Get What to do in an emergency -> If You Have a Flat Tire Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

What to do in an emergency

IF YOU HAVE A FLAT TIRE

Jack and tools

WARNING

Changing a tire can be danger-

ous. Follow the instructions in

this section when changing a

tire to reduce the risk of serious

injury or death.

OLMB063004

Remove the lock (1, if equipped) by

pulling it out. Turn the winged hold

down bolt (2) counterclockwise to

remove the spare tire.

OLMB063003

➀ Jack handle

➁ Jack

Store the spare tire in the same com-

partment by turning the winged hold

down bolt (2) clockwise. Insert the

lock (1, if equipped) in to secure the

tire in place.

➂ Wheel lug nut wrench

The jack, jack handle, and wheel lug

nut wrench are stored in the luggage

compartment under the luggage box

cover.

To prevent the spare tire and tools

from “rattling,” store them in their

proper location.

The jack is provided for emergency

tire changing only.

6-16

Follow these steps to change your

vehicle’s tire:

Changing tires

WARNING

(Continued)

• ALWAYS place the jack on the

designated jacking positions

on the vehicle and NEVER on

the bumpers or any other part

of the vehicle for jacking sup-

port.

1.Park on a level, firm surface.

2.Move the shift lever into P (Park,

for automatic transaxle vehicle) or

neutral (for manual transaxle vehi-

cle), apply the parking brake, and

place the ignition switch in the

LOCK/OFF position.

A vehicle can slip or roll off of a

jack causing serious injury or

death to you or those nearby.

Take the following safety pre-

cautions:

• Do not start or run the engine

while the vehicle is on the

jack.

• Do not get under a vehicle

that is supported by a jack.

3.Press the hazard warning flasher

button.

• Do not allow anyone to remain

in the vehicle while it is on the

jack.

• NEVER attempt to change a

tire in the lane of traffic.

ALWAYS move the vehicle

completely off the road on

level, firm ground away from

traffic before trying to change

a tire. If you cannot find a

level, firm place off the road,

call a towing service for assis-

tance.

4.Remove the wheel lug nut wrench,

jack, jack handle, and spare tire

from the vehicle.

• Keep children away from the

road and the vehicle.

5.Block both the front and rear of the

tire diagonally opposite of the tire

you are changing.

6

• Be sure to use the jack pro-

vided with the vehicle.

(Continued)

6-17

What to do in an emergency

OLMB063007

OLMB063008

OLMB063009

6.Loosen the wheel lug nuts counter- 7.Place the jack at the designated 8.Insert the jack handle into the jack

clockwise one turn each in the

order shown above, but do not

remove any lug nuts until the tire

has been raised off of the ground.

jacking position under the frame

closest to the tire you are chang-

ing. The jacking positions are

plates welded to the frame with two

tabs and a raised dot. Never jack

any other position or part of the

vehicle.

and turn it clockwise, raising the

vehicle until the tire clears the

ground. Make sure the vehicle is

stable on the jack.

6-18

9.Loosen the lug nuts with the wheel

lug nut wrench and remove them

with your fingers. Remove the

wheel from the studs and lay it flat

on the ground out of the way.

Remove any dirt or debris from the

studs, mounting surfaces, and

wheel.

If you have a tire gauge, check the

tire pressure (see “Tires and Wheels”

in chapter 8 for tire pressure instruc-

tions.). If the pressure is lower or

higher than recommended, drive

slowly to the nearest service station

and adjust it to the recommended

pressure. Always reinstall the valve

cap after checking or adjusting tire

pressure. If the cap is not replaced,

air may leak from the tire. If you lose

a valve cap, buy another and install it

as soon as possible. After changing

tires, secure the flat tire and return

the jack and tools to their proper stor-

age locations.

10. Install the spare tire onto the

studs of the hub.

11. Tighten the lug nuts with your fin-

gers onto the studs with the

smaller end of the lug nuts clos-

est to the wheel.

OLMB063010

13. Use the wheel lug nut wrench to

tighten the lug nuts in the order

shown. Double-check each lug

nut until they are tight. After

changing tires, we recommend

that an authorized HYUNDAI

dealer tighten the lug nuts to their

proper torque as soon as possi-

ble. The wheel lug nut should

be tightened to 9~11 kg.m

(65~79 lb.ft).

