2016-2023 Hyundai Ix35 SUV Multimedia System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Multimedia System for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Multimedia System  
AUDIO SYSTEM......................................................4-2  
Antenna ...............................................................................4-2  
Audio remote control .......................................................4-3  
HOW VEHICLE AUDIO WORKS  
(FOR EUROPE) ..........................................................4-4  
Using a cellular phone or a two-way radio...............4-5  
CD PLAYER (FOR RDS MODEL) :  
HOW VEHICLE AUDIO WORKS  
(EXCEPT EUROPE)...............................................4-53  
Using a cellular phone or a two-way radio.............4-54  
CD PLAYER : AC100TMGG, AC110TMGG,  
AC100TMGE, AC110TMGE,  
AC100TMGN, AC110TMGN,  
AC100TMGL*, AC110TMGL*.......4-61  
System controllers and functions...............................4-62  
Setup ..................................................................................4-65  
Radio...................................................................................4-74  
Basic method of use ......................................................4-76  
Bluetooth® Wireless Technology audio .....................4-84  
Appendix............................................................................4-89  
AC200TMEE, AC210TMEE............4-12  
CD PLAYER : AC100TMEG, AC110TMEG,  
AC100TMEE, AC110TMEE............4-13  
System controllers and functions  
(for RDS model)...............................................................4-14  
System controllers and functions...............................4-17  
Setup (for RDS model)...................................................4-20  
Setup ..................................................................................4-25  
Radio (for RDS model)...................................................4-35  
Radio...................................................................................4-37  
Basic method of use ......................................................4-39  
Bluetooth® Wireless Technology audio .....................4-46  
Appendix............................................................................4-52  
4
Multimedia System  
AUDIO SYSTEM  
Antenna  
✽
NOTICE  
CAUTION  
•
If you install an aftermarket HID  
head lamp, your vehicle’s audio  
and electronic device may mal-  
function.  
Prevent chemicals such as per-  
fume, cosmetic oil, sun cream,  
hand cleaner and air freshener  
from contacting the interior parts  
because they may cause damage  
or discoloration.  
Roof antenna  
■ Type A  
• Before entering a place with a  
low height clearance or a car  
wash, remove surely the  
antenna by rotating it counter-  
clockwise. If not, the antenna  
may be damaged.  
■ Type B  
•
• When reinstalling your anten-  
na, it is important that it is  
fully tightened and adjusted  
to the upright position to  
ensure proper reception. The  
antenna can be folded or  
removed when parking the  
vehicle or when loading cargo  
on the roof rack.  
OLMB043298  
Your car uses a roof antenna to  
receive both AM and FM broadcast  
signals. This antenna is a removable  
type. To remove the antenna, turn it  
counterclockwise. To install the  
antenna, turn it clockwise.  
• When cargo is loaded on the  
roof rack, do not place the  
cargo near the antenna pole  
to ensure proper reception.  
4-2  
CDP mode  
MODE (1)  
Audio remote control  
(if equipped)  
It will function as the TRACK  
UP/DOWN button.  
Press the button to select Radio, CD  
(compact disc), USB or AUX (if  
equipped).  
VOL (+ / -) (3)  
• Press the up button (+) to increase  
volume.  
SEEK (  
/
) (2)  
If the SEEK button is pressed for 0.8  
second or more, it will work as fol-  
lows in each mode.  
• Press the down button (-) to  
decrease volume.  
4
RADIO mode  
MUTE (4)  
It will function as the AUTO SEEK  
select button.  
• Press the MUTE button to cancel  
the sound.  
ODM042327  
❈ The actual feature in the vehicle may differ  
• Press the MUTE button again to  
activate the sound.  
from the illustration.  
CDP mode  
It will function as the FF/REW button.  
The steering wheel audio remote  
control button is installed to promote  
safe driving.  
Detailed information for audio control  
buttons is described in the following  
pages in this section.  
If the SEEK button is pressed for less  
than 0.8 second, it will work as fol-  
lows in each mode.  
CAUTION  
RADIO mode  
Do not operate audio remote  
control buttons simultaneously.  
It will function as the PRESET STA-  
TION select buttons.  
4-3  
Multimedia System  
HOW VEHICLE AUDIO WORKS (FOR EUROPE)  
FM reception  
AM (MW, LW) reception  
FM radio station  
JBM001  
JBM002  
JBM003  
AM broadcasts can be received at FM broadcasts are transmitted at  
cast from transmitter towers located greater distances than FM broad- high frequencies and do not bend to  
AM and FM radio signals are broad-  
around your city. They are intercepted  
by the radio antenna on your vehicle.  
This signal is then received by the radio  
and sent to your vehicle speakers.  
casts.This is because AM radio waves follow the earth's surface. Because  
are transmitted at low frequencies. of this, FM broadcasts generally  
These long, low frequency radio begin to fade at short distances from  
waves can follow the curvature of the the station. Also, FM signals are eas-  
earth rather than travelling straight out ily affected by buildings, mountains,  
into the atmosphere. In addition, they or other obstructions. These can  
curve around obstructions so that they result in certain listening conditions  
When a strong radio signal has  
reached your vehicle, the precise engi-  
neering of your audio system ensures  
the best possible quality reproduction.  
However, in some cases the signal  
coming to your vehicle may not be  
strong and clear.  
can provide better signal coverage.  
which might lead you to believe a  
problem exists with your radio. The  
following conditions are normal and  
do not indicate radio trouble:  
This can be due to factors, such as the  
distance from the radio station, close-  
ness of other strong radio stations or  
the presence of buildings, bridges or  
other large obstructions in the area.  
4-4  
Using a cellular phone or a  
two-way radio  
When a cellular phone is used inside  
the vehicle, noise may be produced  
from the audio system. This does not  
mean that something is wrong with the  
audio equipment. In such a case, use  
the cellular phone at a place as far as  
possible from the audio equipment.  
4
CAUTION  
JBM004  
JBM005  
• Fading - As your vehicle moves • Station Swapping - As a FM signal  
When using a communication  
system such as a cellular phone  
or a radio set inside the vehicle, a  
separate external antenna must  
be fitted. When a cellular phone  
or a radio set is used with an  
internal antenna alone, it may  
interfere with the vehicle's electri-  
cal system and adversely affect  
safe operation of the vehicle.  
away from the radio station, the  
signal will weaken and sound will  
begin to fade. When this occurs,  
we suggest that you select another  
stronger station.  
weakens, another more powerful  
signal near the same frequency  
may begin to play. This is because  
your radio is designed to lock onto  
the clearest signal. If this occurs,  
select another station with a  
stronger signal.  
• Flutter/Static - Weak FM signals or  
large obstructions between the  
transmitter and your radio can dis- • Multi-Path Cancellation - Radio sig-  
turb the signal causing static or  
fluttering noises to occur. Reducing  
the treble level may lessen this  
effect until the disturbance clears.  
nals being received from several  
directions can cause distortion or  
fluttering. This can be caused by a  
direct and reflected signal from the  
same station, or by signals from  
two stations with close frequencies.  
If this occurs, select another station  
until the condition has passed.  
WARNING  
Do not use a cellular phone  
while driving. Stop at a safe  
location to use a cellular phone.  
4-5  
Multimedia System  
CARING FOR DISC  
• If the temperature inside the car is • Depending on the type of CD-R/CD-  
✽
NOTICE  
Order of playing files (folders) :  
too high, open the car windows to  
ventilate before using the system.  
RW CDs, certain CDs may not oper-  
ate normally according to manufac-  
turing companies or making and  
recording methods. In such circum-  
stances, continued use may cause  
malfunctions to your audio system.  
1. Song playing order  
sequentially.  
2. Folder playing order :  
:
to  
• It is illegal to copy and use  
MP3/WMA files without permission.  
Use CDs that are created only by  
lawful means.  
❈
If no song file is contained in the  
folder, that folder is not displayed.  
• Do not apply volatile agents, such as  
benzene and thinner, normal clean-  
ers and magnetic sprays made for  
analogue disc onto CDs.  
✽
NOTICE - Playing an  
Incompatible Copy  
Protected Audio CD  
• To prevent the disc surface from get-  
ting damaged, hold CDs by the  
edges or the center hole only.  
Some copy protected CDs, which do  
not comply with international audio  
CD standards (Red Book), may not  
play on your car audio. Please note  
• Clean the disc surface with a piece  
of soft cloth before playback (wipe it  
from the center to the outside edge).  
that inabilities to properly play  
a
copy protected CD may indicate  
that the CD is defective, not the CD  
player.  
• Do not damage the disc surface or  
attach pieces of sticky tape or paper.  
• Make certain only CDs are inserted  
into the CD player (Do not insert  
more than one CD at a time).  
• Keep CDs in their cases after use to  
protect them from scratches or dirt.  
4-6  
(Continued)  
(Continued)  
WARNING  
• Please refrain from use if the  
screen is blank or no sound  
can be heard as these signs  
may indicate product malfunc-  
tion. Continued use in such  
conditions could lead to acci-  
dents(fires, electric shock) or  
product malfunctions.  
• Driving while distracted can  
result in a loss of vehicle control  
that may lead to an accident,  
severe personal injury, and  
death. The driver’s primary  
responsibility is in the safe and  
legal operation of a vehicle, and  
use of any handheld devices,  
other equipment, or vehicle sys-  
tems which take the driver’s  
eyes, attention and focus away  
from the safe operation of a vehi-  
cle or which are not permissible  
by law should never be used  
during operation of the vehicle.  
• Do not stare at the screen  
while driving. Staring at the  
screen for prolonged periods  
of time could lead to traffic  
accidents.  
• Do not disassemble, assem-  
ble, or modify the audio sys-  
tem. Such acts could result in  
accidents, fire, or electric  
shock.  
• Do not touch the antenna dur-  
ing thunder or lightening as  
such acts may lead to light-  
ning induced electric shock.  
4
• Using the phone while driving  
may lead to a lack of attention  
of traffic conditions and  
increase the likelihood of  
accidents. Use the phone fea-  
ture after parking the vehicle.  
• Do not stop or park in park-  
ing-restricted areas to operate  
the product. Such acts could  
lead to traffic accidents.  
• Use the system with the vehi-  
cle ignition turned on.  
Prolonged use with the igni-  
tion turned off could result in  
battery discharge.  
• Heed caution not to spill water  
or introduce foreign objects  
into the device. Such acts  
could lead to smoke, fire, or  
product malfunction.  
(Continued)  
(Continued)  
4-7  
Multimedia System  
(Continued)  
(Continued)  
CAUTION  
• Turn on the car ignition before  
using this device. Do not oper-  
ate the audio system for long  
periods of time with the ignition  
turned off as such operations  
may lead to battery discharge.  
• Do not place beverages close  
to the audio system. Spilling  
beverages may lead to system  
malfunction.  
• Operating the device while  
driving could lead to acci-  
dents due to a lack of attention  
to external surroundings. First  
park the vehicle before operat-  
ing the device.  
• In case of product malfunc-  
tion, please contact your place  
of purchase or After Service  
center.  
• Do not subject the device to  
severe shock or impact. Direct  
pressure onto the front side of  
the monitor may cause damage  
to the LCD or touch screen.  
• Adjust the volume to levels  
that allow the driver to hear  
sounds from outside of the  
vehicle. Driving in a state  
where external sounds cannot  
be heard may lead to acci-  
dents.  
• Placing the audio system with-  
in an electromagnetic environ-  
ment may result in noise inter-  
ference.  
• When cleaning the device,  
make sure to turn off the  
device and use a dry and  
smooth cloth. Never use tough  
materials, chemical cloths, or  
solvents (alcohol, benzene,  
thinners, etc.) as such materi-  
als may damage the device  
panel or cause color/quality  
deterioration  
• Prevent caustic solutions such  
as perfume and cosmetic oil  
from contacting the dashboard  
because they may cause dam-  
age or discoloration.  
• Pay attention to the volume  
setting when turning the  
device on. A sudden output of  
extreme volume upon turning  
the device on could lead to  
hearing impairment. (Adjust  
the volume to a suitable levels  
before turning off the device.)  
(Continued)  
(Continued)  
4-8  
(Continued)  
(Continued)  
✽
NOTICE - USING THE USB  
DEVICE  
•
Depending on the condition of the  
external USB device, the connect-  
ed external USB device can be  
unrecognizable.  
•
If you disconnect the external USB  
device during playback in USB  
mode, the external USB device can  
be damaged or may malfunction.  
Therefore, disconnect the external  
USB device when the audio is  
turned off or in another mode.  
(e.g, Radio, CD)  
•
To use an external USB device,  
make sure the device is not con-  
nected when starting up the vehi-  
cle. Connect the device after start-  
ing up.  
If you start the engine when the  
USB device is connected, it may  
damage the USB device. (USB  
flashdrives are very sensitive to  
electric shock.)  
If the engine is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
The System may not play inau-  
thentic MP3 or WMA files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps ~ 320Kbps.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps ~ 320Kbps.  
Take precautions for static elec-  
tricity when connecting or discon-  
necting the external USB device.  
An encrypted MP3 PLAYER is  
not recognizable.  
•
When the formatted byte/sector set-  
ting of External USB device is not  
either 512BYTE or 2048BYTE,  
then the device will not be recog-  
nized.  
•
•
•
Depending on the type and capac-  
ity of the external USB device or  
the type of the files stored in the  
device, there is a difference in the  
time taken for recognition of the  
device.  
Do not use the USB device for pur-  
poses other than playing music  
files.  
•
•
Use only a USB device formatted  
to FAT 12/16/32.  
USB devices without USB I/F  
authentication may not be recog-  
nizable.  
4
•
•
•
•
•
Make sure the USB connection  
terminal does not come in contact  
with the human body or other  
objects.  
If you repeatedly connect or dis-  
connect the USB device in a short  
period of time, it may break the  
device.  
•
•
Playing videos through the USB is  
not supported.  
Use of USB accessories such as  
rechargers or heaters using USB  
I/F may lower performance or  
cause trouble.  
You may hear  
a
strange noise  
when connecting or disconnecting  
a USB device.  
(Continued)  
•
•
(Continued)  
(Continued)  
4-9  
Multimedia System  
(Continued)  
(Continued)  
•
If you use devices such as a USB  
hub purchased separately, the  
vehicle’s audio system may not  
recognize the USB device. In that  
•
Some USB flash memory readers  
(such as CF, SD, micro SD, etc.) or  
external-HDD type devices can be  
unrecognizable.  
case,  
connect  
the  
USB  
device  
•
•
Music files protected by DRM  
(DIGITAL RIGHTS MANAGE-  
MENT) are not recognizable.  
The data in the USB memory may  
be lost while using this audio.  
Always back up important data on  
a personal storage device.  
directly to the multimedia termi-  
nal of the vehicle.  
If the USB device is divided by log-  
ical drives, only the music files on  
the highest-priority drive are rec-  
ognized by car audio.  
•
•
Devices  
such  
as  
MP3  
Player/  
•
Please avoid using USB  
Cellular phone/Digital camera can  
be unrecognizable by standard  
USB I/F can be unrecognizable.  
Charging through the USB may  
not be supported in some mobile  
devices.  
USB HDD or USB types liable to  
connection failures due to vehicle  
vibrations are not supported. (i-  
stick type)  
memory  
which can be used as  
key chains or cellular  
phone accessories as  
they could cause damage to the  
USB jack. Please make certain  
only to use plug type connector  
products.  
products  
•
•
•
Some non-standard USB devices  
(METAL COVER TYPE USB)  
can be unrecognizable.  
(Continued)  
4-10  
®
(Continued)  
(Continued)  
✽
NOTICE - USING THE iPod  
DEVICE  
When connecting iPod® with the  
iPod® Power Cable, insert the con-  
nector to the multimedia socket  
completely. If not inserted com-  
pletely, communications between  
iPod® and audio may be interrupt-  
ed.  
•
Some iPod® devices, such as the  
iPhone®, can be connected through  
the Bluetooth® Wireless Technology  
interface. The device must have  
•
•
Some iPod® models may not sup-  
port communication protocol and  
files may not properly play.  
Supported iPod® models:  
audio  
Technology capability (such as for  
stereo headphone  
Bluetooth®  
Wireless Technology). The device  
can play, but it will not be con-  
trolled by the audio system.  
Bluetooth®  
Wireless  
- iPod® Mini  
- iPod® 4th (Photo) ~ 6th (Classic)  
generation  
•
•
When adjusting the sound effects  
of the iPod® and the audio system,  
the sound effects of both devices  
will overlap and might reduce or  
distort the quality of the sound.  
Deactivate (turn off) the equalizer  
function of an iPod® when adjust-  
ing the audio system’s volume, and  
turn off the equalizer of the audio  
system when using the equalizer of  
- iPod® Nano 1st~4th generation  
- iPod® Touch 1st~2nd generation  
The order of search or playback of  
songs in the iPod® can be different  
from the order searched in the  
audio system.  
4
•
•
•
To use iPod® features within the  
audio, use the cable provided upon  
purchasing an iPod®d device.  
•
Skipping or improper operation may  
occur depending on the characteris-  
tics of your iPod®/iPhone® device.  
If your iPhone® is connected to both  
the Bluetooth® Wireless Technology  
and USB, the sound may not be prop-  
erly played. In your iPhone®, select  
the Dock connector or Bluetooth®  
Wireless Technology to change the  
sound output (source).  
•
•
If the iPod® disabled due to its  
own malfunction, reset the iPod®  
(Reset: Refer to iPod® manual)  
.
an iPod®  
.
An iPod® may not operate nor-  
mally on low battery.  
(Continued)  
•
When not using iPod® with car  
audio, detach the iPod® cable from  
iPod®  
.
Otherwise,  
iPod®  
may  
remain in accessory mode, and  
may not work properly.  
(Continued)  
4-11  
Multimedia System  
■ CD Player (for RDS model) : AC200TMEE, AC210TMEE  
❋ No  
logo will be shown if the Bluetooth® Wireless Technology feature is not supported.  
4-12  
■ CD Player : AC100TMEG, AC110TMEG, AC100TMEE, AC110TMEE  
4
❋ No  
logo will be shown if the Bluetooth® Wireless Technology feature is not supported.  
4-13  
Multimedia System  
SYSTEM CONTROLLERS AND FUNCTIONS (FOR RDS MODEL)  
SEEK  
TRACK  
❈ Display and settings may differ  
depending on the selected audio.  
RADIO  
2.  
5.  
• Changes to FM/AM mode.  
• Radio Mode : Automatically search-  
es for broadcast frequencies.  
• CD, USB, iPod®, My Music modes  
- Shortly press the key (under 0.8  
seconds): Moves to next or previ-  
ous song (file)  
• Each time the key is pressed,the  
mode is changed in order of FM1 ➟  
FM2 ➟ FMA ➟ AM ➟ AMA.  
Audio Head Unit  
(For RDS model)  
MEDIA  
3.  
• Changes to CD, USB(iPod®), AUX,  
My Music, BT Audio mode.  
• Each time the key is pressed, the  
mode is changed in order of CD,  
USB(iPod®), AUX, My Music, BT  
Audio.  
- Press and hold the key (over 0.8  
seconds): Rewinds or fast-for-  
wards the current song.  
6. PWR/VOL knob  
•
Power Knob: Turns power  
On/Off by pressing the knob  
Volume Knob: Sets volume by  
turning the knob left/right  
PHONE  
4.  
(if equipped)  
•
• Operates Phone Screen  
❈ When a phone is not connected,  
the connection screen is displayed.  
1.  
(EJECT)  
• Ejects the disc.  
4-14  
SETUP  
CLOCK  
8.  
10.  
• Each time the button is shortly  
pressed (under 0.8 seconds), sets  
screen Off ➟ Screen On ➟ Screen  
Off  
• Shortly press the key (under 0.8  
seconds) : Moves to the Display,  
Sound, Clock, Phone, System set-  
ting modes  
❈ Audio operation is maintained and  
only the screen will be turned Off.  
In the screen Off state, press any  
key to turn the screen On again.  
• Press and hold the key (over 0.8  
seconds) : Move to the Time setting  
screen  
MENU  
11.  
Displays menus for the current  
mode.  
4
TA  
SCAN  
9.  
• Radio Mode  
1
6
7.  
(Preset)  
~
❈ iPod® List : Move to parent category  
- Shortly press the key (under  
0.8seconds): TA On/Off  
• Radio Mode: Saves frequencies  
(channels) or receives saved fre-  
quencies (channels)  
PTY  
- Press and hold the key (over  
0.8seconds): Previews each broad-  
cast for 5 seconds each.  
12.  
• FM : RDS Program Type Search  
FOLDER  
• CD, USB, iPod®, My Music mode  
1
RPT  
-
-
: Repeat  
: Random  
• CD MP3, USB mode : Folder  
Search  
2
RDM  
• Media mode  
- Press and hold the key (over  
0.8seconds): Previews each song  
(file) for 10 seconds each.  
❈ Press and holding the key again to  
continue listening to the current  
song (file).  
• In the Radio, Media, Setup, and  
Menu pop up screen, the number  
menu is selected.  
4-15  
Multimedia System  
13.  
TUNE knob  
• Radio mode : Changes frequency  
by turning the knob left/right  
• CD, USB, iPod®, My Music mode:  
Searches .songs (files) by turning  
the knob left/right  
❈ When the desired song is dis-  
played, press the knob to play the  
song.  
• Moves focus in all selection menus  
and selects menus  
FM  
14.  
• Changes to FM mode.  
• Each time the key is pressed, the  
mode changed in order of FM1 ➟  
FM2 ➟ FMA.  
AM  
15.  
• Changes to AM mode.  
• Each time the key is pressed, the  
mode changed in order of AM ➟  
AMA.  
4-16  
SYSTEM CONTROLLERS AND FUNCTIONS  
SEEK  
TRACK  
❈ Display and settings may differ  
depending on the selected audio.  
RADIO  
2.  
5.  
• Changes to FM/AM mode.  
• Each time the key is pressed,the  
mode is changed in order of FM1 ➟  
FM2 ➟ AM.  
• Radio Mode : Automatically search-  
es for broadcast frequencies.  
• CD, USB, iPod®, My Music modes  
- Shortly press the key (under 0.8  
seconds): Moves to next or previ-  
ous song (file)  
Audio Head Unit  
MEDIA  
3.  
• Changes to CD, USB(iPod®), AUX,  
My Music, BT Audio mode.  
- Press and hold the key (over 0.8  
seconds): Rewinds or fast-for-  
wards the current song.  
4
• Each time the key is pressed, the  
mode is changed in order of CD,  
USB(iPod®), AUX, My Music, BT  
Audio mode.  
6. PWR/VOL knob  
•
Power Knob:Turns power On/Off  
by pressing the knob  
PHONE  
4.  
(if equipped)  
•
Volume Knob: Sets volume by  
turning the knob left/right  
• Operates Phone Screen  
❈ When a phone is not connected,  
the connection screen is displayed.  
1.  
(EJECT)  
• Ejects the disc.  
4-17  
Multimedia System  
SETUP  
CLOCK  
8.  
10.  
• Each time the button is shortly  
pressed (under 0.8 seconds), sets  
screen Off ➟ Screen On ➟ Screen  
Off  
• Shortly press the key (under 0.8  
seconds) : Moves to the Display,  
Sound, Clock, Phone, System set-  
ting modes  
❈ Audio operation is maintained and  
only the screen will be turned Off.  
In the screen Off state, press any  
key to turn the screen On again.  
• Press and hold the key (over 0.8  
seconds) : Move to the Time setting  
screen  
MENU  
11.  
Displays menus for the current  
mode.  
SCAN  
9.  
• Radio Mode  
1
6
7.  
(Preset)  
~
❈ iPod® List : Move to parent category  
- Press the key (under 0.8 sec-  
onds): Previews each broadcast  
for 5 seconds each  
• Radio Mode: Saves frequencies  
(channels) or receives saved fre-  
quencies (channels)  
FOLDER  
12.  
• CD MP3, USB mode : Folder  
Search  
• CD, USB, iPod®, My Music mode  
• CD, USB, My Music mode  
- Press the key (under 0.8 sec-  
onds): Previews each song (file)  
for 10 seconds each  
1
RPT  
-
-
: Repeat  
: Random  
2
RDM  
• In the Radio, Media, Setup, and  
Menu pop up screen, the number  
menu is selected.  
❈ Press the key again to continue  
listening to the current song (file).  
4-18  
13.  
TUNE knob  
• Radio mode : Changes frequency  
by turning the knob left/right  
• CD, USB, iPod®, My Music mode:  
Searches songs (files) by turning  
the knob left/right  
❈ When the desired song is dis-  
played, press the knob to play the  
song.  
• Moves focus in all selection menus  
and selects menus  
4
FM  
14.  
• Changes to FM mode.  
• Each time the key is pressed, the  
mode changed in order of FM1 ➟  
FM2.  
AM  
15.  
• Changes to AM mode.  
4-19  
Multimedia System  
SETUP (FOR RDS MODEL) - AC200TMEE, AC210TMEE  
Mode Pop up  
Scroll text  
[Scroll text] Set  
On  
Display Settings  
On  
On  
Off  
[Mode Pop up] Changes  
selection mode  
.
/
SETUP  
CLOCK  
•
•
: Maintains scroll  
Press the  
[Display] through  
key Select  
RADIO  
• During On state, press the  
MEDIA  
Off  
: Scrolls only one (1) time.  
TUNE knob or  
or  
change pop up screen.  
key to display the mode  
1
RPT  
key Select menu through  
Song Info  
TUNE knob  
• When the pop up screen is dis-  
played, use the  
When playing an MP3 file, select the  
desired display info from ‘Folder/File’  
or ‘Album/Artist/Song’.  
TUNE knob or  
to select the  
1
6
keys  
desired mode.  
~
4-20  
Audio Settings  
Speed Dependent Volume  
Control  
Sound Settings  
This menu allows you to set the  
‘Bass, Middle, Treble’ and the Sound This feature is used to automatically  
Fader and Balance.  
Select [Audio Settings]  
menu through  
TUNE knob left/right to set  
SETUP  
CLOCK  
Press the  
[Sound] through  
key Select  
TUNE knob or  
key Select menu through  
control the volume level according to  
the speed of the vehicle.  
2
RDM  
Select  
TUNE knob Turn  
Select [Speed Dependent Vol.] Set  
in 4 levels [Off/Low/Mid/High] of  
TUNE knob  
TUNE knob  
• Bass, Middle, Treble : Selects the  
sound tone.  
4
• Fader, Balance : Moves the sound  
fader and balance.  
• Default : Restores default settings.  
❈ Return : While adjusting values,  
re-pressing the TUNE knob will  
restore the parent menu.  
4-21  
Multimedia System  
Clock Settings  
Day Settings  
Clock Settings  
This menu is used to set the time.  
This menu is used to set the date.  
SETUP  
CLOCK  
Select [Clock Settings] Set through Select [Day Settings] Set through  
TUNE knob Press TUNE knob TUNE knob Press TUNE knob  
Press the  
[Clock] through  
key Select  
TUNE knob or  
3
key Select menu through  
TUNE knob  
❈ Adjust the number currently in ❈ Adjust the number currently in  
focus to set the [hour] and press  
the tune knob to set the [minute].  
focus to make the settings and  
press the tune knob to move to the  
next setting. (Set in order of  
Year/Month/Day)  
4-22  
Time Format  
Automatic RDS Time  
This function is used to set the 12/24 This option is used to automatically  
hour time format of the audio system. set the time by synchronizing with  
RDS.  
Select [Time Format] Set 12Hr /  
24Hr through  
TUNE knob  
Select [Automatic RDS Time] Set  
On  
Off  
/
through  
TUNE knob  
On  
Off  
•
•
: Turn on Automatic Time  
: Turn off.  
Clock Display when Power is  
OFF  
Select [Clock Disp.(Pwr Off) Set  
On  
Off  
4
/
through  
TUNE knob  
On  
Off  
•
•
: Displays time/date on screen  
: Turn off.  
4-23  
Multimedia System  
Memory Information  
(if equipped)  
Language  
System Settings  
This menu is used to set the display  
Displays currently used memory and and voice recognition language.  
total system memory.  
SETUP  
CLOCK  
Press the  
key Select [System]  
Select [Language] Set through  
TUNE knob  
Select [Memory Information] OK  
The currently used memory is dis-  
played on the left side while the total  
system memory is displayed on the  
right side.  
❈ The system will reboot after the  
language is changed.  
❈ Language support by region  
-
4-24  
SETUP - AC100TMEG, AC110TMEG, AC100TMEE, AC110TMEE  
Mode Pop up  
Song Info  
Display Settings  
On  
[Mode Pop up] Changes  
selection mode  
.
When playing an MP3 file, select the  
desired display info from ‘Folder/File’  
or ‘Album/Artist/Song’.  
SETUP  
CLOCK  
Press the  
[Display] through  
key Select  
TUNE knob or  
key Select menu through  
RADIO  
• During On state, press the  
MEDIA  
1
RPT  
or  
change pop up screen.  
key to display the mode  
TUNE knob  
• When the pop up screen is dis-  
played, use the  
TUNE knob or  
to select the  
1
6
keys  
desired mode.  
~
4
Scroll text  
[Scroll text] Set  
On  
On  
Off  
/
•
•
: Maintains scroll  
Off  
: Scrolls only one (1) time.  
4-25  
Multimedia System  
Audio setting  
Speed Dependent Volume  
Control  
Sound Settings  
This menu allows you to set the  
‘Bass, Middle, Treble’ and the Sound This feature is used to automatically  
Fader and Balance.  
Select [Sound Settings] Select  
menu through  
TUNE knob left/right to set  
SETUP  
CLOCK  
Press the  
[Sound] through  
key Select  
TUNE knob or  
key Select menu through  
control the volume level according to  
the speed of the vehicle.  
2
RDM  
TUNE knob Turn  
Select [Speed Dependent Vol.] Set  
in 4 levels [Off/Low/Mid/High] of  
TUNE knob  
TUNE knob  
• Bass, Middle, Treble : Selects the  
sound tone.  
• Fader, Balance : Moves the sound  
fader and balance.  
• Default : Restores default settings.  
❈ Return : While adjusting values,  
re-pressing the TUNE knob will  
restore the parent menu.  
4-26  
Clock Settings  
Time Format  
Clock Settings  
This menu is used to set the time.  
This function is used to set the 12/24  
hour time format of the audio system.  
SETUP  
CLOCK  
Select [Clock Settings] Set through  
TUNE knob Press TUNE knob Select [Time Format] Set 12Hr /  
24Hr through TUNE knob  
Press the  
[Clock] through  
key Select  
TUNE knob or  
3
key Select menu through  
TUNE knob  
Clock Display when Power is  
OFF  
Select [Clock Disp.(Pwr Off) Set  
On  
4
Off  
/
through  
TUNE knob  
❈ Adjust the number currently in  
focus to set the [hour] and press  
the tune knob to set the [minute].  
On  
Off  
•
•
: Displays time/date on screen  
: Turn off.  
Day Settings  
This menu is used to set the date.  
Select [Day Settings] Set through  
TUNE knob Press  
TUNE knob  
❈ Adjust the number currently in  
focus to make the settings and  
press the tune knob to move to the  
next setting. (Set in order of  
Year/Month/Day)  
4-27  
Multimedia System  
SETUP  
CLOCK  
Pair Phone  
Phone Setup (if equipped)  
Press the  
key Select [Phone]  
(for RDS model)  
SETUP  
CLOCK  
CAUTION  
Press the  
key Select [Phone]  
To pair a Bluetooth® Wireless  
Technology enabled mobile  
phone, authentication and con-  
nection processes are first  
required. As a result, you can-  
not pair your mobile phone  
while driving the vehicle. First  
park your vehicle before use.  
Select [Pair Phone] Set through  
TUNE knob  
➀ Search for device names as dis-  
played on your mobile phone and  
connect.  
➁ Input the passkey displayed on the  
screen. (Passkey : 0000)  
❈ The device name and passkey will  
be displayed on the screen for up  
to 3 minutes. If pairing is not com-  
pleted within the 3 minutes, the  
mobile phone pairing process will  
automatically be canceled.  
4-28  
➂ Pairing completion is displayed.  
• Connecting a phone  
Phone List  
❈ In some mobile phones, pairing  
will automatically be followed by  
connection.  
Select [Phone List] Select mobile  
phone through TUNE knob  
Select [Connect Phone]  
The names of up to 5 paired phones  
will be displayed.  
❈ It is possible to pair up to five  
®
Bluetooth Wireless Technology  
enabled mobile phones.  
4
A [ ] is displayed in front of the cur-  
rently connected phone.  
➀ Select a mobile phone that is not  
currently connected.  
Select the desired name to setup the  
selected phone.  
➁ Connect the selected mobile  
phone.  
➂ Connection completion is dis-  
played.  
❈ If a phone is already connected,  
disconnect the currently connect-  
ed phone and select a new phone  
to connect.  
4-29  
Multimedia System  
• Disconnecting a connected phone  
Select [Phone List] Select mobile  
phone through TUNE knob  
Select [Disconnect Phone]  
• Changing connection sequence  
(Priority)  
- The connected phone will auto-  
matically be changed to No. 1 pri-  
ority.  
This is used to change the order (pri-  
ority) of automatic connection for the  
paired mobile phones.  
• Delete  
Select [Phone List] Select mobile  
Select [Phone List] Select [Priority]  
through TUNE knob Select No. 1  
Priority mobile phone  
phone through  
Select [Delete]  
TUNE knob  
➀ Select the desired mobile phone.  
➁ Delete the selected mobile phone.  
➂ Deletion completion is displayed.  
➀ Select [Priority].  
➁ From the paired phones, select  
the phone desired for No.1 priority.  
➀ Select the currently connected  
mobile phone.  
❈ When attempting to delete a cur-  
rently connected phone, the  
phone is first disconnected.  
➂ The changed priority sequence is  
displayed.  
➁ Disconnect the selected mobile  
phone.  
❈ Once the connection sequence  
(priority) is changed, the new no. 1  
priority mobile phone will be con-  
nected.  
➂ Disconnection completion is dis-  
played.  
CAUTION  
• When you delete a mobile  
phone, the mobile phone con-  
tacts will also be erased.  
• For stable Bluetooth® Wireless  
Technology communication,  
delete the mobile phone from  
the audio and also delete the  
audio from your mobile phone.  
- when the no. 1 priority cannot be  
connected: Automatically attempts  
to connect the most recently con-  
nected phone.  
- Cases when the most recently  
connected phone cannot be con-  
nected: Attempts to connect in the  
order in which paired phones are  
listed.  
4-30  
Contacts Download  
Phone book Download  
(for RDS model)  
Auto Download  
This feature is used to download When connecting a mobile phone, it  
contacts and call histories into the This feature is used to download is possible to automatically download  
audio system.  
phone book and call histories into new Contacts and Call Histories.  
the audio system.  
On  
Select [Contacts Download] Select  
through  
Select [Auto Download] Set  
Off  
/
TUNE knob  
Select [Phone book Download]  
Select through  
through  
TUNE knob  
TUNE knob.  
CAUTION  
CAUTION  
• The download feature may not  
be supported in some mobile  
phones.  
4
• The download feature may not  
be supported in some mobile  
phones.  
• If a different operation is per-  
formed while Contacts are  
being downloaded, download-  
ing will be discontinued.  
• If a different operation is per-  
formed while phone book is  
being downloaded, download-  
ing will be discontinued. Phone  
book already downloaded will  
be saved.  
Contacts already downloaded  
will be saved.  
• When  
downloading  
new  
Contacts, delete all previously  
saved Contacts before start-  
ing download.  
• When downloading new phone  
book, delete all previously  
saved phone book before start-  
ing download.  
4-31  
Multimedia System  
Bluetooth® Wireless Technology  
System Off  
Audio Streaming  
Outgoing Volume  
Songs (files) saved in your This is used to set the volume of your  
®
Bluetooth  
enabled mobile phone can be played while on a Bluetooth Wireless  
Wireless Technology voice as heard by the other party  
®
This feature is used when you do not  
®
wish to use the Bluetooth Wireless  
Technology system.  
through the audio system.  
Technology enabled handsfree call.  
Select [Outgoing Volume] Set vol-  
On  
Select [Audio Streaming] Set  
Off  
/
Select [Bluetooth System Off] Set  
through  
through  
TUNE knob  
ume through  
TUNE knob  
TUNE knob  
❈ While on a call, the volume can be  
SEEK  
TRACK  
❈ If a phone is already connected,  
disconnect the currently connect-  
changed by using the  
key.  
CAUTION  
®
ed phone and turn the Bluetooth  
Wireless Technology system off.  
The  
Bluetooth®  
Wireless  
Technology audio streaming  
feature may not be supported in  
some mobile phones.  
4-32  
®
• Turning On Bluetooth Wireless  
Using the Bluetooth® Wireless  
Technology System  
SETUP  
CLOCK  
CAUTION  
Technology through the  
Key  
®
Bluetooth® Wireless Technology  
connection may become inter-  
mittently disconnected in some  
mobile phones. Follow these  
next steps to try again.  
1) Turn the Bluetooth® Wireless  
Technology function within  
the mobile phone ON/OFF  
and try to connect again.  
To  
use  
Bluetooth  
Wireless  
SETUP  
CLOCK  
Press the  
[Phone]  
key Select  
Technology when the system is cur-  
rently off, follow these next steps.  
➀ A screen asking whether to turn on  
®
Bluetooth Wireless Technology will  
be displayed.  
®
• Turning On Bluetooth Wireless  
PHONE  
Technology through the  
PHONE  
Key  
YES  
➁ On the screen, select  
®
to turn  
on Bluetooth Wireless Technology  
Press the  
Guidance  
key Screen  
4
and display guidance.  
❈ Moves to the screen where  
®
Bluetooth Wireless Technology  
®
2) Turn the mobile phone power  
ON/OFF and try to connect  
again.  
❈ If  
the  
Bluetooth  
Wireless  
Technology system is turned on, the  
system will automatically try to con-  
nect the most recently connected  
functions can be used and dis-  
plays guidance.  
3) Completely  
remove  
the  
®
mobile phone battery, reboot,  
and then try to connect  
again.  
Bluetooth Wireless Technology  
mobile phone.  
4) Reboot the audio system and  
try to connect again  
5) Delete all paired devices in  
your mobile phone and the  
audio system and pair again  
for use.  
4-33  
Multimedia System  
Memory Information  
(if equipped)  
Language  
System Settings  
SETUP  
CLOCK  
This menu is used to set the display  
Displays currently used memory and and voice recognition language.  
total system memory.  
Press the  
[System]  
key Select  
Select [Language] Set through  
TUNE knob  
Select [Memory Information] OK  
The currently used memory is dis-  
played on the left side while the total  
system memory is displayed on the  
right side.  
❈ The system will reboot after the  
language is changed.  
❈ Language support by region  
-
4-34  
RADIO (FOR RDS MODEL)  
Changing RADIO mode  
Preset SEEK  
Selecting through manual  
search  
1
6
Press the  
~
key  
Turn the  
adjust the frequency.  
TUNE knob left/right to  
• Shortly pressing the key (under 0.8  
seconds): Plays the frequency  
saved in the corresponding key.  
• AC200TMEE, AC210TMEE  
- FM : Changes by 50KHz  
- AM : Changes by 9khz  
• Pressing and holding the key (over  
0.8 seconds): Pressing and holding  
1
6
the desired key from  
~
will save the currently playing  
broadcast to the selected key and  
sound a BEEP.  
SEEK  
Traffic Announcement (TA)  
TA  
SEEK  
TRACK  
4
Press the  
key  
Shortly pressing the  
(under 0.8 seconds): Set  
key  
Off  
SCAN  
• Shortly pressing the key (under 0.8  
seconds): Changes the frequency.  
• Pressing and holding the key (over  
0.8 seconds): Automatically search-  
es for the next frequency.  
On  
/
TA Traffic Announcement) mode.  
SCAN  
TA  
SCAN  
Press the  
key  
• Pressing and holding the key (over PTY Up/Down  
0.8 seconds): The broadcast fre-  
quency increases and previews  
each broadcast for 5 seconds each.  
After scanning all frequencies,  
returns and plays the current  
broadcast frequency.  
PTY  
FOLDER  
• Press the  
key when  
searching PTY in RDS Broadcasting  
Program Type selection.  
4-35  
Multimedia System  
AF (Alternative Frequency)  
MENU  
Info Volume  
MENU  
MENU  
Press the  
through  
key Set [ AF]  
key.  
Within  
(Auto Store) and Info functions.  
key are the A.Store  
Info Volume refers to the sound vol-  
ume upon receiving News or Traffic  
information.  
2
RDM  
TUNE knob or  
The Alternative Frequency option  
can be turned On/Off.  
The info volume can be controlled by  
turning the VOL knob left/right while  
a news or traffic broadcast is playing.  
Region  
❈ AF, Region, and News are RDS  
Radio menus.  
MENU  
Press the  
Region] through  
key Set [  
TUNE knob or  
3
key.  
AST (Auto Store)  
The Region option can be turned  
On/Off.  
MENU  
Press the  
through  
key Set [ AST]  
key.  
