JD eng 5.QXP 3/4/2015 2:52 PM Page 61
Driving your vehicle
• Light reflects from the water on the
road.
The LDWS does not operate
when:
• The lens or windshield is stained with
foreign matter.
• The driver turns on the turn signal to
change lane.
• The sensor can not detect the lane
because of fog, heavy rain or heavy
snow.
But, when the hazard warning flasher
is operating, the LDWS operates nor-
mally.
• The surrounding temperature of the
inside rear view mirror is high due to a
direct ray of light.
• Driving on the lane line.
✽
NOTICE
To change lane, operate the turn signal
switch, then change the lane.
• The lane is very wide or narrow.
• The lane line is damaged or indistinct.
OJD052056
Warning indicator
• The shadow is on the lane line by a
median strip.
The LDWS may not warn you even
comes on (yellow indicator), the LDWS is if the vehicle leaves the lane, or
If the LDWS FAIL warning indicator
• There is a mark similar to a lane line.
• There is a boundary structure.
not working properly. We recommend
that the system be checked by an author-
ized Kia dealer.
may warn you even if the vehicle
does not leave the lane when:
• The distance from vehicle ahead is
very short or the vehicle ahead hides
the lane line.
• The lane is not visible due to snow, rain,
stain, a puddle or many other things.
• The vehicle shakes heavily.
• The brightness of the outside changes
suddenly.
• The lane number increases or decreas-
es or the lane lines are crossing com-
plicatedly.
• Not turning on the headlight even at
night or in the tunnel.
• Putting something on the dashboard.
• Driving with the sun in front of you.
• Driving in areas under construction.
• Difficult to distinguish the color of the
lane from the road.
• Driving on a steep grade or a curve.
• The lane line is more than two in either
side (Left/Right).
5 61
English 