12. Lower the vehicle to the ground

by turning the jack handle coun-

terclockwise.

6

✽

NOTICE

Check the tire pressure as soon as

possible after installing a spare tire.

Adjust it to the recommended pres-

sure.

6-19

What to do in an emergency

When driving with the compact spare

tire mounted to your vehicle:

Use of compact spare tires

(if equipped)

CAUTION

• Check the tire pressure after

installing the compact spare tire.

The compact spare tire should be

inflated to 420 kPa (60 psi).

Compact spare tires are designed for

emergency use only. Drive carefully

on the compact spare tire and

always follow the safety precautions.

Your vehicle has metric threads

on the studs and lug nuts. Make

certain during tire changing

that the same nuts that were

removed are reinstalled. If you

have to replace your lug nuts

make sure they have metric

threads to avoid damaging the

studs and ensure the wheel is

properly secured to the hub. We

recommend that you consult an

authorized HYUNDAI dealer for

assistance.

• Do not take this vehicle through an

automatic car wash while the com-

pact spare tire is installed.

WARNING

• Do not use the compact spare tire

on any other vehicle because this

tire has been designed especially

for your vehicle.

To prevent compact spare tire

failure and loss of control pos-

sibly resulting in an accident:

• Use the compact spare tire

only in an emergency.

• The compact spare tire’s tread life

is shorter than a regular tire.

Inspect your compact spare tire

regularly and replace worn com-

pact spare tires with the same size

and design, mounted on the same

wheel.

• NEVER operate your vehicle

over 80 km/h (50 mph).

If any of the equipment such as the

jack, lug nuts, studs, or other equip-

ment is damaged or in poor condi-

tion, do not attempt to change the

tire and call for assistance.

• Do not exceed the vehicle’s

maximum load rating or the

load carrying capacity shown

on the sidewall of the com-

pact spare tire.

• Do not use more than one compact

spare tire at a time.

• Do not use the compact spare

tire continuously. Repair or

replace the original tire as

soon as possible to avoid fail-

ure of the compact spare tire.

• Do not tow a trailer while the com-

pact spare tire is installed.

6-20

✽

NOTICE

CAUTION

When the original tire and wheel are

repaired and reinstalled on the vehi-

cle, the lug nut torque must be set

correctly to prevent wheel vibration.

To prevent damaging the com-

pact spare tire and your vehicle:

• Drive slowly enough for the

road conditions to avoid all

hazards, such as a potholes

or debris.

The

correct

lug

nut

tightening

torque is 9-11 kg.m (65-79 lb.ft).

• Avoid driving over obstacles.

The compact spare tire diame-

ter is smaller than the diame-

ter of a conventional tire and

reduces the ground clearance

approximately 25 mm (1 in).

• Do not use tire chains on the

compact spare tire. Because

of the smaller size, a tire chain

will not fit properly.

6

• Do not use the compact spare

tire on any other wheels, nor

should standard tires, snow

tires, wheel covers or trim

rings be used with the com-

pact spare wheel.

6-21

What to do in an emergency

1. Model Name

Jack label

2. Maximum allowable load

■ Example

• Type A

3. When using the jack, set your

parking brake.

4. When using the jack, stop the

engine.

5. Do not get under a vehicle that is

supported by a jack.

6. The designated locations under

the frame

OHYK064001

OHYK064005

OHYK064002

• Type B

7. When supporting the vehicle, the

base plate of jack must be vertical

under the lifting point.

8. Shift into Reverse gear on vehicles

with manual transaxle or move the

shift lever to the P position on

vehicles with automatic transaxle.

• Type C

9. The jack should be used on firm

level ground.

10. Jack manufacture

11. Production date

12. Representative company and

address

❈ The actual Jack label in the vehicle may differ from the illustration.

For more detailed specifications, refer to the label attached to the jack.

6-22

EC declaration of conformity for Jack

6

JACKDOC14S

6-23

What to do in an emergency -> If You Have a Flat Tire for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals