming to DOT  
4 specification.  
Air conditioning refrigerant  
Check the air conditioning lines and  
connections for leakage and damage.  
9-11  
Maintenance  
COOLANT  
„ꢀStandard coolant  
WARNING  
Since specific coolant water (Blue  
colour, Low conductivity) is applied  
for electric vehicles, replenishment of  
other antifreeze or water may cause  
problems to the vehicle.  
WARNING  
The electric motor for the  
cooling fan may continue to  
operate or start up when the  
vehicle is not running and can  
cause serious injury.  
ONE1091002R  
„ꢀLow conductivity coolant  
Keep hands, clothing and tools  
away from the rotating fan  
blades of the cooling fan.  
The electric motor for the cooling  
fan is controlled by vehicle coolant  
temperature, refrigerant pressure and  
vehicle speed. As the vehicle coolant  
temperature decreases, the electric  
motor will automatically shut off. This is  
a normal condition.  
ONE1091003R  
Check the condition and connections  
of all cooling system hoses and  
heater hoses. Replace any swollen or  
deteriorated hoses.  
The coolant level should be filled  
between the MAX or F and the MIN  
or L marks on the side of the coolant  
reservoir when the parts in the motor  
compartment is cool.  
If the coolant is low, we recommend  
to have the vehicle inspected by an  
authorised HYUNDAI dealer.  
Use only designated coolant water for  
electric vehicles, adding other types  
of water or antifreeze can damage the  
vehicle.  
9-12  
09  
BRAKE FLUID  
Checking the brake fluid level  
WARNING  
Do not let brake fluid enter into your  
eyes. If brake fluid gets in your eyes,  
flush your eyes with clean water for  
at least 15 minutes and get immediate  
medical attention.  
NOTICE  
śꢀ Do not allow brake fluid to contact  
the vehicle’s body paint, as it will  
result in paint damage.  
śꢀ NEVER use brake fluid which has  
been exposed to open air for an  
extended time, as its quality cannot  
be guaranteed. It should be disposed  
of properly.  
ONE1091032E  
Check the fluid level in the reservoir  
periodically. The fluid level should be  
between MAX and MIN marks on the side  
of the reservoir.  
śꢀ Do not use the wrong type of brake  
fluid. A few drops of mineral based  
oil in your brake system can damage  
brake system parts.  
Before removing the reservoir cap and  
adding brake fluid, clean the area around  
the reservoir cap thoroughly to prevent  
brake fluid contamination.  
If the level is low, add the specified brake  
fluid to the MAX level. The level will fall  
with accumulated kilometres. This is a  
normal condition associated with the  
wear of the brake linings. If the fluid  
level is excessively low, we recommend  
that the brake system be checked by an  
authorised HYUNDAI dealer.  
Information  
Use only the specified brake fluid (refer  
to “Recommended Lubricants and  
Capacities” section in chapter 2).  
WARNING  
If the brake system requires frequent  
additions of fluid this could indicate  
a leak in the brake system. We  
recommend that the vehicle be  
inspected by an authorised HYUNDAI  
dealer.  
9-13  
Maintenance  
REDUCTION GEAR FLUID  
WASHER FLUID  
There is no reduction gear fluid level  
gauge in the vehicle. Check the  
Checking the washer fluid level  
reduction gear fluid every 60,000 km  
regularly. If the vehicle is driven under  
severe condition, we recommend that  
you check the maintenance under  
severe usage condition and consult an  
authorised HYUNDAI dealer.  
ONE1091005R  
Check the fluid level in the washer fluid  
reservoir and add fluid if necessary. Plain  
water may be used if washer fluid is not  
available. However, use washer solvent  
with antifreeze characteristics in cold  
climates to prevent freezing.  
WARNING  
To prevent serious injury or death, take  
the following safety precautions when  
using washer fluid:  
śꢀ Do not use coolant or antifreeze in  
the washer fluid reservoir. Coolant  
can severely obscure visibility when  
sprayed on the windscreen and  
may cause loss of vehicle control  
resulting in an accident or damage to  
paint and body trim.  
śꢀ Do not allow sparks or flame to  
contact the washer fluid or the  
washer fluid reservoir. Washer fluid  
may contain alcohol and can be  
flammable.  
śꢀ Do not drink washer fluid and avoid  
contact with skin. Washer fluid is  
harmful to humans and animals.  
śꢀ Keep washer fluid away from  
children and animals.  
9-14  
09  
CABIN AIR FILTER  
Filter inspection  
The cabin air filter should be replaced  
according to the Maintenance Schedule.  
If the vehicle is operated in severely air-  
polluted cities or on dusty rough roads  
for a long period, it should be inspected  
more frequently and replaced sooner.  
Replace the cabin air filter by following  
the procedure below and be careful to  
avoid damaging other components.  
ONE1091007  
Filter replacement  
1. Open the bonnet.  
4. Press and hold the lock (3) on the left  
side of the cover (4).  
5. Replace the cabin air filter.  
6. Reassemble in the reverse order of  
disassembly.  
NOTICE  
ONE1051213  
2. Lift up the front boot cover whilst  
depressing the front boot lever (1).  
„ꢀType A  
„ꢀType B  
OHI078055  
śꢀ Install a new cabin air filter in the  
correct direction with the arrow  
V\PEROꢀꢁƢꢂꢀIDFLQJꢀGRZQZDUGVꢃꢀ  
to prevent noise and reduce  
effectiveness.  
śꢀ Always be sure that the front boot  
cover is firmly closed after replacing  
the cabin air filter.  
ONE1091006  
ONE1091033  
3. Remove the cover by pulling the front  
boot handle (2).  
Otherwise is may cause interior  
damage in the motor compartment,  
noise trouble, or entrance of foreign  
substances.  
9-15  
Maintenance  
WIPER BLADES  
Blade inspection  
Blade replacement  
When the wipers no longer clean  
adequately, the blades may be worn or  
cracked, and require replacement.  
Contamination of either the windscreen  
or the wiper blades with foreign matter  
can reduce the effectiveness of the  
windscreen wipers.  
Common sources of contamination are  
insects, tree sap, and hot wax treatments  
used by some commercial car washes. If  
the blades are not wiping properly, clean  
both the window and the blades with a  
good cleaner or mild detergent, and rinse  
thoroughly with clean water.  
NOTICE  
śꢀ In order to prevent damage to the  
bonnet and the wiper arms, the  
wiper arms should only be lifted  
when in the top wiping position.  
śꢀ Always return the wiper arms to the  
windscreen before driving.  
NOTICE  
Front windscreen wiper blade  
replacement  
To prevent damage to the wiper blades,  
arms or other components, do not:  
śꢀ Use petrol, kerosene, paint thinner,  
or other solvents on or near them.  
śꢀ Attempt to move the wipers  
manually.  
śꢀ Use non-specified wiper blades.  
Information  
Commercial hot waxes applied by  
automatic car washes have been known to  
make the windscreen difficult to clean.  
ONE1091008L  
[A] : Type A, [B] : Type B  
Within 20 seconds of turning off the  
vehicle, lift up (or push down) and  
hold the wiper lever to the MIST (or 1x)  
position for about 2 seconds until the  
wipers move to the top wipe position.  
Information  
Wiper blades are consumable items.  
Normal wear of the wipers may not be  
covered by your vehicle warranty.  
At this time you can lift the wipers off the  
windscreen.  
9-16  
09  
Type A  
OHI078077  
3. Remove the wiper blade from the  
wiper arm (5).  
OGSR076067  
4. Install a new wiper blade assembly in  
the reverse order of removal.  
5. Return the wiper arm on the  
windscreen.  
OGSR076066  
1. Lift up the wiper blade clip. Then lift  
up the wiper blade.  
2. Whilst pushing the lock (1), pull down  
the wiper blade (2).  
9-17  
Maintenance  
Type B  
OHI078077  
3. Remove the wiper blade from the  
OHI078075  
wiper arm (5).  
1. Lift up the wiper blade clip (1). Then  
lift up the wiper blade.  
4. Install the new blade assembly in the  
reverse order of removal.  
5. Return the wiper arm on the  
windscreen.  
OHI078076  
2. Press the clip (3). Then push the blade  
forward through the wiper arm to  
disassemble it (4).  
9-18  
09  
%$77(5<ꢀǣꢁꢂꢀ92/7Ǥ  
śꢀ When lifting a plastic-cased battery,  
WARNING  
excessive pressure on the case may  
cause battery acid to leak. Lift with a  
battery carrier or with your hands on  
opposite corners.  
To prevent SERIOUS INJURY or DEATH  
to you or bystanders, always follow  
these precautions when working near  
or handling the battery:  
śꢀ Do not attempt to jump start your  
vehicle if your battery is frozen.  
Always read and follow  
instructions carefully when  
handling a battery.  
śꢀ NEVER attempt to recharge the  
battery when the vehicle’s battery  
cables are connected to the battery.  