1
RPT  
TUNE knob or  
News  
Select AST (Auto Store) to save fre-  
quencies with superior reception to  
MENU  
Press the  
through  
key Set [ News]  
4
1
6
presets  
~
. If no frequen-  
TUNE knob or  
key.  
cies are received, then the most  
recently received frequency will be  
broadcast.  
The News option can be turned  
On/Off.  
❈ Saves only to the Preset memory  
1
6
~
of FMA or AMA mode.  
4-36  
RADIO  
Changing RADIO mode  
Preset SEEK  
SCAN  
1
6
SCAN  
Press the key  
Press the  
~
key  
• Shortly pressing the key (under 0.8 • Shortly pressing the key (under 0.8  
seconds): Plays the frequency  
saved in the corresponding key.  
seconds): The broadcast frequen-  
cy increases and previews each  
broadcast for 5 seconds each.  
After scanning all frequencies,  
returns and plays the current  
broadcast frequency.  
• Pressing and holding the key (over  
0.8 seconds): Pressing and holding  
1
6
the desired key from  
will save the currently playing  
~
broadcast to the selected key and • Pressing and holding the key (over  
sound a BEEP. 0.8 seconds): Previews the broad-  
SEEK  
4
SEEK  
TRACK  
Press the  
key  
1
6
casts saved in Preset  
for 5 seconds each.  
~
• Shortly pressing the key (under 0.8  
seconds): Changes the frequency.  
• Pressing and holding the key (over  
0.8 seconds): Automatically search-  
es for the next frequency.  
4-37  
Multimedia System  
Selecting through manual  
search  
MENU  
MENU  
Within  
TUNE knob left/right to (Auto Store) and Info functions.  
key are the A.Store  
Turn the  
adjust the frequency.  
• AC100TMEE, AC110TMEE  
- FM : Changes by 50KHz  
- AM : Changes by 9khz  
• AC100TMEG, AC110TMEG  
- FM : Changes by 100KHz  
- AM : Changes by 9khz  
AST (Auto Store)  
MENU  
Press the  
through  
key Set [ AST]  
key.  
1
RPT  
TUNE knob or  
Select AST (Auto Store) to save fre-  
quencies with superior reception to  
1
6
presets  
~
. If no frequen-  
cies are received, then the most  
recently received frequency will be  
broadcast.  
4-38  
BASIC METHOD OF USE : AUDIO CD / MP3 CD / USB / IPOD® / MY MUSIC  
MEDIA  
Press the  
key to change the  
Repeat  
modmodeinorderofCD➟USB(iPod®)  
➟ AUX ➟ My Music ➟ BT Audio.  
1
RPT  
While song (file) is playing  
(RPT) key  
The folder/file name is displayed on  
the screen.  
Audio CD, MP3 CD, USB, iPod®, My  
Music mode: RPT on screen  
• To repeat one song (Shortly press-  
ing the key (under 0.8 seconds)):  
Repeats the current song.  
MP3 CD, USB mode: FLD.RPT on  
screen  
<USB>  
4
• To repeat folder (pressing twice):  
repeats all files within the current  
folder.  
<Audio CD>  
<My Music>  
1
RPT  
❈ Press the  
off repeat.  
key again to turn  
❈ The CD is automatically played  
when a CD is inserted.  
❈ The USB music is automatically  
played when a USB is connected.  
<CD MP3>  
4-39  
Multimedia System  
Random  
Changing Song/File  
Scan (for RDS model)  
SEEK  
TRACK  
TA  
SCAN  
2
RDM  
While song (file) is playing  
(RDM) key  
While song (file) is playing  
key  
While song (file) is playing  
key  
• Shortly pressing the key: Plays the • Pressing and holding the key (over  
current song from the beginning.  
Audio CD, My Music mode: RDM on  
screen  
0.8 seconds) : Scans all songs for  
10 seconds starting from the next  
song.  
SEEK  
❈ If the  
TRACK key is pressed  
• Random (Shortly pressing the key ):  
Plays all songs in random order.  
again within 1 second, the previ-  
ous song is played.  
TA  
SCAN  
❈ Pressing and holding the  
key again to turn off.  
MP3 CD, USB mode: FLD.RDM on  
screen  
• Pressing and holding the key (over  
0.8 seconds): Rewinds the song.  
SEEK  
• Folder Random (Shortly pressing  
the key): Plays all files within the  
current folder in random order.  
Scan  
While song (file) is playing  
TRACK  
key  
SCAN  
While song (file) is playing  
key  
• Shortly pressing the key: Plays the  
next song.  
MP3 CD, USB mode: RDM on  
screen  
• Shortly pressing the key (under 0.8  
seconds) : Scans all songs from  
the next song for 10 seconds each.  
• Pressing and holding the key (over  
0.8 seconds): Fast forwards the  
song.  
• Random (pressing twice): Plays all  
files in random order.  
iPod® mode: RDM on screen  
• Random (press the key) : Plays all  
files in random order.  
SCAN  
❈ Press the  
off.  
key again to turn  
❈ The SCAN function is not support-  
ed in iPod® mode.  
2
RDM  
❈ Press the  
off random.  
key again to turn  
4-40  
Information  
Folder Search : MP3 CD, USB  
Mode  
MENU : Audio CD  
MENU  
Press the  
through the  
key to display information of the cur-  
rent song.  
key Set [ Info]  
3
MENU  
Press the CD MP3 mode  
to set the Repeat, Random,  
Information features.  
key  
PTY  
TUNE knob or  
While file is playing  
FOLDER  
/
FOLDER  
(Folder Up) key  
MENU  
❈ Press the  
info display.  
key to turn off  
• Searches the next folder.  
I
PTY  
FOLDER  
While file is playing  
FOLDER  
/
(Folder Down) key  
4
• Searches the parent folder.  
❈ If a folder is selected by pressing  
the TUNE knob, the first file  
Repeat  
MENU  
Press the  
through the  
key Set [ RPT]  
1
RPT  
TUNE knob or  
key to repeat the current song.  
within the selected folder will be  
played.  
❈ Press RPT again to turn off.  
Searching Songs (File)  
Random  
• Turning TUNE knob : Searches  
for songs (files)  
MENU  
Press the  
through the  
key to randomly play songs within  
the current folder.  
key Set [ RDM]  
TUNE knob or  
2
RDM  
• Pressing TUNE knob : Plays  
selected song (file).  
❈ Press RDM again to turn off.  
4-41  
Multimedia System  
Folder Repeat  
Copy  
MENU : MP3 CD / USB  
MENU  
MENU  
Press the  
through the  
key Set [ F.RPT]  
3
Press the  
through the  
key.  
key Set [ Copy]  
6
MENU  
Press the CD MP3 mode  
key  
TUNE knob or  
key to repeat songs within the cur-  
rent folder.  
TUNE knob or  
to set the Repeat, Folder Random,  
Folder Repeat, All Random,  
Information, and Copy features.  
This is used to copy the current  
song into My Music. You can play  
the copied Music in My Music  
mode.  
❈ Press F.RPT again to turn off.  
All Random  
I
❈ If another key is pressed while  
copying is in progress, a pop up  
asking you whether to cancel  
copying is displayed.  
MENU  
Press the  
A.RDM] through the  
key Set [  
TUNE knob  
key to randomly play all  
4
or  
songs within the CD.  
❈ If another media is connected or  
inserted (USB, CD, iPod®, AUX)  
while copying is in progress, copy-  
ing is canceled.  
❈ Press A.RDM again to turn off.  
Repeat  
MENU  
Press the  
through the  
key Set [ RPT]  
1
RPT  
TUNE knob or  
key to repeat the current song.  
Information  
MENU  
Press the  
through the  
key Set [ Info]  
5
❈ Music will not be played while  
copying is in progress.  
❈ Press RPT again to turn off.  
TUNE knob or  
key to display information of the cur-  
rent song.  
Folder Random  
MENU  
MENU  
key to turn off  
Press the  
F.RDM] through the TUNE knob or  
key Set [  
❈ Press the  
info display.  
2
RDM  
key to randomly play songs  
within the current folder.  
❈ Press F.RDM again to turn off.  
4-42  
®
Random  
Search  
MENU : iPod  
In iPod® mode, press the  
MENU  
MENU  
Press the  
through the  
key.  
key Set [ RDM] Press the  
TUNE knob or  
key Set [  
TUNE knob  
MENU  
key to  
set the Repeat, Random, Information  
and Search features.  
2
RDM  
Search] through the  
4
or  
key.  
Plays all songs within the currently Displays iPod® category list.  
❈ Searching iPod® category is  
playing category in random order.  
MENU  
❈ Press RDM again to turn off.  
key pressed, move to parent cate-  
gory.  
Information  
4
MENU  
Press the  
through the  
key.  
key Set [ Info]  
3
TUNE knob or  
Repeat  
MENU  
Press the  
through the  
key Set [ RPT]  
1
RPT  
Displays information of the current  
song.  
TUNE knob or  
key to repeat the current song.  
MENU  
❈ Press the  
info display.  
key to turn off  
❈ Press RPT again to turn repeat  
off.  
4-43  
Multimedia System  
Random  
Delete  
MENU : My Music Mode  
(if equipped)  
MENU  
MENU  
key Set [ Delete]  
Press the  
through the  
key.  
key Set [ RDM] Press the  
TUNE knob or  
2
RDM  
4
through the  
key.  
TUNE knob or  
MENU  
In My Music mode, press the  
Plays all songs in random order.  
Deletes currently playing file  
key to set the Repeat, Random,  
Information, Delete, Delete All, and  
Delete Selection features.  
❈ Press RDM again to turn random  
off.  
In the play screen, pressing delete  
will delete the currently playing  
song.  
Deletes file from list  
Information  
MENU  
Press the  
through the  
key.  
key Set [ Info]  
3
TUNE knob or  
Displays information of the current  
song.  
Repeat  
MENU  
key to turn off  
MENU  
❈ Press the  
info display.  
Press the  
through the  
key.  
key Set [ RPT]  
TUNE knob or  
➀ Select the file you wish to delete  
by using the  
1
RPT  
TUNE knob.  
MENU  
➁ Press the  
key and select  
Repeats the currently playing song.  
the delete menu to delete the  
selected file.  
❈ Press RPT again to turn repeat off.  
4-44  
MENU  
➁ After selecting, press the  
key and select the delete menu.  
Delete All  
AUX  
MENU  
Press the  
through the  
key.  
key Set [ Del.All]  
5
AUX is used to play external MEDIA  
currently connected with the AUX  
terminal.  
TUNE knob or  
Deletes all songs of My Music.  
AUX mode will automatically start  
when an external device is connect-  
ed with the AUX terminal.  
Delete Selection  
If an external device is connected,  
MEDIA  
MENU  
Press the  
Del.Sel] through the  
key Set [  
TUNE knob  
you can also press the  
change to AUX mode.  
key to  
✽
NOTICE - Using the My  
Music  
4
6
or  
key.  
Songs within My Music are selected  
and deleted.  
•
Even if memory is available,  
maximum of 6,000 songs can be  
stored.  
The same song can be copied up to  
1,000 times.  
Memory info can be checked in  
the System menu of Setup.  
a
➀ Select the songs you wish to  
delete from the list.  
•
•
❈ AUX mode cannot be started  
unless there is an external device  
connected to the AUX terminal.  
✽
NOTICE - USING THE AUX  
Fully insert the AUX cable into the  
AUX terminal for use.  
4-45  
Multimedia System  
BLUETOOTH® WIRELESS TECHNOLOGY AUDIO (IF EQUIPPED)  
®
What is Bluetooth® Wireless  
Technology?  
• The Bluetooth word mark and  
logos are registered trademarks  
®
Starting Bluetooth Wireless  
Technology Audio  
®
owned by Bluetooth SIG, Inc. and  
®
Bluetooth  
Wireless Technology  
MEDIA  
• Press the  
key to change the  
any use of such marks is under  
license. Other trademarks and trade  
names are those of their respective  
allows devices to be connected in a  
short distance, including hands-free  
devices, stereo headsets, wireless  
remote controllers, etc. For more  
information, visit the Bluetooth  
Wireless Technology website at  
www.Bluetooth.com  
mode in order of CD ➟ USB ➟ AUX  
➟ My Music ➟ BT Audio.  
®
• If BT Audio is selected, Bluetooth  
Wireless Technology audio will start  
playing.  
®
owners. A Bluetooth enabled cell  
®
phone is required to use Bluetooth  
Wireless Technology  
®
❈ Audio may not automatically start  
playing in some mobile phones.  
®
• Bluetooth Wireless Technology  
audio can be used only when the  
[Audio Streaming] of Phone is  
turned On.  
®
Before using Bluetooth Wireless  
Technology audio features  
®
• Bluetooth Wireless Technology  
audio may not be supported  
depending on the compatibility of  
®
your Bluetooth WirelessTechnology  
®
Using the Bluetooth Wireless  
Technology audio features  
®
❈ Setting Bluetooth  
Wireless  
Technology Audio Streaming :  
• Play / Pause  
SETUP  
CLOCK  
Press the  
key Select  
Press the TUNE knob to play and  
pause the current song.  
[Phone] through the tune knob  
Select [Audio Streaming] through  
the TUNE knob Set  
mobile phone.  
• In order to use Bluetooth Wireless  
On  
Off  
/
®
Technology audio, you must first  
®
pair and connect the Bluetooth  
Wireless Technology mobile phone.  
❈ The previous song / next song /  
play / pause functions may not be  
supported in some mobile phones.  
4-46  
• Check call history and making call  
Making a call using the Steering  
wheel remote controller  
Phone (if equipped)  
Before using the Bluetooth® Wireless  
➀ Shortly press (under 0.8 seconds)  
the key on the steering  
remote controller.  
Technology phone features  
➁ The call history list will be dis-  
played on the screen.  
®
• In order to use Bluetooth Wireless  
Technology phone, you must first  
®
➂ Press the key again to con-  
nect a call to the selected number.  
pair and connect the Bluetooth  
Wireless Technology mobile phone.  
• If the mobile phone is not paired or  
connected, it is not possible to  
enter Phone mode. Once a phone  
is paired or connected, the guid-  
ance screen will be displayed.  
• Redialing the most recently called  
number  
4
➀ Press and hold (over 0.8 seconds)  
key on the steering  
the  
remote controller.  
• If Priority is set upon vehicle igni-  
®
1. VOLUME button : Raises or lowers  
speaker volume.  
tion (IGN/ACC ON), the Bluetooth  
Wireless Technology phone will be  
automatically connected. Even if  
➁ The most recently called number  
is redialed.  
2.MUTE button : Mute the micro-  
phone during a call.  
®
you are outside, the Bluetooth  
3.  
button : Places and transfers  
Wireless Technology phone will be  
automatically connected once you  
are in the vicinity of the vehicle. If you  
do not want automatic Bluetooth  
Wireless Technology phone connec-  
®
tion, set the Bluetooth Wireless  
calls.  
4.  
button : Ends calls or cancels  
functions.  
®
Technology power to OFF.  
4-47  
Multimedia System  
Phone Book  
Phone Setup  
Phone MENU (for RDS model)  
PHONE  
Press the  
Book] through the  
PHONE  
key Set [ Setup]  
PHONE  
key Set [ P. Press the  
TUNE knob or through the  
key.  
Press the  
key to display three  
3
TUNE knob or  
menus (Call History, Phone Book,  
Phone Setup).  
2
RDM  
key.  
The phone book is displayed and The Bluetooth® Wireless Technology  
can be used to select a number and mobile phone setup screen is dis-  
make a call.  
played. For more information, refer to  
“Phone Setup”.  
❈ If more than one number is saved  
to one contact, then a screen  
showing the mobile phone num-  
ber, Home and office number is  
displayed. Select the desired num-  
ber to make the call.  
Call history  
PHONE  
Press the  
History] through the  
key Set [  
TUNE knob  
❈ If phone book do not exist, a  
screen asking whether to down-  
load phone book is displayed.  
(The download feature may not be  
supported in some mobile  
phones)  
1
RPT  
or  
key.  
The call history is displayed and can  
be used to select a number and  
make a call.  
If call history does not exist, a screen  
asking whether to download call his-  
tory is displayed. (The download fea-  
ture may not be supported in some  
mobile phones)  
4-48  
Contacts  
Phone Setup  
Phone MENU  
PHONE  
Press the  
Contacts] through the  
PHONE  
PHONE  
key Set [  
Press the  
TUNE knob Setup] through the  
key Set [  
TUNE knob or  
Press the  
key to display three  
menus (Call History, Contacts,  
Phone Setup).  
2
RDM  
3
or  
key.  
key.  
The Contacts are displayed and can The Bluetooth® Wireless Technology  
be used to select a number and mobile phone setup screen is dis-  
make a call.  
played. For more information, refer to  
“Phone Setup”.  
❈ If more than one number is saved  
to one contact, then a screen  
showing the mobile phone num-  
ber, Home and office number is  
displayed. Select the desired num-  
ber to make the call.  
4
Call history  
PHONE  
Press the  
History] through the  
key Set [  
TUNE knob  
❈ If Contacts do not exist, a screen  
asking whether to download  
Contacts is displayed. (The down-  
load feature may not be supported  
in some mobile phones)  
1
RPT  
or  
key.  
The call history is displayed and can  
be used to select a number and  
make a call.  
If call history does not exist, a screen  
asking whether to download call his-  
tory is displayed. (The download fea-  
ture may not be supported in some  
mobile phones)  
4-49  
Multimedia System  
(Continued)  
(Continued)  
✽
NOTICE - USING THE  
Bluetooth Wireless Technology  
CELLULAR PHONE  
®
•
If the cellular phone signal is poor  
or the vehicles interior noise is too  
loud, it may be difficult to hear the  
other person’s voice during a call.  
Do not place the phone near or  
inside metallic objects, otherwise  
communications with Bluetooth®  
Wireless Technology system or cel-  
lular service stations can be dis-  
turbed.  
•
If Priority is set upon vehicle igni-  
tion(IGN/ACC  
ON),  
the  
Bluetooth® Wireless Technology  
phone will be automatically con-  
nected.  
•
•
•
Do not use a cellular phone or per-  
form  
Bluetooth®  
Wireless  
•
Technology settings (e.g. pairing a  
phone) while driving.  
Even  
if  
you  
are  
outside,  
the  
Bluetooth® Wireless Technology  
phone will be automatically con-  
nected once you are in the vicinity  
of the vehicle.  
Some  
Bluetooth®  
Wireless  
Technology -enabled phones may  
not be recognized by the system or  
fully compatible with the system.  
Before using Bluetooth® Wireless  
Technology related features of the  
audio system, refer your phone’s  
•
•
•
While  
a
phone  
is  
connected  
Wireless  
If you do not want automatic  
Bluetooth® Wireless Technology  
connection, turn the Bluetooth®  
Wireless Technology feature off.  
The hands-free call volume and  
quality may differ depending on  
the mobile phone type.  
through  
Bluetooth®  
Technology your phone may dis-  
charge quicker than usual for  
User’s  
Manual  
for  
phone-side  
additional  
Bluetooth®  
Wireless  
•
•
Bluetooth® Wireless Technology  
operations.  
Technology-related operations.  
Some cellular phones or other  
devices may cause interference  
noise or malfunction to audio sys-  
tem. In this case, store the device  
in a different location may resolve  
the condition.  
•
•
The phone must be paired to the  
audio system to use Bluetooth®  
Wireless Technology related fea-  
tures.  
Bluetooth® Wireless Technology  
features can be used only when the  
mobile phone has been paired and  
connected with the device. For  
more information on pairing and  
You will not be able to use the  
hands-free  
feature  
when  
your  
Phone contact names should be  
saved in English or they may not  
be displayed correctly.  
connecting  
Technology  
Bluetooth®  
Wireless  
mobile  
phone (in the car) is outside of the  
cellular service area (e.g. in a tun-  
nel, in a underground, in a moun-  
tainous area, etc.).  
enabled  
phones, refer to the “Phone Setup”  
(Continued)  
section.  
(Continued)  
(Continued)  
4-50  
(Continued)  
• When  
(Continued)  
a
Bluetooth®  
Wireless  
•
In some mobile phones, starting  
the ignition while talking through  
Bluetooth® Wireless Technology  
enabled handsfree call will result  
in the call becoming disconnected.  
(Switch the call back to your  
mobile phone when starting the  
ignition.)  
Technology mobile phone is con-  
nected, a ( ) icon will appear at  
the top of the screen. If a ( ) icon  
is not displayed, this indicates that  
a
Bluetooth® Wireless Technology  
enabled device has not been con-  
nected. You must connect the  
device before use. For more infor-  
mation on Bluetooth® Wireless  
Technology mobile phones, refer  
to the “Phone Setup” section.  
•
•
•
Some features may not be sup-  
ported  
in  
some  
Bluetooth®  
4
Wireless Technology mobile phone  
and devices.  
•
Pairing  
and  
connecting  
a
Bluetooth® Wireless Technology  
enabled operation may be unsta-  
ble depending on the communica-  
tion state.  
Bluetooth® Wireless Technology  
enabled mobile phone will work  
only when the Bluetooth® Wireless  
Technology option within your  
mobile phone has been turned on.  
Placing the audio system within an  
electromagnetic environment may  
result in noise interference.  
(Methods  
of  
turning  
on  
the  
Bluetooth® Wireless Technology  
enabled  
feature  
may  
differ  
depending on the mobile phone.)  
(Continued)  
4-51  
Multimedia System  
APPENDIX  
Name  
Description  
AST (A.store)  
SDVC  
Automatically selects and saves channels  
Speed Dependent Volume Control  
4-52  
HOW VEHICLE AUDIO WORKS (EXCEPT EUROPE)  
FM reception  
AM (MW, LW) reception  
FM radio station  
4
JBM001  
JBM002  
JBM003  
AM and FM radio signals are broadcast AM broadcasts can be received at FM broadcasts are transmitted at  
from transmitter towers located around  
your city. They are intercepted by the  
radio antenna on your vehicle.This sig-  
nal is then received by the radio and  
sent to your vehicle speakers.  
greater distances than FM broad- high frequencies and do not bend to  
casts. This is because AM radio follow the earth's surface. Because  
waves are transmitted at low fre- of this, FM broadcasts generally  
quencies. These long, low frequency begin to fade at short distances from  
radio waves can follow the curvature the station. Also, FM signals are eas-  
of the earth rather than travelling ily affected by buildings, mountains,  
When a strong radio signal has  
reached your vehicle, the precise engi- straight out into the atmosphere. In or other obstructions. These can  
neering of your audio system ensures  
the best possible quality reproduction.  
However, in some cases the signal  
coming to your vehicle may not be  
strong and clear.  
addition, they curve around obstruc- result in certain listening conditions  
tions so that they can provide better which might lead you to believe a  
signal coverage.  
problem exists with your radio. The  
following conditions are normal and  
do not indicate radio trouble:  
This can be due to factors, such as the  
distance from the radio station, close-  
ness of other strong radio stations or  
the presence of buildings, bridges or  
other large obstructions in the area.  
4-53  
Multimedia System  
Using a cellular phone or a  
two-way radio  
When a cellular phone is used inside  
the vehicle, noise may be produced  
from the audio system. This does not  
mean that something is wrong with the  
audio equipment. In such a case, use  
the cellular phone at a place as far as  
possible from the audio equipment.  
CAUTION  
JBM004  
JBM005  
• Fading - As your vehicle moves • Station Swapping - As a FM signal  
When using a communication  
system such as a cellular phone  
or a radio set inside the vehicle,  
a separate external antenna  
must be fitted. When a cellular  
phone or a radio set is used  
with an internal antenna alone,  
it may interfere with the vehi-  
cle's electrical system and  
adversely affect safe operation  
of the vehicle.  
away from the radio station, the  
signal will weaken and sound will  
begin to fade. When this occurs,  
we suggest that you select another  
stronger station.  
weakens, another more powerful  
signal near the same frequency  
may begin to play. This is because  
your radio is designed to lock onto  
the clearest signal. If this occurs,  
select another station with a  
stronger signal.  
• Flutter/Static - Weak FM signals or  
large obstructions between the  
transmitter and your radio can dis- • Multi-Path Cancellation - Radio  
turb the signal causing static or  
fluttering noises to occur. Reducing  
the treble level may lessen this  
effect until the disturbance clears.  
signals being received from sever-  
al directions can cause distortion  
or fluttering. This can be caused by  
a direct and reflected signal from  
the same station, or by signals  
from two stations with close fre-  
quencies. If this occurs, select  
another station until the condition  
has passed.  
WARNING  
Do not use a cellular phone  
while driving. Stop at a safe  
location to use a cellular phone.  
4-54  
CARING FOR DISC  
• If the temperature inside the car is • Depending on the type of CD-  
✽
NOTICE  
Order of playing files (folders) :  
too high, open the car windows to  
ventilate before using the system.  
R/CD-RW CDs, certain CDs may  
not operate normally according to  
manufacturing companies or mak-  
ing and recording methods. In such  
circumstances, continued use may  
cause malfunctions to your audio  
system.  
1. Song playing order  
sequentially.  
2. Folder playing order :  
:
to  
• It is illegal to copy and use  
MP3/WMA files without permis-  
sion. Use CDs that are created  
only by lawful means.  
❈
If no song file is contained in the  
folder, that folder is not displayed.  
• Do not apply volatile agents, such  
as benzene and thinner, normal  
cleaners and magnetic sprays  
made for analogue disc onto CDs.  
✽
NOTICE - Playing an  
Incompatible Copy  
Protected Audio CD  
4
• To prevent the disc surface from  
getting damaged, hold CDs by the  
edges or the center hole only.  
Some copy protected CDs, which do  
not comply with international audio  
CD standards (Red Book), may not  
play on your car audio. Please note  
• Clean the disc surface with a piece  
of soft cloth before playback (wipe  
it from the center to the outside  
edge).  
that inabilities to properly play  
a
copy protected CD may indicate  
that the CD is defective, not the CD  
player.  
• Do not damage the disc surface or  
attach pieces of sticky tape or  
paper.  
• Make certain only CDs are insert-  
ed into the CD player (Do not insert  
more than one CD at a time).  
• Keep CDs in their cases after use  
to protect them from scratches or  
dirt.  
4-55  
Multimedia System  
(Continued)  
(Continued)  
WARNING  
• Please refrain from use if the  
screen is blank or no sound  
can be heard as these signs  
may indicate product malfunc-  
tion. Continued use in such  
conditions could lead to acci-  
dents(fires, electric shock) or  
product malfunctions.  
• Driving while distracted can  
result in a loss of vehicle control  
that may lead to an accident,  
severe personal injury, and  
death. The driver’s primary  
responsibility is in the safe and  
legal operation of a vehicle, and  
use of any handheld devices,  
other equipment, or vehicle sys-  
tems which take the driver’s  
eyes, attention and focus away  
from the safe operation of a vehi-  
cle or which are not permissible  
by law should never be used  
during operation of the vehicle.  
• Do not stare at the screen  
while driving. Staring at the  
screen for prolonged periods  
of time could lead to traffic  
accidents.  
• Do not disassemble, assem-  
ble, or modify the audio sys-  
tem. Such acts could result in  
accidents, fire, or electric  
shock.  
• Do not touch the antenna dur-  
ing thunder or lightening as  
such acts may lead to light-  
ning induced electric shock.  
• Using the phone while driving  
may lead to a lack of attention  
of traffic conditions and  
increase the likelihood of  
accidents. Use the phone fea-  
ture after parking the vehicle.  
• Do not stop or park in park-  
ing-restricted areas to operate  
the product. Such acts could  
lead to traffic accidents.  
• Use the system with the vehi-  
cle ignition turned on.  
Prolonged use with the igni-  
tion turned off could result in  
battery discharge.  
• Heed caution not to spill water  
or introduce foreign objects  
into the device. Such acts  
could lead to smoke, fire, or  
product malfunction.  
(Continued)  
(Continued)  
4-56  
(Continued)  
(Continued)  
CAUTION  
• Turn on the car ignition before  
using this device. Do not oper-  
ate the audio system for long  
periods of time with the ignition  
turned off as such operations  
may lead to battery discharge.  
• Do not place beverages close  
to the audio system. Spilling  
beverages may lead to system  
malfunction.  
• Operating the device while  
driving could lead to acci-  
dents due to a lack of attention  
to external surroundings. First  
park the vehicle before operat-  
ing the device.  
• In case of product malfunc-  
tion, please contact your place  
of purchase or After Service  
center.  
• Do not subject the device to  
severe shock or impact. Direct  
pressure onto the front side of  
the monitor may cause damage  
to the LCD or touch screen.  
• Adjust the volume to levels  
that allow the driver to hear  
sounds from outside of the  
vehicle. Driving in a state  
where external sounds cannot  
be heard may lead to acci-  
dents.  
• Placing the audio system with-  
in an electromagnetic environ-  
ment may result in noise inter-  
ference.  
4
• When cleaning the device,  
make sure to turn off the  
device and use a dry and  
smooth cloth. Never use tough  
materials, chemical cloths, or  
solvents (alcohol, benzene,  
thinners, etc.) as such materi-  
als may damage the device  
panel or cause color/quality  
deterioration  
• Prevent caustic solutions such  
as perfume and cosmetic oil  
from contacting the dashboard  
because they may cause dam-  
age or discoloration.  
• Pay attention to the volume  
setting when turning the  
device on. A sudden output of  
extreme volume upon turning  
the device on could lead to  
hearing impairment. (Adjust  
the volume to a suitable levels  
before turning off the device.)  
(Continued)  
(Continued)  
4-57  
Multimedia System  
(Continued)  
(Continued)  
✽
NOTICE - USING THE USB  
DEVICE  
•
Depending on the condition of the  
external USB device, the connect-  
ed external USB device can be  
unrecognizable.  
•
If you disconnect the external USB  
device during playback in USB  
mode, the external USB device can  
be damaged or may malfunction.  
Therefore, disconnect the external  
USB device when the audio is  
turned off or in another mode.  
(e.g, Radio, CD)  
•
•
To use an external USB device,  
make sure the device is not con-  
nected when starting up the vehi-  
cle. Connect the device after start-  
ing up.  
If you start the engine when the  
USB device is connected, it may  
damage the USB device. (USB  
flashdrives are very sensitive to  
electric shock.)  
If the engine is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
The System may not play inau-  
thentic MP3 or WMA files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps ~ 320Kbps.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps ~ 320Kbps.  
Take precautions for static elec-  
tricity when connecting or discon-  
necting the external USB device.  
An encrypted MP3 PLAYER is  
not recognizable.  
•
When the formatted byte/sector  
setting of External USB device is  
not  
either  
512BYTE  
or  
2048BYTE, then the device will  
not be recognized.  
•
•
Depending on the type and capac-  
ity of the external USB device or  
the type of the files stored in the  
device, there is a difference in the  
time taken for recognition of the  
device.  
Do not use the USB device for pur-  
poses other than playing music  
files.  
•
•
Use only a USB device formatted  
to FAT 12/16/32.  
USB devices without USB I/F  
authentication may not be recog-  
nizable.  
•
•
•
•
•
Make sure the USB connection  
terminal does not come in contact  
with the human body or other  
objects.  
If you repeatedly connect or dis-  
connect the USB device in a short  
period of time, it may break the  
device.  
•
•
Playing videos through the USB is  
not supported.  
Use of USB accessories such as  
rechargers or heaters using USB  
I/F may lower performance or  
cause trouble.  
You may hear  
a
strange noise  
when connecting or disconnecting  
a USB device.  
(Continued)  
•
•
(Continued)  
(Continued)  
4-58  
(Continued)  
(Continued)  
•
If you use devices such as a USB  
hub purchased separately, the  
vehicle’s audio system may not  
recognize the USB device. In that  
•
Some USB flash memory readers  
(such as CF, SD, micro SD, etc.) or  
external-HDD type devices can be  
unrecognizable.  
case,  
connect  
the  
USB  
device  
•
•
Music files protected by DRM  
(DIGITAL RIGHTS MANAGE-  
MENT) are not recognizable.  
The data in the USB memory may  
be lost while using this audio.  
Always back up important data on  
a personal storage device.  
directly to the multimedia termi-  
nal of the vehicle.  
If the USB device is divided by log-  
ical drives, only the music files on  
the highest-priority drive are rec-  
ognized by car audio.  
•
•
4
Devices  
such  
as  
MP3  
Player/  
•
Please avoid using USB  
Cellular phone/Digital camera can  
be unrecognizable by standard  
USB I/F can be unrecognizable.  
Charging through the USB may  
not be supported in some mobile  
devices.  
USB HDD or USB types liable to  
connection failures due to vehicle  
vibrations are not supported. (i-  
stick type)  
memory  
which can be used as  
key chains or cellular  
phone accessories as  
they could cause damage to the  
USB jack. Please make certain  
only to use plug type connector  
products.  
products  
•
•
•
Some non-standard USB devices  
(METAL COVER TYPE USB)  
can be unrecognizable.  
(Continued)  
4-59  
Multimedia System  
®
(Continued)  
(Continued)  
✽
NOTICE - USING THE iPod  
DEVICE  
When connecting iPod® with the  
iPod® Power Cable, insert the con-  
nector to the multimedia socket  
completely. If not inserted com-  
pletely, communications between  
iPod® and audio may be interrupt-  
ed.  
•
Some iPod® devices, such as the  
iPhone®, can be connected through  
the Bluetooth® Wireless Technology  
interface. The device must have  
•
•
Some iPod® models may not sup-  
port communication protocol and  
files may not properly play.  
Supported iPod® models:  
- iPod® Mini  
audio  
Technology capability (such as for  
stereo headphone  
Bluetooth®  
Wireless Technology ). The device  
can play, but it will not be con-  
trolled by the audio system.  
Bluetooth®  
Wireless  
- iPod® 4th (Photo) ~ 6th (Classic)  
generation  
•
•
When adjusting the sound effects  
of the iPod® and the audio system,  
the sound effects of both devices  
will overlap and might reduce or  
distort the quality of the sound.  
Deactivate (turn off) the equalizer  
function of an iPod® when adjust-  
ing the audio system’s volume, and  
turn off the equalizer of the audio  
system when using the equalizer of  
- iPod® Nano 1st~4th generation  
- iPod® Touch 1st~2nd generation  
The order of search or playback of  
songs in the iPod® can be different  
from the order searched in the  
audio system.  
•
•
•
To use iPod® features within the  
audio, use the cable provided upon  
purchasing an iPod®d device.  
•
Skipping or improper operation may  
occur depending on the characteris-  
tics of your iPod®/iPhone® device.  
If your iPhone® is connected to both  
the Bluetooth® Wireless Technology  
and USB, the sound may not be prop-  
erly played. In your iPhone®, select  
the Dock connector or Bluetooth®  
Wireless Technology to change the  
sound output (source).  
•
•
If the iPod® disabled due to its  
own malfunction, reset the iPod®  
(Reset: Refer to iPod® manual)  
.
an iPod®  
.
An iPod® may not operate nor-  
mally on low battery.  
(Continued)  
•
When not using iPod® with car  
audio, detach the iPod® cable from  
iPod®  
.
Otherwise,  
iPod®  
may  
remain in accessory mode, and  
may not work properly.  
(Continued)  
4-60  
■ CD Player : AC100TMGG, AC110TMGG, AC100TMGE, AC110TMGE, AC100TMGN, AC110TMGN,  
AC100TMGL*, AC110TMGL*  
4
* : for columbia  
❈ No  
logo will be shown if the Bluetooth® Wireless Technology feature is not supported.  
4-61  
Multimedia System  
SYSTEM CONTROLLERS AND FUNCTIONS  
SEEK  
TRACK  
❈ Display and settings may differ  
depending on the selected audio.  
RADIO  
2.  
5.  
• Changes to FM/AM mode.  
• Each time the key is pressed,the  
mode is changed in order of FM1 ➟  
FM2 ➟ AM.  
• Radio Mode : Automatically search-  
es for broadcast frequencies.  
• CD, USB, iPod®, My Music modes  
- Shortly press the key (under 0.8  
seconds): Moves to next or previ-  
ous song (file)  
Audio Head Unit  
MEDIA  
3.  
• Changes to CD, USB(iPod®), AUX,  
My Music, BT Audio mode.  
- Press and hold the key (over 0.8  
seconds): Rewinds or fast-for-  
wards the current song.  
• Each time the key is pressed, the  
mode is changed in order of CD,  
USB(iPod®), AUX, My Music, BT  
Audio mode.  
6. PWR/VOL knob  
•
Power Knob:Turns power On/Off  
by pressing the knob  
PHONE  
4.  
(if equipped)  
•
Volume Knob: Sets volume by  
turning the knob left/right  
• Operates Phone Screen  
❈ When a phone is not connected,  
the connection screen is displayed.  
1.  
(EJECT)  
• Ejects the disc.  
4-62  
• CD, USB, My Music mode  
- Shortly press the key (under 0.8  
seconds): Previews each song  
(file) for 10 seconds each.  
SCAN  
DISP  
8.  
• Each time the button is shortly  
pressed (under 0.8 seconds), sets  
screen Off ➟ Screen On ➟ Screen  
Off  
❈ Press the  
key again to  
continue listening to the current  
song (file).  
❈ Audio operation is maintained and  
only the screen will be turned Off.  
In the screen Off state, press any  
key to turn the screen On again.  
SETUP  
CLOCK  
10.  
• Shortly press the key (under 0.8  
seconds) : Moves to the Display,  
Sound, Clock, Phone, System set-  
ting modes  
4
SCAN  
9.  
• Radio Mode  
- Shortly press the key : Previews  
each broadcast for 5 seconds  
each.  
1
6
7.  
(Preset)  
~
• Press and hold the key (over 0.8  
seconds) : Move to the Time setting  
screen  
• Radio Mode: Saves frequencies  
(channels) or receives saved fre-  
quencies (channels)  
- Press and hold the key (over 0.8  
seconds): Previews the broad-  
• CD, USB, iPod®, My Music mode  
MENU  
11.  
Displays menus for the current  
1
casts saved in Preset  
6
~
1
RPT  
2
-
-
: Repeat  
: Random  
for 5 seconds each.  
SCAN  
RDM  
❈ Press the  
key again to mode.  
• In the Radio, Media, Setup, and  
Menu pop up screen, the number  
menu is selected.  
❈ iPod® List : Move to parent category  
continue listening to the current  
frequency.  
FOLDER  
12.  
• CD MP3, USB mode : Folder  
Search  
4-63  
Multimedia System  
13.  
TUNE knob  
• Radio mode : Changes frequency  
by turning the knob left/right  
• CD, USB, iPod®, My Music mode:  
Searches songs (files) by turning  
the knob left/right  
❈ When the desired song is dis-  
played, press the knob to play the  
song.  
• Moves focus in all selection menus  
and selects menus  
FM  
14.  
• Changes to FM mode.  
• Each time the key is pressed, the  
mode changed in order of FM1 ➟  
FM2.  
AM  
15.  
• Changes to AM mode.  
4-64  
SETUP - AC100TMGG, AC110TMGG, AC100TMGE, AC110TMGE, AC100TMGN, AC110TMGN,  
AC100TMGL*, AC110TMGL*  
* : FOR COLUMBIA  
Mode Pop up  
Media Display  
Display Settings  
On  
[Mode Pop up] Changes  
selection mode  
.
When playing an MP3 file, select the  
desired display info from ‘Folder/File’  
or ‘Album/Artist/Song’.  
SETUP  
CLOCK  
Press the  
[Display] through  
key Select  
TUNE knob or  
RADIO  
• During On state, press the  
MEDIA  
or  
change pop up screen.  
key to display the mode  
1
key Select menu through  
TUNE knob  
RPT  
• When the pop up screen is dis-  
played, use the  
4
TUNE knob or  
to select the  
1
6
keys ~  
desired mode.  
Text Scroll  
[Text Scroll ] Set  
On  
On  
Off  
/
•
•
: Maintains scroll  
Off  
: Scrolls only one (1) time.  
4-65  
Multimedia System  
Audio Settings  
Speed Dependent Volume  
Control  
Sound Settings  
This menu allows you to set the  
‘Bass, Middle, Treble’ and the Sound This feature is used to automatically  
Fader and Balance.  
Select [Sound Settings] Select  
menu through  
TUNE knob left/right to set  
SETUP  
CLOCK  
Press the  
[Sound] through  
key Select  
TUNE knob or  
key Select menu through  
control the volume level according to  
the speed of the vehicle.  
2
RDM  
TUNE knob Turn  
Select [Speed Dependent Vol.] Set  
in 4 levels [Off/Low/Mid/High] of  
TUNE knob  
TUNE knob  
• Bass, Middle, Treble : Selects the  
sound tone.  
• Fader, Balance : Moves the sound  
fader and balance.  
• Default : Restores default settings.  
❈ Return : While adjusting values,  
re-pressing the TUNE knob will  
restore the parent menu.  
4-66  
Clock Settings  
Calendar Settings  
Clock Settings  
This menu is used to set the time.  
This menu is used to set the date.  
SETUP  
CLOCK  
Select [Clock Settings] Set through Select [Calendar Settings] Set  
TUNE knob Press TUNE knob through TUNE knob Press  
TUNE knob  
Press the  
[Clock] through  
key Select  
TUNE knob or  
key Select menu through  
3
TUNE knob  
4
❈ Adjust the number currently in  
focus to set the [hour] and press ❈ Adjust the number currently in  
the tune knob to set the [minute].  
focus to make the settings and  
press the tune knob to move to the  
next setting. (Set in order of  
Year/Month/Day)  
Clock Display when Power is  
OFF  
Select [Clock Disp.(Pwr Off) Set  
On  
Off  
/
through  
TUNE knob  
On  
Off  
•
•
: Displays time/date on screen  
: Turn off.  
4-67  
Multimedia System  
➂ Pairing completion is displayed.  
Pair Phone  
Phone Setup (if eqipped)  
❈ In some mobile phones, pairing  
will automatically be followed by  
connection.  
SETUP  
CLOCK  
CAUTION  
Press the  
key Select [Phone]  
To pair a Bluetooth® Wireless  
Technology enabled mobile  
phone, authentication and con-  
nection processes are first  
required. As a result, you can-  
not pair your mobile phone  
while driving the vehicle. First  
park your vehicle before use.  
❈ It is possible to pair up to five  
®
Bluetooth Wireless Technology  
enabled mobile phones.  
Select [Pair Phone] Set through  
TUNE knob  
➀ Search for device names as dis-  
played on your mobile phone and  
connect.  
➁ Input the passkey displayed on the  
screen. (Passkey : 0000)  
❈ The device name and passkey will  
be displayed on the screen for up  
to 3 minutes. If pairing is not com-  
pleted within the 3 minutes, the  
mobile phone pairing process will  
automatically be canceled.  
4-68  
• Connecting a phone  
• Disconnecting a connected phone  
Select [Phone List] Select mobile  
phone through TUNE knob  
Select [Disconnect Phone]  
Phone List  
Select [Phone List] Select mobile  
phone through  
Select [Connect Phone]  
The names of up to 5 paired phones  
will be displayed.  
TUNE knob  
4
A [ ] is displayed in front of the cur-  
rently connected phone.  
➀ Select the currently connected  
mobile phone.  
➀ Select a mobile phone that is not  
currently connected.  
Select the desired name to setup the  
selected phone.  
➁ Disconnect the selected mobile  
phone.  
➁ Connect the selected mobile  
phone.  
➂ Disconnection completion is dis-  
played.  
➂ Connection completion is dis-  
played.  
❈ If a phone is already connected,  
disconnect the currently connect-  
ed phone and select a new phone  
to connect.  
4-69  
Multimedia System  
• Changing connection sequence  
(Priority)  
- The connected phone will auto-  
matically be changed to No. 1 pri-  
ority.  
Contacts Download  
This feature is used to download  
contacts and call histories into the  
audio system.  
This is used to change the order (pri-  
ority) of automatic connection for the  
paired mobile phones.  
• Delete  
Select [Phone List] Select mobile  
Select [Contacts Download] Select  
through  
Select [Phone List] Select [Priority]  
through TUNE knob Select No. 1  
Priority mobile phone  
TUNE knob  
phone through  
Select [Delete]  
TUNE knob  
CAUTION  
➀ Select the desired mobile phone.  
➁ Delete the selected mobile phone.  
➂ Deletion completion is displayed.  
• The download feature may not  
be supported in some mobile  
phones.  
➀ Select [Priority].  
➁ From the paired phones, select  
the phone desired for No.1 priority.  
❈ When attempting to delete a cur-  
rently connected phone, the  
phone is first disconnected.  
• If a different operation is per-  
formed while Contacts are  
being downloaded, download-  
ing will be discontinued.  
Contacts already downloaded  
will be saved.  
➂ The changed priority sequence is  
displayed.  
❈ Once the connection sequence  
(priority) is changed, the new no. 1  
priority mobile phone will be con-  
nected.  
CAUTION  
• When you delete a mobile  
phone, the mobile phone con-  
tacts will also be erased.  
• For stable Bluetooth® Wireless  
Technology communication,  
delete the mobile phone from  
the audio and also delete the  
audio from your mobile phone.  
• When  
downloading  
new  
- when the no. 1 priority cannot be  
connected: Automatically attempts  
to connect the most recently con-  
nected phone.  
Contacts, delete all previously  
saved Contacts before start-  
ing download.  
- Cases when the most recently  
connected phone cannot be con-  
nected: Attempts to connect in the  
order in which paired phones are  
listed.  
4-70  
Auto Download  
Audio Streaming  
Outgoing Volume  
When connecting a mobile phone, it Songs (files) saved in your This is used to set the volume of your  
®
is possible to automatically download Bluetooth  
new Contacts and Call Histories. enabled mobile phone can be played while on a Bluetooth Wireless  
Wireless Technology voice as heard by the other party  
®
through the audio system.  
Technology enabled handsfree call.  
Select [Outgoing Volume] Set vol-  
On  
Select [Auto Download] Set  
Off  
/
On  
through  
TUNE knob  
Select [Audio Streaming] Set  
Off  
/
through  
TUNE knob  
ume through  
TUNE knob  
❈ While on a call, the volume can be  
SEEK  
changed by using the  
TRACK  
key.  
CAUTION  
4
The  
Bluetooth®  
Wireless  
Technology audio streaming  
feature may not be supported in  
some mobile phones.  
4-71  
Multimedia System  
®
Bluetooth® Wireless Technology  
System Off  
• Turning On Bluetooth Wireless  
CAUTION  
SETUP  
Technology through the  
CLOCK  
Key  
Press the  
Bluetooth® Wireless Technology  
connection may become inter-  
mittently disconnected in some  
mobile phones. Follow these  
next steps to try again.  
This feature is used when you do not  
SETUP  
®
wish to use the Bluetooth Wireless  
Technology system.  
key Select [Phone]  
CLOCK  
➀ A screen asking whether to turn on  
®
Bluetooth Wireless Technology will  
be displayed.  
Select [Bluetooth System Off] Set  
through  
TUNE knob  
➁ On the screen, select  
®
to turn  
on Bluetooth Wireless Technology  
1)Turn the Bluetooth® Wireless  
Technology function within the  
mobile phone ON/OFF and try  
to connect again.  
YES  
❈ If a phone is already connected,  
disconnect the currently connect-  
®
and display guidance.  
ed phone and turn the Bluetooth  
Wireless Technology system off.  
®
❈ If  
the  
Bluetooth  
Wireless  
Technology system is turned on, the  
system will automatically try to con-  
nect the most recently connected  
Bluetooth Wireless Technology  
mobile phone.  
2)Turn the mobile phone power  
ON/OFF and try to connect  
again.  
Using the Bluetooth® Wireless  
Technology System  
®
®
3) Completely remove the mobile  
phone battery,reboot,and then  
try to connect again.  
To  
use  
Bluetooth  
Wireless  
Technology when the system is cur-  
rently off, follow these next steps.  
4) Reboot the audio system and  
try to connect again  
®
• Turning On Bluetooth Wireless  
5) Delete all paired devices in  
your mobile phone and the  
audio system and pair again  
for use.  
PHONE  
Technology through the  
PHONE  
Key  
Press the  
Guidance  
key Screen  
❈ Moves to the screen where  
®
Bluetooth Wireless Technology  
functions can be used and dis-  
plays guidance.  
4-72  
Memory Information  
(if equipped)  
Language  
System Settings  
SETUP  
This menu is used to set the display  
Displays currently used memory and and voice recognition language.  
total system memory.  
Press the  
key Select [System]  
CLOCK  
Select [Language] Set through  
TUNE knob  
Select [Memory Information] OK  
The currently used memory is dis-  
played on the left side while the total  
system memory is displayed on the  
right side.  
4
❈ The system will reboot after the  
language is changed.  
❈ Language support by region  
- English,  
4-73  
Multimedia System  
RADIO  
Changing RADIO mode  
Preset SEEK  
SCAN  
1
6
SCAN  
Press the key  
Press the  
~
key  
• Shortly pressing the key (under 0.8 • Shortly pressing the key (under 0.8  
seconds): Plays the frequency  
saved in the corresponding key.  
seconds): The broadcast frequen-  
cy increases and previews each  
broadcast for 5 seconds each.  
After scanning all frequencies,  
returns and plays the current  
broadcast frequency.  
• Pressing and holding the key (over  
0.8 seconds): Pressing and holding  
1
6
the desired key from  
will save the currently playing  
~
broadcast to the selected key and • Pressing and holding the key (over  
sound a BEEP. 0.8 seconds): Previews the broad-  
SEEK  
SEEK  
TRACK  
Press the  
key  
1
6
casts saved in Preset  
for 5 seconds each.  
~
• Shortly pressing the key (under 0.8  
seconds): Changes the frequency.  
• Pressing and holding the key (over  
0.8 seconds): Automatically search-  
es for the next frequency.  
4-74  
Selecting through manual  
search  
MENU  
MENU  
Within  
TUNE knob left/right to (Auto Store) and Info functions.  
key are the A.Store  
Turn the  
adjust the frequency.  
• AC100TMGE, AC110TMGE  
- FM : Changes by 50KHz  
- AM : Changes by 9khz  
• AC100TMGG, AC110TMGG  
- FM : Changes by 100KHz  
- AM : Changes by 9khz  
4
• AC100TMGL, AC110TMGL  
- FM : Changes by 100KHz  
- AM : Changes by 10khz  
• AC100TMGN, AC110TMGN  
- FM : Changes by 200KHz  
- AM : Changes by 10khz  
A.Store (Auto Store)  
MENU  
Press the  
A.Store] through  
key Set [  
TUNE knob or  
1
RPT  
key.  
Select A.Store(Auto Store) to save  
frequencies with superior reception  
1
6
to presets  
~
. If no fre-  
quencies are received, then the most  
recently received frequency will be  
broadcast.  
4-75  
Multimedia System  
BASIC METHOD OF USE : Audio CD / MP3 CD / USB / iPod® / My Music  
MEDIA  
Press the  
key to change the  
Repeat  
modmodeinorderofCD➟USB(iPod®)  
➟ AUX ➟ My Music ➟ BT Audio.  
1
RPT  
While song (file) is playing  
(RPT) key  
The folder/file name is displayed on  
the screen.  
Audio CD, MP3 CD, USB, iPod®, My  
Music mode: RPT on screen  
• To repeat one song (Shortly press-  
ing the key (under 0.8 seconds)):  
Repeats the current song.  
MP3 CD, USB mode: FLD.RPT on  
screen  
<USB>  
• To repeat folder (pressing twice):  
repeats all files within the current  
folder.  
<Audio CD>  
<My Music>  
1
❈ Press the  
off repeat.  
key again to turn  
RPT  
❈ The CD is automatically played  
when a CD is inserted.  
❈ The USB music is automatically  
played when a USB is connected.  
<CD MP3>  
4-76  
Random  
Changing Song/File  
Scan  
2
RDM  
SEEK  
TRACK  
SCAN  
While song (file) is playing  
(RDM) key  
While song (file) is playing  
key  
While song (file) is playing  
key  
• Shortly pressing the key: Plays the • Shortly pressing the key (under 0.8  
current song from the beginning.  
Audio CD, My Music mode: RDM on  
screen  
seconds) : Scans all songs from  
the next song for 10 seconds each.  
SEEK  
❈ If the  
TRACK key is pressed  
• Random (Shortly pressing the key ):  
Plays all songs in random order.  
SCAN  
❈ Press the  
off.  
key again to turn  
again within 1 second, the previ-  
ous song is played.  
• Pressing and holding the key (over ❈ The SCAN function is not support-  
MP3 CD, USB mode: FLD.RDM on  
screen  
ed in iPod® mode.  
0.8 seconds): Rewinds the song.  
SEEK  
4
• Folder Random (Shortly pressing  
the key): Plays all files within the  
current folder in random order.  
While song (file) is playing  
key  
TRACK  
• Shortly pressing the key: Plays the  
next song.  
MP3 CD, USB mode: RDM on  
screen  
• Pressing and holding the key (over  
0.8 seconds): Fast forwards the  
song.  
• Random (pressing twice): Plays all  
files in random order.  
iPod® mode: RDM on screen  
• Random (press the key) : Plays all  
files in random order.  
2
RDM  
❈ Press the  
off random.  
key again to turn  
4-77  
Multimedia System  
Information  
Folder Search : MP3 CD, USB  
Mode  
MENU : Audio CD  
MENU  
Press the  
through the  
key Set [ Info]  
3
MENU  
Press the CD MP3 mode  
to set the Repeat, Random,  
Information features.  
key  
TUNE knob or  
FOLDER  
While file is playing  
(Folder Up) key  
key to display information of the cur-  
rent song.  
MENU  
❈ Press the  
info display.  
key to turn off  
• Searches the next folder.  
I
FOLDER  
While file is playing  
(Folder Down) key  
• Searches the parent folder.  
Repeat  
❈ If a folder is selected by pressing  
the  
MENU  
Press the  
through the  
key to repeat the current song.  
key Set [ RPT]  
TUNE knob or  
TUNE knob, the first file  
within the selected folder will be  
played.  
1
RPT  
❈ Press RPT again to turn off.  
Searching Songs (File)  
Random  
• Turning TUNE knob : Searches  
for songs (files)  
MENU  
Press the  
through the  
key to randomly play songs within  
the current folder.  
key Set [ RDM]  
TUNE knob or  
2
RDM  
• Pressing TUNE knob : Plays  
selected song (file).  
❈ Press RDM again to turn off.  
4-78  
Folder Repeat  
Copy  
MENU : MP3 CD / USB  
MENU  
MENU  
Press the  
through the  
key Set [ F.RPT]  
3
Press the  
through the  
key.  
key Set [ Copy]  
6
MENU  
Press the CD MP3 mode  
key  
TUNE knob or  
key to repeat songs within the cur-  
rent folder.  
TUNE knob or  
to set the Repeat, Folder Random,  
Folder Repeat, All Random,  
Information, and Copy features.  
This is used to copy the current  
song into My Music. You can play  
the copied Music in My Music  
mode.  
❈ Press F.RPT again to turn off.  
All Random  
I
❈ If another key is pressed while  
copying is in progress, a pop up  
asking you whether to cancel  
copying is displayed.  
MENU  
Press the  
key Set [  
TUNE knob  
key to randomly play all  
A.RDM] through the  
4
4
or  
songs within the CD.  
❈ If another media is connected or  
inserted (USB, CD, iPod®, AUX)  
while copying is in progress, copy-  
ing is canceled.  
❈ Press A.RDM again to turn off.  
Repeat  
MENU  
Press the  
through the  
key to repeat the current song.  
key Set [ RPT]  
TUNE knob or  
1
RPT  
Information  
MENU  
Press the  
through the  
key Set [ Info]  
5
❈ Music will not be played while  
copying is in progress.  
❈ Press RPT again to turn off.  
TUNE knob or  
key to display information of the cur-  
rent song.  
Folder Random  
MENU  
MENU  
key to turn off  
Press the  
F.RDM] through the TUNE knob or  
key Set [  
❈ Press the  
info display.  
2
RDM  
key to randomly play songs  
within the current folder.  
❈ Press F.RDM again to turn off.  
4-79  
Multimedia System  
MENU : iPod®  
Random  
Search  
In iPod® mode, press the  
key to  
MENU  
MENU  
Press the  
through the  
key.  
key Set [ RDM] Press the  
TUNE knob or  
key Set [  
TUNE knob  
MENU  
2
RDM  
Search] through the  
4
set the Repeat, Random, Information  
and Search features.  
or  
key.  
Plays all songs within the currently Displays iPod® category list.  
❈ Searching iPod® category is  
playing category in random order.  
MENU  
❈ Press RDM again to turn off.  
key pressed, move to parent cate-  
gory.  
Information  
MENU  
Press the  
through the  
key.  
key Set [ Info]  
3
TUNE knob or  
Repeat  
MENU  
Press the  
through the  
key to repeat the current song.  
key Set [ RPT]  
TUNE knob or  
1
RPT  
Displays information of the current  
song.  
MENU  
❈ Press the  
info display.  
key to turn off  
❈ Press RPT again to turn repeat  
off.  
4-80  
Random  
Delete  
MENU : My Music Mode  
(if equipped)  
MENU  
MENU  
key Set [ Delete]  
Press the  
through the  
key.  
key Set [ RDM] Press the  
TUNE knob or  
2
RDM  
4
through the  
key.  
TUNE knob or  
MENU  
In My Music mode, press the  
Plays all songs in random order.  
Deletes currently playing file  
key to set the Repeat, Random,  
Information, Delete, Delete All, and  
Delete Selection features.  
❈ Press RDM again to turn random  
off.  
In the play screen, pressing delete  
will delete the currently playing  
song.  
Deletes file from list  
Information  
4
MENU  
Press the  
through the  
key.  
key Set [ Info]  
3
TUNE knob or  
Displays information of the current  
song.  
Repeat  
MENU  
key to turn off  
MENU  
❈ Press the  
info display.  
Press the  
through the  
key.  
key Set [ RPT]  
TUNE knob or  
1
RPT  
➀ Select the file you wish to delete  
by using the  
TUNE knob.  
MENU  
Repeats the currently playing song.  
➁ Press the  
key and select  
the delete menu to delete the  
selected file.  
❈ Press RPT again to turn repeat off.  
4-81  
Multimedia System  
Delete All  
Delete Selection  
✽
NOTICE - Using the My  
Music  
MENU  
Press the  
Del.Sel] through the  
MENU  
key Set [  
TUNE knob  
Press the  
through the  
key.  
key Set [ Del.All]  
5
•
Even if memory is available,  
maximum of 6,000 songs can be  
stored.  
The same song can be copied up to  
1,000 times.  
Memory info can be checked in  
the System menu of Setup.  
a
TUNE knob or  
6
or  
key.  
Songs within My Music are selected  
and deleted.  
Deletes all songs of My Music.  
•
•
➀ Select the songs you wish to  
delete from the list.  
MENU  
➁ After selecting, press the  
key and select the delete menu.  
4-82  
AUX  
AUX is used to play external MEDIA  
currently connected with the AUX  
terminal.  
AUX mode will automatically start  
when an external device is connect-  
ed with the AUX terminal.  
If an external device is connected,  
MEDIA  
you can also press the  
change to AUX mode.  
key to  
4
❈ AUX mode cannot be started  
unless there is an external device  
connected to the AUX terminal.  
✽
NOTICE - USING THE AUX  
Fully insert the AUX cable into the  
AUX terminal for use.  
4-83  
Multimedia System  
BLUETOOTH® WIRELESS TECHNOLOGY AUDIO (IF EQUIPPED)  
Starting Bluetooth® Wireless  
Technology Audio  
®
What is Bluetooth® Wireless  
Technology?  
• The Bluetooth word mark and  
logos are registered trademarks  
®
owned by Bluetooth SIG, Inc. and  
®
MEDIA  
• Press the  
key to change the  
Bluetooth  
Wireless Technology  
any use of such marks is under  
license. Other trademarks and trade  
names are those of their respective  
mode in order of CD ➟ USB ➟ AUX  
➟ My Music ➟ BT Audio.  
allows devices to be connected in a  
short distance, including hands-free  
devices, stereo headsets, wireless  
remote controllers, etc. For more  
information, visit the Bluetooth  
Wireless Technology website at  
www.Bluetooth.com  
®
• If BT Audio is selected, Bluetooth  
Wireless Technology audio will start  
playing.  
®
owners. A Bluetooth enabled cell  
®
phone is required to use Bluetooth  
Wireless Technology  
®
❈ Audio may not automatically start  
playing in some mobile phones.  
®
• Bluetooth Wireless Technology  
audio can be used only when the  
[Audio Streaming] of Phone is  
turned On.  
®
Before using Bluetooth Wireless  
Technology audio features  
®
• Bluetooth Wireless Technology  
audio may not be supported  
depending on the compatibility of  
®
your Bluetooth WirelessTechnology  
®
Using the Bluetooth Wireless  
Technology audio features  
®
❈ Setting Bluetooth  
Technology Audio Streaming :  
Wireless  
• Play / Pause  
SETUP  
CLOCK  
Press the  
key Select  
Press the TUNE knob to play and  
pause the current song.  
[Phone] through the tune knob  
Select [Audio Streaming] through  
mobile phone.  
• In order to use Bluetooth Wireless  
On  
Off  
the TUNE knob Set  
/
®
Technology audio, you must first  
®
pair and connect the Bluetooth  
Wireless Technology mobile phone.  
❈ The previous song / next song /  
play / pause functions may not be  
supported in some mobile phones.  
4-84  
• Check call history and making call  
Making a call using the Steering  
wheel remote controller  
Phone (if equipped)  
➀ Shortly press (under 0.8 seconds)  
the key on the steering  
remote controller.  
Before using the Bluetooth® Wireless  
Technology phone features  
➁ The call history list will be dis-  
played on the screen.  
®
• In order to use Bluetooth Wireless  
➂ Press the key again to con-  
nect a call to the selected number.  
Technology phone, you must first  
®
pair and connect the Bluetooth  
Wireless Technology mobile phone.  
• If the mobile phone is not paired or  
connected, it is not possible to  
enter Phone mode. Once a phone  
is paired or connected, the guid-  
ance screen will be displayed.  
• Redialing the most recently called  
number  
4
➀ Press and hold (over 0.8 seconds)  
the key on the steering  
remote controller.  
1. VOLUME button : Raises or lowers  
speaker volume.  
• If Priority is set upon vehicle igni-  
®
➁ The most recently called number  
is redialed.  
tion (IGN/ACC ON), the Bluetooth  
Wireless Technology phone will be  
automatically connected. Even if  
2.MUTE button : Mute the micro-  
phone during a call.  
®
you are outside, the Bluetooth  
3.  
button : Places and transfers  
Wireless Technology phone will be  
automatically connected once you  
are in the vicinity of the vehicle. If you  
do not want automatic Bluetooth  
Wireless Technology phone connec-  
®
tion, set the Bluetooth Wireless  
calls.  
4.  
button : Ends calls or cancels  
functions.  
®
Technology power to OFF.  
4-85  
Multimedia System  
Contacts  
Phone Setup  
Phone MENU  
PHONE  
Press the  
Contacts] through the  
PHONE  
PHONE  
key Set [  
Press the  
TUNE knob Setup] through the  
key Set [  
TUNE knob or  
Press the  
key to display three  
menus (Call History, Contacts,  
Phone Setup).  
2
RDM  
3
or  
key.  
key.  
The Contacts are displayed and can The Bluetooth® Wireless Technology  
be used to select a number and mobile phone setup screen is dis-  
make a call.  
played. For more information, refer to  
“Phone Setup”.  
❈ If more than one number is saved  
to one contact, then a screen  
showing the mobile phone num-  
ber, Home and office number is  
displayed. Select the desired num-  
ber to make the call.  
Call history  
PHONE  
Press the  
History] through the  
key Set [  
TUNE knob  
❈ If Contacts do not exist, a screen  
asking whether to download  
Contacts is displayed. (The down-  
load feature may not be supported  
in some mobile phones)  
1
RPT  
or  
key.  
The call history is displayed and can  
be used to select a number and  
make a call.  
If call history does not exist, a screen  
asking whether to download call his-  
tory is displayed. (The download fea-  
ture may not be supported in some  
mobile phones)  
4-86  
(Continued)  
(Continued)  
✽
NOTICE - USING THE  
Bluetooth Wireless Technology  
CELLULAR PHONE  
®
•
If the cellular phone signal is poor  
or the vehicles interior noise is too  
loud, it may be difficult to hear the  
other person’s voice during a call.  
Do not place the phone near or  
inside metallic objects, otherwise  
communications with Bluetooth®  
Wireless Technology system or cel-  
lular service stations can be dis-  
turbed.  
•
If Priority is set upon vehicle igni-  
tion(IGN/ACC  
ON),  
the  
Bluetooth® Wireless Technology  
phone will be automatically con-  
nected.  
•
Do not use a cellular phone or per-  
form  
Bluetooth®  
Wireless  
•
Technology settings (e.g. pairing a  
phone) while driving.  
Even  
if  
you  
are  
outside,  
the  
Bluetooth® Wireless Technology  
phone will be automatically con-  
nected once you are in the vicinity  
of the vehicle.  
•
•
Some  
Bluetooth®  
Wireless  
Technology -enabled phones may  
not be recognized by the system or  
fully compatible with the system.  
Before using Bluetooth® Wireless  
Technology related features of the  
audio system, refer your phone’s  
4
•
•
•
While  
a
phone  
is  
connected  
Wireless  
If you do not want automatic  
Bluetooth® Wireless Technology  
connection, turn the Bluetooth®  
Wireless Technology feature off.  
The hands-free call volume and  
quality may differ depending on  
the mobile phone type.  
through  
Bluetooth®  
Technology your phone may dis-  
charge quicker than usual for  
User’s  
Manual  
for  
phone-side  
additional  
Bluetooth®  
Wireless  
•
•
Bluetooth® Wireless Technology  
operations.  
Technology-related operations.  
Some cellular phones or other  
devices may cause interference  
noise or malfunction to audio sys-  
tem. In this case, store the device  
in a different location may resolve  
the condition.  
•
•
The phone must be paired to the  
audio system to use Bluetooth®  
Wireless Technology related fea-  
tures.  
Bluetooth® Wireless Technology  
features can be used only when the  
mobile phone has been paired and  
connected with the device. For  
more information on pairing and  
You will not be able to use the  
hands-free  
feature  
when  
your  
Phone contact names should be  
saved in English or they may not  
be displayed correctly.  
connecting  
Technology  
Bluetooth®  
Wireless  
mobile  
phone (in the car) is outside of the  
cellular service area (e.g. in a tun-  
nel, in a underground, in a moun-  
tainous area, etc.).  
enabled  
phones, refer to the “Phone Setup”  
(Continued)  
section.  
(Continued)  
(Continued)  
4-87  
Multimedia System  
(Continued)  
(Continued)  
•
When  
a
Bluetooth®  
Wireless  
•
In some mobile phones, starting  
the ignition while talking through  
Bluetooth® Wireless Technology  
enabled handsfree call will result  
in the call becoming disconnected.  
(Switch the call back to your  
mobile phone when starting the  
ignition.)  
Technology mobile phone is con-  
nected, a ( ) icon will appear at  
the top of the screen. If a ( ) icon  
is not displayed, this indicates that  
a
Bluetooth® Wireless Technology  
enabled device has not been con-  
nected. You must connect the  
device before use. For more infor-  
mation on Bluetooth® Wireless  
Technology mobile phones, refer  
to the “Phone Setup” section.  
•
•
•
Some features may not be sup-  
ported  
in  
some  
Bluetooth®  
Wireless Technology mobile phone  
and devices.  
•
Pairing  
and  
connecting  
a
Bluetooth® Wireless Technology  
enabled operation may be unsta-  
ble depending on the communica-  
tion state.  
Bluetooth® Wireless Technology  
enabled mobile phone will work  
only when the Bluetooth® Wireless  
Technology option within your  
mobile phone has been turned on.  
Placing the audio system within an  
electromagnetic environment may  
result in noise interference.  
(Methods  
of  
turning  
on  
the  
Bluetooth® Wireless Technology  
enabled  
feature  
may  
differ  
depending on the mobile phone.)  
(Continued)  
4-88  
APPENDIX  
Name  
Description  
AST (A.store)  
SDVC  
Automatically selects and saves channels  
Speed Dependent Volume Control  
4
4-89  

Related Topics

Audio System (Antenna / Remote Control) How Vehicle Audio Works Caring For Disc Audio Warning and Cautions Using the USB Device Using the iPod Device CD Player RDS Model (System Controllers) CD Player General (System Controllers) Setup RDS Model Setup General Radio RDS Model Radio General Basic Method of Use Bluetooth Wireless Technology Audio Phone / Handsfree

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot