Maintenance
FUSES
A vehicle’s electrical system is protected
from electrical overload damage by
fuses.
Ŷ
Blade type
This vehicle has 5 fuse panels, one
located in the driver’s side panel bolster,
the other in the vehicle compartment.
If any of your vehicle’s lights,
Normal
Blown
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
Ŷ
Cartridge type
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, turn the
vehicle and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
Normal
Blown
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved. We
recommend that you immediately
consult an authorised HYUNDAI dealer.
Ŷ
Multi type
WARNING
NEVER replace a fuse with anything but
another fuse of the same rating.
śꢀ A higher capacity fuse could cause
Normal
Blown
damage and possibly cause a fire.
OTM078035
śꢀ Do not install a wire or aluminium
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
9-30