śꢀ The electrical ignition switch works  
Wear eye protection designed  
to protect the eyes from acid  
splashes.  
with high voltage. NEVER touch  
these components with the “  
indicator ON or when the START/  
STOP button is in the ON position.  
”
Keep all flames, sparks, or  
smoking materials away from  
the battery.  
NOTICE  
Always follow these instructions when  
handling your vehicle’s battery to  
prevent damage to your battery:  
śꢀ When you do not use the vehicle for a  
long time in a low temperature area,  
disconnect the battery and keep it  
indoors.  
Hydrogen is always present  
in battery cells, is highly  
combustible, and may explode  
if ignited.  
Keep batteries out of reach of  
children.  
śꢀ Always charge the battery fully to  
prevent battery case damage in low  
temperature areas.  
śꢀ Prevent liquid from wetting the  
battery terminals. The performance  
of the battery may be degraded, and  
may cause injury. Be cautious when  
loading liquid in the tailgate.  
Batteries contain sulphuric  
acid which is highly corrosive.  
Do not allow acid to contact  
your eyes, skin or clothing.  
If acid gets into your eyes, flush your  
eyes with clean water for at least 15  
minutes and get immediate medical  
attention. If acid gets on your skin,  
thoroughly wash the area. If you feel  
pain or a burning sensation, get medical  
attention immediately.  
śꢀ Do not tilt the battery.  
śꢀ If you connect unauthorised  
electronic devices to the battery, the  
battery may be discharged. Never  
use unauthorised devices.  
9-19  
Maintenance  
For best battery service  
Battery capacity label  
ONE1091009R  
OLMB073072  
śꢀ Keep the battery securely mounted.  
śꢀ Keep the battery top clean and dry.  
à The actual battery label in the vehicle  
may differ from the illustration.  
1. CMF60L-BCI : The HYUNDAI model  
name of battery  
2. 12V : The nominal voltage  
śꢀ Keep the terminals and connections  
clean, tight, and coated with  
petroleum jelly or terminal grease.  
śꢀ Rinse any spilled electrolyte from the  
battery immediately with a solution of  
water and baking soda.  
śꢀ If the vehicle is not going to be used  
for an extended time, disconnect the  
battery cables.  
3. 60Ah(20HR) : The nominal capacity  
(in Ampere hours)  
4. 92RC : The nominal reserve capacity  
(in min.)  
5. 550CCA : The cold-test current in  
amperes by SAE  
6. 440A : The cold-test current in  
amperes by EN  
Information  
For vehicles with power tailgate, note that  
the power tailgate needs to be reset after  
the battery has been replaced. For more  
details, refer to “Power Tailgate” section  
in chapter 5.  
Battery recharging  
By battery charger  
Your vehicle has a maintenance-free,  
calcium-based battery.  
śꢀ If the battery becomes discharged  
over a short time (because, for  
NOTICE  
Make sure the battery is installed  
securely when the it is replaced. If the  
battery vibrates whilst driving, the case  
and electrode plate can be damaged.  
example, the headlamps or interior  
lights were left on whilst the vehicle  
was not in use), recharge it by slow  
charging (trickle) for 10 hours.  
śꢀ If the battery gradually discharges  
because of high electrical load whilst  
the vehicle is being used, recharge it  
at 20-30A for two hours.  
9-20  
09  
WARNING  
Information  
An inappropriately disposed  
Always follow these instructions when  
recharging your vehicle’s battery to  
avoid the risk of SERIOUS INJURY or  
DEATH from explosions or acid burns:  
śꢀ Before performing maintenance or  
recharging the battery, turn off all  
accessories and stop the vehicle.  
battery can be harmful to the  
environment and human health.  
Dispose of the battery according  
to your local law(s) or regulation.  
Reset items  
The following items may need to be reset  
after the battery has been discharged or  
the battery has been disconnected.  
śꢀ Driving info/After recharging/  
Accumulated info (items in Utility  
view) (see chapter 4)  
śꢀ Keep all flames, sparks, or smoking  
materials away from the battery.  
śꢀ Always work outdoors or in an area  
with plenty of ventilation.  
śꢀ Wear eye protection when checking  
the battery during charging.  
śꢀ Integrated memory system (see  
śꢀ The battery must be removed from  
the vehicle and placed in a well  
ventilated area.  
śꢀ Watch the battery during charging,  
and stop or reduce the charging  
rate if the battery cells begin boiling  
violently.  
śꢀ The negative battery cable must  
be removed first and installed last  
when the battery is disconnected.  
Disconnect the battery charger in the  
following order:  
chapter 5)  
śꢀ Power window (see chapter 5)  
śꢀ Vision roof (see chapter 5)  
śꢀ Power tailgate (see chapter 5)  
śꢀ Climate control system (see chapter 5)  
śꢀ Clock (see Infotainment system  
manual)  
śꢀ Infotainment system (see  
Infotainment system manual)  
1. Turn off the battery charger main  
switch.  
2. Unhook the negative clamp from  
the negative battery terminal.  
3. Unhook the positive clamp from  
the positive battery terminal.  
śꢀ We recommend that you use  
batteries for replacement from an  
authorised HYUNDAI dealer.  
By jump starting  
After a jump start from a good battery,  
drive the vehicle for 20-30 minutes  
before it is shutoff. The vehicle may  
not restart if you shut it off before the  
battery had a chance to adequately  
recharge. See “Jump Starting” in chapter  
8 for more information on jump starting  
procedures.  
9-21  
Maintenance  
TYRES AND WHEELS  
Tyre care  
WARNING  
For proper maintenance, safety, and  
maximum electric energy economy, you  
must always maintain recommended  
tyre inflation pressures and stay within  
the load limits and weight distribution  
recommended for your vehicle.  
Tyre failure may cause loss of vehicle  
control resulting in an accident. To  
reduce risk of SERIOUS INJURY or  
DEATH, take the following precautions:  
śꢀ Inspect your tyres monthly for  
proper inflation as well as wear and  
damage.  
śꢀ The recommended cold tyre pressure  
for your vehicle can be found in this  
manual and on the tyre label located  
on the driver’s side centre pillar.  
Always use a tyre pressure gauge to  
measure tyre pressure. Tyres with  
too much or too little pressure wear  
unevenly causing poor handling.  
śꢀ Check the pressure of the spare  
every time you check the pressure of  
the other tyres on your vehicle.  
śꢀ Replace tyres that are worn, show  
uneven wear, or are damaged. Worn  
tyres can cause loss of braking  
effectiveness, steering control, or  
traction.  
śꢀ ALWAYS replace tyres with the  
same size, type, construction and  
tread pattern as each tyre that was  
originally supplied with this vehicle.  
Using tyres and wheels other than  
the recommended sizes could cause  
unusual handling characteristics,  
poor vehicle control, or negatively  
affect your vehicle’s Anti-Lock Brake  
System (ABS) resulting in a serious  
accident.  
OJK010021  
All specifications (sizes and pressures)  
can be found on a label attached to the  
driver’s side centre pillar.  
Recommended cold tyre  
inflation pressures  
All tyre pressures (including the spare)  
should be checked when the tyres are  
cold. “Cold tyres” means the vehicle has  
not been driven for at least three hours  
or driven less than 1.6 km.  
Warm tyres normally exceed  
recommended cold tyre pressures by 28  
to 41 kPa (4 to 6 psi). Do not release air  
from warm tyres to adjust the pressure  
or the tyres will be under-inflated. For  
recommended inflation pressure, refer to  
“Tyre and Wheels” section in chapter 2.  
9-22  
09  
Check tyre inflation pressure  
Check your tyres, including the spare  
tyre, once a month or more.  
WARNING  
Recommended pressures must be  
maintained for the best ride, vehicle  
handling, and minimum tyre wear.  
How to check  
Over-inflation or under-inflation  
Use a good quality tyre pressure gauge  
to check tyre pressure. You can not tell  
if your tyres are properly inflated simply  
by looking at them. Radial tyres may look  
properly inflated when they are under-  
inflated.  
Remove the valve cap from the tyre valve  
stem. Press the tyre gauge firmly onto  
the valve to get a pressure measurement.  
If the cold tyre inflation pressure  
matches the recommended pressure on  
the tyre and loading information label,  
no further adjustment is necessary. If the  
pressure is low, add air until you reach  
the recommended pressure. Make sure  
to put the valve caps back on the valve  
stems. Without the valve cap, dirt or  
moisture could get into the valve core  
and cause air leakage. If a valve cap is  
missing, install a new one as soon as  
possible.  
If you overfill the tyre, release air by  
pushing on the metal stem in the centre  
of the tyre valve. Recheck the tyre  
pressure with the tyre gauge. Be sure  
to put the valve caps back on the valve  
stems. Without the valve cap, dirt or  
moisture could get into the valve core  
and cause air leakage. If a valve cap is  
missing, install a new one as soon as  
possible.  
can reduce tyre life, adversely affect  
vehicle handling, and lead to sudden  
tyre failure that could result in loss of  
vehicle control resulting in an accident.  
Severe under-inflation can lead to  
severe heat build-up, causing blowouts,  
tread separation and other tyre failures  
that can result in the loss of vehicle  
control resulting in an accident. This  
risk is much higher on hot days and  
when driving for long periods at high  
speeds.  
CAUTION  
śꢀ Under-inflation results in excessive  
wear, poor handling and reduced  
electric energy economy. Wheel  
deformation is also possible. Keep  
your tyre pressures at the proper  
levels. If a tyre frequently needs  
refilling, we recommend it be  
checked by an authorised HYUNDAI  
dealer.  
śꢀ Over-inflation produces a harsh ride,  
excessive wear at the centre of the  
tyre tread, and a greater possibility  
of damage from road hazards.  
9-23  
Maintenance  
Tyre rotation  
Information  
The outside and inside of the  
To equalize tread wear, HYUNDAI  
recommends that the tyres be rotated  
every 12,000 km or sooner if irregular  
wear develops.  
unsymmetrical tyre is distinguishable.  
When installing an unsymmetrical tyre, be  
sure to install the side marked “outside”  
face the outside. If the side marked  
“inside” is installed on the outside, it  
will have a negative effect on vehicle  
performance.  
During rotation, check the tyres for  
correct balance.  
When rotating tyres, check for uneven  
wear and damage. Abnormal wear  
is usually caused by incorrect tyre  
pressure, improper wheel alignment,  
out-of-balance wheels, severe braking  
or severe cornering. Look for bumps or  
bulges in the tread or side of the tyre.  
Replace the tyre if you find any of these  
conditions. Replace the tyre if fabric or  
cord is visible. After rotation, be sure to  
bring the front and rear tyre pressures  
to specification and check wheel lug nut  
tightness (proper torque is 11~13kgf·m  
(79~94 lbf·ft).  
WARNING  
śꢀ Do not use the compact spare tyre  
for tyre rotation.  
śꢀ Do not mix bias ply and radial ply  
tyres under any circumstances.  
This may cause unusual handling  
characteristics that may cause loss  
of vehicle control resulting in an  
accident.  
OHI078078  
Disc brake pads should be inspected for  
wear whenever tyres are rotated.  
9-24  
09  
Wheel alignment and tyre  
balance  
The wheels on your vehicle were aligned  
and balanced carefully at the factory to  
give you the longest tyre life and best  
overall performance.  
In most cases, you will not need to have  
your wheels aligned again. However,  
if you notice unusual tyre wear or your  
vehicle pulling one way or the other, the  
alignment may need to be reset.  
If you notice your vehicle vibrating when  
driving on a smooth road, your wheels  
may need to be rebalanced.  
WARNING  
To reduce the risk of DEATH or SERIOUS  
INJURY:  
śꢀ Replace tyres that are worn, show  
uneven wear, or are damaged. Worn  
tyres can cause loss of braking  
effectiveness, steering control, and  
traction.  
śꢀ Always replace tyres with the same  
size as each tyre that was originally  
supplied with this vehicle. Using  
tyres and wheels other than the  
recommended sizes could cause  
unusual handling characteristics,  
poor vehicle control, or negatively  
affect your vehicle’s Anti-Lock Brake  
System (ABS) resulting in a serious  
accident.  
NOTICE  
Incorrect wheel weights can damage  
your vehicle’s aluminium wheels. Use  
only approved wheel weights.  
śꢀ When replacing tyres (or wheels), it  
is recommended to replace the two  
front or two rear tyres (or wheels)  
as a pair. Replacing just one tyre  
can seriously affect your vehicle’s  
handling.  
Tyre replacement  
śꢀ Tyres degrade over time, even when  
they are not being used. Regardless  
of the remaining tread, HYUNDAI  
recommends that tyres be replaced  
after six (6) years of normal service.  
śꢀ Heat caused by hot climates or  
frequent high loading conditions can  
accelerate the aging process. Failure  
to follow this warning may cause  
sudden tyre failure, which could lead  
to a loss of vehicle control resulting  
in an accident.  
ONE1081027L  
[A] : Tread wear indicator  
If the tyre is worn evenly, a tread wear  
indicator will appear as a solid band  
across the tread. This shows there is less  
than 1.6 mm of tread left on the tyre.  
Replace the tyre when this happens.  
Do not wait for the band to appear across  
the entire tread before replacing the tyre.  
9-25  
Maintenance  
Tyre sidewall labelling  
WARNING  
This information identifies and describes  
the fundamental characteristics of  
the tyre and also provides the tyre  
identification number (TIN) for safety  
standard certification. The TIN can be  
used to identify the tyre in case of a  
recall.  
The original tyre should be repaired or  
replaced as soon as possible to avoid  
failure of the spare and loss of vehicle  
control resulting in an accident. The  
compact spare tyre is for emergency  
use only. Do not operate your vehicle  
over 80 km/h when using the compact  
spare tyre.  
Wheel replacement  
When replacing the metal wheels for any  
reason, make sure the new wheels are  
equivalent to the original factory units in  
diameter, rim width and offset.  
Tyre traction  
Tyre traction can be reduced if you drive  
on worn tyres, tyres that are improperly  
inflated or on slippery road surfaces.  
Tyres should be replaced when tread  
wear indicators appear. To reduce the  
possibility of losing control, slow down  
whenever there is rain, snow or ice on  
the road.  
ONE1081028L  
1. Manufacturer or brand name  
Manufacturer or brand name is shown.  
2. Tyre size designation  
A tyre’s sidewall is marked with a tyre  
size designation. You will need this  
information when selecting replacement  
tyres for your car. The following explains  
what the letters and numbers in the tyre  
size designation mean.  
Tyre maintenance  
In addition to proper inflation, correct  
wheel alignment helps to decrease tyre  
wear. If you find a tyre is worn unevenly,  
have your dealer check the wheel  
alignment.  
When you have new tyres installed,  
make sure they are balanced. This will  
increase vehicle ride comfort and tyre  
life. Additionally, a tyre should always  
be rebalanced if it is removed from the  
wheel.  
9-26  
09  
Example tyre size designation:  
Tyre speed ratings  
(These numbers are provided as an  
example only; your tyre size designator  
could vary depending on your vehicle.)  
235/55R19 105W  
235 - Tyre width in millimetres.  
The chart below lists many of the  
different speed ratings currently being  
used for passenger vehicle tyres. The  
speed rating is part of the tyre size  
designation on the sidewall of the tyre.  
This symbol corresponds to that tyre’s  
designed maximum safe operating  
speed.  
55 - Aspect ratio. The tyre’s section  
height as a percentage of its width.  
R - Tyre construction code (Radial).  
19 - Rim diameter in inches.  
105 - Load Index, a numerical code  
associated with the maximum load  
the tyre can carry.  
W - Speed Rating Symbol. See the  
speed rating chart in this section for  
additional information.  
Speed Rating  
Maximum Speed  
Symbol  
S
T
180 km/h  
190 km/h  
210 km/h  
240 km/h  
270 km/h  
300 km/h  
H
V
W
Y
Wheel size designation  
Wheels are also marked with important  
information that you need if you ever  
have to replace one. The following  
explains what the letters and numbers in  
the wheel size designation mean.  
Example wheel size designation:  
7.5J X 19  
7.5 - Rim width in inches.  
J - Rim contour designation.  
19 - Rim diameter in inches.  
3. Checking tyre life (TIN : Tyre  
Identification Number)  
Any tyres that are over six years old,  
based on the manufacturing date,  
(including the spare tyre) should be  
replaced by new ones. You can find  
the manufacturing date on the tyre  
sidewall (possibly on the inside of  
the wheel), displaying the DOT Code.  
The DOT Code is a series of numbers  
on a tyre consisting of numbers and  
English letters. The manufacturing date  
is designated by the last four digits  
(characters) of the DOT code.  
DOT : XXXX XXXX OOOO  
The front part of the DOT shows a plant  
code number, tyre size and tread pattern  
and the last four numbers indicate week  
and year manufactured.  
For example:  
DOT XXXX XXXX 5022 represents that the  
tyre was produced in the 50th week of  
2022.  
9-27  
Maintenance  
Tread wear  
4. Tyre ply composition and material  
The tread wear grade is a comparative  
rating based on the wear rate of the tyre  
when tested under controlled conditions  
on a specified government test course.  
For example, a tyre graded 150 would  
wear one-and-a-half times (1½) as well  
on the government course as a tyre  
graded 100.  
The relative performance of tyres  
depends upon the actual conditions  
of their use, however, and may depart  
significantly from the norm due to  
variations in driving habits, service  
practices and differences in road  
characteristics and climate.  
The number of layers or plies of  
rubber-coated fabric in the tyre. Tyre  
manufacturers also must indicate the  
materials in the tyre, which include steel,  
nylon, polyester, and others. The letter  
“R” means radial ply construction; the  
letter “D“ means diagonal or bias ply  
construction; and the letter “B” means  
restrained-bias ply construction.  
5. Maximum permissible inflation  
pressure  
This number is the greatest amount  
of air pressure that should be put in  
the tyre. Do not exceed the maximum  
permissible inflation pressure. Refer to  
the Tyre and Loading Information label  
for recommended inflation pressure.  
These grades are molded on the  
sidewalls of passenger vehicle tyres. The  
tyres available as standard or optional  
equipment on your vehicle may vary with  
respect to grade.  
6. Maximum load rating  
This number indicates the maximum  
load in kilograms and pounds that can  
be carried by the tyre. When replacing  
the tyres on the vehicle, always use a  
tyre that has the same load rating as the  
factory installed tyre.  
Traction - AA, A, B & C  
The traction grades, from highest to  
lowest, are AA, A, B and C. Those grades  
represent the tyre’s ability to stop on wet  
pavement as measured under controlled  
conditions on specified government  
test surfaces of asphalt and concrete. A  
tyre marked C may have poor traction  
performance.  
7. Uniform tyre quality grading  
Quality grades can be found where  
applicable on the tyre sidewall between  
tread shoulder and maximum section  
width.  
For example:  
TREADWEAR 200  
TRACTION AA  
WARNING  
The traction grade assigned to this  
tyre is based on straight ahead braking  
traction tests, and does not include  
acceleration, cornering, hydroplaning,  
or peak traction characteristics.  
TEMPERATURE A  
9-28  
09  
Temperature - A, B & C  
CAUTION  
The temperature grades are A (the  
highest), B and C representing the tyre’s  
resistance to the generation of heat  
and its ability to dissipate heat when  
tested under controlled conditions on a  
specified indoor laboratory test wheel.  
Sustained high temperature can cause  
the material of the tyre to degenerate  
and reduce tyre life, and excessive  
temperature can lead to sudden tyre  
failure. Grades B and A represent higher  
levels of performance on the laboratory  
test wheel than the minimum required  
by law.  
The side wall of a low aspect ratio  
tyre is shorter than the normal one.  
Thus, the low-aspect wheel and tyre  
are easily damaged. Follow the below  
instructions.  
śꢀ When driving on a rough road or  
driving off a road, be careful not to  
damage the tyres and wheels. After  
driving, inspect the tyres and wheels.  
śꢀ When passing over a pothole, speed  
bump, manhole, or curb stone,  
drive the vehicle slowly so as not to  
damage the tyres and wheels.  
śꢀ When there is an impact on a tyre,  
inspect the tyre condition. We  
recommend that you contact an  
authorised HYUNDAI dealer.  
śꢀ Inspect the tyre condition and  
pressure every 3,000 km to prevent  
tyre damage.  
śꢀ It is difficult to recognise a tyre  
damage only with your eyes.  
When there is a slight hint of a tyre  
damage, check and replace the tyre  
to prevent the damage caused by air  
leakage.  
WARNING  
The temperature grade for this tyre is  
established for a tyre that is properly  
inflated and not overloaded. Excessive  
speed, under-inflation, over-inflation,  
or excessive loading, either separately  
or in combination, can cause heat build-  
up and possible sudden tyre failure.  
This may cause loss of vehicle control  
resulting in an accident.  
Low aspect ratio tyres  
(if equipped)  
The aspect ratio is lower than 50 on low  
aspect ratio tyres.  
Because low aspect ratio tyres are  
optimised for handling and braking, their  
sidewall is a little stiffer than a standard  
tyre. Also low aspect ratio tyres tend  
to be wider and consequently have a  
greater contact patch with the road  
surface. In some instances they may  
generate more road noise compared with  
standard tyres.  
śꢀ When a tyre is damaged whilst  
driving on a rough road, off a road,  
or over obstacles, such as a pothole,  
manhole, or curb stone, your  
warranty does not cover the damage.  
śꢀ The tyre information is specified on  
the tyre side wall.  
9-29  
Maintenance  
FUSES  
A vehicle’s electrical system is protected  
from electrical overload damage by  
fuses.  
Ŷ
Blade type  
This vehicle has 5 fuse panels, one  
located in the driver’s side panel bolster,  
the other in the vehicle compartment.  
If any of your vehicle’s lights,  
Normal  
Blown  
accessories, or controls do not work,  
check the appropriate circuit fuse. If a  
fuse has blown, the element inside the  
fuse will be melted or broken.  
Ŷ
Cartridge type  
If the electrical system does not work,  
first check the driver’s side fuse panel.  
Before replacing a blown fuse, turn the  
vehicle and all switches off, and then  
disconnect the negative battery cable.  
Always replace a blown fuse with one of  
the same rating.  
Normal  
Blown  
If the replacement fuse blows, this  
indicates an electrical problem.  
Avoid using the system involved. We  
recommend that you immediately  
consult an authorised HYUNDAI dealer.  
Ŷ
Multi type  
WARNING  
NEVER replace a fuse with anything but  
another fuse of the same rating.  
śꢀ A higher capacity fuse could cause  
Normal  
Blown  
damage and possibly cause a fire.  
OTM078035  
śꢀ Do not install a wire or aluminium  
foil instead of the proper fuse -  
even as a temporary repair. It may  
cause extensive wiring damage and  
possibly a fire.  
NOTICE  
Do not use a screwdriver or any other  
metal object to remove fuses because  
it may cause a short circuit and damage  
the system.  
9-30  
09  
Instrument panel fuse  
replacement  
„ꢀDriver’s side  
ONE1091011R  
5. Pull the suspected fuse straight out.  
Use the removal tool (1) provided in  
the motor compartment fuses panel  
cover.  
6. Check the removed fuse; replace it if  
it is blown. Spare fuses are provided in  
the instrument panel fuse panels (or in  
the motor compartment fuse panel).  
7. Push in a new fuse of the same rating,  
and make sure it fits tightly in the  
clips. If it fits loosely, we recommend  
that you consult an authorised  
HYUNDAI dealer.  
ONE1091010R  
1. Turn the vehicle off.  
2. Turn all other switches off.  
3. Open the fuse panel cover.  
4. Refer to the label on the inside of  
the fuse panel cover to locate the  
suspected fuse location.  
In an emergency, if you do not have  
a spare fuse, use a fuse of the same  
rating from a circuit you may not need  
for operating the vehicle, such as the  
cigarette lighter fuse.  
If the headlamps or other electrical  
components do not work and the fuses  
are undamaged, check the fuse panel  
in the motor compartment. If a fuse is  
blown, it must be replaced with the same  
rating.  
9-31  
Maintenance  
NOTICE  
Motor compartment panel fuse  
replacement  
After checking the fuse panel in the  
motor compartment, securely install  
the fuse panel cover. You may hear a  
clicking sound if the cover is securely  
latched. If it is not securely latched,  
electrical failure may occur from water  
contact.  
Blade fuse / Cartridge fuse  
„ꢀBlade type fuse  
Multi fuse  
„ꢀMulti type  
ONE1091034R  
„ꢀCartridge type fuse  
ONE1091036R  
If the multi fuse is blown, we recommend  
that you consult an authorised HYUNDAI  
dealer.  
ONE1091035R  
1. Turn the vehicle off.  
2. Turn all other switches off.  
3. Remove the fuse panel cover by  
pressing the tap and pulling up.  
4. Check the removed fuse; replace it  
if it is blown. To remove or insert the  
fuse, use the fuse puller in the motor  
compartment fuse panel.  
5. Push in a new fuse of the same rating,  
and make sure it fits tightly in the  
clips. If it fits loosely, we recommend  
that you consult an authorised  
HYUNDAI dealer.  
9-32  
09  
Fuse/relay panel description  
Instrument panel fuse panel  
Information  
Not all fuse panel descriptions in this  
manual may be applicable to your vehicle;  
the information is accurate at the time of  
printing. When you inspect the fuse box on  
your vehicle, refer to the fuse box label.  
ONE1091012R  
Inside the fuse/relay box cover, you can  
find the fuse/relay label describing fuse/  
relay names and ratings.  
ONE1091040L  
9-33  
Maintenance  
Instrument panel fuse panel  
Fuse  
Symbol  
Circuit Protected  
Child Lock Relay, Child Unlock Relay  
Rear Seat Warmer Control Module  
Overhead Console  
Fuse Name  
Child Lock  
Rating  
15A  
20A  
7.5A  
RR SEAT HTR  
A/BAG IND  
IND  
2
10A  
Head-Up Display  
VCU, IBU  
MEMORY2  
START  
7.5A  
2
SOLAR  
20A  
10A  
SDC  
S/CHARGE2  
MIRR HTR  
CHARGER  
Driver Outside Mirror Unit, Passenger Outside  
Mirror Unit  
15A  
10A  
Tailgate Release Relay  
Rear Inverter  
T/GATE  
EPCU2  
2
EPCU  
3
Multifunction Switch, IBU, Stop Lamp Switch,  
Driver Door Module  
7.5A  
7.5A  
10A  
MODULE3  
CLUSTER  
IG3 8  
MODULE  
CLUSTER  
Head-Up Display, Instrument Cluster  
8
V2L Unit, ICCU, VCMS, Rear Electronic Oil Pump,  
CDM  
IG3  
Incar Temperature Sensor, A/V & Navigation  
Head Unit, A/C PTC Heater, A/C Control Module,  
Instrument Cluster  
7
10A  
IG3  
IG3 7  
IAU  
IAU  
10A  
20A  
10A  
Not Used  
1
SOLAR  
CHARGER  
/VISION  
ROOF  
S/CHARGER/  
VISION ROOF  
SDC, Vison Roof  
AFCU  
AFCU, Driver/Passenger Door Outside Handle  
AFCU  
9-34  
09  
Instrument panel fuse panel  
Fuse  
Rating  
Symbol  
Circuit Protected  
Fuse Name  
Front Air Ventilation Seat Control Module, Front  
Seat Warmer Control Module  
20A  
15A  
FR SEAT HET  
WASHER  
Multifunction Switch  
2 IBU  
7.5A  
10A  
10A  
IBU  
IBU2  
IG3 9  
BMS  
9
SCU, Rear Inverter, BMU  
BMU  
IG3  
2
10A  
SRS Control Module  
A/BAG2  
Driver Safety Power Window Module (LHD),  
Passenger Safety Power  
Window Module (RHD), Rear Power Window  
Switch LH  
LH  
25A  
WIN LH  
1
SPARE  
15A  
10A  
Not Used  
SPARE1  
3
Electronic ATM Shift Lever  
E-SHIFTER3  
E-SHIFTER  
Front/Rear Corner Radar LH/RH, Front/Rear  
Inverter, Crash Pad Switch, ADAS Driving ECU,  
4
10A  
15A  
MODULE4  
MODULE  
VESS Unit, Front Radar, Front View Camera, ADAS  
Parking ECU  
USB  
Front USB Charger #1, Front USB Charger #2  
USB CHARGER  
CHARGER  
9-35  
Maintenance  
Instrument panel fuse panel  
Fuse  
Rating  
Symbol  
Circuit Protected  
Fuse Name  
ICU Junction Block (Fuse F6), Instrument Cluster,  
A/C Control Module, Mood Lamp Unit  
15A  
10A  
15A  
25A  
MEMORY1  
SPARE2  
OMU  
2
SPARE  
Not Used  
Driver/Passenger Outside Mirror Unit, Driver Door  
Module  
OMU  
AMP  
AMP  
AMP  
Passenger Safety Power Window Module (LHD),  
Driver Safety Power  
RH  
25A  
7.5A  
WIN RH  
Window Module (RHD), Rear Power Window  
Switch RH  
6
IBU  
MODULE6  
MODULE  
Data Link Connector, Electro Chromic Mirror,  
E-CALL Unit, A/V & Navigation Head Unit, Crash  
Pad Switch, Head Lamp LH/RH, SDC, AMP, Smart  
Phone Wireless Charger, Driver/Passenger Power  
Seat Module, Front Air Ventilation Seat Control  
Module, Front Seat Warmer Control  
5
10A  
MODULE5  
MODULE  
Module, Rear Power Seat LH/RH Module, Rear Seat  
Warmer Control Module  
E-CALL  
10A  
15A  
E-CALL Unit  
IBU  
E-CALL  
IBU1  
1
IBU  
BRAKE  
SWITCH  
BRAKE  
SWITCH  
10A  
Stop Lamp Switch, IBU  
DRV  
Driver Power Seat Switch, Driver Power Seat  
Module (With IMS)  
30A  
P/SEAT DRV  
9-36  
09  
Instrument panel fuse panel  
Fuse  
Symbol  
Circuit Protected  
Rear Power Seat RH Module  
Fuse Name  
Rating  
REAR RH  
30A  
7.5A  
P/SEAT RR RH  
A/C1  
1
A/C  
A/C Control Module  
SRS Control Module  
1
15A  
A/BAG1  
AMP, P/E Junction Block (Power Outlet Relay  
(RLY.11)), IBU, E-CALL Unit, ADAS Unit (Parking),  
A/V & Navigation Keyboard, A/V & Navigation Head  
Unit  
2
10A  
MODULE  
MODULE2  
MULTI  
MEDIA  
15A  
A/V & Navigation Head Unit  
MULTIMEDIA  
DR LOCK  
Door Lock Relay, Door Unlock Relay, Dead Lock  
Relay  
20A  
Hazard Lamp Switch, Multifunction Switch, Data  
Link Connector, Rain  
Sensor, P/R Junction Block (Blower Relay (RLY.9)),  
Driver/Passenger Door Speaker Mood Lamp,  
Driver/Passenger Door Arm Rest Mood Lamp, Rear  
Door Mood Lamp LH/RH, UIP Siren, PTG Unit, UIP  
Sensor, Rear Power Seat LH/RH Module, Driver/  
Passenger Power Seat Module  
1
10A  
MODULE1  
MODULE  
PASS  
Passenger Power Seat Switch, Passenger Power  
Seat Module  
30A  
P/SEAT PASS  
REAR LH  
30A  
7.5A  
Rear Power Seat LH Module  
P/SEAT RR LH  
MODULE7  
7
Rear Seat Warmer Control Module  
MODULE  
9-37  
Maintenance  
Motor compartment fuse panel  
Information  
Not all fuse panel descriptions in this  
manual may be applicable to your vehicle;  
the information is accurate at the time of  
printing. When you inspect the fuse panel  
in your vehicle, refer to the fuse panel  
label.  
ONE1091013R  
Inside the fuse/relay box cover, you can  
find the fuse/relay label describing fuse/  
relay names and ratings.  
ONE1091041L  
9-38  
09  
Motor compartment fuse panel  
Fuse  
Rating  
Symbol  
Circuit Protected  
Type  
Fuse Name  
P/R Junction Block (Fuse : F15, F17, F20,  
F21)  
IG1  
180A  
100A  
60A  
LDC  
MDPS1  
B+5  
MULTI  
FUSE-1  
1
1
MDPS Unit  
5
3
2
PCB Block (IG3 Main Relay, Fuse : F1, F2,  
F3, F4, F6)  
ICU Junction Block (Fuse : F1, F2, F10, F11,  
F19, F20,F29, F37, F38, F46, F47, F55, F56)  
60A  
60A  
B+3  
B+2  
ICU Junction Block (IPS1, IPS4, IPS6,  
IPS8, IPS9, IPS10)  
50A  
60A  
60A  
40A  
P/R Junction Block (RLY.3)  
IEB Unit  
RR HTD  
IEB1  
MULTI  
FUSE-2  
1
IEB  
2
IEB Unit  
IEB  
IEB2  
4
Multipurpose Check Connector  
IEB  
IEB4  
IG1  
IG2  
40A  
40A  
80A  
P/R Junction Block (RLY.5, RLY.7)  
P/R Junction Block (RLY.10)  
Cooling Fan Motor  
IG1  
IG2  
C/FAN  
1
1
ICU Junction Block (IPS2, IPS3, IPS4,  
IPS5)  
50A  
50A  
50A  
B+1  
MULTI  
FUSE-3  
Trailer Connector Unit  
TRAILER1  
BLOWER  
P/R Junction Block (RLY.9)  
9-39  
Maintenance  
Fuse  
Rating  
Symbol  
Circuit Protected  
Type  
Fuse Name  
ICU Junction Block (Long Term Load  
Latch Relay,  
Fuse : F8, F17, F18, F26, F27, F35, F36,  
F45, F44, F53, F54)  
4
40A  
B+4  
1
40A  
10A  
P/R Junction Block (RLY.2, Fuse : F22)  
E-SHIFTER1  
CHARGER1  
E-SHIFTER  
1
P/R Junction Block (RLY.1, RLY.12), ICCU,  
VCMS  
CHARGER  
10A  
10A  
20A  
CDM  
CHARGER2  
AMS  
CHARGER  
AMS  
12V Battery Sensor  
Electronic Water Pump #1  
FUSE  
1 EWP  
2 EWP  
EWP1  
20A  
20A  
20A  
10A  
40A  
Electronic Water Pump #2  
Not Used  
EWP2  
IG3 10  
10 IG3  
2
Trailer Connector Unit  
VESS Unit  
TRAILER2  
VESS  
VESS  
1
VCU  
VCU  
VCU1  
9-40  
09  
Fuse  
Rating  
Symbol  
Circuit Protected  
Type  
Fuse Name  
1
POWER  
OUTLET  
40A  
P/R Junction Block (RLY.11)  
P/OUTLET1  
30A  
15A  
PTG Unit  
T/GATE  
A/C2  
2
A/C Control Module  
Rear Electronic Oil Pump  
Front Electronic Oil Pump (4WD)  
A/C  
1
40A  
40A  
EOP  
EOP1  
FUSE  
2 EOP  
EOP2  
2
P/R Junction Block (RLY.2), SCU,  
Electronic ATM Shift Lever  
10A  
20A  
20A  
E-SHIFTER2  
P/OUTLET3  
P/OUTLET2  
E-SHIFTER  
3
POWER  
OUTLET  
Rear Power Outlet  
Front Power Outlet  
2 POWER  
OUTLET  
9-41  
Maintenance  
Fuse  
Symbol  
Circuit Protected  
PCB Block (Wiper Main Relay)  
Fuse Name  
Rating  
1
25A  
WIPER1  
1 EPCU  
15A  
10A  
15A  
Front Inverter (4WD)  
EPCU1  
B/ALARM  
HORN  
PCB Block (Burglar Alarm Horn Relay)  
PCB Block (Horn Relay)  
2
7.5A  
IBU  
WIPER2  
2 VCU  
15A  
20A  
15A  
10A  
10A  
VCU  
VCU2  
IG3 1  
1
ICU Junction Block (Fuse : F14, F16, F24)  
Electronic Water Pump  
BMS Coolant 3Way Valve  
VCU  
IG3  
3
IG3 3  
IG3 5  
VCU3  
IG3  
5
IG3  
3 VCU  
4
A/C Coolant Valve, Electronic Water Pump #1, #2,  
Electronic A/C Compressor  
10A  
10A  
10A  
IG3 4  
IEB3  
IG3 6  
IG3  
3
Multipurpose Check Connector, IEB Unit  
IEB  
6
Cooling Fan Motor, Front Electronic Oil Pump  
(4WD)  
IG3  
2
1
1
10A  
15A  
MDPS Unit  
MDPS2 *  
2
Front Inverter (4WD), VCU  
IG3 2  
IG3  
*1 :  
MDPS (Motor Driven Power Steering) is the same as EPS (Electric Power Steering)  
9-42  
09  
LIGHT BULBS  
We recommend you to consult an  
Information - Headlamp  
desiccant (if equipped)  
authorised HYUNDAI dealer to replace  
most vehicle light bulbs. It is difficult  
to replace vehicle light bulbs because  
other parts of the vehicle must be  
This vehicle is equipped with desiccant to  
reduce fogging inside the headlamp due  
to moisture. The desiccant is consumable  
and its performance may change based on  
the used period or environment. If fogging  
inside the headlamp due to moisture  
continues for a long time, we recommend  
that you consult an authorised HYUNDAI  
dealer.  
removed before you can get to the bulb.  
This is especially true for removing the  
headlamp assembly to get to the bulb(s).  
Removing/installing the headlamp  
assembly can result in damage to the  
vehicle.  
WARNING  
Information  
śꢀ Prior to working on a light, depress  
the foot brake, shift to P (Park), apply  
the parking brake, press the Start/  
Stop button to the OFF position  
and take the key with you when  
leaving the vehicle to avoid sudden  
movement of the vehicle and to  
prevent possible electric shock.  
The headlamp and tail lamp lenses could  
appear frosty if the vehicle is washed after  
driving or the vehicle is driven at night  
in wet weather. This condition is caused  
by temperature difference between the  
lamp inside and outside and, it does not  
indicate a problem with your vehicle.  
When moisture condenses in the lamp,  
it will be removed after driving with the  
headlamp on. The removable level may  
differ depending on lamp size, lamp  
position and environmental condition.  
However, if moisture is not removed, we  
recommend that your vehicle is inspected  
by an authorised HYUNDAI dealer.  
śꢀ Be aware the bulbs may be hot and  
may burn your fingers.  
NOTICE  
Be sure to replace the burned-out bulb  
with one of the same wattage rating.  
Otherwise, it may cause damage to the  
fuse or electrical wiring system.  
NOTICE  
To prevent damage, do not clean the  
headlamp lens with chemical solvents  
or strong detergents.  
9-43  
Maintenance  
Headlamp, parking lamp, turn  
signal lamp, Daytime Running  
Light (DRL) replacement  
Information  
śꢀ A normally functioning lamp may  
flicker momentarily to stabilize the  
vehicle’s electrical control system.  
However, if the lamp goes out after  
flickering momentarily, or continues to  
flicker, we recommend the system be  
checked by an authorised HYUNDAI  
dealer.  
„ꢀType A  
śꢀ The parking lamp may not turn on  
when the parking lamp switch is turned  
on, but the parking lamp and headlamp  
switch may turn on when the headlamp  
switch is turned on. This may be caused  
by network failure or vehicle electrical  
control system malfunction. If this  
occurs, we recommend the system be  
checked by an authorised HYUNDAI  
dealer.  
ONE1091014L  
„ꢀType B  
Information  
The headlamp aiming should be adjusted  
after an accident or after the headlamp  
assembly is reinstalled.  
ONE1091015L  
(1) Headlamp (High/Low)  
(2) Parking lamp/Daytime running light  
(3) Turn signal lamp  
- Type A : Bulb  
- Type B : LED (if equipped)  
(4) Garnish hidden lighting (if equipped)  
9-44  
09  
If the LED lamp does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
WARNING  
śꢀ Wear eye protection when changing  
a bulb. Allow the bulb to cool down  
before handling it.  
śꢀ Always handle them carefully, and  
avoid scratches and abrasions. If  
the bulbs are lit, avoid contact with  
liquids.  
śꢀ Never touch the glass with bare  
hands. Residual oil may cause the  
bulb to overheat and burst when lit.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
Turn signal lamp (bulb type)  
śꢀ A bulb should be operated only when  
installed in a turn signal lamp.  
1. Engage the parking brake and  
disconnect the negative battery cable.  
śꢀ If a bulb becomes damaged or  
cracked, replace it immediately and  
carefully dispose of it.  
2. Remove wheel guard clips (under the  
front bumper).  
śꢀ Replacing the bulb may cause  
damage to the bulb relevant parts  
of the vehicle, and also may cause  
injuries. To replace the turn signal  
lamp, we recommend to visit an  
authorised HYUNDAI dealer.  
3. Push the wheel guard aside and  
remove the bulb socket by turning it  
anti-clockwise.  
4. Remove the bulb from the socket  
by pressing it in and rotating it anti-  
clockwise until the tabs on the bulb  
align with the slots in the socket.  
Pull the bulb out of the socket.  
5. Install a new bulb by inserting it into  
the socket and rotating it until it locks  
into place.  
6. Push the socket into the assembly and  
turn the socket clockwise.  
7. Install the wheel guard in the reverse  
order.  
9-45  
Maintenance  
Side repeater lamp replacement  
Rear combination lamp  
replacement  
„ꢀType A  
ONE1091029  
ONE1091017L  
If the LED lamp (1) does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
„ꢀType B  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
Unless a skilled technician checks or  
repairs the LED lamp, it may damage  
related parts of the vehicle.  
ONE1091018L  
(1) Stop lamp  
(2) Rear lamp/Stop lamp  
(3) Turn signal lamp  
(4) Reverse lamp  
- Type A: Bulb  
- Type B: LED (if equipped)  
If the LED lamp does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
9-46  
09  
Turn signal lamp, Back-up lamp  
(bulb type)  
WARNING  
śꢀ Wear eye protection when changing  
a bulb. Allow the bulb to cool down  
before handling it.  
śꢀ Always handle them carefully, and  
avoid scratches and abrasions. If  
the bulbs are lit, avoid contact with  
liquids.  
śꢀ Never touch the glass with bare  
hands. Residual oil may cause the  
bulb to overheat and burst when lit.  
1. Disconnect the negative battery  
cable.  
2. Loosen the retaining clips under the  
bumper and screws on the wheel  
house trim.  
3. Prey trim under the bumper toward  
the vehicle.  
4. Remove the socket from the assembly  
by turning the socket anti-clockwise  
until the tabs on the socket align with  
the slots on the assembly.  
5. Remove the bulb by pulling it straight  
out.  
śꢀ A bulb should be operated only when  
installed in a turn signal lamp.  
śꢀ If a bulb becomes damaged or  
cracked, replace it immediately and  
carefully dispose of it.  
6. Insert a new bulb in the socket.  
7. Reinstall the light assembly to the  
body of the vehicle.  
śꢀ Replacing the bulb may cause  
damage to the bulb relevant parts  
of the vehicle, and also may cause  
injuries. To replace the turn signal  
lamp, we recommend to visit an  
authorised HYUNDAI dealer.  
9-47  
Maintenance  
High mounted stop lamp  
replacement  
Licence plate lamp replacement  
ONE1091020  
ONE1091019K  
If the LED lamp (1) does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
If the LED lamp (1) does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle  
9-48  
09  
Front boot lamp replacement  
Interior light replacement  
„ꢀFirst row lamp (if equipped)  
ONE1091022  
ONE1091021  
„ꢀRear seat room lamp (without vision roof/  
solar roof)  
If the LED lamp (1) does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
ONE1091023  
„ꢀRear seat personal lamp (with vision roof/  
solar roof)  
ONE1091024  
9-49  
Maintenance  
„ꢀMood lamp (if equipped)  
Vanity mirror lamp and luggage  
compartment lamp (Bulb type)  
„ꢀVanity mirror lamp  
ONE1091026R  
„ꢀGlove box lamp  
OJS078041  
„ꢀLuggage compartment lamp  
ONE1091025R  
If the LED lamp (1) does not operate,  
we recommend that the system be  
inspected by an authorised HYUNDAI  
dealer.  
The LED lamps cannot be replaced as  
a single unit because it is an integrated  
unit. The LED lamps has to be replaced  
with the unit.  
ONE1091027  
1. Apply the parking brake and place the  
Start/Stop button in the OFF position.  
2. Turn off the lights.  
3. Using a flat-head screwdriver, gently  
pry the lens from the interior light  
housing.  
4. Remove the bulb by pulling it straight  
out.  
A skilled technician should check or  
repair the LED lamp, for it may damage  
related parts of the vehicle.  
5. Insert a new bulb into the socket.  
6. Align the lens tabs with the interior  
light housing notches and snap the  
lens into place.  
NOTICE  
Use care not to dirty or damaged lenses,  
lens tabs, and plastic housings.  
9-50  
09  
APPEARANCE CARE  
Insects, tar, tree sap, bird droppings,  
Exterior care  
industrial pollution and similar deposits  
can damage your vehicle’s finish if not  
removed immediately.  
NOTICE  
If you park your vehicle near a stainless  
steel sign or glass facade building, the  
vehicle’s exterior plastic parts such  
as a bumper, spoiler, garnish, lamp  
or outside rearview mirror might be  
damaged due to sunlight reflected from  
the sign or building. To prevent damage  
of the exterior plastic parts, you should  
avoid parking in areas where light may  
be reflected or use a car cover. (The  
exterior plastic parts applied to your  
vehicle may vary.)  
Even prompt washing with plain water  
may not completely remove all these  
deposits. A mild soap, safe for use on  
painted surfaces, should be used.  
After washing, rinse the vehicle  
thoroughly with lukewarm or cold water.  
Do not allow soap to dry on the finish.  
High-pressure washing  
śꢀ When using high-pressure washers,  
make sure to maintain sufficient  
distance from the vehicle.  
Exterior general caution  
Insufficient clearance or excessive  
pressure can lead to component  
damage or water penetration.  
It is very important to follow the label  
directions when using any chemical  
cleaner or polish. Read all warning and  
caution statements that appear on the  
label.  
śꢀ Do not spray the camera, sensors or  
its surrounding area directly with a  
high pressure washer. Shock applied  
from high pressure water may cause  
the device to not operate normally.  
śꢀ Do not bring the nozzle tip close to  
boots (rubber or plastic covers) or  
connectors as they may be damaged  
if they come into contact with high  
pressure water.  
Finish maintenance  
Washing  
To help protect your vehicle’s finish from  
rust and deterioration, wash it thoroughly  
and frequently at least once a month  
with lukewarm or cold water.  
If you use your vehicle for off-road  
driving, you should wash it after each  
off-road trip. Pay special attention to the  
removal of any accumulation of salt, dirt,  
mud, and other foreign materials. Make  
sure the drain holes in the lower edges  
of the doors and rocker panels are kept  
clear and clean.  
WARNING  
After washing the vehicle, test the  
brakes whilst driving slowly to see  
if they have been affected by water  
before getting on the road. If braking  
performance is impaired, dry the  
brakes by applying them lightly whilst  
maintaining a slow forward speed.  
9-51  
Maintenance  
NOTICE  
NOTICE  
śꢀ Do not use strong soap, chemical  
detergents or hot water, and do not  
wash the vehicle in direct sunlight  
or when the body of the vehicle is  
warm.  
Matte paint finish vehicle (if equipped)  
Automatic car wash which uses rotating  
brushes should not be used as this can  
damage the surface of your vehicle. A  
steam cleaner which washes the vehicle  
surface at high temperature may result  
the oil to adhere and leave stains that is  
difficult to remove.  
Use a soft cloth (e.g. microfiber towel  
or sponge) when washing your vehicle  
and dry with a microfiber towel. When  
you hand wash your vehicle, you should  
not use a cleaner that finishes with wax.  
If the vehicle surface is too dirty (sand,  
dirt, dust, contaminant, etc.), clean the  
surface with water before washing the  
car.  
śꢀ Be careful when washing the side  
windows of your vehicle.  
śꢀ Especially, with high-pressure water,  
water may leak through the windows  
and wet the interior.  
śꢀ To prevent damage to the plastic  
parts, do not clean with chemical  
solvents or strong detergents.  
NOTICE  
Waxing  
A good coat of wax is a barrier between  
your paint and contaminate. Keeping  
a good coat of wax on your vehicle will  
help protect it.  
Wax the vehicle when water will no  
longer bead on the paint.  
Always wash and dry the vehicle before  
waxing. Use a good quality liquid or  
paste wax, and follow the manufacturer’s  
instructions. Wax all metal trim to protect  
it and to maintain its luster.  
Removing oil, tar, and similar materials  
with a spot remover will usually strip the  
wax from the finish. Be sure to re-wax  
these areas even if the rest of the vehicle  
does not yet need waxing.  
ONE1091028  
śꢀ Water washing in the motor  
compartment including high  
pressure water washing may cause  
the failure of electrical circuits  
located in the vehicle compartment.  
śꢀ Never allow water or other liquids  
to come in contact with electrical/  
electronic components inside the  
vehicle as water or other liquids may  
flow in to the motor compartment  
through the front boot and damage  
electrical/electronic components.  
9-52  
09  
NOTICE  
NOTICE  
śꢀ Wiping dust or dirt off the body with  
Matte paint finish vehicle (if equipped)  
a dry cloth will scratch the finish.  
In case of matte paint finish vehicles,  
it is impossible to modify only the  
damaged area and repair of the whole  
part is necessary. If the vehicle is  
damaged and painting is required,  
we recommend that you have your  
vehicle maintained and repaired by  
an authorised HYUNDAI dealer. Take  
extreme care, as it is difficult to restore  
the quality after the repair.  
śꢀ Do not use steel wool, abrasive  
cleaners, or strong detergents  
containing highly alkaline or  
caustic agents on chrome-plated or  
anodized aluminium parts. This may  
result in damage to the protective  
coating and cause discolouration or  
paint deterioration.  
NOTICE  
Bright-metal maintenance  
śꢀ To remove road tar and insects, use  
a tar remover, not a scraper or other  
sharp object.  
śꢀ To protect the surfaces of brightmetal  
parts from corrosion, apply a coating  
of wax or chrome preservative and rub  
to a high luster.  
śꢀ During winter weather or in coastal  
areas, cover the bright metal parts  
with a heavier coating of wax or  
preservative. If necessary, coat the  
parts with non-corrosive petroleum  
jelly or other protective compound.  
Matte paint finish vehicle (if equipped)  
Do not use any polish protector such as  
a detergent, an abrasive and a polish.  
In case wax is applied, remove the wax  
immediately using a silicon remover  
and if any tar or tar contaminant is on  
the surface use a tar remover to clean.  
However, be careful not to apply too  
much pressure on the painted area.  
Finish damage repair  
Deep scratches or stone chips in the  
painted surface must be repaired  
promptly. Exposed metal will quickly  
rust and may develop into a major repair  
expense.  
NOTICE  
If your vehicle is damaged and requires  
any metal repair or replacement,  
be sure the body shop applies anti-  
corrosion materials to the parts  
repaired or replaced.  
9-53  
Maintenance  
Underbody maintenance  
Aluminium wheel maintenance  
Corrosive materials used for ice and  
snow removal and dust control may  
collect on the underbody. If these  
materials are not removed, accelerated  
rusting can occur on underbody parts  
such as the frame and floor pan, even  
though they have been treated with rust  
protection.  
Thoroughly flush the vehicle underbody  
and wheel openings with lukewarm or  
cold water once a month, after off-road  
driving and at the end of each winter. Pay  
special attention to these areas because  
it is difficult to see all the mud and dirt.  
It will do more harm than good to wet  
down the road grime without removing  
it. The lower edges of doors, rocker  
panels, and frame members have drain  
holes that should not be allowed to clog  
with dirt; trapped water in these areas  
can cause rusting.  
The aluminium wheels are coated with a  
clear protective finish.  
śꢀ Do not use abrasive cleaner, polishing  
compound, solvent, or wire brushes  
on aluminium wheels.  
śꢀ Clean the wheel when it has cooled.  
śꢀ Use only a mild soap or neutral  
detergent, and rinse thoroughly with  
water. Also, clean the wheels after  
driving on salted roads.  
śꢀ Do not wash the wheels with high-  
speed car wash brushes.  
śꢀ Do not use any cleaners containing  
acid or alkaline detergents.  
Corrosion protection  
Protecting your vehicle from corrosion  
By using the most advanced design  
and construction practices to combat  
corrosion, HYUNDAI produces vehicles  
of the highest quality. However, this is  
only part of the job. To achieve the long-  
term corrosion resistance your vehicle  
can deliver, the owner’s cooperation and  
assistance is also required.  
WARNING  
After washing the vehicle, test the  
brakes whilst driving slowly to see if  
they have been affected by water. If  
braking performance is impaired, dry  
the brakes by applying them lightly  
whilst maintaining a slow forward  
speed.  
Common causes of corrosion  
The most common causes of corrosion  
on your vehicle are:  
śꢀ Road salt, dirt and moisture that is  
allowed to accumulate underneath  
the vehicle.  
śꢀ Removal of paint or protective  
coatings by stones, gravel, abrasion  
or minor scrapes and dents which  
leave unprotected metal exposed to  
corrosion.  
9-54  
09  
High-corrosion areas  
To help prevent corrosion  
If you live in an area where your vehicle is  
regularly exposed to corrosive materials,  
corrosion protection is particularly  
important. Some of the common causes  
of accelerated corrosion are road salts,  
dust control chemicals, ocean air and  
industrial pollution.  
Keep your vehicle clean  
The best way to prevent corrosion is  
to keep your vehicle clean and free of  
corrosive materials. Attention to the  
underside of the vehicle is particularly  
important.  
śꢀ If you live in a high-corrosion area —  
where road salts are used, near the  
ocean, areas with industrial pollution,  
acid rain, etc.—, you should take extra  
care to prevent corrosion. In winter,  
hose off the underside of your vehicle  
at least once a month and be sure to  
clean the underside thoroughly when  
winter is over.  
śꢀ When cleaning underneath the  
vehicle, pay particular attention to the  
components under the fenders and  
other areas that are hidden from view.  
Do a thorough job; just dampening  
the accumulated mud rather than  
washing it away will accelerate  
corrosion rather than prevent it. Water  
under high pressure and steam are  
particularly effective in removing  
accumulated mud and corrosive  
materials.  
Moisture breeds corrosion  
Moisture creates the conditions in  
which corrosion is most likely to occur.  
For example, corrosion is accelerated  
by high humidity, particularly when  
temperatures are just above freezing. In  
such conditions, the corrosive material is  
kept in contact with the vehicle surfaces  
by moisture that is slow to evaporate.  
Mud is particularly corrosive because  
it is slow to dry and holds moisture in  
contact with the vehicle. Although the  
mud appears to be dry, it can still retain  
moisture and promote corrosion.  
High temperatures can also accelerate  
corrosion of parts that are not properly  
ventilated so the moisture can be  
dispersed. For all these reasons, it is  
particularly important to keep your  
vehicle clean and free of mud or  
accumulations of other materials. This  
applies not only to the visible surfaces  
but particularly to the underside of the  
vehicle.  
śꢀ When cleaning lower door panels,  
rocker panels and frame members, be  
sure that drain holes are kept open so  
that moisture can escape and not be  
trapped inside to accelerate corrosion.  
9-55  
Maintenance  
Keep your garage dry  
Don’t park your vehicle in a damp,  
NOTICE  
śꢀ Never allow water or other liquids  
to come in contact with electrical/  
electronic components inside the  
vehicle as this may damage them.  
śꢀ When cleaning leather products  
(steering wheel, seats etc.), use  
neutral detergents or low alcohol  
content solutions. If you use high  
alcohol content solutions or acid/  
alkaline detergents, the colour of the  
leather may fade or the surface may  
get stripped off.  
poorly ventilated garage. This creates  
a favorable environment for corrosion.  
This is particularly true if you wash your  
vehicle in the garage or drive it into the  
garage when it is still wet or covered with  
snow, ice or mud. Even a heated garage  
can contribute to corrosion unless it is  
well ventilated so moisture is dispersed.  
Keep paint and trim in good condition  
Scratches or chips in the finish should  
be covered with “touch-up” paint as  
soon as possible to reduce the possibility  
of corrosion. If bare metal is showing  
through, the attention of a qualified body  
and paint shop is recommended.  
Bird droppings are highly corrosive and  
may damage painted surfaces in just a  
few hours. Always remove bird droppings  
as soon as possible.  
Cleaning the upholstery and interior  
trim  
Vehicle interior surfaces  
Remove dust and loose dirt from interior  
surfaces with a whisk broom or a vacuum  
cleaner. If necessary, clean interior  
surfaces with a mixture of warm water  
and mild non-detergent cleaner (test all  
cleaners on a concealed area before use).  
Interior care  
Interior general precautions  
Fabric (if equipped)  
Prevent caustic solutions such  
Remove dust and loose dirt from  
as perfume and cosmetic oil,  
fabric with a whisk broom or vacuum  
cleaner. Clean with a mild soap solution  
recommended for upholstery or carpets.  
Remove fresh spots immediately with a  
fabric spot cleaner. If fresh spots do not  
receive immediate attention, the fabric  
can be stained and its colour can be  
affected. Also, its fire-resistant properties  
can be reduced if the material is not  
properly maintained.  
from contacting the interior parts  
because they may cause damage or  
discolouration. If they do contact the  
interior parts, wipe them off immediately.  
See the instructions for the proper way to  
clean vehicle interior surfaces.  
9-56  
09  
śꢀ Caring for the leather seats  
NOTICE  
- Vacuum the seat periodically to  
Using anything but recommended  
cleaners and procedures may affect the  
fabric’s appearance and fire-resistant  
properties.  
remove dust and sand on the seat. It  
will prevent abrasion or damage of  
the leather and maintain its quality.  
- Wipe the natural leather seat cover  
often with dry or soft cloth.  
Leather (if equipped)  
- Use of proper leather protector may  
prevent abrasion of the cover and  
helps maintain the colour. Be sure  
to read the instructions and consult  
a specialist when using leather  
coating or protective agent.  
- Light coloured (beige, cream beige)  
leather is easily contaminated and  
the stain is noticeable. Clean the  
seats frequently.  
śꢀ Features of seat leather  
- Leather is made from the outer skin  
of an animal, which goes through a  
special process to be available for  
use. Since it is a natural product,  
each part differs in thickness or  
density.  
Wrinkles may appear as a natural  
result of stretching and shrinking  
depending on the temperature and  
humidity.  
- Avoid wiping with wet cloth. It may  
cause the surface to crack.  
- The seat is made of stretchable  
fabric to improve comfort.  
śꢀ Cleaning the leather seats  
- Remove all contaminations  
- The parts contacting the body are  
curved and the side supporting  
area is high which provides driving  
comfort and stability.  
- Wrinkles may appear naturally  
from usage. It is not a fault of the  
products.  
instantly. Refer to instructions below  
for removal of each contaminant.  
- Cosmetic products (sunscreen,  
foundation, etc.)  
Apply cleansing cream on a cloth  
and wipe the contaminated spot.  
Wipe off the cream with a wet cloth  
and remove water with a dry cloth.  
NOTICE  
- Beverages (coffee, soft drink, etc.)  
śꢀ Wrinkles or abrasions which appear  
naturally from usage are not covered  
by warranty.  
śꢀ Belts with metallic accessories,  
zippers or keys inside the back  
pocket may damage the seat fabric.  
Apply a small amount of neutral  
detergent and wipe until  
contaminations do not smear.  
- Oil  
Remove oil instantly with  
absorbable cloth and wipe with  
stain remover used only for natural  
leather.  
- Chewing gum  
Harden the gum with ice and  
remove gradually.  
śꢀ Make sure not to wet the seat. It may  
change the nature of natural leather.  
śꢀ Jeans or clothes which could bleach  
may contaminate the surface of the  
seat covering fabric.  
9-57  
Maintenance  
Cleaning the seat belt webbing  
Clean the belt webbing with any  
mild soap solution recommended for  
cleaning upholstery or carpet. Follow  
the instructions provided with the soap.  
Do not bleach or re-dye the webbing  
because this may weaken the seat belt.  
Cleaning the interior window glass  
If the interior glass surfaces of the  
vehicle become fogged (that is, covered  
with an oily, greasy or waxy film), they  
should be cleaned with glass cleaner.  
Follow the directions on the glass cleaner  
container.  
NOTICE  
Do not scrape or scratch the inside of  
the rear window. This may result in  
damage to the rear window defroster  
grid.  
9-58  

Related Topics

Motor compartment Maintenance services Owner maintenance Scheduled maintenance services Explanation of scheduled maintenance items Coolant Brake fluid Reduction gear fluid Washer fluid Cabin air filter Wiper blades Battery (12 volt) Tyres and wheels Fuses Light bulbs Appearance care

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot