2013-2018 Kia Ceed SUV Driving your vehicle -> Engine start/stop button position User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Engine start/stop button position for Your Kia Ceed SUV Second Generation (2013-2018)

JD eng 5.QXP 3/4/2015 2:50 PM Page 9  
Driving your vehicle  
ENGINE START/STOP BUTTON (IF EQUIPPED)  
Vehicles equipped with anti-theft steering  
column lock  
Engine start/stop button position  
OFF  
The steering wheel locks when the  
engine start/stop button is in the OFF  
position to protect you against theft.  
It locks when the door is opened.  
White  
If the steering wheel is not locked prop-  
erly when you open the driver's door, the  
warning chime will sound. Try locking the  
steering wheel again. If the problem is  
not solved, we recommend that the sys-  
tem be checked by an authorized Kia  
dealer.  
With manual transaxle  
To turn off the engine (START/RUN posi-  
tion) or vehicle power (ON position), stop  
the vehicle then press the engine  
start/stop button.  
OJD052001  
Illuminated engine start/stop but-  
ton  
In addition, if the engine start/stop button  
is in the OFF position after the driver's  
door is opened, the steering wheel will  
not lock and the warning chime will  
sound. In such a situation, close the door.  
Then the steering wheel will lock and the  
warning chime will stop.  
With automatic transaxle/DCT*  
Whenever the front door is opened, the  
engine start/stop button will illuminate for  
your convenience. The light will go off  
after about 30 seconds when the door is  
closed. It will also go off immediately  
when the theft-alarm system is armed.  
To turn off the engine (START/RUN posi-  
tion) or vehicle power (ON position),  
press the engine start/stop button with  
the shift lever in the P (Park) position.  
When you press the engine start/stop  
button without the shift lever in the P  
(Park) position, the engine start/stop but-  
ton will not change to the OFF position  
but to the ACC position.  
✽
NOTICE  
If the steering wheel doesn't unlock  
properly, the engine start/stop button  
will not work. Press the engine  
start/stop button while turning the  
steering wheel right and left to release  
the tension.  
* DCT: Double clutch transmission  
5 9  
JD eng 5.QXP 3/4/2015 2:50 PM Page 10  
Driving your vehicle  
ACC(Accessory)  
ON  
CAUTION  
You are able to turn off the engine  
(START/RUN) or vehicle power (ON),  
only when the vehicle is not in  
motion. In an emergency situation  
while the vehicle is in motion, you are  
able to turn the engine off and to the  
ACC position by pressing the engine  
start/stop button for more than 2 sec-  
onds or 3 times successively within 3  
seconds. If the vehicle is still moving,  
you can restart the engine without  
depressing the brake pedal by press-  
ing the engine start/stop button with  
the shift lever in the N (Neutral) posi-  
tion.  
Orange  
Blue  
With manual transaxle  
With manual transaxle  
Press the engine start/stop button when  
the button is in the OFF position without  
depressing the clutch pedal.  
Press the engine start/stop button when  
the button is in the ACC position without  
depressing the clutch pedal.  
With automatic transaxle/DCT  
With automatic transaxle/DCT  
Press the engine start/stop button while it  
is in the OFF position without depressing  
the brake pedal.  
Press the engine start/stop button while it  
is in the ACC position without depressing  
the brake pedal.  
The steering wheel unlocks (if equipped  
with anti-theft steering column lock) and  
electrical accessories are operational.  
If the engine start/stop button is in the  
ACC position for more than 1 hour, the  
button is turned off automatically to pre-  
vent battery discharge.  
The warning lights can be checked  
before the engine is started. Do not leave  
the engine start/stop button in the ON  
position for a long time. The battery may  
discharge, because the engine is not  
running.  
5 10  
JD eng 5.QXP 3/4/2015 2:50 PM Page 11  
Driving your vehicle  
START/RUN  
✽
NOTICE  
(Continued)  
If you leave the engine start/stop button  
in the ACC or ON position for a long  
time, the battery will discharge.  
• Never reach for the engine start/  
stop button or any other controls  
through the steering wheel while  
the vehicle is in motion.The pres-  
ence of your hand or arm in the  
area could cause loss of vehicle  
control, an accident and serious  
bodily injury or death.  
Not illuminated  
WARNING  
With manual transaxle  
• Never press the engine start/stop  
button while the vehicle is in  
motion. This would result in loss  
of directional control and braking  
function, which could cause an  
accident.  
To start the engine, depress the clutch  
pedal and brake pedal, then press the  
engine start/stop button with the shift  
lever in the N (Neutral) position.  
• Do not place any movable objects  
around the driver's seat as they  
may move while driving, interfere  
with the driver and lead to an  
accident.  
With automatic transaxle/DCT  
• The anti-theft steering column  
lock (if equipped) is not a substi-  
tute for the parking brake. Before  
leaving the driver's seat, always  
make sure the shift lever is  
engaged in P (Park), set the park-  
ing brake fully and shut the  
engine off. Unexpected and sud-  
den vehicle movement may occur  
if these precautions are not  
taken.  
To start the engine, depress the brake  
pedal and press the engine start/stop  
button with the shift lever in the P (Park)  
or the N (Neutral) position. For your safe-  
ty, start the engine with the shift lever in  
the P (Park) position.  
✽
NOTICE  
If you press the engine start/stop button  
without depressing the clutch pedal for  
manual transaxle vehicles or without  
depressing the brake pedal for automat-  
ic transaxle vehicles, the engine will not  
start and the engine start/stop button  
changes as follow:  
(Continued)  
OFF ➔ACC ➔ ON ➔➔ OFF or ACC  
5 11  

Related Topics

Popular Owner Manuals